Difference between revisions of "PinePhone Hardware Accessory Compatibility"
Jump to navigation
Jump to search
(→Screen protector: text) |
(order) |
||
| Line 1: | Line 1: | ||
List of devices that have been tried on the PinePhone, and the results. | List of devices that have been tried on the PinePhone, and the results. | ||
== Protection == | |||
=== Screen protector === | |||
The official screen protector can be found in the Pine64 store under [https://store.pine64.org/product/pinephone-tempered-glass-screen-protector/ PinePhone Tempered Glass Screen Protector]. | |||
Most screen protectors for the iPhone 11 Pro Max and the iPhone XS Max fit the PinePhone (if the top notch is not obscured by a black foil or similar). | |||
=== Case === | |||
The Pine store got official cases: | |||
* [https://store.pine64.org/?product=pinephone-hard-protective-case PinePhone Hard Protective Case] | |||
* [https://store.pine64.org/?product=pinephone-soft-tpu-protective-case-reduce-digital-gap-donation-program PinePhone Soft TPU Protective Case - "Reduce Digital Gap" Donation Program] | |||
Tight-fit cases of other phones can't be alienated for the PinePhone due as most times the proportions and/or camera notch won't fit. The phone can however also be used with "phone sleeves", such as those from fitBAG. The sleeve from fitBAG for the Xiaomi Redmi Note 8 Pro is fitting the PinePhone very tightly. | |||
== Peripheral equipment == | == Peripheral equipment == | ||
| Line 27: | Line 45: | ||
|- | |- | ||
|} | |} | ||
[[Category:PinePhone]] | [[Category:PinePhone]] | ||
Revision as of 15:34, 23 September 2020
List of devices that have been tried on the PinePhone, and the results.
Protection
Screen protector
The official screen protector can be found in the Pine64 store under PinePhone Tempered Glass Screen Protector.
Most screen protectors for the iPhone 11 Pro Max and the iPhone XS Max fit the PinePhone (if the top notch is not obscured by a black foil or similar).
Case
The Pine store got official cases:
- PinePhone Hard Protective Case
- PinePhone Soft TPU Protective Case - "Reduce Digital Gap" Donation Program
Tight-fit cases of other phones can't be alienated for the PinePhone due as most times the proportions and/or camera notch won't fit. The phone can however also be used with "phone sleeves", such as those from fitBAG. The sleeve from fitBAG for the Xiaomi Redmi Note 8 Pro is fitting the PinePhone very tightly.
Peripheral equipment
| Type | Make/Model | Connected via |
Hardware IDs | Result | Tested OS | Notes |
|---|---|---|---|---|---|---|
| 5-1 USB-C hub | from aliexpress | USBC | 05e3:0626 hub | PD not working, rest not working yet |
UBPorts/pmOS | HDMI, GBit eth, 2xUSB-3, USB-C PD image |
| Generic Bluetooth keyboard | generic | BT | -- | No pairing via ui, but functional via terminal | pmOS | Instructions |
| UMAX U-Connect Type-C Multiport H7 | ts-bohemia | USBC | - | USB-A ports, PD, HDMI works, SD card reader not enumerating on PP with removed VCONN switches (may need VCONN) | Arch Linux | HDMI, 3xUSB-3, USB-C PD, SD reader |
| Google Pixel USB-C to 3.5mm adapter | USBC | 18d1:5029 | Works, recognized as usb soundcard, but only if a cable is plugged in | pmOS | ||
| Anker PowerExpand+ 7-in-1 USB-C PD Ethernet Hub | Anker | USBC | -- | USB Ports and HDMI Port work, can charge while using this device (needs VCONN HW mod) | Mobian | HDMI, USB3, Ethernet, PD-USBC, SD Card, Micro SD Card |
| Dell WD-15 Docking station | Dell | USB-C | 0424:2807 | USB Ports and charging works. Audio sinks and DP status changes are detected (needs VCONN HW mod and ANX firmware) | pmOS | HDMI, VGA and DP might work after a kernel update. ANX firmware is needed for charging after VCONN mod. |
| Microsoft HD-500 Dock | Microsoft Docs | USB-C | -- | USB Hub, Display Out, and Power Delivery all works. (needs VCONN HW mod and ANX firmware) | Mobian | |
| HP Elite x3 LapDock | HP Product Info | USB-C | -- | Dock display, keyboard/trackpad, and Power Delivery all works. (needs VCONN HW mod and ANX firmware) | Mobian | Haven't tested micro-HDMI port or the internal USB-C hub. |
| Plexgear 7-port multi adapter with PD and SD-card reader | from Kjell & Company | USB-C | USB-hub: 0bda:5411 (RTS5411); Ethernet: 0bda:8153 (RTL8153); SD-card reader: 05e3:0749; Audio: 0c76:161f; 2109:0102; 0c76:161f | Everything seems to work. PD, 3x USB 2.0 ports, ethernet, HDMI, SD-card, audio. | archlinux with megi's kernel | pinephone 1.2 with VCONN mod (CC switches removed) |
