Search results
Jump to navigation
Jump to search
Page title matches
- ...''PINE64's'' smartphone, the [[PinePhone]] Development Kit. Project Don't be evil is an actual smartphone developer kit for the PINE64 Smartphone dubbed * Second phase - purpose-built development kit code named "Don't be evil" and introduced at FOSDEM 201913 KB (1,945 words) - 20:24, 12 April 2023
Page text matches
- I think it should be more emphasized that 1st idbloader/uboot found is only one used, all others Should there not also be example for idbloader, uboot.img, trust.img?240 bytes (43 words) - 15:48, 27 October 2020
- ...irst, the default thresholds for CPU thermal throttling on a PinePhone can be checked using the following commands: ...to become very hot even under light CPU load. The following commands can be used to configure more restrictive CPU thermal throttling:2 KB (300 words) - 19:50, 20 February 2023
File:BlispArguments.png Arguments that can be used with Blisp ...port (COM in windows, ttyACM in Linux). This example is COM3 but it could be different, check the Windows device manager).(925 × 185 (19 KB)) - 21:03, 20 April 2023- Contributions can be made to the documentation pages by editing the files on the git instance, w The wiki can still be used to document community projects and to collaborate.781 bytes (105 words) - 22:37, 7 April 2023
- This template should be added at the very beginning of all template pages between 'noinclude' tags: ...iption of the template, usage instructions, and output example should also be added between the 'noinclude' tags (as in this template).1 KB (145 words) - 15:32, 11 October 2020
- Hey! Welcome to my profile, though I think you'd be better off stalking me somewhere else.184 bytes (28 words) - 09:29, 25 March 2023
- I forgot to add it to the drawing, but there will also be a cut out for the speaker and microphone. ...re needs to be written, but from how I understand it, it doesn't appear to be too complex.2 KB (269 words) - 15:18, 23 September 2020
- and the number of contact points that can be distinguished. Assuming that the pixels are square, the screen dimensions should be about 2.68" by 5.37".2 KB (266 words) - 00:35, 16 March 2023
File:Hall-effect-sensor03.jpg Be mindful not to damage the via holes above the 3 leg side.(634 × 1,286 (102 KB)) - 01:10, 18 March 2023- ...very close clones. Primarily to keep track of which devices could possibly be "jailbroken" and run PineTime firmware. Seems to be PineTime hardware, interesting GUI, seems DaFit-y635 bytes (101 words) - 00:49, 16 March 2023
File:Pinephone-1.1-flash-schematic.png Schematic view of the Pinephone v1.1 (Don't be Evil) devkit's flash LED driver(509 × 356 (34 KB)) - 13:57, 20 February 2023- ...cipes/releases m-weigand/pinenote-debian-recipes/releases]. This image can be flashed using rkdeveloptool. * A Debian-based minimalistic rootfs/disc image can be built using <code>debos</code> using the work from [https://salsa.debian.o1,002 bytes (134 words) - 08:50, 17 January 2023
- ...n shell of the device, a damaged shell had the keyboard removed from it to be studied. ...plastic layer that appears to be removable but more research will need to be done.3 KB (617 words) - 19:35, 20 February 2023
- {{Template:Hint|This page will probably be organized better once I'm closer to completing this project, so check back ...dd all cases. The only problem is that the wireless charging case will not be able to charge the phone itself for reasons covered [[User:EnthusiasticGeek3 KB (526 words) - 18:39, 20 February 2023
- - But some firmware (wasp-os, ATCwatch) require Nordic SoftDevice to be installed to support the BLE and DFU functions == How do we allow SoftDevice-based firmware to be flashed to PineTime via DFU? ==4 KB (591 words) - 20:43, 17 October 2020
- ...ages under Arch-based distributions, the package manager <i>pacman</i> can be used: Note: <code> sudo pacman -Syu --cachedir /path/to/external</code> can be used for a separate download location to improve installation speed, otherw1 KB (197 words) - 10:22, 16 September 2023
File:Martijnpocket.jpg Martijn with a Project don't be evil Pinephone devkit in his pocket(1,512 × 2,016 (1.34 MB)) - 15:58, 20 February 2023
File:Schematic VCONN switches.png Excerpt from the PinePhone schematic showing switches that need to be replaced prior to PCB revision 1.2a(1,495 × 318 (66 KB)) - 17:42, 20 February 2023- Would it be possible to upload a .diff with said patches?240 bytes (30 words) - 21:27, 20 February 2023
- ...ed release is [[:Category:Outdated release|outdated]] and should no longer be used![[Category:Outdated release]]182 bytes (25 words) - 21:27, 2 February 2023
File:Show-hidden.png ...at Windows may have already assigned to unknown devices/software that may be causing conflicts or no longer used or needed.(274 × 267 (18 KB)) - 22:50, 27 May 2023- ...o some excessive changes you made in the article [[PinePhone Pro]]. Please be aware that the article is read by a large number of users and its contents Since you appear to be a new user I would recommend you to check everything out first. Please ask873 bytes (145 words) - 17:19, 6 February 2022
- Feel free to create the talk page if necessary, will be archived when conversation is finished. ...er red-links. presumably other notices will generate, but this is one I'll be looking for.1,017 bytes (136 words) - 02:22, 2 July 2022
- ...as your first port of call, it is almost guaranteed that there will always be someone else who has or will have the problem or question you have, so the ...to try your luck at a more real-time response, depending on who happens to be awake and online.842 bytes (155 words) - 18:34, 20 February 2023
- ...r subsystem which stores weather data on the watch in a timeline which can be queried by apps or watchfaces. It can store many different types of data (s Weather data must be sent to the watch via a companion app, currently Gadgetbridge and ITD have2 KB (243 words) - 11:03, 2 May 2023
- FIXME: confirm [[Project Don't be evil|"Project Don't Be Evil" devkit]] and [[PinePhone v1.0 - Dev|PinePhone v1.0 - Developer batch] ...sink and will happily cool down while you are trying to melt it. It should be possible to use properly sized pliers to cut the pins first, please edit if3 KB (434 words) - 03:13, 16 March 2023
- Both patches go together, and appear to be a performance optimization only. | Fromt camera || in progress || Front camera driver should be upstream in 6.8-rc1, but will need testing and dts parts to activate[https:3 KB (432 words) - 18:29, 20 January 2024
File:Martjin VCONN switches 1.1.jpg Close-up of the VCONN switches that need to be replaced on PinePhone models prior to 1.2a to enable some USB functionality(1,920 × 1,080 (274 KB)) - 15:48, 20 February 2023- The S1 jumper can be set to 5V or 3.3V.307 bytes (43 words) - 21:03, 22 September 2023
- It seems that this wiki can't be configured to send me email notifications, so the best way to contact me is257 bytes (45 words) - 22:31, 22 January 2023
- ...search for partitions, process CRC, handles error codes,...) that will not be complete : there's no way we will write something meaningful in this code, ...assume the data is where we expect it to be and coherent? The result will be the same : if the data is OK, it works, if the data is corrupt... the bootl3 KB (573 words) - 19:25, 30 November 2020
- Issues should '''only''' be reported in the correct '''bug trackers''', not in the community chats. The Issues with the PinePhone and the PinePhone Pro can be reported on the following bug trackers (selection).4 KB (512 words) - 18:26, 2 July 2022
- ...distribution used on a PinePhone, the default settings may differ. It may be advised to lower the settings (i.e. the thermal trip point temperatures) to Current CPU temperature can be displayed using the following command:3 KB (396 words) - 01:50, 16 August 2022
File:Braveheart VBUS 1 to VBUS at pogopin.jpg ! Be careful that in revisions following Braveheart the pogopins usage could cha(1,280 × 960 (238 KB)) - 15:42, 20 February 2023- ...ith the mainboard that is left over when the mainboard is replaced. It can be regarded as spare and/or useless, but it still is a great device to play wi But there are some things that need to be taken care of.2 KB (427 words) - 13:02, 1 November 2020
- Q[cederom]: Hello world, when Star64 will be available for sale and how much would it cost? There is no section for Star220 bytes (40 words) - 11:37, 26 September 2022
- ...partition''' contains irreplaceable data unique to your PineNote and must be backed up. ...ust everything (the large ''userdata'' partition is supposed to be able to be repopulated as empty space by Android)4 KB (438 words) - 23:36, 7 April 2023
- ...following hint regarding the manajaro-arm-installer: "The script can also be run from SD to install an image to the eMMC". ...unning the script to install to the on boar emmc. But it's too long ago to be sure and my PBP is still running fine (maybe some day I'll screw the pooch1 KB (204 words) - 14:47, 7 January 2021
- Hi Elof, thanks for linking the picture. It would be super helpful if you can upload it to the wiki if it is yours, as linking e350 bytes (57 words) - 12:57, 27 January 2022
File:USB C PD shared watts charger.jpg ...et the full 20V 3.25a PD65w on these chargers, then only a single port can be used at a time. Plugging in Pinecil and other things to the other ports wou(469 × 389 (48 KB)) - 01:22, 24 February 2023- ...ess of the storage on every boot? Definitely, the index of partitions must be out of the own OS code in order to keep organized the data on the flash mem ...the partition entries in some storage space and, this partition table, can be considered a little partition too. It is located in a well-know offset addr5 KB (777 words) - 04:17, 30 November 2020
File:PCP-Top-side-screen.jpg ...s U14 with a Hall Effect Sensor. U14 is an empty footprint, the Sensor can be added after purchase by the end-user.(2,359 × 888 (1.69 MB)) - 22:38, 6 March 2023- ...r subsystem which stores weather data on the watch in a timeline which can be queried by apps or watchfaces. It can store many different types of data (s Weather data must be sent to the watch via a companion app. Currently, [https://gitea.elara.ws/E2 KB (269 words) - 23:16, 21 November 2023
- The Motion package can be installed in a variety of Linux flavors. There's a package in the standard ...he media-ctl tool that comes with the v4l-utils package. That will need to be set before the motion service starts. A simple method to ensure that it get2 KB (393 words) - 10:27, 30 March 2023
- * Additional notes regarding Armbian on the Pinedio can be found in the article [[User: RTP/Pinedio: Armbian Notes]]769 bytes (123 words) - 15:36, 5 April 2023
- This stub needs to be expanded.291 bytes (41 words) - 09:47, 1 February 2023
- ...lowing list is an exemplary selection to which projects and developers can be donated to (in alphabetical order): ...which can be supported. Any FOSS development effort is valuable and should be rewarded, please support your favorite developer(s) or project(s) even if n3 KB (446 words) - 21:10, 8 April 2022
- ...cuit allows a user to hot-plug their serial connection at any time, or can be left attached full time. ...rts have been made to write reliable, safe instructions, the author cannot be held liable for the quality of procured components or the assembly job of t3 KB (483 words) - 11:54, 30 March 2023
- For each invocation of <code>make</code>, be sure to pass the options <code>ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu-< ...te, cross compiled for the target system. A more extensive explanation can be found on https://github.com/japaric/rust-cross. This instruction is based o4 KB (511 words) - 21:31, 2 April 2023
- All USB-C Side Board issues can be fixed by replacing the [https://pine64.com/product/pinephone-usb-c-side-boa ...int of connection between the circuit board and the circuit flex. This can be fixed by touching up the solder between the two.1 KB (225 words) - 13:15, 2 April 2023
- ...he eMMC and the SPI. The capacity of the SPI is 128Mbit (16MiB) and it may be used in the boot process. Boot data can be written to the SPI via two methods: either from within PBP or from a second6 KB (1,005 words) - 05:47, 7 November 2023
- ...m in favour of this. My proposal for an upgraded PineTab would pretty much be a completely new PineTab. Besides general tablet use, a Linux tablet could be useful for more than just what general consumer Android tablets do!5 KB (849 words) - 15:41, 27 April 2022
- ...existing guides. Sections below represent a rough outline and will need to be expanded with details and further instructions. ...at least an intermediate level of linux knowledge is probably necessary to be able to do anything at this moment. That said, there are multiple efforts h4 KB (538 words) - 18:35, 20 February 2023
- == Section will be deleted: Warning template == ...tloader on it. This is an important hardware functionality, because it can be used to modify the boot order (see the section [[#Boot order]]) and to stor7 KB (1,134 words) - 20:25, 22 June 2023
- My personal documentations on various¹ Pine64 devices and the like can be found below:592 bytes (75 words) - 23:17, 2 January 2022
- ...e Pro''' is compatible with a wide variety of accessories. A selection can be found here. The official screen protector can be found in the Pine64 store under [https://pine64.com/product/pinephone-tempe5 KB (801 words) - 21:41, 16 October 2023
- ...lass 10 with 8GB or more SD-Card) - backup everything first, the Card will be formatted! # Write Mode must be set to '''Startup'''2 KB (265 words) - 16:22, 20 February 2023
- ** If affordable, a switch IC with 2.5Gbps ports could be interesting * Allow every board to be replaced while the rest are still turned on (hot-swapping)5 KB (818 words) - 19:39, 10 August 2022
- ...eedom) Software products and my blog with miscellaneous esoteric posts can be found at https://www.hamishmb.com/ for anyone who's interested.515 bytes (85 words) - 18:41, 21 November 2022
- *It would be great to add some general hardening to Linux distributions to make mobile d ...hp?tid=11772 It sounds like the better PinePhone, and all I wanted that to be!2 KB (253 words) - 18:50, 20 February 2023
- ...01/debian_builds/releases Mrfixit2001's Debian Minimal Release] (note: can be updated to a more recent Debian using the regular updating tools, except fo The blue LED can be controlled with via the sysfs (''/sys/devices/platform/leds/leds/power/brig6 KB (867 words) - 15:47, 20 February 2023
- * Other display technology could be explored. ...be a target platform for unclipped IBNIZ demoscene programmes, which would be really fun to play around with on one's wrist!5 KB (760 words) - 00:49, 16 March 2023
- There are also a number of mods that can be done adding more functions by adding extra hardware to the pogo pins, and a There are hopefully videos coming doing it the proper way, and so they can be linked here.4 KB (620 words) - 03:14, 16 March 2023
- I am investigating whether this remote can be used with the ROCKPro64 as a simple input device for presentations and such539 bytes (84 words) - 02:09, 24 March 2023
- ...ound the corners and sides. Once the sides and top are released, it should be possible to carefully tilt up and slide the chassis out of the bottom of th ...ts of double sided tape to "secure" it. You might want something stronger. Be sure the wires will reach the battery connector.2 KB (443 words) - 17:27, 11 May 2023
- ...ackers on any device exposed to the public Internet. Exposed devices might be attacked within minutes after being exposed. Typically such attacks try def ...r existing one. You probably do not want to do this, as you will no longer be able to use your existing key pair for authentication.3 KB (442 words) - 16:39, 20 February 2023
- ...ound the corners and sides. Once the sides and top are released, it should be possible to carefully tilt up and slide the chassis out of the bottom of th ...ts of double sided tape to "secure" it. You might want something stronger. Be sure the wires will reach the battery connector.2 KB (452 words) - 18:19, 11 May 2023
- ...below 75°C instead. The memory has no temperature sensor, but will likely be cooled quite a bit as well. ...you'll need to logic level shift the output PWM signal as the 5V fan will be expecting 5V PWM on the PWM pin.3 KB (592 words) - 21:29, 2 April 2023
- ...ransflectivity]]) and so I was wondering whether the PineTime system could be emulated using Qemu. Based on the PineTime specifications and determining t ...ow Qemu and PineTime well enough to complete the above command? This would be really helpful.<BR/>2 KB (253 words) - 12:32, 12 May 2022
- Should that be fixed? And if so, how? --[[User:Diederik|Diederik]] ([[User talk:Diederik|t : Should be fine now at this point. --[[User:Fxc|Fxc]] ([[User talk:Fxc|talk]]) 19:48,1 KB (249 words) - 19:48, 24 February 2023
- ...a single point of reference. 'Software and OS Image Downloads' might also be a place to talk about default distrbutions that shipped with the Pinebook P2 KB (261 words) - 21:40, 6 September 2021
- ...it's not the thermal emergency function failing again, it can also simply be bad apples. I recommend to contact the devs who look into this, such as meg ...ught, you're probably right; the information on screen delamination should be verified further before becoming included into the [[PinePhone]] article.4 KB (655 words) - 16:07, 26 April 2021
- ...that the "Flashing Ox64 SBC and SD Card for Newbies" section title should be reworded? I'd agree about that, and I'd suggest that the "for Newbies" par ...tself I suggested creating a virtual environment as follows. That seems to be the "preferred" way of managing a separate set of Python packages to the on3 KB (524 words) - 03:57, 19 January 2024
- The installation instructions can be found under [[PineTab#Installation instructions]]. * The latest image can be downloaded [https://github.com/dreemurrs-embedded/Pine64-Arch/releases here5 KB (779 words) - 09:58, 9 December 2023
- In the list of available OSes, it would be helpful to have a bit more information on the less well-known ones. Which m ...ftware list on both the hardware and software pages they are guaranteed to be out of sync at best, and contradictory at worst. IMHO --[[User:Dukla2000|Du2 KB (278 words) - 18:37, 20 February 2023
- * bumps for holding angle should be deeper * screw holes for pinephone might be too big?2 KB (275 words) - 15:15, 23 September 2020
- ...nd GNU/Linux. It may be compatible with Apple systems, but this has yet to be documented. ...ing another audio device obviates the need for the audio device default to be restored on reboot, which did not work on xfce4. 9/10.5 KB (755 words) - 17:20, 15 January 2024
- ...ases grow even larger. Other categoration like open source or not may also be applied. A table with <code>class="wikitable sortable"</code> would help fo Perhaps some mention of lower level software that can be updated, such as firmwares and bootloader? I've just encountered the [[Crus2 KB (251 words) - 03:03, 16 March 2023
- |This is likely to be a "lack of grounding" problem. When using Pinepower, you can unplug the fig | Likely a FET failure - the FET can be replaced. by using a hot air station or a soldering iron.3 KB (426 words) - 19:37, 20 February 2023
- It is not supposed to be a comprehensive or neutral review of the machine, but merely an experience ...l and upstream ATF (and whatever other involved party) yet, so it will not be able to resume successfully.6 KB (1,032 words) - 21:26, 31 December 2019
- ...rmware 0.7.1. The firmware linked, pinetime-mcuboot-app-dfu-1.0.0.zip, may be "good," but when trying to follow the steps with Gadgetbridge from my Pixel620 bytes (90 words) - 23:51, 31 July 2021
- This guide will be especially useful if you are looking to overclock the ram on your PinePhone ...with which you can grab the needed package names from, however you should be able to follow these instructions with these packages installed: <code>buil4 KB (693 words) - 21:18, 2 April 2023
- ...are multiple reasons to desire a different file system layout. This could be to allow 2 separate OS partitions for testing an update or new OS altogethe ...w level boot:''' The boot loader U-Boot and ARM64 support information must be installed as specified. These are partitions 2, 3 and 4 in the example belo5 KB (862 words) - 15:17, 23 September 2020
- ...e developers primarily, and should describe how to design your firmware to be interoperable with the rest.958 bytes (125 words) - 19:58, 17 October 2020
- ...tion is generated and organized in a more cohesive way, this may no longer be necessary. Images, diagrams and technical data of the Pinenote's internals to be added4 KB (628 words) - 19:51, 20 February 2023
- * The root filesystem of the distribution of your choice. This can be on the same filesystem as your kernel and device tree if using ''extlinux.c ...inux running on the board, not some vendor provided kernel that will never be receiving updates. A mainline-first approach allows for the boards to conti5 KB (736 words) - 15:10, 26 September 2023
- ...n added which allows the user to customise the sidebar. These settings can be accessed by long pressing on the watchface which will display two buttons, ...al and black, and a cross which closes the settings interface. It can also be closed using the physical button.3 KB (478 words) - 08:11, 20 May 2023
- These instructions can be followed to install Arch Linux ARM on an SD Card, USB Flash Drive, eMMC, or ...s to be run as a normal user are prefixed with <code>$</code>, commands to be run as root (or with <code>sudo</code>) are prefixed with <code>#</code>.5 KB (851 words) - 16:53, 4 April 2023
- * L3 + R3 settings can be found on: Settings -> Input -> Menu Toggle Gamepad Combo * The screenshot image files will be saved in Screenshots folder (/storage/screenshots)3 KB (485 words) - 13:44, 5 February 2023
- ...software''" is now present in 2 places. This isn't good. One of them must be deleted. [[User:Lucho|Lucho]] ([[User talk:Lucho|talk]]) 13:44, 30 August 2 ...else. By the power input I see some unpopulated 3-pin devices that might be the RT9013, but I can't tell without a mask that has labels. Is there any2 KB (294 words) - 14:07, 19 August 2022
- ...both CC1 and CC2 are pulled high. In normal usage, either CC1 or CC2 will be floating since these are the connector rotation pins. When both are detecte ...UARTs to pins on the USB-C connector. In all other cases, the UART should be disconnected. It also requires the PINE64 Store ship a simple one-sided (no5 KB (839 words) - 21:01, 12 January 2023
- A serial console can be established with 1152008N1 (no hardware flow control). Login credentials ar Motion daemon can be enabled using systemctl (With root) <code>systemctl enable motion</code>. S3 KB (509 words) - 10:43, 30 March 2023
- ...o be cleaned up and updated, and OS-specific information and tweaks should be moved elsewhere}} We'll be using smaeul's kernel + some additional patches provided by DorianRudolph,9 KB (1,407 words) - 18:55, 14 April 2023
- * Provide a read-only factory image we'll be able to restore in case of unrecoverable errors during OTA * Boot log is currently not used. Can be use to provide reboot logs to the application9 KB (1,432 words) - 04:17, 30 November 2020
- High contrast style for eink-devices can be found [https://github.com/MichiMolle/gtk3-eink here]. High contrast style for eink-devices can be found [https://github.com/MichiMolle/gtk4-eink here].5 KB (721 words) - 06:12, 30 July 2023
- .... The state of PL6 at boot can be used to distinguish between v1.1 (it can be pulled high) and v1.2 (it will remain low). # PL2 is now connected to the WiFi module's reset pin, allowing the WiFi to be turned off or reset in software.5 KB (926 words) - 23:44, 24 December 2023
- ...can be manually toggled on/off and the keyboard’s battery charge level can be read in the supported operating systems; the keyboard remains functional wi ...erprint sensor, which uses open firmware for it's i2c bridge, and can also be used for gesture navigation thanks to it's ability to detect directional sw6 KB (825 words) - 00:36, 16 March 2023
- ...BBC micro:bit not so realistic in IoT any more. I think new learners would be more comfortable connecting a Raspberry Pi to PineTime, and using open sour : My response... Why reinvent the wheel? Eventually we will be forced to do some multitasking, like any IoT gadget: reading + sending sens3 KB (507 words) - 15:19, 23 September 2020
- ...a lot of experience and thought put into the system already, and it would be good to leverage that for other projects as well, once they are ready to lo As I think it would be sad to leave such valuable info in the backlog of the chat, I would like to9 KB (1,488 words) - 18:34, 4 April 2023
- I was not able to find screws which would be both the right length and the right thread diameter, at least so far. The o804 bytes (134 words) - 00:35, 9 April 2023
