Main Page

What You’ll Need to Get Started

You will need the following to get started with using your Pine A64 or A64+ board:

• Windows / Linux PC or MAC with a SD Card Reader connected to the Internet
• Power Supply (PSU) and a micro usb cable. Please make sure to use a PSU rated at +5V @2A and a micro USB cable that is at least 26 AWG thick.
• MicroSD card (8GB or higher capacity) rated 'class 10' or better.
• HDMI cable (unless you wish to run headless / without a monitor). N.B. Android and Remix OS support 720p and 1080p, while Linux supports a wider range of resolutions.
• Input device(s) such as: keyboard, mouse, remote, pointer, etc.

Simple Step to Image Your MicroSD

Please try our PINE64 Installer to easily select the PINE A64(+), SOPINE and Pinebook OS of your choice and flash it to your MicroSD Card.

For more advance steps, you can further read instructions below.

Step by Step Instructions

Caution!

Please handle the Pine A64 or A64+ with care. Always hold the board by the edges and make sure to wear an anti-static wrist strap when handling the Pine A64 (+). Touching components on the front and back of the board can result in an ESD discharge that may damage your board. Avoid placing the board on materials such as carpets, plastics or other surfaces prone to electrostatic build-up.

Begin by imaging the OS of your choice

You will require a quality microSD card (8GB or greater; class 10 or faster). There are many substandard and counterfeit cards in circulation and even reputable vendors may unknowingly sell counterfeit microSD cards. Cards that do not meet the criteria outlined above are known to cause a variety of issues including, but not limited to, complete boot failure. There are ways of testing microSD cards prior to installing the operating system to make sure they are appropriate for use with your board. The main utility for checking microSD cards is H2testw 1.4; yet another alternative is F3.

Please refer to the relevant section below for instructions on how to image your microSD card:

• Imaging microSD on Windows 7/8/8.1/10
• Imaging microSD on Apple OSX
• Imaging microSD on Linux

Having successfully imaged your microSD card, insert it into the microSD slot located at the bottom left of the board / to the left of the USB 2.0 sockets.

Plug in the HDMI Cable, Ethernet Cable and Peripherals

Unless you are planning on running your Pine A64 (+) headless (without a monitor / as a server), you should plug in all necessary peripherals, including the HDMI and Ethernet cable, prior to powering ON the board. Do note, depending on which OS image you are using, some peripherals may or may not work. N.B. Some HDMI→DVI/VGA converters may not work in conjunction with your monitor or TV.

Apply Power to Your Board

Once you have imaged your microSD and plugged everything in, you are ready to apply power to the Pine A64(+) board. You'll need a good quality 5 Volt, 2 Amp PSU. Using a good quality PSU and micro USB cable is very important as failing to meet the required specifications may prevent the board from booting correctly. A marginally higher PSU Voltage is acceptable (for instance, 5.1 volts - due to the nature of the micro usb connection, a 5.1v supply can help protect slightly against voltage drops which can cause undesirable results). However, a significantly higher voltage of 7 Volts or more will damage the Pine A64(+) board and may render it inoperative.

If you are using a separate micro USB cable with your PSU, make sure that the cable has a low resistance rating. Cables with high resistance will cause improper function and the unit may not boot at all or only partially. The thicker the internal cabling, the better i.e. AWG (American Wire Gauge) 20 is better than AWG 28. In General, power-only microUSB cables come with red colour USB header.

Having completed the steps outlined above the Pine A64(+) board will begin to boot. The red onboard LED light indicates power on status. The LED will not blink during boot up and the colour of the LED stays solid. The colour does not change to signify an error.

Imaging microSD on Windows 7/8/8.1/10

You will need the following utilities to get started with imaging the OS of your choice onto your microSD card:

• A compression Utility (used to unarchive the OS image). We recommend you use 7zip.
• A disk image utility (used to ‘burn’ the .img to your SD card). We recommend you use either the Win32Imager or Etcher utility.

Optional

• Phoenix Card image utility (used ONLY for phoenix card images). You can download it from here.

Downloading and extracting OS image(s)

You can find all curated OS images under Curated Pine A64 (A64+) OS Images. There are two type of Android and Remix images available. Images designated ‘DD’ need to be imaged using Etcher or Win32imager, whilst images labelled ‘Phoenix Card Image’ require the Phoenix Card utility.

Having downloaded the required OS image proceed to use 7zip to unarchive it by right-clicking the archive, and selecting ‘Extract All’. Upon completion, note the destination of where the .img file was extracted (‘Downloads’ folder by default). Once the process has completed, you can proceed to imaging the .img file.

Imaging the microSD card (DD)

• Insert your microSD card into your laptop/USB card reader. You may require a SD → microSD converter, as most laptops and desktops only feature a full-size SD card reader. Once the microSD card is plugged into your computer, make sure to take note of the drive it has been assigned (the drive is assigned a letter, e.g. ‘F:’). You will need to remember the ‘letter’ it has been assigned when imaging the OS.

• Launch Win32diskImager.exe or etcher.exe. You will be presented with a field titled ‘path’ and a drop down menu labeled ‘device’. Click the ‘path’, navigate to and select the OS image you extracted from the archive earlier. Next, from the drop-down menu select the drive your microSD has been assigned. N.B. Pay close attention to the selected drive (remember your letter) – the imaging process will format the selected drive. If you choose the wrong drive all your data will be lost.

• Having chosen the desired OS image and the correct driver press ‘write’. Once the image has been written to your microSD card you will receive a pop-up notification. Be sure to close the application and to eject/remove your SD card safely from Windows.

Imaging using Phoenix Card

On Windows, you can also use Phoenix Card (for detailed instructions click here). The Phoenix Card utility works ONLY with images designated as ‘Phoenix Card’ in the downloads section. To use Phoenix Card follow these steps:

• Insert your microSD card into your laptop/USB card reader. You may require a SD → microSD converter, as most laptops and desktops only feature a full-size SD card reader. Once the microSD card is plugged into your computer, make sure to take note of the drive it has been assigned (the drive is assigned a letter, e.g. ‘F:’). You will need to remember the ‘letter’ it has been assigned when imaging the OS.

• Launch phoenixcard.exe. You will be presented with a ‘disk’ drop-down menu and a field denoted as ‘Img File’. Click on ‘Img File’ and navigate to and select the OS image have downloaded and unarchived. Next, make sure to select the disk that your microSD card has been assigned. N.B. Pay close attention to the selected drive (remember your letter) – the imaging process will format the selected drive. If you choose the wrong drive all your data will be lost.

• Make sure to select ‘Startup!’ from the ‘Write mode’ window and click Burn. Once the image has been written to your microSD card you will receive a confirmation in the ‘option’ window. Be sure to close the application and to eject/remove your SD card safely from Windows.

---

Imaging microSD on Apple OSX

You will need the following utilities to get started with imaging the OS of your choice onto your microSD card:

• A compression Utility (used to unarchive the OS image). We recommend you use 7Zip.
• A disk image utility (used to ‘burn’ the .img to your SD card in GUI). We recommend you use ApplePi Baker or Etcher.

N.B. Phoenix Card utility and images are NOT available on Apple OSX.

Downloading and extracting OS image(s)

You can find all curated OS images under Curated Pine A64 (A64+) OS Images. On OSX you can only use images designated as ‘DD’.

Having downloaded the required OS image proceed to use 7zip to unarchive it by double clicking the archive, and selecting ‘Extract All’. Upon completion, note the destination where the .img file was extracted (‘Downloads’ folder by default). Once the process has completed, you can proceed to imaging the .img file.

Imaging the microSD card (GUI)

• Insert your microSD card into your Mac laptop/USB card reader. You may require a SD → microSD converter, as Apple’s laptops and desktops only feature a full-size SD card reader. Once the microSD card is plugged into your computer it should appear in Finder / on your desktop.

• Launch Apple-Pi Baker or the etcher utility. Upon startup the application it will ask for your password. When the application launches you will be presented with a field titled ‘IMG file’ and a path of the mounted microSD card (it will look something like this: ‘/dev/diskX 32.0Gb SD card’). Click the ‘IMG file’ button, navigate to and select the OS image you extracted from the archive earlier. Next, select the microSD from the window. N.B. Pay close attention to the selected drive – the imaging process will format the selected drive. If you choose the wrong drive all your data will be lost.

• Having chosen the desired OS image and the correct driver press ‘Restore Backup’. Once the image has been written to your microSD card you will receive a pop-up notification. Be sure to close the application and to eject/remove your SD card safely from your Mac.

Imaging from Terminal

N.B. If you are not comfortable using the terminal, please use the GUI method outlined above instead.

• Insert your microSD card into your Mac laptop/USB card reader. You may require a SD → microSD converter, as Apple’s laptops and desktops only feature a full-size SD card reader. Once the microSD card is plugged into your computer it should appear in Finder / on your desktop.

• Open up your terminal and navigate to the directory where you unarchived your OS image.

• Before you start writing to the card, you will have to identify your microSD card. Type: diskutil list and note the output. The disk number should match the size of your SD card and will likely be using ‘Fdisk_partition_scheme’. Having identified the disk number execute the following commands (substitute diskX for your disk and name of image for pine64-image-name.img):

diskutil unmountDisk /dev/diskX sudo dd if=pine64-image-name.img of=/dev/disk2 bs=1M

• Wait patiently for the process to complete. Be sure to eject/remove your SD card safely from your Mac.

---

Imaging microSD on Linux

You will need the following utilities to get started with imaging the OS of your choice onto your microSD card:

• A compression Utility (used to unarchive the OS image). We recommend you use 7Zip.
• A disk image utility (used to ‘burn’ the .img to your SD card in GUI). We recommend you use Etcher or the GUI Disks utility that ships with most popular distros.

N.B. Phoenix Card utility and images are NOT available on Linux.

Downloading and extracting OS image(s)

You can find all curated OS images under Curated Pine A64 (A64+) OS Images. On Linux you can only use images designated as ‘DD’.

Having downloaded the required OS image proceed to use 7zip to unarchive it by double clicking the archive, and selecting ‘Extract All’. Upon completion, note the destination where the .img file was extracted (‘Downloads’ folder by default). Once the process has completed, you can proceed to imaging the .img file.

Imaging the microSD card (GUI)

• Insert your microSD card into your Linux laptop/USB card reader. Once the microSD card is plugged into your computer it should appear in your File Manager / on your desktop.

• Launch Disks or the etcher utility (This tutorial outlines how to use Disks, if you wish to learn how to use Etcher please visit their website).

• Upon launching Disks, you will be presented with all volumes visible to your computer. As a rule of thumb, your microSD card should be found at the bottom of listed volumes. Verify this by checking the size and mounting of the microSD card. N.B. Pay close attention to the selected drive – the imaging process will format the selected drive. If you choose the wrong drive all your data will be lost.

• Having selected your microSD card, click the cog menu in top right corner and choose the ‘Restore Disk Image’ option from the drop-down list. Navigate to and select the OS image you extracted from the archive earlier. Once you select it, you will be asked to enter your password and to confirm writing to the chosen volume (microSD card).

• You will be given a predicted time, writing-speed and completion percentage. Once the image has been written to your microSD card you will receive a pop-up notification. Be sure to close the application and to eject/remove your SD card safely from your computer.

Imaging from Terminal

N.B. If you are not comfortable using the terminal, please use the GUI method outlined above instead.

• Insert your microSD card into your Linux laptop/USB card reader. Once the microSD card is plugged into your computer it should appear in Finder / on your desktop.
• Open up your terminal and navigate to the directory where you unarchived your OS image.
• Before you start writing to the card, you will have to identify your microSD card.
• Type: lsblk and pay attention to the listed disks. Disks will appear as /dev/sda /dev/sdb etc. Look at the drive that matches your microSD card’s size.
• Having located the microSD card use the following command to burn the .img of choice to the microSD card (/dev/sdb used as example): ‘’sudo unmount /dev/sdb1
• Now you are ready to write the image to the microSD card using this command: ‘’sudo dd if=pine64_image_name.img of=/dev/sdb bs=1M
• Wait patiently for the process to complete. Be sure to eject/remove your SD card safely from your computer.

Troubleshooting

There is a number of things that can prevent the Pine A64(+) board from booting up properly. The most common culprits of a failed boot are (to find out more click here):

• Subpar or counterfeit microSD card
• Subpar Power Supply
• High resistance (thin) or a very long microUSB cable
• Failed imaging of the microSD card (refer to the respective ‘imaging microSD card section)

Make sure to have the newest version of the OS image your are running. On Linux, you can update the kernel and uboot using scripts located in the following directory: /usr/local/sbin

• To navigate to the directory type (in terminal): cd /usr/local/sbin
• You list all the available scripts by typing (in terminal): ls
• To run the script required update script run the following command: sudo ./update_script.sh (substitute the relevant update script for update_script)

Supported Screen Resolutions

The pine supports a number of video resolutions under Linux, however RemixOS and Android images currently only support 720p and 1080p. Linux supports a wider range of resolutions (see all resolutions supported on Linux here). If the native resolution of your monitor or TV is not compatible with the Pine A64(+) then you will be unable to get a video to work with your screen.

Troubleshooting Step by Step

Follow these steps to determine the cause of your problem:

• Check your PSU and microUSB cable ratings
• Download and image a base image of Linux
• Plug in Power and Ethernet into your Board
• Watch Ethernet port LED activity
• Check your router for Pine A64(+) IP
• Attempt to ssh into the Pine A64(+) from your computer

If your PSU and microUSB meet the criteria, and you have correctly followed the instructions to image your card and power on the board, but you are not seeing any LED activity and cannot ssh into your Pine A64(+) then either the imaging process failed (possibly due to a subpar microSD) OR the PSU / microUSB cable is/are faulty.

If your PSU and microUSB meet the criteria, and you have correctly imaged the OS to your card and power on the board and your can ssh into your Pine A64(+) but get no video feed, then it's likely that the native resolution of your monitor/TV is not supported.

If neither of the above mentioned scenarios fits the problem you are facing, please consult this thread (thanks to Ghost for compiling the list): http://forum.pine64.org/showthread.php?tid=680

If you cannot find a solution to your problem you can submit a ticket at: https://support.pine64.org/

Curated Sopine OS Images

Ubuntu

• Ubuntu Desktop Image [20170306] built by Pine64

• • This is a build including DE based on longsleep works and may not have all the up-to-date features offered by longsleep and Sunxi community. For latest build, you can create one and following this thread
  • This build optimizes Gigabit Ethernet parameter and improves on GbE connectivity.
  • Included Mate Desktop, Firebox Browser, and LibreOffice Suite.
  • Included libvdpau-sunxi with SMPlayer
  • Included with Wifi and Bluetooth
  • Included library set that provides access to the GPIO headers in Linux as provided by community member KB3VGW (https://devhub.io/repos/kb3vgw-wiringPi-Pine64)
  • Not yet optimize for Graphic acceleration
  • Suitable for Sopine Board only
• Login with
  • username: ubuntu
  • password: ubuntu
• Auto execute resize_rootfs.sh script on first boot-up to resize the root partition in order to fully utilize the SD Card
• DD image (for 8GB micoSD card and above):
  • • Direct download from pine64.org (US)
    • Direct download from pine64.uk (UK)
    • MD5 (Zip file): 67E3CBF695AB4196C00F205AEB0F3623
    • File Size: 2.09GB

Android

• Android 6.0.1 Image [20170331]
• DD image (for 8GB microSD Card)
  • • Direct download from pine64.org (US)
    • Direct download from pine64.uk (UK)
    • MD5 (Zip file): 4936361E31EDC1E4BA44FBAC08C1619F
    • File Size: 951MB
• DD image (for 16GB microSD Card)
  • • Direct download from pine64.org (US)
    • Direct download from pine64.uk (UK)
    • MD5 (Zip file): BF27C58001C1CEA02CECA9082BD8BC41
    • File Size: 936MB

• DD image (for microSD Card to eMMC)
  • • Burn this image to a 8GB microSD Card, insert into SOPINE and it will start program to eMMC. The power LED will be turn off when the process is completed. Unplug the MicroSD card from SOPINE to boot from eMMC.
    • Direct download from pine64.org (US)
    • Direct download from pine64.uk (UK)
    • MD5 (Zip file): 99736D857E675254D4C3ACA95024B3F3
    • File Size: 673MB

• Android 5.1.1 Image [20160630]
• DD image (for 8GB microSD Card)
  • • Direct download from pine64.org (US)
    • Direct download from pine64.uk (UK)
    • MD5 (Zip file): D5A5CE806D6E65F6F841E9E1711A6B77
    • File Size: 681MB

openSUSE Base Image [20170328]

• Thanks to Terra854 for contributing the openSUSE build based on longsleep's kernel.
• You can visit the project's website here
• DD image (for 8GB micoSD card and above)
• Direct download from pine64.org (US)
• Direct download from pine64.uk (UK)
  • File Size: 174MB
• Login with
  • Username: pine64
  • Password: pine64linux
  • Root password: pine64root
• To find out more about openSUSE on the Pine64 please visit the Pine64 forum thread

The image includes a config tool which, among other options, allows users to install a desktop environment: sudo /usr/local/sbin/pine64-config.sh

Curated Pine A64 (A64+) OS Images

Debian Jessie

• Debian Jessie Linux by Lenny Raposo (Longsleep kernel 3.10.102 BSP 2)

• • DD image (for 8GB and above SD Card):
    • Lenny's Debian Support thread on Pine64 forum
    • Link to all available Debian versions
    • File Size: 1.1GB
  • Up to date on longsleep uboot, kernel and fixes
  • Suitable for 512MB/1GB/2GB PineA64 Board
  • Login with
    • username: debian
    • password: debian
  • Execute resize_rootfs.sh script to resize the root partition in order to fully utilize the SD Card

Ubuntu 16.04

• Ubuntu Linux Image by Longsleep (3.10.xxx)

• • Thanks to longsleep's work, the Linux build progress rapidly. For latest build please see this thread
  • Suitable for 1GB/2GB Pine A64+ Board, not suitable for 512MB Pine A64 Board due to system memory constrain
  • DD image (for 8GB and above SD Card):
    • Latest Ubuntu image by Longsleep
    • File Size: 171MB
  • To install Mate desktop run: sudo /usr/local/sbin/install_mate_desktop.sh
  • Login with
    • username: ubuntu
    • password: ubuntu
  • Execute resize_rootfs.sh script to resize the root partition in order to fully utilize the SD Card

Android 6.0

• Android 6.0 Image (HDMI Video Output) Release 20170112 [ver 2.0.1]

• • The Android build is suitable for 1GB/2GB Pine A64+ Board but not advised to run on a 512MB Pine A64 Board due to system memory constraints.
  • Set default HDMI output to 720P, video setting supports both 720P and 1080P
  • This build optimizes Gigabit Ethernet parameter and improves on GbE connectivity
  • Update GMS software package to 5.1r4
  • Set UVC USB camera as front camera and 5M Pixel camera module as real camera

• • DD image (for 8GB microSD Card):
    • Direct download from pine64.org (US)
    • Direct download from pine64.uk (UK)
    • Torrent Download
    • MD5 (Zip file): 10FE76153EA1BAC8CB5E32D861728378
    • File Size: 707MB

• • DD image (for 16GB microSD Card):
    • Direct download from pine64.org (US)
    • Direct download from pine64.uk (UK)
    • Torrent Download
    • MD5 (Zip file): 89F58F3E73D49C8C0457680EFB6964B3
    • File Size: 773MB

• • DD image (for 32GB microSD Card):
    • Direct download from pine64.org (US)
    • Direct download from pine64.uk (UK)
    • Torrent Download
    • MD5 (Zip file): 9656755D826164FA32FF95CF3B7D5B3A
    • File Size: 796MB

• • DD image (for 64GB microSD Card):
    • Direct download from pine64.org (US)
    • Direct download from pine64.uk (UK)
    • Torrent Download
    • MD5 (Zip file): C89596F8B5A265BFEE567F8EC899697E
    • File Size: 755MB

• Android 6.0.1 Image (LCD and HDMI Video Output) Release 20170209 [ver 2.0.1]

• • The Android build is suitable for 1GB/2GB Pine A64+ Board but not advised to run on a 512MB Pine A64 Board due to system memory constraints.
  • Support dual display (LCD + HDMI output) output.
  • Set default HDMI output to 720P, video setting supports both 720P and 1080P
  • LCD resolution is 1024 x 600, HDMI resolution is 1024 x 600 scale up to either 1280 x 720 pr 1920 x 1080
  • Update GMS software package to 5.1r4
  • Set UVC USB camera as front camera and 5M Pixel camera module as real camera

• • DD image (for 8GB microSD Card):
    • Direct download from pine64.org (US)
    • Direct download from pine64.uk (UK)
    • Torrent Download
    • MD5 (Zip file): 61E969F159C6B11D0632C6633C6A5583
    • File Size: 761MB

• • DD image (for 16GB microSD Card):
    • Direct download from pine64.org (US)
    • Direct download from pine64.uk (UK)
    • Torrent Download
    • MD5 (Zip file): 0D83B4E698FEE88BAFF17606F4FB66C8
    • File Size: 777MB

• • DD image (for 32GB microSD Card):
    • Direct download from pine64.org (US)
    • Direct download from pine64.uk (UK)
    • Torrent Download
    • MD5 (Zip file): DFC12CA8342FBE1E604B85B4E83C49B2
    • File Size: 703MB

• • DD image (for 64GB microSD Card):
    • Direct download from pine64.org (US)
    • Direct download from pine64.uk (UK)
    • Torrent Download
    • MD5 (Zip file): 60E9ED3D93D37A15D29A0C5A3B4F2C52
    • File Size: 830MB

Remix OS 2.0

• Remix OS 2.0 Image Release 20170105

• • Suitable for 2GB Pine A64+ Board, can runs on 1GB Pine A64+ Board with performance lagging, not suitable for 512MB Pine A64 Board
  • This build optimizes Gigabit Ethernet parameter and improves on GbE connectivity.
  • Add Remix apps market
  • Video setting supports both 720P and 1080P
  • Supports video screen scaling function
  • New MAC address assignment method, tags to board and SoC unique ID.
  • Support UVC USB camera as front camera
  • Known issues:
    • Not yet support 5M Pixel camera module as real camera
    • Even the HDMI output can set to 720P, but during boot up time, the boot logo stil maintain as 1080P.
  • DD image (for 8GB microSD Card):
    • Direct download from pine64.org (US)
    • Direct download from pine64.uk (UK)
    • Torrent download
    • MD5 (Zip file): 77E499DF8BFF9A39F9C58E04877A41B5
    • File Size: 1.10GB

• • DD image (for 16GB microSD Card):
    • Direct download from pine64.org (US)
    • Direct download from pine64.uk (UK)
    • Torrent download
    • MD5 (Zip file): CF65049DA13A4AD8BA6D4BC19D97FB35
    • File Size: 999MB

• • DD image (for 32GB microSD Card):
    • Direct download from pine64.org (US)
    • Direct download from pine64.uk (UK)
    • Torrent download
    • MD5 (Zip file): E1CA0D611307B5657BBFD73E4825C83D
    • File Size: 1.18GB

• • DD image (for 64GB microSD Card):
    • Direct download from pine64.org (US)
    • Direct download from pine64.uk (UK)
    • Torrent download
    • MD5 (Zip file): D6988832DDB5790EA2FC4DEE3CB6CCD9
    • File Size: 1.18GB

Software and OS Image Downloads

Under the 'Pine A64 Software and OS Image Download Section' you can find a complete list of currently supported Operating System images that work with the Pine A64 as well as other related software. The list includes OS images and descriptions of:

• Debian Jessie
• Arch Linux
• Ubuntu 16.04
• Remix OS
• Android 5.1
• Android 6.0
• Android 7.0
• Windows IoT
• OpenHAB

Provided are also H2testw 1.4 and F3 utilities used for checking microSD card performance, Allwinner's Phoenix Card bootable OS utility and other useful software.

Accessories Step-by-Step Guides

Under 'Guides for Pine A64 accessories' you can find instructions and guides pertaining to:

• Enclosures
• Bluetooth and WiFi module
• Real Time Clock (RTC) battery
• Real Time Clock (RTC) battery holder
• First and third party cases
• Featured 3D printed cases (and more).

SoC and Memory Specification

• Based on Allwinner A64

CPU Architecture

• Quad-core ARM Cortex-A53 Processor@1152Mhz
• A power-efficient ARM v8 architecture
• 64 and 32bit execution states for scalable high performance
• Support NEON Advanced SIMD (Single Instruction Multiple Data) instruction for acceleration of media and signal processing function
• Support Large Physical Address Extensions(LPAE)
• VFPv4 Floating Point Unit
• 32KB L1 Instruction cache and 32KB L1 Data cache
• 512KB L2 cache

GPU Architecture

• ARM Mali400MP2 Dual-core GPU
• Support OpenGL ES 2.0 and OpenVG 1.1 standard

System Memory

• RAM Memory Variants: 512MB, 1GB and 2GB.
• Storage Memory: Pine A64 boards do not have built-in Flash memory but use bootable microSD Cards or USB attached storage.

Board Features

Video

• HDMI 1.4a (Type A - full)

Audio

• 3.5mm stereo earphone/microphone plug

Network

• 10/100/1000Mbps Ethernet(Pine A64+ version), 10/100Mbps Ethernet(Pine A64 version)
• WiFi 802.11 b/g/n with Bluetooth 4.0 (optional)

Storage

• microSD - bootable, support SDHC and SDXC, storage up to 256GB
• USB - 2 USB2.0 Host port

Expansion Ports

• DSI - Display Serial Interface, 4 lanes MiPi, up to 1080P
• CSI - CMOS Camera Interface up to 5 mega pixel
• TP - Touch Panel Port, SPI with interrupt
• RTC - Real Time Clock Battery Connector
• VBAT - Lithium Battery Connector with temperature sensor input
• Wifi/BT Module Header - SDIO 3.0 and UART
• 2x20 pins "Pi2" GPIO Header
• 2x17 pins "Euler" GPIO Header
• 2x5 pins "EXP" Console Header

Pine A64 Board Information and Schematics

• Board Dimensions: 133mm x 80mm x 19mm
• Input Power: DC 5V @ 2A, 3.7V Li-Ion battery connector, microUSB connector, Euler connector
• Power Consumption: 2.5W
• Pine A64 Connector Layout @courtesy of norm24
• Pine A64 Heat Sink Location @courtesy of norm24
• Pine A64 Connector List
• Pine A64 Pi-2/Eular/Ext Bus/Wifi Bus Connector Pin Assignment (Updated 15/Feb/2016)
• Pine A64 PCB dimension
• Board Model Comparison
• Pine A64 Board Schematic:
  • Pine A64 512MB Rev B Board Schematic
  • Pine A64+ 1GB Rev B Board Schematic
  • Pine A64+ 2GB Rev C Board Schematic

Datasheets for Components and Peripherals

• Allwinner A64 SoC information:
  • Allwinner A64 SoC Brief Introduction
  • Allwinner A64 SoC Data Sheet V1.1 (Official Released Version)
  • Allwinner A64 SoC User Manual V1.0 (Official Release Version)
• X-Powers AXP803 PMU (Power Management Unit) information:
  • AXP803 PMIC Datasheet
• PINE A64, PINE A64+ and SOPINE Related:
  • 5MPixel CMOS Camera module information:
    • Pine64 YL-PINE64-4EC 5M Pixel CMOS Image Sensor Module (Description in Chinese)
    • S5K4EC 5MP CMOS Image Sensor SoC Module Datasheet
    • S5K4EC 5MP CMOS Image Sensor SoC Chip Datasheet
    • S5K4EC 5MP CMOS Image Sensor Driver Source Code in C language
    • Early version Camera module information:
      • Bonsen Kexin V118-A64-GC2145-HM5065 CMOS Image Sensor Module
      • HiMax 5MP CMOS Image Sensor SoC
  • LCD Touch Screen Panel information:
    • 7.0" 1200x600 TFT-LCD Panel Specification
    • Touch Panel Specification
    • GOODiX GT911 5-Point Capacitive Touch Controller Datasheet
  • Lithium Battery information:
    • 8000mAH Lithium Battery Specification
  • Ethernet PHY information:
    • Realtek RTL8211 10/100/1000M Ethernet Transceiver for Pine A64+ Board
    • Realtek RTL8201 10/100M Ethernet Transceiver for Pine A64 Board
  • Wifi/BT module information:
    • Realtek RTL8723BS WiFi with BT SDIO
  • Enclosure information:
    • Playbox Enclosure 3D file
    • ABS Enclosure 3D file
  • Connector information:
    • 2.0mm PH Type connector specification use in Lithium Battery (VBAT) port and RTC Battery port
    • 0.5mm Pitch cover type FPC connector specification use in DSI port, TP port and CSI port
  • Remote control button mapping
    • Official Remote Control for the Pine A64 Button Mapping

• Pinebook Related:
  • LCD Panel
    • 11.6" LCD Panel datasheet
    • 14" LCD Panel datasheet
  • Camera sensor
    • VGA Camera module specification
    • VGA Camera Sensor Data Sheet
  • Lithium Battery information:
    • 10000mAH Lithium Battery Specification for 11.6" model
    • 10000mAH Lithium Battery Specification for 14" model

Pine A64 POT

• Pine A64 Peripheral On Top (POT) and Related Devices
• WiFi Remote I2c Quick Start Guide

Other Resources

• Linux Sunxi Wiki page on Pine A64
• Collection of scripts to set up a minimal Ubuntu 14.04.3 / Debian 8 Jessie root filesystem Contributed By Uli Middelberg
• Linux Image created by Andre Przywara
• Pine A64 with HypriotOS by Dieter and Govinda
• H2testw 1.4 – Gold Standard In Detecting USB Counterfeit Drives
• F3 - an alternative to h2testw
• Benchmarking The Low-Cost PINE 64+ ARM Single Board Computer by Michael Larabel
• Pine64 Linux build scripts, tools and instructions by Longsleep
• Pine64 Linux image by Longsleep
• A series of Youtube video on PineA64 Developers Board by Michael Larson
• Pine64 Quick Start Guide (with Gotchas)
• Shrinking images on Linux by FrozenCow