Difference between revisions of "User:RemDogKap/SandBox/Status of Features"
< User:RemDogKap | SandBox
Jump to navigation
Jump to search
m (updated statuses and added color) |
m (updated notes for SD Card to mention the speed limitation) |
||
| Line 3: | Line 3: | ||
! style=width:100px | Feature !! style=width:100px | Status !! style=width:300px | Notes !! style=width:200px | More info | ! style=width:100px | Feature !! style=width:100px | Status !! style=width:300px | Notes !! style=width:200px | More info | ||
|- | |- | ||
| SD Card Boot || style="background-color:#9eff9e" | Working || | | SD Card Boot || style="background-color:#9eff9e" | Working || There is a design flaw such that the SD card can only receive 3.3V and not the 1.8V required for speeds over 20 MB/s. || #Star64 | ||
|- | |- | ||
| eMMC Boot || style="background-color:#9eff9e" | Working || || #Star64 | | eMMC Boot || style="background-color:#9eff9e" | Working || || #Star64 | ||
Revision as of 00:37, 10 June 2023
| Feature | Status | Notes | More info |
|---|---|---|---|
| SD Card Boot | Working | There is a design flaw such that the SD card can only receive 3.3V and not the 1.8V required for speeds over 20 MB/s. | #Star64 |
| eMMC Boot | Working | #Star64 | |
| UART Boot | Not Tested, assumed working | The only current known use for UART boot is the recovery tool from StarFive | |
| PCIE/NVME Boot | Partially Implemented | #Star64 @Tenkawa | |
| USB 2.0 | Working | A design flaw means that USB overcurrent protection is disabled so be careful | |
| USB 3.0 | Working | ||
| 4K Output | Partially Implemented | #Star64 @Fishwaldo | |
| 4K HDR | Not Implemented | ||
| H.264 | Not Implemented | ||
| H.265 | Not Implemented | ||
| 3.5mm audio Jack | Working | ||
| Ethernet | Working | ||
| Wifi | working | ||
| PCIe 2.0 ×1 lane | Working | ||
| "Pi2" GPIO | Working | ||
| TTL UART | Working |