Difference between revisions of "User:Silver/3d printed a folding keyboard mostly"
Jump to navigation
Jump to search
(Created page with "=Current status= You cannot type on this yet. =Stuff= rev9aback.stl is a model that should screw nicely to the back of a pinephone and replaces it's stock frame. the rev10 f...") |
|||
| Line 6: | Line 6: | ||
the rev10 files include a folding mechanism with a cable passage. Currently looking for feedback for problems on this one before I do rev 11. | the rev10 files include a folding mechanism with a cable passage. Currently looking for feedback for problems on this one before I do rev 11. | ||
https://www.youmagine.com/designs/pinephone-folding-keyboard-mockup | |||
https://ibb.co/album/ScDttH | |||
=Development updates= | =Development updates= | ||
===rev 10 problems=== | |||
Looking for confirmation and suggestions on solutions for these issues with rev 10 that I would like to fix in 11 | |||
* Base layer too thin on lid: fixed | |||
Base layer too thin on lid: fixed | |||
Base layer too thick on phone side: fixed | * Base layer too thick on phone side: fixed | ||
doesn't have a reset button hole | * doesn't have a reset button hole | ||
lid is flimsy, could use a thicker wall | * lid is flimsy, could use a thicker wall | ||
still need side buttons worked out | * still need side buttons worked out | ||
hinge gaps are all wrong | * hinge gaps are all wrong | ||
hinge should rest on a hingepin not on the cable passage cup faces | * hinge should rest on a hingepin not on the cable passage cup faces | ||
maybe include a washer or two in the hinge | * maybe include a washer or two in the hinge | ||
camera hole is really ugly | * camera hole is really ugly | ||
headphone jack is weak | * headphone jack is weak | ||
charger hole is ugly | * charger hole is ugly | ||
need to decide on an actual size if using nuts and bolts | * need to decide on an actual size if using nuts and bolts | ||
bumps for holding angle should be deeper | * bumps for holding angle should be deeper | ||
screw holes for pinephone might be too big? | * screw holes for pinephone might be too big? | ||
lid screwholes are not very useful. Maybe posts? | * lid screwholes are not very useful. Maybe posts? | ||
Revision as of 02:25, 11 August 2020
Current status
You cannot type on this yet.
Stuff
rev9aback.stl is a model that should screw nicely to the back of a pinephone and replaces it's stock frame.
the rev10 files include a folding mechanism with a cable passage. Currently looking for feedback for problems on this one before I do rev 11.
https://www.youmagine.com/designs/pinephone-folding-keyboard-mockup
Development updates
rev 10 problems
Looking for confirmation and suggestions on solutions for these issues with rev 10 that I would like to fix in 11
- Base layer too thin on lid: fixed
- Base layer too thick on phone side: fixed
- doesn't have a reset button hole
- lid is flimsy, could use a thicker wall
- still need side buttons worked out
- hinge gaps are all wrong
- hinge should rest on a hingepin not on the cable passage cup faces
- maybe include a washer or two in the hinge
- camera hole is really ugly
- headphone jack is weak
- charger hole is ugly
- need to decide on an actual size if using nuts and bolts
- bumps for holding angle should be deeper
- screw holes for pinephone might be too big?
- lid screwholes are not very useful. Maybe posts?