Difference between revisions of "Pinecil Cases, Stands, Supplies"
Jump to navigation
Jump to search
Line 38: | Line 38: | ||
* Tip Refresher/tinner: [https://www.aliexpress.us/item/2251832764094798.html Mechanic MCN-20 lead-solder version], or the [https://www.aliexpress.us/item/2251832803171199.html Lead-free version] (use when the tip is very dirty and solder is not sticking to it). | * Tip Refresher/tinner: [https://www.aliexpress.us/item/2251832764094798.html Mechanic MCN-20 lead-solder version], or the [https://www.aliexpress.us/item/2251832803171199.html Lead-free version] (use when the tip is very dirty and solder is not sticking to it). | ||
* [https://a.co/d/cLELK10 ESD Tweezers with case], budget set. | * [https://a.co/d/cLELK10 ESD Tweezers with case], budget set. | ||
* Flux [https://amtechdirect.com/collections/tf-v3 NC-559-V3 from amtechdirect] comes in a paste or syringe. There is a lot of fake Amtech online. Amtech is made in the USA and sold by 2 different companies. Many reports of cheap Aliexpress fake fluxes that simply do not work, ymmv. | * Flux [https://amtechdirect.com/collections/tf-v3 NC-559-V3 from amtechdirect] comes in a paste or syringe. There is a lot of fake Amtech online. Amtech is made in the USA and sold by 2 different companies. Many reports of cheap Aliexpress fake fluxes that simply do not work, ymmv. | ||
* Flux [https://www.aliexpress.us/item/2255799906019322.html Relife RL-422-IM] Halogen-free, low cost alternative. | * Flux [https://www.aliexpress.us/item/2255799906019322.html Relife RL-422-IM] Halogen-free, low cost alternative. | ||
* Flux syringe [https://a.co/d/2OFijCQ Chip Quik SMD291] | * Flux syringe [https://a.co/d/2OFijCQ Chip Quik SMD291] | ||
* [https://a.co/d/g01udsS Solder Wick, variety pack]: helps remove solder. First add flux to the area and also to the solder wick itself to add in removal of old solder. | * [https://a.co/d/g01udsS Solder Wick, variety pack]: helps remove solder. First add flux to the area and also to the solder wick itself to add in removal of old solder. | ||
* Solder: | * [https://a.co/d/ilor7wI Weller Lead-Free Solder, 3 pack]: variety of sizes for portable kits & sampling three common useful sizes (0.3,0.5,0.8). | ||
* Solder: first decide if you want to use No-lead or leaded. Leaded is easier to work with at lower temperatures. No-lead is used now by all manufacturers of electronics per ROHS. Depending on the work being done different sizes might be needed, for example, 0.3mm for small work, 0.5mm for pins, and larger 0.8mm+ for thicker wires. One could make due with smaller solder by folding a piece in half and twisting it to make it thicker. See the video below to help compare types. | |||
Videos comparing expensive and budget flux and solder (includes links to items). | Videos comparing expensive and budget flux and solder (includes links to items). |
Revision as of 00:55, 30 March 2023
The article contains information about cases, holders/stands, 3D-models, and supplies for the Pinecil soldering iron. This is a small set of examples based on the many questions asked every week in the live pinecil chat channel. There may be better althernatives depending on your part of the world, but this gives an idea of some possible options.
Cases and bags
- EVA Shockproof Case
- Zippered Case
- Aluminum hard case w/foam (check size before ordering if multiple listed).
- Aluminum poker case w/foam
- Soft Bag Molle IFAK/EDC: look for bags that can fully open like a sandwich when unzipped which allows tools to be easily seen and retrieved. Bags that only partially unzip make it harder to find tools without dumping out the whole bag.
Holders and stands
- Noah Metal Stand with Brass wool
- YiHua X-4 Stand with Tip Holder, Brass Wool & hard rosin inside for tip cleaning
- Yihua X-2 Stand on Amazon
- Yihua X-2 Stand on Aliexpress, and alternate X-2 Stand
- Hakko FH300-81
- Pine Store Portable Mini Stand
3D models
- Pinecil handle shell by JeKo1987
- Pinecil compact case by operator7g
- Pinecil flip case by ithan
- Multipart Pinecil Case by Pjotrke
- Thingiverse search for 'Pinecil'
- Reuse the clear plastic box that comes with the clear handle.
- T12 tip adapter for outside tip holding
- T12 tip adaptor to protect the internal Mosfet in Pinecil.
- 3D models of Pinecil by kohkoh
Pictures
3D Models:
Soldering supplies
- Brass w/Rosin - Brass Wool with hard rosin in the bottom for tip cleaning. Twirl the tip in the brass wool often during soldering to keep the tip clean. Lower the temperature and dip lower into the hard rosin when you need a deeper cleaning.
- Tip Refresher/tinner: Mechanic MCN-20 lead-solder version, or the Lead-free version (use when the tip is very dirty and solder is not sticking to it).
- ESD Tweezers with case, budget set.
- Flux NC-559-V3 from amtechdirect comes in a paste or syringe. There is a lot of fake Amtech online. Amtech is made in the USA and sold by 2 different companies. Many reports of cheap Aliexpress fake fluxes that simply do not work, ymmv.
- Flux Relife RL-422-IM Halogen-free, low cost alternative.
- Flux syringe Chip Quik SMD291
- Solder Wick, variety pack: helps remove solder. First add flux to the area and also to the solder wick itself to add in removal of old solder.
- Weller Lead-Free Solder, 3 pack: variety of sizes for portable kits & sampling three common useful sizes (0.3,0.5,0.8).
- Solder: first decide if you want to use No-lead or leaded. Leaded is easier to work with at lower temperatures. No-lead is used now by all manufacturers of electronics per ROHS. Depending on the work being done different sizes might be needed, for example, 0.3mm for small work, 0.5mm for pins, and larger 0.8mm+ for thicker wires. One could make due with smaller solder by folding a piece in half and twisting it to make it thicker. See the video below to help compare types.
Videos comparing expensive and budget flux and solder (includes links to items).
Go back to Pinecil article
Go back to Pinecil article.