Difference between revisions of "Pinecil Cases, Stands, Supplies"

From PINE64
Jump to navigation Jump to search
m
Tag: Manual revert
m
Line 1: Line 1:
The article contains information about cases, stands, 3D-models and supplies for the [[Pinecil]] soldering iron.
The article contains information about cases, holders/stands, 3D-models, and supplies for the [[Pinecil]] soldering iron.


=== Cases and bags ===
=== Cases and bags ===

Revision as of 23:45, 16 February 2023

The article contains information about cases, holders/stands, 3D-models, and supplies for the Pinecil soldering iron.

Cases and bags

Holders and stands

3D models

Soldering supplies

  • Brass w/Rosin - Brass Wool with hard rosin in the bottom for tip cleaning. Twirl the tip in the brass wool often during soldering to keep the tip clean. Lower the temperature and dip lower into the hard rosin when you need a deeper cleaning.
  • Tip Refresher/tinner: Mechanic MCN-20 lead-solder version, or the Lead-free version (use when the tip is very dirty and solder is not sticking to it).
  • ESD Tweezers with case, budget set.
  • Weller Lead-Free Solder, 3 pack: variety of sizes for portable kits & sampling three common useful sizes (0.3/0.5/0.8mm).
  • NC-559-V3 from amtechdirect: Amtech flux comes in a paste or convenient syringe). Be careful, there is a lot of fake Amtech online. Amtech is made in the USA. Avoid flux from Aliexpress, many reports of flux that simply does not work and appears to be fake mixtures.
  • Solder Wick, variety pack: helps remove solder. Works best to first add a lot of flux to the area and solder wick for the best removal of solder.

Go back to Pinecil article

Go back to Pinecil article.