Search results
Jump to navigation
Jump to search
- ...01/debian_builds/releases Mrfixit2001's Debian Minimal Release] (note: can be updated to a more recent Debian using the regular updating tools, except fo The blue LED can be controlled with via the sysfs (''/sys/devices/platform/leds/leds/power/brig6 KB (867 words) - 15:47, 20 February 2023
- * Other display technology could be explored. ...be a target platform for unclipped IBNIZ demoscene programmes, which would be really fun to play around with on one's wrist!5 KB (760 words) - 00:49, 16 March 2023
- There are also a number of mods that can be done adding more functions by adding extra hardware to the pogo pins, and a There are hopefully videos coming doing it the proper way, and so they can be linked here.4 KB (620 words) - 03:14, 16 March 2023
- ...ackers on any device exposed to the public Internet. Exposed devices might be attacked within minutes after being exposed. Typically such attacks try def ...r existing one. You probably do not want to do this, as you will no longer be able to use your existing key pair for authentication.3 KB (442 words) - 16:39, 20 February 2023
- ...ound the corners and sides. Once the sides and top are released, it should be possible to carefully tilt up and slide the chassis out of the bottom of th ...ts of double sided tape to "secure" it. You might want something stronger. Be sure the wires will reach the battery connector.2 KB (452 words) - 18:19, 11 May 2023
- ...below 75°C instead. The memory has no temperature sensor, but will likely be cooled quite a bit as well. ...you'll need to logic level shift the output PWM signal as the 5V fan will be expecting 5V PWM on the PWM pin.3 KB (592 words) - 21:29, 2 April 2023
- The installation instructions can be found under [[PineTab#Installation instructions]]. * The latest image can be downloaded [https://github.com/dreemurrs-embedded/Pine64-Arch/releases here5 KB (779 words) - 09:58, 9 December 2023
- ...nd GNU/Linux. It may be compatible with Apple systems, but this has yet to be documented. ...ing another audio device obviates the need for the audio device default to be restored on reboot, which did not work on xfce4. 9/10.5 KB (755 words) - 17:20, 15 January 2024
- This guide will be especially useful if you are looking to overclock the ram on your PinePhone ...with which you can grab the needed package names from, however you should be able to follow these instructions with these packages installed: <code>buil4 KB (693 words) - 21:18, 2 April 2023
- ...e developers primarily, and should describe how to design your firmware to be interoperable with the rest.958 bytes (125 words) - 19:58, 17 October 2020
- * The root filesystem of the distribution of your choice. This can be on the same filesystem as your kernel and device tree if using ''extlinux.c ...inux running on the board, not some vendor provided kernel that will never be receiving updates. A mainline-first approach allows for the boards to conti5 KB (736 words) - 15:10, 26 September 2023
- ...n added which allows the user to customise the sidebar. These settings can be accessed by long pressing on the watchface which will display two buttons, ...al and black, and a cross which closes the settings interface. It can also be closed using the physical button.3 KB (478 words) - 08:11, 20 May 2023
- These instructions can be followed to install Arch Linux ARM on an SD Card, USB Flash Drive, eMMC, or ...s to be run as a normal user are prefixed with <code>$</code>, commands to be run as root (or with <code>sudo</code>) are prefixed with <code>#</code>.5 KB (851 words) - 16:53, 4 April 2023
- ...both CC1 and CC2 are pulled high. In normal usage, either CC1 or CC2 will be floating since these are the connector rotation pins. When both are detecte ...UARTs to pins on the USB-C connector. In all other cases, the UART should be disconnected. It also requires the PINE64 Store ship a simple one-sided (no5 KB (839 words) - 21:01, 12 January 2023
- A serial console can be established with 1152008N1 (no hardware flow control). Login credentials ar Motion daemon can be enabled using systemctl (With root) <code>systemctl enable motion</code>. S3 KB (509 words) - 10:43, 30 March 2023
- ...o be cleaned up and updated, and OS-specific information and tweaks should be moved elsewhere}} We'll be using smaeul's kernel + some additional patches provided by DorianRudolph,9 KB (1,407 words) - 18:55, 14 April 2023
- * Provide a read-only factory image we'll be able to restore in case of unrecoverable errors during OTA * Boot log is currently not used. Can be use to provide reboot logs to the application9 KB (1,432 words) - 04:17, 30 November 2020
- High contrast style for eink-devices can be found [https://github.com/MichiMolle/gtk3-eink here]. High contrast style for eink-devices can be found [https://github.com/MichiMolle/gtk4-eink here].5 KB (721 words) - 06:12, 30 July 2023
- .... The state of PL6 at boot can be used to distinguish between v1.1 (it can be pulled high) and v1.2 (it will remain low). # PL2 is now connected to the WiFi module's reset pin, allowing the WiFi to be turned off or reset in software.5 KB (926 words) - 23:44, 24 December 2023
- ...can be manually toggled on/off and the keyboard’s battery charge level can be read in the supported operating systems; the keyboard remains functional wi ...erprint sensor, which uses open firmware for it's i2c bridge, and can also be used for gesture navigation thanks to it's ability to detect directional sw6 KB (825 words) - 00:36, 16 March 2023
- ...a lot of experience and thought put into the system already, and it would be good to leverage that for other projects as well, once they are ready to lo As I think it would be sad to leave such valuable info in the backlog of the chat, I would like to9 KB (1,488 words) - 18:34, 4 April 2023
- ...will also need libncurses.so.5. The easiest way to install this appears to be using an Arch AUR package. For QUARTZ64-model-A_eink.android11_SDK the following files will need to be updated:-2 KB (340 words) - 16:45, 20 February 2023
- # Requires confirmation: [[Project Don't be evil|"Project Don't Be Evil" devkit]] ...-marked" and "managed active cables"); they contain a chip, which needs to be powered. This is done by having one of the cable end connect its CC pins to5 KB (747 words) - 07:39, 17 March 2023
- The GitHub page can be found here: [https://github.com/dreemurrs-embedded/Pine64-Arch/ dreemurrs-e ...er and the desired desktop environment. The ARM64 version of Gentoo has to be selected. The PinePhone Pro will not boot with P-Boot but will boot with U-11 KB (1,617 words) - 09:57, 9 December 2023
- ...isplay, portraying the output voltage and amps. The display back light can be turned on and off by capacitive touch button, located on the top left side ...at can be disconnected from the main PCB. The wireless charging PCB has to be de-soldered, or forcefully removed from the inner casing, as it is glued to6 KB (910 words) - 21:33, 26 July 2023
- # Ordering 2-3 might be a good idea in case the first one is damaged during install (if all goes we ...dymium magnets], just two 8x2.7mm at 8:00PM and 12:00PM on the stand could be enough. Experimentation is needed. Start with just one small magnet and inc5 KB (801 words) - 22:13, 18 June 2023
- Flashing can be done with any of All the zips you need can be found from the [https://wasp-os.readthedocs.io/en/latest/install.html#binar4 KB (654 words) - 14:42, 15 November 2022
- ...sensor coordinate systems into body coordinates, 'mount matrices' have to be defined. accel_x: (input, index: 0, format: be:S16/16>>0)8 KB (861 words) - 16:41, 20 February 2023
- The installation instructions can be found under [[PineTab2#Installation instructions]]. The PineTab2 ships with ''Danctnix Arch Linux ARM''. The factory image can be found here:8 KB (1,162 words) - 10:26, 3 September 2023
- ...Pro64]] single-board computer from an ATX power supply allows the board to be powered with more than just two disks, and is a reliable and safe way to po ...ts have been made to write reliable, safe instructions, the authors cannot be held liable for the quality of procured components or the assembly job of t3 KB (449 words) - 16:42, 20 February 2023
- ...ale) cable to plug it into your computer. Note that the Micro-USB port can be used only for power because the data lines are not connected. ...hen connected to a computer via USB-A port. You can set up the computer to be in the same network as PineCube and connect to PineCube via SSH and/or Stre10 KB (1,452 words) - 10:30, 30 March 2023
- ...d]] and print yourself. Recommended material is PLA, excellent results can be obtained using a 0.25mm nozzle, though slightly larger sizes should work fi To use the pegs, open your case and remove the ROCK64 from within. Be sure to pull out the light guide and rubber plug to remove it, or else it w4 KB (747 words) - 13:17, 5 February 2023
- * USB/UART Programming/Console Adapter (PMPROG01) driver can be [https://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx D * Termite can be downloaded at [http://www.compuphase.com/software_termite.htm CompuPhase We8 KB (1,349 words) - 16:54, 20 February 2023
- The Quartz64 model A can be made to fit this case, however some filing of one of the holes is necessary1,013 bytes (174 words) - 19:00, 20 February 2023
- The PineTime Dev Kit comes with the back not glued down to allow it to be easily reprogrammed, however the kit does not include an hardware programme ...') port ''4444'' using telnet and invoke OpenOCD commands. GDB should also be available on port ''3333''.8 KB (1,222 words) - 03:02, 16 March 2023
- ...EU and Asia in particular, require the entirety of the modem's firmware to be licensed. Therefore, the PinePhone cannot ship with an unlicensed firmware, | Some settings are stored here, along with commands that need to be picked by LK on next boot (to reboot to fastboot or recovery mode)9 KB (1,443 words) - 13:35, 16 March 2023
- | https://youtu.be/4aFDjymXjOw | https://youtu.be/gUVEz-pxhgg7 KB (1,024 words) - 05:08, 21 April 2023
- # '''On the PinePhone Pro''': The eMMC might have to be overruled to boot from the microSD card, see [[PinePhone Pro#Boot order]] {{Info|At this the image file does not have to be extracted from the archive format. Balena Etcher handles the extracting aut12 KB (1,957 words) - 14:50, 12 August 2023
- ...inux running on the board, not some vendor provided kernel that will never be receiving updates. A mainline-first approach allows for the boards to conti ...Before NetBSD 10 is released, the latest version of NetBSD-current should be used.9 KB (1,424 words) - 15:00, 26 September 2023
- ...plan on using it. Don't bend the wires too much as they're thin, you won't be able to reconnect it. Keep in mind that keeping it connected during develop The Pogo Pins are meant to be connected temporarily to PineTime's SWD port for firmware flashing and simp4 KB (737 words) - 06:26, 18 May 2022
- ...n the read-only root filesystem is unsupported on Ubuntu Touch. You should be able to find updates in System Settings -> Updates and new applications in Naturally, you should be wary of enabling ssh for security reasons but everything is there. Almost.5 KB (742 words) - 23:20, 29 January 2023
- Some of the known issues can be fixed with more or less involved hardware modifications: ...o be some hardware feature that can distinguish the two versions. This can be as simple as an I/O pin that is pulled differently by default between v1.114 KB (2,411 words) - 15:20, 27 February 2023
- For the display to be used, you need to tell the kernel about it by modifying the device tree. Th The kernel needs to be built with <code>CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D</code> turned on3 KB (474 words) - 21:58, 2 April 2023
- ...''PINE64's'' smartphone, the [[PinePhone]] Development Kit. Project Don't be evil is an actual smartphone developer kit for the PINE64 Smartphone dubbed * Second phase - purpose-built development kit code named "Don't be evil" and introduced at FOSDEM 201913 KB (1,945 words) - 20:24, 12 April 2023
- ...eo-playback.md video playback here.] For your ROCKPro64 the install should be To avoid this issue, a simple [[ROCKPro64 Serial Buffer Circuit]] can be installed between the RockPro64 and the serial adapter.}}12 KB (1,905 words) - 07:04, 25 September 2023
- ...any questions asked every week in the live Pinecil chat channel. There may be better alternatives depending on your part of the world, but this gives an ...gs that can fully open like a sandwich when unzipped which allows tools to be easily seen and retrieved. Bags that only partially unzip make it harder to5 KB (810 words) - 09:16, 19 May 2023
- ...s hosted on the PinePhone itself, so resize your images. An easy way might be to take a screenshot of your image viewer and send that image instead. ...ree accounts on matrix.org should work fine for example. Sleep may need to be disabled for non-local servers or the bridge can get stuck.7 KB (1,134 words) - 01:04, 16 March 2023
- ...mance, but not carry as much risk (Still: Do at your own risk!). It should be noted however that overclocking can cause instability, so you will need to ...are targeting the PinePhone to simplify the explanation, however they can be used to also overclock other devices such as the Pinetab if you modify the11 KB (1,880 words) - 08:37, 29 November 2023
- It may be a good idea to create an image of the eMMC in case you want to flash it bac To be able to boot from the microSD card easily it is recommend to wipe the bootl7 KB (1,144 words) - 21:57, 2 April 2023
- The [[Quartz64|Quartz64 Model A]] allows for it to be powered from a single-cell 3.7V lithium-polymer battery. Because of [https: ...e header labelled ''+VBAT-''. As one might guess, the positive wire should be towards the +, and the ground wire towards -. The center pin of the connect5 KB (685 words) - 22:04, 2 April 2023
- {{Info|The installation guide can be found [https://docs.nemslinux.com/installation here].}} * More information and instructions can be found in the repo readme: https://github.com/alistair23/meta-pine64/#buildi5 KB (793 words) - 21:33, 2 April 2023
- ...m all PINE64 community platforms. If deemed necessary, a permanent ban can be issued without a prior notice. In extreme circumstances - such as those inv .../ DM to issue a warning. In extreme circumstances, moderation actions will be taken without issuing prior warnings.14 KB (2,276 words) - 17:15, 2 March 2022
- The [[PineCube]] can be used as a recorder for loud noises. If you have a kernel that has the sound1 KB (191 words) - 10:32, 30 March 2023
- The result of these changes would be that: # The always-on part of the ANX7688 chip (AVDD33, DVDD1V8) will always be powered10 KB (1,659 words) - 14:57, 26 April 2021
- ...t encoding and decoding of videos. Hardware-accelerated video decoding can be useful to get smoother video playback on your devices, lower power consumpt ...bring a open source Allwinner VPU driver to mainline Linux, which came to be called Cedrus. The Cedrus media driver (For Allwinner SOCs such as A64) sup10 KB (1,483 words) - 15:18, 4 November 2023
- {{note|'''Note:''' U-Boot on Quartz64 Model A currently doesn't appear to be able to always load things from USB mass storage devices depending on the d ...ing panfrost clk errors in dmesg while installer boots, unsure if GPU will be happy6 KB (928 words) - 11:39, 5 August 2023
- ...in community discussions, please be patient and do not expect questions to be answered immediately, certainly, or currently. More precisely: * Whether your questions will be answered and whether the answers are right and definitive, depends on the i9 KB (1,413 words) - 04:30, 12 November 2023
- ...r a Network Attached Storage (NAS) or Desktop application, but it can also be used in a number of other server capacities. It is built from precision-cut ...ew of the NAS Case, illustrating how all the components come together, can be found [http://files.pine64.org/doc/rockpro64/ROCKPro64%20NAS%20Case%20Explo13 KB (2,282 words) - 17:49, 20 February 2023
- ...tus of different parts of the phone. Some parts are waiting on a driver to be written or ported, others only need various adjustments. ...ption boot selection using volume keys. [https://xnux.eu/log/#049 You will be able to switch between kernels quickly without swapping uSD cards, which is6 KB (904 words) - 00:12, 15 August 2022
- ...ips with ''Factory Test Code''. The factory test reference source code can be found here:2 KB (239 words) - 11:40, 23 August 2023
- ...can be manually toggled on/off and the keyboard’s battery charge level can be read in the supported operating systems; the keyboard remains functional wi ...discouraged for the same reason. Technical details regarding the issue can be found in the blog post of the developer ''megi'' [http://xnux.eu/log/072.ht16 KB (2,555 words) - 11:01, 21 October 2023
- ...tted for non-commercial use. Other variants than the official logotype may be used for commercial use following an inquiry with PINE64 Community represen ...s restricted to official PINE64 portals and community services. It may not be copied or imitated by community run services such as forums or websites.12 KB (1,831 words) - 01:12, 16 March 2023
- This will not be a complete guide, as it borrows heavily on [[Pinebook Pro Installing Arch L Only the steps that are different are listed here. Be careful, the numbering of the sections is not the same.5 KB (710 words) - 15:34, 20 February 2023
- ...0 seconds and then wake it up. More information on the rtcwake command can be found in the [https://linux.die.net/man/8/rtcwake man pages]1 KB (217 words) - 08:42, 14 June 2021
- '''Mainline Hardware Encoding''' of video can be achieved through the V4L2 user-space API, for which currently only GStreame With GStreamer, in general, any V4L2 control can be set using the <code>extra-controls=foo,name=value</code> syntax after the e4 KB (596 words) - 04:01, 5 September 2023
- ...r a Network Attached Storage (NAS) or Desktop application, but it can also be used in a number of other server capacities. It is built from precision-cut ...ew of the NAS Case, illustrating how all the components come together, can be found [http://files.pine64.org/doc/rockpro64/ROCKPro64%20NAS%20Case%20Explo13 KB (2,292 words) - 19:57, 1 August 2023
- ...older bootloader. This features green text 'PINE TIME' on boot, and should be updated to the new bootloader as described below.''' ...1 were pre-installed with InfiniTime 1.2 and the new bootloader, which can be identified by the green Pinecone image on boot. The instructions below are9 KB (1,486 words) - 00:53, 16 March 2023
- ...usual marketplaces for cheap. It exposes 8 additional GPIO lines, and can be daisy chained to up to 8 devices, giving you an additional 64 GPIO outputs. ...ere's no manual intervention needed on your part to have your modification be carried forward.9 KB (1,418 words) - 21:39, 2 April 2023
- ...ds because there might be stability issues with gen 2 speeds. The port can be switched back to gen 2 speeds by adding the following device tree overlay. The RK3399 can be overclocked. See here for details: [[Overclocking#RK3399-based devices]].15 KB (1,990 words) - 10:53, 24 October 2023
- The 3D model can be used for a wide variety of purposes, for example for product renderings:3 KB (407 words) - 20:11, 20 February 2023
- ...function row, FN key functionality, meta key (where the Windows key would be) and all of the keys you need for daily use. ...ause the PineTab uses the mainline kernel), only few of them will actually be usable on Early Adopters PineTab, due to specifics of working with LCD pane9 KB (1,373 words) - 09:50, 9 December 2023
- ...atus]]) is expected, only modules relevant to the PineNote hardware should be listed here. | WIP patches for activation on the Pinenote/dithering/Y4-conversion can be found here: <sup>[https://github.com/m-weigand/linux/commits/mw/rk35/rk356x11 KB (1,638 words) - 23:34, 7 April 2023
- ...is article aims to explain all the fine points so that the behaviour could be understood and dealt with. ...your laptop load at any given moment, so the only value provided that can be trusted is the voltage.10 KB (1,661 words) - 22:28, 8 November 2023
- These fields can be seen in U-Boot '''tools/rkcommon.c'''. ...in eFuses, which means that it is most likely broken (expert review would be appreciated).9 KB (1,425 words) - 05:51, 1 November 2023
- ...omponent shortage as a result, the magnetometer in the Beta Edition had to be replaced from an LIS3MDL to an AF8133J.2 KB (257 words) - 15:23, 27 February 2023
- Please note than only one power input may be used at once. The barrel-style jack is additionally protected by a built-i ...ies and the Clusterboard. Keep in mind that rechargeable batteries cannot be used because there is no charging circuitry for them on the Clusterboard.12 KB (1,868 words) - 05:49, 1 November 2023
- ...r wireless charging component. They also designed COPO CP2021 component to be used. You also need a bunch of other components, such as resistors and of c2 KB (276 words) - 15:05, 2 April 2023
- ...tal device and lacks dedicated working software – it should therefore only be purchased by people interested in helping with the bring-up process of Linu The releases for the PineTab-V can be found under [[PineTab-V Releases]].7 KB (1,105 words) - 03:32, 28 September 2023
- ...h of the previously mentioned tool. Wash the tips with soap and water, but be careful, they easily drip from your hand to drain. After drying them, caref {{Info|1=A video tutorial regarding the disassembly can be watched from ''Linux Lounge'' [https://www.youtube.com/watch?v=xXxRGXWvdVw&8 KB (1,213 words) - 21:29, 20 April 2023
- A lot of getting the PineNote to work nicely will be theming things appropriately. Please list themes for various components her | GPU libs (mesa) and mutter rely on patched packages. These should not be updated via the package manager at the moment, make sure to exclude them.5 KB (702 words) - 19:45, 12 November 2023
- ...plays''' are displays that follow the MIPI-DSI standard. Such displays can be connected to various PINE64 Single Board Computers.2 KB (214 words) - 21:59, 2 April 2023
- ...attempt to use both rear ports at the same time or the PC and Pinecil will be damaged.}} ...to check for updates regularly as development is very active and there may be enhancements or bug fixes.22 KB (3,700 words) - 16:09, 16 December 2023
- ...files shipped with the PineNote. Adding support for this to the tool would be helpful. ...umentation/ddi0487/gb/ ARM Architecture Reference Manual for ARMv8] should be used as reference for any instructions.11 KB (1,769 words) - 21:43, 2 April 2023
- The diagram shows they must be connected to a 3.3V source in parallel, mediated by resistors. An example of this product can be found [https://pmdway.com/products/usb-3-1-type-c-male-to-female-breakout-t12 KB (2,051 words) - 21:17, 14 October 2023
- ...stem and a distribution of Free Software. The forum thread for release can be found [https://forum.pine64.org/showthread.php?tid=14341 here]. * Bootloader must be installed separately after installation, before rebooting.12 KB (1,652 words) - 14:57, 26 September 2023
- ...corrupted, you cannot get to Maskrom without opening up the device (it can be opened using spudger and a bit of patience). If you used the magnetic switch method be sure to remove the pen/magnet before rebooting.15 KB (2,430 words) - 15:21, 24 October 2023
- ...oms staffing). Currently, members report about 2-3 weeks, as always it can be held up in the customs department of your country if you are shipping it fr ...ys to show a hand off from China Post to a USA facility. The message would be more clear if it was "outbound imports transferred/complete".4 KB (744 words) - 02:22, 31 March 2023
- ...tal circuits are disconnected from the connector, and the 14 bold pins can be used to expose debug related signals (e.g. JTAG interface)." 7:48:17 PM <dsimic> so, it should be possible to route the serial port24 KB (3,830 words) - 21:12, 12 January 2023
- ...d Rockchip RK3566 SoC. The upstreaming status of the SoC functionality can be found on the [[Quartz64 Development#Upstreaming Status|Quartz64 development ...on it. The software shipping from the factory for the first batch will not be suitable for taking notes, reading e-books, or writing your dissertation. I16 KB (2,333 words) - 02:20, 14 October 2023
- ...is in the same package as the power cable in a second compartment and can be a bit hidden. The PineTab2 can be started by pressing and holding the power button for two seconds. The devic15 KB (2,304 words) - 11:16, 23 October 2023
- ...s to be run as a normal user are prefixed with <code>$</code>, commands to be run as root are prefixed with <code>#</code>. We assume your target device4 KB (640 words) - 02:52, 25 May 2023
- ..." style="background:LightYellow; text-align:center;"|Linux Mainline; Could be improved ...tus of different parts of the board. Some parts are waiting on a driver to be written or ported, others only need various adjustments.21 KB (3,171 words) - 14:48, 8 October 2023
- * Note: RAM will be clocked slower, since the Allwinner A64 only supports up to 3GB DDR3-1333 ( * Note: This part is marked as optional in the schematic and may not be included.19 KB (2,610 words) - 03:51, 25 December 2023
- ...o stack two or more of these enclosures, the screws that serve as feet can be replaced by M8-1.25x16mm grub screws.2 KB (278 words) - 16:22, 20 February 2023
- ...otable microSD slot. The module features a SODIMM-DDR3 form-factor and can be paired with either the [[SOPINE Baseboard]], the [[Clusterboard]] or a cust ...le has a five-year LTS (long-term supply) status, which means that it will be supplied to 2022 at the very least. There is a one-year warranty period for8 KB (1,243 words) - 06:55, 1 November 2023
- More information can be found on the [https://linux-sunxi.org/Pine_Pinebook sunxi wiki]. * Storage Memory: 16GB eMMC module, can be upgrade to 32GB or 64GB eMMC module13 KB (1,957 words) - 17:15, 27 June 2023
- ...s to be run as a normal user are prefixed with <code>$</code>, commands to be run as root are prefixed with <code>#</code>. We assume your target device4 KB (710 words) - 19:02, 20 February 2023
- Then the display will be on LCD and not HDMI2 KB (350 words) - 19:42, 20 February 2023
- This should be it. The Pinetab2 will show you the new device and the network connects to ` * Select "USB" and select On under USB tethering (Note: This option will be greyed out unless connected to the PineTab2)13 KB (2,116 words) - 21:10, 15 December 2023
- ...code>, the function in the vb2 API to call when a frame is finished, would be called. In the rkisp1 code, <code>vb2_buffer_done</code> is only called fro ...isp1/rkisp1-common.h#L335-L363 error/debug counters] in debugfs, which can be viewed at <code>/sys/kernel/debug/ff910000.isp0</code>.13 KB (2,123 words) - 16:41, 20 February 2023