Search results

Unlocking the device and erase the memory. ...the read protection on the memory. Note that it will erase the whole flash memory of the MCU!''' :

== SoC and Memory Specification == Memory Features:

...ead of <code>dd</code>, to make sure all specifics of the underlying flash memory are covered. # Check is there new output from <code>journalctl</code> program.

...64-bit and E907/E902 32-bit CPU cores supported by 64 MB of embedded PSRAM memory, and with built-in WiFi, Bluetooh and Zigbee radio interfaces. The Ox64 com == SoC and Memory Specification ==

Running under strace, we see the program stuck in an ioctl: Our program that asks for a video frame is still hung! We ask the camera to start strea

The Community Edition program (featuring the mainboard numbers 1.2 through 1.2b and branded back covers) ..., the Beta Edition PinePhones have been released and the Community Edition Program has ended.

Memory: ...nboard RGB LED. Nothing about the LED itself interferes with JTAG, but any program that uses the LED will necessarily remap some of the default JTAG pins to b

# eMMC (the internal memory) Flashing to the eMMC (the internal memory of the PinePhone Pro) can either be done using ''Tow-Boot'''s USB Mass Stor

.../Build,-program-and-debug-NRF52-project-with-JLink,-CMake-and-CLion Build, program and debug NRF52 project with JLink, CMake and CLion] * IDs for XT25F32B are: manufacturer (0x0b), device (0x15), memory type (0x40), density (0x16)

...nstead of the offical [https://github.com/facebook/zstd zstd] command line program, you may use [https://github.com/mcmilk/7-Zip-zstd 7-zip-zstd]. Different i Minimal in-memory cross-compiled OS optimized for hosting multiple in parallel Docker contain

The Pinebook Pro is equipped with 4&nbsp;GB of LPDDR4 system memory, up to 128&nbsp;GB of eMMC flash storage, and 128&nbsp;Mbit of SPI boot fla (Press the PINE64 logo key plus F10/F11/F12) for 3 seconds)

The instructions to install an operating system to the internal memory ("eMMC") or a microSD card can be found here: [[PinePhone Installation Inst ...t interface (''/dev/ttyUSB1'') to feed NMEA data into gpsmon or some other program that can parse standard NMEA sentences.