PinePhone Hardware Accessory Compatibility
Revision as of 01:26, 3 November 2020 by E1337 (talk | contribs) (Just clearing the table because it's imperfect won't improve it, so I restored the table. I added a hw column to encourage people to fill it. I cleaned up type + model columns so people fill it in properly. Hopefully this will actually improve things in the future)
List of devices that have been tried on the PinePhone, and the results.
Protection
Screen protector
The official screen protector can be found in the Pine64 store under PinePhone Tempered Glass Screen Protector.
Most screen protectors for the iPhone 11 Pro Max and the iPhone XS Max fit the PinePhone (if the top notch is not obscured by a black foil or similar).
Case
The Pine store got official cases:
- PinePhone Hard Protective Case
- PinePhone Soft TPU Protective Case - "Reduce Digital Gap" Donation Program
Tight-fit cases of other phones can't be alienated for the PinePhone due as most times the proportions and/or camera notch won't fit. The phone can however also be used with "phone sleeves", such as those from fitBAG. The sleeve from fitBAG for the Xiaomi Redmi Note 8 Pro is fitting the PinePhone very tightly.
Peripheral equipment
| Type | Make/Model | Connected via |
Hardware IDs | Result | Tested OS | Tested PinePhone HW (1.2, 1.2a, ...) | Notes |
|---|---|---|---|---|---|---|---|
| USB-C Hub | AliExpress 5-1 USB-C Hub | USB-C | 05e3:0626 hub | PD not working, rest not working yet |
UBPorts/pmOS | Unknown | HDMI, GBit eth, 2xUSB-3, USB-C PD image |
| Bluetooth Keyboard | Unknown(? maybe this entry should be removed) | Bluetooth | -- | No pairing via ui, but functional via terminal | pmOS | Unknown | Instructions |
| USB-C Hub | UMAX U-Connect Type-C Multiport H7 | USB-C | - | USB-A ports, PD, HDMI works, SD card reader not enumerating on PP with removed VCONN switches (may need VCONN) | Arch Linux | Unknown | HDMI, 3xUSB-3, USB-C PD, SD reader |
| USB-C Soundcard | Google Pixel USB-C to 3.5mm adapter | USB-C | 18d1:5029 | Works, recognized as usb soundcard, but only if a cable is plugged in | pmOS | Unknown | |
| USB-C Hub | Anker PowerExpand+ 7-in-1 USB-C PD Ethernet Hub | USB-C | -- | USB Ports and HDMI Port work, can charge while using this device (needs VCONN HW mod) | Mobian | Unknown | HDMI, USB3, Ethernet, PD-USBC, SD Card, Micro SD Card |
| USB-C Hub | Dell WD-15 Docking station | USB-C | 0424:2807 | USB Ports and charging works. Audio sinks and DP status changes are detected (needs VCONN HW mod and ANX firmware) | pmOS | Unknown | HDMI, VGA and DP might work after a kernel update. ANX firmware is needed for charging after VCONN mod. |
| USB-C Hub | Microsoft HD-500 Dock | USB-C | -- | USB Hub, Display Out, and Power Delivery all works. (needs VCONN HW mod and ANX firmware) | Mobian | Unknown | |
| USB-C Hub | HP Elite x3 LapDock | USB-C | -- | Dock display, keyboard/trackpad, and Power Delivery all works. (needs VCONN HW mod and ANX firmware) | Mobian | Unknown | Haven't tested micro-HDMI port or the internal USB-C hub. |
| USB-C Hub | Plexgear 7-port multi adapter with PD and SD-card reader | USB-C | USB-hub: 0bda:5411 (RTS5411); Ethernet: 0bda:8153 (RTL8153); SD-card reader: 05e3:0749; Audio: 0c76:161f; 2109:0102; 0c76:161f | Everything seems to work. PD, 3x USB 2.0 ports, ethernet, HDMI, SD-card, audio. | Arch Linux | 1.2 with VCONN mod (CC switches removed) |
