User:RemDogKap/SandBox/Status of Features
< User:RemDogKap | SandBox
Jump to navigation
Jump to search
| Feature | Status | Notes | More info |
|---|---|---|---|
| SD Card Boot | Working | There is a design flaw such that the SD card can only receive 3.3V and not the 1.8V required for speeds over 20 MB/s. | #Star64 |
| eMMC Boot | Working | #Star64 | |
| UART Boot | Not Tested, assumed working | The only current known use for UART boot is the recovery tool from StarFive | |
| PCIE/NVME Boot | Partially Implemented | #Star64 @Tenkawa | |
| USB 2.0 | Working | A design flaw means that USB overcurrent protection is disabled so be careful | |
| USB 3.0 | Working | ||
| 4K Output | Partially Implemented | #Star64 @Fishwaldo | |
| 4K HDR | Not Implemented | ||
| H.264 | Not Implemented | ||
| H.265 | Not Implemented | ||
| 3.5mm audio Jack | Working | ||
| Ethernet | Working | ||
| Wifi | working | ||
| BT | working | #Star64 @Fishwaldo, needs binary blob | |
| PCIe 2.0 ×1 lane | Working | ||
| "Pi2" GPIO | Working | ||
| TTL UART | Working | ||
| MIPI-DSI | Unknown | Display interface | |
| MIPI-CSI | Unknown | Camera interface |