Search results

• ROCKPro64 Device Tree Overlays on Mainline
  ...ed with <code>CONFIG_OF_LIBFDT_OVERLAY</code> (which Manjaro's is), adding device tree overlays the mainline way is very simple and easy. == Writing Your Device Tree Overlay ==
  3 KB (557 words) - 15:00, 29 December 2021
• Switching your PineTime between InfiniTime and Wasp-os
  ...nd many people will want to try both. This is possible, even with a sealed device! ...ke sure the watch is running Infinitime and can be found by your companion device (PC, phone, etc).
  4 KB (654 words) - 14:42, 15 November 2022
• Quartz64 Building U-Boot
  ...cle guides you through compiling U-Boot for a [[Quartz64]] or [[SOQuartz]] device. ...-compiler installed, or an existing aarch64 system. You will also need the device tree compiler dtc, python3 (including setuptools and pyelftools), swig, GNU
  3 KB (426 words) - 11:09, 31 August 2023
• U-Boot
  ...guide will be especially useful if you are looking to overclock the ram on your PinePhone following the information found [[Overclocking#DRAM|here]]. ...nd likely use a different U-Boot source with patches oriented towards your device.}}
  4 KB (693 words) - 21:18, 2 April 2023
• Wifi Remote I2c
  ...the USB/UART Programming/Console Adapter (PMPROG01) to the Wifi Remote I2c Device. ...ows system, you can use terminal emulator program Termite to configure the device.
  8 KB (1,349 words) - 16:54, 20 February 2023
• Quartz64 UEFI with U-Boot
  ...storage devices depending on the device, you'll have to get creative with your installer medium.}} ...to one, e.g. if you start your partitions at 16MiB you can have u-boot and your installed system reside on the same storage medium.
  6 KB (928 words) - 11:39, 5 August 2023
• Quartz64 connecting a MIPI-DSI display
  ...t by modifying the device tree. The easiest way to go about this is to use device tree overlays. ...he overlay-examples directory, substituting ''path/to/linux/include'' with your path of course.
  3 KB (474 words) - 21:58, 2 April 2023
• Quartz64 Installing Arch Linux ARM
  ...to be run as root are prefixed with <code>#</code>. We assume your target device is <tt>/dev/sdX</tt>, adjust accordingly. == Partitioning The Block Device ==
  4 KB (710 words) - 19:02, 20 February 2023
• Pinebook
  ...root, values are in microvolts. The factory value is 4200000 or 4.2V on my device. This charges to 100% capacity. Check the factory value on your device, and record it if it is different. The value depends on the battery install
  13 KB (1,957 words) - 17:15, 27 June 2023
• Quartz64 Model A using a PCF8574
  ...O extender to a [[Quartz64]] Model A single-board computer, including what device tree changes to make and how to control it. ...4A modules will actually push this to a total of 128 GPIO outputs added to your board!
  9 KB (1,418 words) - 21:39, 2 April 2023
• Upgrade PineTime to InfiniTime 1.0.0
  Congratulations on receiving your new PineTime! ...w you're probably wondering exactly how on earth do you go about upgrading your watch to the latest and greatest version of InfiniTime - you know, that ver
  9 KB (1,486 words) - 00:53, 16 March 2023
• POT
  Support Virtual COM Port Device Drivers ==I2C Device: Humidity and Temperature Sensor (PMSDP01)==
  8 KB (1,326 words) - 16:13, 24 April 2023
• ROCKPro64 Getting Started
  ...inux-build/blob/master/recipes/video-playback.md video playback here.] For your ROCKPro64 the install should be ...ge rkmpv myvideo.mp4 will play a fullscreen, hardware assisted, version of your video. rkmpv is at /usr/local/bin/rkmpv
  12 KB (1,905 words) - 07:04, 25 September 2023
• PinePhone Installation Instructions
  ...need a '''microSD card''', a '''microSD card reader''' and a '''compatible device''', such as a computer or a laptop with Linux, iOS, Windows or similar (Not # Download your chosen image from [[PinePhone Software Releases]] for the regular '''PinePh
  12 KB (1,957 words) - 14:50, 12 August 2023
• PineTime Development
  .... The debug peripheral is enabled as soon as you connect a debugger to the device, and '''is not automatically disabled''', even if you disconnect the debugg ....1.pdf the errata sheet of the MCU] and apply workarounds if they apply to your software.
  7 KB (1,024 words) - 05:08, 21 April 2023
• PineTab2 FAQ
  === Putting the Device into Maskrom Mode === ...table USB WIFI adapter]], a wired USB Ethernet adapter, and a tethered iOS device.
  13 KB (2,116 words) - 21:10, 15 December 2023
• RK3399 boot sequence
  # bringing up the OTG0 USB controller in device mode and accepting control transfers to load programs # Probing the boot device
  9 KB (1,425 words) - 05:51, 1 November 2023
• PineTab2
  ...n be started by pressing and holding the power button for two seconds. The device is initialized at the first boot and will power-cycle while the partition t ...so, go to ''system settings'' -> ''users'' and create a new profile using your preferred name and password.
  15 KB (2,304 words) - 11:16, 23 October 2023
• PineNote Development/Building Kernel
  ...learn how to get the features that enable that kind of performance. To get your PN running this smoothly, we'll need to build our own kernel. There are two ...kchip_ebc/patches here], these changes are all experimental and may damage your panel.
  9 KB (1,407 words) - 18:55, 14 April 2023
• Project
  ...er to always login into the Wiki to see the latest updates'''. You can use your PINE64 forum login details. ...sub-sections (on Contributing New Projects and Authorship) before entering your submission.
  26 KB (3,803 words) - 18:31, 20 February 2023

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)