Difference between revisions of "Pinecil Cases, Stands, Supplies"
Jump to navigation
Jump to search
(Updated headlines) |
|||
| Line 26: | Line 26: | ||
=== Soldering supplies === | === Soldering supplies === | ||
* | * [https://www.aliexpress.us/item/2251832826887062.html '''Brass w/Rosin'''] - Brass Wool with hard rosin in the bottom for tip cleaning. Twirl the tip in the brass wool often during soldering to keep the tip clean. Lower the temperature and dip lower into the hard rosin when you need a deeper cleaning. | ||
* Tip Refresher/tinner | * Tip Refresher/tinner: [https://www.aliexpress.us/item/2251832764094798.html '''Mechanic MCN-20 lead-solder version'''], or the [https://www.aliexpress.us/item/2251832803171199.html '''Lead-free version'''] (used when the tip is very dirty). | ||
* | * [https://a.co/d/cLELK10 '''ESD Tweezers with case'''], budget set. | ||
* | * [https://a.co/d/ilor7wI '''Weller Lead-Free Solder''']: 3-pack variety sizes for portable kits & sampling 3 common useful sizes (0.3/0.5/0.8mm). | ||
* | * [https://amtechdirect.com/collections/tf-v3 '''NC-559-V3 from amtechdirect''']: Amtech flux comes in a paste or convenient syringe). Be careful, there is a lot of fake Amtech online. Amtech is made in the USA, avoid flux from Aliexpress, many reports of flux that simply does not work and appears to be fake mixtures. | ||
* | * [https://a.co/d/g01udsS '''Solder Wick''', variety pack]: helps to remove solder. Works best to add a lot of flux to the area and solder wick for the best removal of solder. | ||
=== Go back to Pinecil article === | === Go back to Pinecil article === | ||
Revision as of 18:00, 16 February 2023
The article contains information about cases, stands, 3D-models and supplies for the Pinecil.
Cases and bags
- EVA Shockproof Case
- Zippered Case
- Aluminum hard case w/foam (check size before ordering if multiple listed).
- Aluminum poker case w/foam
- Soft Bag Molle IFAK/EDC: look for bags that can fully open like a sandwich when unzipped which allows tools to be easily seen and retrieved. Bags that only partially unzip make it harder to find tools without dumping out the whole bag.
Holders and stands
- Noah Metal Stand with Brass wool
- YiHua X-4 Stand with Tip Holder, Brass Wool & hard rosin inside for tip cleaning
- Yihua X-2 Stand on Amazon
- Yihua X-2 Stand on Aliexpress, and alternate X-2 Stand
- Hakko FH300-81
- Pine Store Portable Mini Stand
3D models
- Pinecil compact case
- Pinecil and tips case
- 3D model of Pinecil by kohkoh
- T12 tip adaptor to protect internal Mosfet in Pinecil
- T12 tip adapter for outside tip holding
- Thingiverse search for 'Pinecil'
- Multipart Pinecil Case by Pjotrke
Soldering supplies
- Brass w/Rosin - Brass Wool with hard rosin in the bottom for tip cleaning. Twirl the tip in the brass wool often during soldering to keep the tip clean. Lower the temperature and dip lower into the hard rosin when you need a deeper cleaning.
- Tip Refresher/tinner: Mechanic MCN-20 lead-solder version, or the Lead-free version (used when the tip is very dirty).
- ESD Tweezers with case, budget set.
- Weller Lead-Free Solder: 3-pack variety sizes for portable kits & sampling 3 common useful sizes (0.3/0.5/0.8mm).
- NC-559-V3 from amtechdirect: Amtech flux comes in a paste or convenient syringe). Be careful, there is a lot of fake Amtech online. Amtech is made in the USA, avoid flux from Aliexpress, many reports of flux that simply does not work and appears to be fake mixtures.
- Solder Wick, variety pack: helps to remove solder. Works best to add a lot of flux to the area and solder wick for the best removal of solder.
Go back to Pinecil article
Go back to Pinecil article.