Difference between revisions of "PinePhone Software Releases"

From PINE64
Jump to navigation Jump to search
m (→‎Maemo Leste: update download link)
(→‎Mobian: update and add dates so that this will still make sense if people forget to update when Debian/trixie becomes Debian/stable)
 
(691 intermediate revisions by 81 users not shown)
Line 1: Line 1:
This page contains a list of all available releases and tools for the [[PinePhone]] in alphabetical order.


This page is intended to help you install a software release on your PinePhone. In addition it provides details of all the available releases so that you can do some background reading about them to help inform your choice. Finally it provides a number of links to other resources related to your PinePhone.  
{{Info|Some releases may not have a good setup for the backlight at low brightness. If configured too low, the backlight shuts down completely, but the screen is still displayed and usable in bright front-light.}}


= Release installation =
See [[PinePhone Installation Instructions]] on how to install the operating systems. Please see [[PinePhone Updating Instructions]] for how to update the phone.


Initial (new) release installation should be to a micro SD card. It is recommended to choose a card with fast I/O of small files for best performance of your PinePhone. Generic installation instructions are in this section, please see the releases below for specific installation options they may offer/require.
== Software Releases ==


'''Don't forget your Braveheart phone ships with a film of plastic between the battery and the phone. You need to open the back cover (gently) and remove the film before the phone will switch on! '''
=== Arch Linux ARM ===
[[File:Archlinux-logo.png|right|100px]]


== Preparation of SD card ==
(Unofficial) Arch Linux ARM with choice of Phosh UI, Plasma Mobile, sxmo or barebones. It is maintained by the [https://danctnix.org/ DanctNIX] community (GitHub: [https://github.com/DanctNIX/danctnix danctnix], [https://github.com/dreemurrs-embedded dreemurrs-embedded]).
# Download your chosen image from the options below
# Extract the compressed file
# Write the image to your SD card
# Plug SD card into phone
# Boot phone
If you need step-by-step instructions for writing an image to an SD card, check [[NOOB#Step-by-Step_Instructions_to_Flashing_MicroSD_Cards]] then return to this page.


== Installation to eMMC ==
==== Download ====
* Prepare a new SD card as above
* Boot the phone
* Run a magic script (to be defined/written/...)


<div class="center" style="background-color: lightyellow;">[[#top | '''Return to top of page''']]</div>
Get both stable and test builds at [https://github.com/dreemurrs-embedded/Pine64-Arch/releases GitHub releases].


= Software Releases =
{| class="wikitable"
!colspan="2" style="background: #a7d7f9;"| Default credentials
|-
! Default user
| <code>alarm/123456</code>
|-
! root (barebone only)
| <code>root/root</code>
|}


== postmarketOS ==
==== Notes ====
http://files.pine64.org/sw/pine64_installer/json/postmarketos.png


* ''' Download location '''
* There are ''archmobile'' chat rooms on Matrix ([https://matrix.to/#/#archmobile:kde.org #archmobile:kde.org]) and Telegram ([https://t.me/archmobile @archmobile]).
postmarketOS offers a choice of several desktop environments including Plasma Mobile and phosh. Rather than downloading a demo image [https://wiki.postmarketos.org/wiki/Installation_guide they recommend] the use of their script, pmbootstrap, that can tailor build your SD card for you. The script automates steps 1,2 & 3 above. See for example [https://forum.pine64.org/showthread.php?tid=8285 this forum thread.]
* Feel free to send us [https://github.com/dreemurrs-embedded/Pine64-Arch/pulls pull requests] and reports [https://github.com/dreemurrs-embedded/Pine64-Arch/issues issues] on [https://github.com/dreemurrs-embedded/Pine64-Arch GitHub].
----


Note pmbootstrap offers an option [https://wiki.postmarketos.org/wiki/PINE64_PinePhone_(pine64-pinephone)#Installation to install to the eMMC.]
=== ExpidusOS ===


[http://images.postmarketos.org/pinephone/ Demo images can be found here.]
A fork of [https://voidlinux.org Void Linux] with a custom fork of XFCE called [https://github.com/ExpidusOS/genesis Gensis] as the default desktop environment, developed by [https://midstall.com/ Midstall Software].


* ''' user-id/password '''
* [https://expidusos.com ExpidusOS official website]
demo/147147 (for demo images only - when building an image with pmbootstrap you set your own user-id and password.)
* [https://wiki.expidusos.com/index.php/Main_Page ExpidusOS Wiki]
* [https://discord.gg/GVfBF2w Midstall Software Discord server]
* GitHub: [https://github.com/ExpidusOS ExpidusOS]


* ''' What works, what does not work '''
==== Download ====
See [https://wiki.postmarketos.org/wiki/PINE64_PinePhone_(pine64-pinephone) postmarketOS wiki page]


* ''' Where/how to report defects '''
Check the [https://expidusos.com/download download page] for that latest version, or the [https://build.expidusos.com/ image file list] for all versions, look for the filename that starts with "pinephone".
[https://gitlab.com/postmarketOS/postmarketos/issues/3 postmarketOS issue tracker for PinePhone support]


* ''' Contributions '''
{| class="wikitable"
[https://wiki.postmarketos.org/wiki/Contributing See postmarketOS wiki for options to contribute.]
!colspan="2" style="background: #a7d7f9;"| Default credentials
|-
! Default user
| <code>expidus/expidus</code>
|}


<div class="center" style="background-color: lightyellow;">[[#top | '''Return to top of page''']]</div>
==== Notes ====


== Ubuntu Touch by UBPorts ==
What works, what does not work:
http://files.pine64.org/sw/pine64_installer/json/ubports.png


* ''' Download location '''
* The ExpidusOS Wiki has a page detailing [https://wiki.expidusos.com/index.php/Device:PinePhone supported features].
[https://gitlab.com/ubports/community-ports/pinephone See UBports gitlab page.]


* ''' user-id/password '''
How to contribute and report defects:


* ''' What works, what does not work '''
* Join the [https://discord.gg/GVfBF2w Discord server] or corresponding repo at GitHub ([https://github.com/orgs/ExpidusOS/repositories repo list]).


* ''' Where/how to report defects '''
----
[https://gitlab.com/ubports/community-ports/pinephone See UBports gitlab page.]


* ''' Contributions '''
=== Fedora ===
[https://ubports.com/foundation/sponsors See UBports website for how to donate.]
[[File:Fedora1.png|right|100px]]


<div class="center" style="background-color: lightyellow;">[[#top | '''Return to top of page''']]</div>
An (unofficial) vanilla Fedora rawhide build for aarch64 with megi's kernel and [https://copr.fedorainfracloud.org/coprs/njha/mobile/packages/ some additional packages] to tie it all together.
It aims to eventually be an upstream part of the Fedora project, rather than a phone-specific distribution.


== Manjaro ARM ==
* Forum discussion: [https://forum.pine64.org/showthread.php?tid=9347 Fedora + Phosh for PinePhone]
http://files.pine64.org/sw/pine64_installer/json/manjaro.png
* GitLab: [https://gitlab.com/fedora/sigs/mobility]


* ''' Download location '''
==== Download ====
DD image for 8GB micro SD-card /16GB eMMC module and above: [https://osdn.net/projects/manjaro-arm/storage/pinephone/plasma-mobile/alpha2/ Alpha2 release direct download from manjaro.org]


* ''' user-id/password '''
* [https://github.com/nikhiljha/pp-fedora-sdsetup          Build scripts]
** manjaro/manjaro
* [https://copr.fedorainfracloud.org/coprs/njha/mobile/   Packages (Fedora COPR)]
** root/root


* ''' What works, what does not work '''
There is also an FTP server with images build every night @ ftp://pine.warpspeed.dk/nightly/pinephone/ (Mount this with something like Nautilus)
[https://forum.manjaro.org/t/manjaro-arm-alpha2-for-pinephone-and-pinetab/117266 See Manjaro announcement.]


* ''' Where/how to report defects '''
{| class="wikitable"
!colspan="2" style="background: #a7d7f9;"| Default credentials
|-
! Nightly images (via FTP)
| <code>pine/1111</code>
|}


* ''' Contributions '''
==== Notes ====
[https://forum.manjaro.org/t/manjaro-arm-alpha2-for-pinephone-and-pinetab/117266 See the end of the announcement here.]


<div class="center" style="background-color: lightyellow;">[[#top | '''Return to top of page''']]</div>
WiFi, Bluetooth, SMS, Data, Calls all work! There are still a few bugs though, and [https://xnux.eu/devices/pine64-pinephone.html#toc-feature-driver-support-matrix some features don't have driver support yet] on any PinePhone distribution.


== KDE Neon ==
Please send your bug reports to [https://github.com/nikhiljha/pp-fedora-sdsetup/issues the project's issue tracker]. Be sure to include logs if applicable! Send us pull requests on [https://gitlab.com/groups/fedora/sigs/mobility/-/issues].
http://files.pine64.org/sw/pine64_installer/json/plasma_mobile.png


* ''' Download location '''
----
[https://images.plasma-mobile.org/pinephone/ Plasma mobile images can be found here.]


* ''' user-id/password '''
=== Gentoo ===
[[File:GentooLogo.png|right|100px]]


* ''' What works, what does not work '''
There are unofficial Gentoo overlays with ebuilds for the PinePhone. There are no images - the image must be built manually, including picking the kernel, bootloader and the desired desktop environment. The ARM64 version of Gentoo has to be selected.


* ''' Where/how to report defects '''
==== Download ====


* ''' Contributions '''
Overlay locations:


<div class="center" style="background-color: lightyellow;">[[#top | '''Return to top of page''']]</div>
* https://git.gjdwebserver.nl/gjdwebserver/gjdwebserver-overlay


== SailfishOS ==
==== Notes ====
http://files.pine64.org/sw/pine64_installer/json/sailfishos.png


* ''' Download location '''
The documentation can be found here:
The SailfishOS image is built on Gitlab CI. The latest image can be installed using the [https://raw.githubusercontent.com/sailfish-on-dontbeevil/flash-it/master/flash-it.sh flashing script].


The script downloads the image and bootloader from our CI, extracts everything and burns it onto the SD card.
* https://blog.gjdwebserver.nl/ords/f?p=107:HOME:::::ARTICLE:gentoo-on-a-pinephone
* https://blog.gjdwebserver.nl/ords/f?p=107:HOME:::::ARTICLE:gentoo-on-a-pinephone-making-it-a-usable-phone
* https://blog.gjdwebserver.nl/ords/f?p=107:HOME:::::ARTICLE:gentoo-on-a-pinephone-pro
* https://wiki.gentoo.org/wiki/User:Dr41nU/PinePhone
* https://wiki.gentoo.org/wiki/PinePhone (incomplete)


''Instructions:''
{{Info|Please consider cross-compiling the software on the computer. Long compilation times and heat production can lead to a reduced lifespan of the phone.}}


----
=== GloDroid ===
A fully open-source port of Android and LineageOS to the PinePhone.
GitHub: [https://github.com/GloDroidCommunity/pine64-pinephone GloDroid]
==== Download ====
* Releases: [https://github.com/GloDroidCommunity/pine64-pinephone/releases GloDroid]
==== Notes ====
Feature overview:
* Works: WiFi, screen dimming, sound, touchscreen, charging and telephony(partially) works.
* Doesn't work: Bluetooth and GPS
* See more at [https://github.com/GloDroidCommunity/pine64-pinephone/issues/2 project status page]
----
=== Kali Linux ===
[[File:Kali-logo.png|right|200px]]
The official Kali Nethunter images for PinePhone and PinePhone Pro have been released now. For older/unofficial releases, you can still download from the GitHub releases page. Get [https://github.com/Shubhamvis98/nethunter-pinephone Nethunter App] for your PinePhone's Kali Linux. Packet Injection is working now, use iwconfig instead of airmon-ng.
==== Download ====
* [https://github.com/Shubhamvis98/kali-pinephone/releases Kali Phosh Unofficial]
* [https://www.kali.org/get-kali/#kali-mobile Kali Nethunter Pro Official]
{{Warning|There are reports that the official Kali images fail to boot.}}
{| class="wikitable"
!colspan="2" style="background: #a7d7f9;"| Default credentials
|-
! Default user for Unofficial Releases
| <code>kali/8888</code>
|-
! Default user for Nethunter Releases
| <code>kali/1234</code>
|}
==== Notes ====
For the installation see the installation instructions under [[PinePhone Installation Instructions]]
----
=== LuneOS ===
[[File:Luneos-logo-256.png|right|100px]]
LuneOS is one of the original multi-tasking OS-es that runs on Linux. Based on HP/Palm's webOS, merged with latest technology stack from LG called webOS OSE (a derivative of what LG uses on their Smart TV's), software such as Qt5 and makes use of the Yocto build system.
* [https://www.webos-ports.org/wiki/Main_Page WebOS Ports Wiki]
* [https://webos-ports.org/wiki/Pinephone_Info WebOS-Ports Wiki's Pinephone page]
* GitHub: [https://github.com/webOS-ports WebOS Ports]
==== Download ====
* LuneOS Preview images: [https://github.com/webOS-ports/meta-pine64-luneos/releases Downloads]
{| class="wikitable"
!colspan="2" style="background: #a7d7f9;"| Default credentials
|-
! Default user
| <code>root</code>
|}
==== Notes ====
In order to connect to the device using SSH/SCP via WiFi: You can simply connect via SSH/SCP via WiFi using the PinePhone's IP address on port 22.
----
=== Maemo Leste ===
[[File:Maemoleste-logo.png|right|100px]]
[https://en.wikipedia.org/wiki/Maemo Maemo] is a trimmed-down version of Debian for mobile devices,
originally a collaboration between Nokia and many open source projects (the [http://maemo.org/intro/ Maemo community]) before Nokia abandoned it. The more well-known devices Maemo supports are the OpenMoko and N900. The community now takes full responsibility in developing fully open source Maemo for a variety of mobile devices. You may be interested to learn more about the features in their [https://leste.maemo.org/Leste_FAQ Maemo Leste FAQ].
Maemo 8 "Leste" is an ARM64 port of [https://devuan.org/ Devuan] (Debian without systemd) and runs the mainline Linux kernel.
The default user interface stack is [https://en.wikipedia.org/wiki/Hildon Hildon], [https://en.wikipedia.org/wiki/X.Org_Server Xorg], [https://en.wikipedia.org/wiki/Matchbox_(window_manager) Matchbox WM], and [https://en.wikipedia.org/wiki/GTK GTK].
==== Download ====
* [http://maedevu.maemo.org/images/pinephone/ Maemo Leste test builds]
There is also an [https://github.com/maemo-leste/image-builder image builder], see the wiki for instructions on how to [https://leste.maemo.org/Image_Builder build a custom image]. For current status and instructions, please read their [https://leste.maemo.org/PinePhone PinePhone wiki page].
{| class="wikitable"
!colspan="2" style="background: #a7d7f9;"| Default credentials
|-
! root
| <code>toor</code>
|-
! user
| <code>12345 (lockscreen)</code>
|}
==== Notes ====
Most discussion occurs at  [ircs://irc.libera.chat:6697/#maemo-leste <code>#maemo-leste</code> on <code>irc.libera.chat</code>] and [https://talk.maemo.org/showthread.php?t=100192&page=60 this thread].
All other contact information is listed on the [https://leste.maemo.org/Main_Page main page] of the Maemo wiki.
Submit [https://github.com/maemo-leste/bugtracker/issues bug reports] on github.
To track known issues, you may use these search terms:
[https://github.com/maemo-leste/bugtracker/issues?utf8=%E2%9C%93&q=is%3Aissue+is%3Aopen+pinephone pinephone],
[https://github.com/maemo-leste/bugtracker/issues?utf8=%E2%9C%93&q=is%3Aissue+is%3Aopen+pine64 pine64].
----
=== Manjaro ARM ===
[[File:Manjaro-logo.svg|right|100px]]
Manjaro is a user-friendly Linux distribution based on the independently developed Arch operating system with the Plasma Mobile and Phosh desktop environment.
==== Download ====
* Phosh: [https://github.com/manjaro-pinephone/phosh-dev/releases Dev] and [https://github.com/manjaro-pinephone/phosh/releases Stable]
* Plasma Mobile: [https://github.com/manjaro-pinephone/plasma-mobile-dev/releases Dev] and [https://github.com/manjaro-pinephone/plasma-mobile/releases Stable]
* Lomiri: [https://github.com/manjaro-pinephone/lomiri-dev Dev] (unmaintained)
{| class="wikitable"
!colspan="2" style="background: #a7d7f9;"| Default credentials (Only Phosh)
|-
! Default user
| <code>manjaro/123456</code>
|-
! root
| <code>root/root</code>
|}
==== Notes ====
The installation of the stable images is strongly suggested. The dev images might break frequently.
----
=== Mobian ===
[[File:Debian-logo.png|right|100px]]
An unofficial [https://www.debian.org Debian] build for ARM64 running with Phosh. The base Debian systems available are an old version of [https://www.debian.org/releases/stable Debian stable] (Bookworm 12.0 since June 2023), and [https://www.debian.org/releases/testing Debian testing] (Trixie since June 2023). The ''testing'' version has many more features and bug fixes than the ''stable'' version, but new bugs are more likely; the ''stable'' version should be upgraded to the most recent stable release after installing. See the installation instructions [https://wiki.debian.org/InstallingDebianOn/PINE64/PinePhone on the Debian wiki]. If you have questions about Mobian, please ask them in the [https://matrix.to/#/#mobian:matrix.org Mobian Matrix room].
==== Download ====
* [https://images.mobian.org/pinephone/ Images] (top directory: ''Debian/stable''; "weekly" directory: ''Debian/testing'')
{{Info|[https://tow-boot.org/devices/pine64-pinephoneA64.html Tow-Boot is required] to be able to boot the images!}}
{| class="wikitable"
!colspan="2" style="background: #a7d7f9;"| Default credentials
|-
! Default user
| <code>mobian/1234</code>
|}
==== Notes ====
* Development is active. See [https://wiki.debian.org/Mobian the Mobian wiki].
* In order to connect to the device using SSH/SCP via WiFi, you need to install SSH on the device. You can do this by executing the following in a shell: "sudo apt-get install ssh", afterwards you can connect via SSH/SCP via WiFi using the PinePhone's IP address on port 22.
----
=== Multi-distro demo image ===
{{Warning|This is a demo image for testing different operating systems before installing a regular image. Attempting to use this image productively is highly discouraged. The kernel is shared across the different operating systems and is not updated.}}
This image allow users to try many Linux distributions easily, without having to figure out how to flash them individually and juggle with many microSD cards. Also called megi's 15-in-1 multi boot image.
* Main page: https://xnux.eu/p-boot-demo/
* Git repo: https://megous.com/git/pinephone-multi-boot/
* Forum discussion: [https://forum.pine64.org/showthread.php?tid=11347 15-distro multi-boot image for Pinephone]
==== Download ====
'''Update 2022-01-26, using megi's kernel 5.16.2'''
DD image to SD card and boot. This image is for 16GiB or larger SD cards, also works if flashed to eMMC.
This is also a good build for charging depleted battery. Just boot up this build with power supply connected, keep the PinePhone charging for 3 hours at power down stage.
For more info on this build, please visit its entry the "News" section of its [https://xnux.eu/p-boot-demo/ web page].
* [https://dl.xnux.eu/p-boot-multi-2022-01-26.torrent Download torrent file from author's website]
* [http://dl.xnux.eu/p-boot-multi-2022-01-26/ Download img.zst from author's website] (speed limited to 512KiB/s)
* [http://mirror.uxes.cz/dl.xnux.eu/ Download torrent and img.zst from discord user uxes' mirror]
** '''File name:''' multi.img.zst
** '''SHA-256:''' <span style="word-break: break-all">39915b9d2aa2f33fd78552ac9a0e665c4aef97dd68a9f9a6c76f9fa2f0ac049e</span>
** '''File Size:''' 6.9GiB
Due to its size, download though torrent is suggested by the author on its main page.
{| class="wikitable"
!colspan="2" style="background: #a7d7f9;"| Default credentials
|-
! General
| <code>1111</code>
|-
! sxmo
| <code>user/1111</code>
|-
! Manjaro
| seems to insist on <code>123456</code>
|}
==== Notes ====
{{Info | Note about zstd) archive file (<code>.zst</code>):
On Linux, you may install or compile <code>zstd</code>, then write the image to SD card by piping <code>zstdcat</code> and <code>dd</code>. See the "Installation" section of its [https://xnux.eu/p-boot-demo/ web page] for command examples.
On Windows, instead of the offical [https://github.com/facebook/zstd zstd] command line program, you may use [https://github.com/mcmilk/7-Zip-zstd 7-zip-zstd]. Different installation method is provided in their README. Install 7-Zip-zstd / zstd, extract the disk image file (<code>.img</code>) from the zstd archive, and flash with tools like [https://sourceforge.net/projects/win32diskimager/ Win32 Disk Imager].}}
Also see [[PinePhone Installation Instructions]].
----
=== Nemo Mobile ===
[[File:nemo_mobile.png|right|100px]]
Nemo Mobile is the open source build of Sailfish OS with a open source UI called [http://nemomobile.net/glacier-home/ Glacier], [http://nemomobile.net/pages/Hello_manjaro/ based on Manjaro].
==== Download ====
[https://img.nemomobile.net/2022.05/Manjaro-ARM-nemomobile-pinephone-0.9.img.xz Image]
{| class="wikitable"
!colspan="2" style="background: #a7d7f9;"| Default credentials
|-
! Default user
| <code>manjaro/123456</code>
|-
! root
| <code>root/root</code>
|}
==== Notes ====
The website of the Nemo Mobile UX Team can be found [https://nemomobile.net/ here]. Please report bugs regarding the Nemo Mobile UI as [https://github.com/nemomobile-ux/main/issues GitHub issue].
----
=== NixOS ===
[[File:NixOS.webp|right|100px]]
NixOS is a Linux distribution built on top of the Nix package manager using declarative configuration to allow reliable system upgrades.
==== Download ====
There is a guided installer by the [https://mobile.nixos.org/devices/pine64-pinephone.html Mobile NixOS] project available. An installer image that can be flashed to a sdcard can be downloaded from the [https://hydra.nixos.org/job/mobile-nixos/unstable/installer.pine64-pinephone Hydra build instance].
Users that want to build a local image, are expected to follow the instructions in the [https://mobile.nixos.org/getting-started.html Getting Started page],
and [https://mobile.nixos.org/devices/pine64-pinephone.html Project's device page].
==== Notes ====
Project home page: [https://mobile.nixos.org/ Mobile NixOS]
----
=== OpenMandriva Lx ===
[[File:Oma-logo-22042013_300pp.png|right|100px]]
OpenMandriva Lx with Plasma Mobile as UI.
==== Download ====
The official image can be found [https://sourceforge.net/projects/openmandriva/files/release/4.2/RC/Pinephone/ at sourceforge.net].
See [https://www.openmandriva.org/en/news/article/openmandriva-lx-4-3-rc-available-for-testing here] for the offical announcement.
==== Notes ====
{{Info| This image is solely for testing purposes.}}
----
=== openSUSE ===
[[File:SLEM-OS-logo.png|right|100px]]
Our images use the same [https://en.opensuse.org/Portal:Tumbleweed openSUSE Tumbleweed] base as our desktop images,
except what needs to be changed for the PinePhone.
The images include <i>zypper</i> (RPM) as the default package manager,
and have access to virtually the same (open source) software as our desktop repositories,
thanks to the [https://en.opensuse.org/Portal:Factory Factory] ports.
Using [https://en.opensuse.org/SDB:DNF dnf] is possible, if preferred.
==== Download ====
* [https://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/PinePhone/images/openSUSE-Tumbleweed-ARM-PHOSH-pinephone.aarch64.raw.xz Phosh] / [https://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/PinePhone/images/openSUSE-Tumbleweed-ARM-PHOSH-pinephone.aarch64.raw.xz.sha256 SHA-256] / [https://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/PinePhone/images/openSUSE-Tumbleweed-ARM-PHOSH-pinephone.aarch64.raw.xz.sha256.asc SHA-256 Signature]
* [https://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/PinePhone/images/openSUSE-Tumbleweed-ARM-PLAMO-pinephone.aarch64.raw.xz Plasma Mobile] / [https://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/PinePhone/images/openSUSE-Tumbleweed-ARM-PLAMO-pinephone.aarch64.raw.xz.sha256 SHA-256] / [https://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/PinePhone/images/openSUSE-Tumbleweed-ARM-PLAMO-pinephone.aarch64.raw.xz.sha256.asc SHA-256 Signature]
To verify the images you need to import [https://build.opensuse.org/projects/devel:ARM:Factory:Contrib:PinePhone/public_key our GPG key].
Keep on mind that the first boot may stay on black screen for about a minute - consequent boots should be faster.
You can find install instructions at [https://en.opensuse.org/HCL:PinePhone#Installing_openSUSE_in_a_Pinephone this section] in the openSUSE Wiki.
{| class="wikitable"
!colspan="2" style="background: #a7d7f9;"| Default credentials
|-
! Default user
| <code>pine/1234</code>
|-
! root
| <code>root/linux</code>
|}
==== Notes ====
You can find all information about the releases of the project [https://gitlab.com/slem.os/slem.os/-/blob/master/CHANGELOG.md here].
Detailed information, tips and troubleshooting suggestions are also provided at [https://en.opensuse.org/HCL:PinePhone the openSUSE Wiki].
You will also find information in our wiki on how to report issues (Contributing section).
----
=== postmarketOS ===
[[File:PostmarketOS_logo.png|right|100px]]
postmarketOS extends [https://www.alpinelinux.org/ Alpine Linux] to run on smartphones and other mobile devices.
It offers various user interfaces (Phosh, Plasma Mobile, Sxmo, Plasma Desktop, Gnome 3, Kodi, XFCE4, ...).
==== Download ====
[https://postmarketos.org/download/ Download page]
{| class="wikitable"
!colspan="2" style="background: #a7d7f9;"| Default credentials
|-
! Test images user
| <code>user/147147</code>
|}
==== Notes ====
As of writing, official images are provided with Phosh, Plasma Mobile and Sxmo.
The official images come in two flavors, either as a test image to try out postmarketOS, or with the installer.
When using the installer images (recommended), it is possible to:
* encrypt the installation
* install from the SD card to eMMC
Power users may also create their own image with the distribution's install and development tool <code>pmbootstrap</code>.
See the [https://wiki.postmarketos.org/wiki/PINE64_PinePhone_(pine64-pinephone) pine64-pinephone] page of the postmarketOS wiki for details.
----
=== Rhino Linux ===
[[File:rhino-linux-logo.png|right|100px]]
Rhino Linux is an Ubuntu-based distribution that uses the rolling-release model by tracking the <code>devel</code> branch of repositories. The port is currently maintained by Oren Klopfer (oklopfer).
Tow-Boot is required for installing Rhino Linux. Instructions for installing Tow-Boot to the PinePhone can be found [https://tow-boot.org/devices/pine64-pinephoneA64.html here]. After Tow-Boot has been installed to your device, Rhino Linux installation just requires flashing the <code>.img.xz</code> to an SD or the eMMC.
==== Download ====
[https://rhinolinux.org/download.html Rhino Linux Downloads] (select Pine64 on the dropdown)
{| class="wikitable"
!colspan="2" style="background: #a7d7f9;"| Default credentials
|-
! Default user
| <code>rhino/1234</code>
|}
==== Notes ====
Foundational to the distribution is [https://pacstall.dev Pacstall], a Debian-based user repository inspired by the AUR. Additionally, RL comes with [https://rhinolinux.org/unicorn/ Unicorn], a custom modified version of XFCE with various modernizations and improvements, including auto-rotation for mobile devices.
[https://discord.gg/reSvc8Ztk3 Discord] - [https://matrix.to/#/#rolling-rhino-remix:matrix.org Matrix] - [https://github.com/rhino-linux GitHub] - [https://rhinolinux.org/wiki.html Wiki]
----
=== Sailfish OS ===
[[File:SailfishOS_logo.png|right|100px]]
[https://sailfishos.org/ Sailfish OS] is a Linux-based operating system based on open source projects such as [https://wiki.merproject.org/wiki/Main_Page Mer], and a closed source UI based on [https://sailfishos.org/wiki/Lipstick Lipstick].
* [https://wiki.merproject.org/wiki/Adaptations/PinePhone64 PinePhone Wiki Page] on Mer Wiki, for both Nemo Mobile and Sailfish OS.
* [https://gitlab.com/pinephone-sailfish-os/linux-kernel/ Linux kernel config repo]
* [https://gitlab.com/sailfishos-porters-ci/dont_be_evil-ci/ Sailfish OS repo]
==== Download ====
'''Flashing script'''
The Sailfish OS image is built on Gitlab CI. The latest image can be installed using the [https://raw.githubusercontent.com/sailfish-on-dontbeevil/flash-it/master/flash-it.sh flashing script].
The script downloads the image and bootloader from the CI, extracts everything and burns it onto the SD card.
Note: The script will format and erase the SD card!
Instructions:
# Download the flashing script
# Download the flashing script
# Insert a microSD card in your device
# Insert a microSD card in your device
# Make the script executable: <code>chmod +x flash-it.sh</code>
# Make the script executable: <code>chmod +x flash-it.sh</code>
# Verify that you have the <code>bsdtar</code> package installed
# Execute it: <code>./flash-it.sh</code>
# Execute it: <code>./flash-it.sh</code>
# Follow the instructions. Some commands in the script require root permissions (for example: mounting and flashing the SD card).
# Follow the instructions. Some commands in the script require root permissions (for example: mounting and flashing the SD card).


''Note'': The script will format and flash the SD card, make sure that you don't have any important data on the SD card!
* When asked where to flash, type 'raw' and it will build the image on your computer. Otherwise define the path /dev/....  to flash to card or internal emmc.
 
'''username/password'''
 
Set PIN on initialization.
 
==== Notes ====
 
* Sometimes the first run stalls before the tutorial. Reboot and it will start from setting the security pin.
* The homescreen may be locked unless you boot with a sim card inserted. An old expired sim will do. '''If you do not have a SIM card on hands, do NOT set a security code on first boot.'''
* When a screen with a loading circle is displayed, just left/right swipe it away.
* If you're not familiar with Sailfish OS, pay attention to the tutorial - the interface works great, but is not immediately obvious. If you are familiar with it, you can skip the tutorial by touching all 4 corners starting top left.
 
'''What works, what does not work'''
 
See the [https://wiki.merproject.org/wiki/Adaptations/PinePhone64#Hardware_Support Hardware Support section] on the Mer Wiki's PinePhone Page.
 
There is a limited selection of apps available from the Jolla store, the vast majority are hosted on openrepos.net. If the Storeman app for openrepos is not preinstalled, download the RPM and click to install.
 
'''How to contribute and report defects'''
 
See the documentation wiki at [https://github.com/sailfish-on-dontbeevil/documentation/wiki the github project] for help and links.
 
See the [https://wiki.merproject.org/wiki/Adaptations/PinePhone64#Installation Installation section] on the Mer Wiki's PinePhone Page for compile, build and development.
 
Git repo links are at the top of this OS section. other repos that may be helpful:
 
* [https://github.com/sailfish-on-dontbeevil GitHub project page]
* [https://github.com/sailfish-on-dontbeevil/flash-it the repo of the flash-it.sh flashing script]
* [https://build.merproject.org/project/show/nemo:devel:hw:pine:dontbeevil Mer Open Build Service page] ([https://forum.sailfishos.org/t/changes-needed-to-merge-the-project-names-to-sailfish-os/1672 Mer is being assimilated into Sailfish OS] and [https://forum.sailfishos.org/t/obs-shut-down-and-next-steps/1814 OBS is shutting down], also see [https://specs.openstack.org/openstack/fuel-specs/specs/7.0/replace-obs.html OpenStack is replacing OBS with another build system based on Jenkins], if it's related, even OBS come back under Sailfish OS, it will be different.)
 
See the [https://sailfishos.org/wiki/Collaborative_Development#Reporting_issues Sailfish OS wiki] for links to their forum, as well as info required when reporting an issue. See the [https://sailfishos.org/wiki/SailfishOS Sailfish OS wiki main page] for options to contribute to Sailfish OS.
 
'''Notes'''
 
OTA is supported: <code>zypper refresh && zypper update</code> as root (<code>devel-su</code> to get root access). Things that need reflash are bootloader specific at the moment. If improvements like [[Crust]] or changes of partition layout are added, then you need to reflash.
----
 
=== SkiffOS ===
[[File:SkiffOS-Icon-1.png|right|100px]]
 
Minimal in-memory cross-compiled OS optimized for hosting multiple in parallel Docker containers. Provides the reliability of firmware with the ease-of-use of package managers.
 
==== Download ====
 
The repository and instructions can be found [https://github.com/skiffos/SkiffOS/tree/master/configs/pine64/phone here].
 
==== Notes ====
 
Upgrade over-the-air via a simple rsync script, or copying 3 files.
 
Uses the [http://buildroot.org Buildroot] cross-compilation tool for support for all Pine64 boards.
 
Use configuration packages to configure distro:
 
{| class="wikitable"
! Package
! Distro
|-
| core/pinephone_neon   
| KDE Neon via Ubuntu repositories
|-
| core/pinephone_nixos 
| Nixos Mobile
|-
| core/pinephone_gentoo 
| Gentoo with Link-time Optimization & KDE Mobile or Phosh
|-
| core/pinephone_ubports
| Ubuntu Ports for PinePhone
|-
| core/pinephone_manjaro_kde 
| Manjaro for PinePhone: KDE variant
|-
| core/pinephone_manjaro_phosh
| Manjaro for PinePhone: Phosh variant
|-
| core/pinephone_manjaro_lomiri
| Manjaro for PinePhone: Lomiri variant
|}
 
The boot-up OS is upgraded independently from the containers.
 
----
 
=== Slackware ===
 
[https://arm.slackware.com/ Slackware] is the world's oldest actively developed Linux distribution, providing a modern user land (applications) and Linux Kernel, within a more classic Unix Operating System environment.
 
==== Download ====
 
* http://dl.fail.pp.ua/slackware/images/pinephone/
 
==== Notes ====
 
Discussion: [https://forum.pine64.org/showthread.php?tid=12181&highlight=slackware+pinephone Thread]
 
----
 
=== Ubuntu Touch ===
[[File:Ubports-logo.png|right|100px]]
 
A Mobile Version of the Ubuntu Operating System made and maintained by the UBports Community. The port is currently maintained by Oren Klopfer (oklopfer).
 
Tow-Boot is required for installing the latest version of Ubuntu Touch (20.04) on the PinePhone. Instructions for installing Tow-Boot to the PinePhone can be found [https://tow-boot.org/devices/pine64-pinephoneA64.html here].
 
Installation instructions can be found at
[https://ubports.com/en/blog/ubports-news-1/post/pinephone-and-pinephone-pro-3889 this UBports post]. After Tow-Boot has been installed to your device, Ubuntu Touch installation just requires flashing the <code>.img.xz</code> to an SD or the eMMC.
 
==== Download ====
 
[https://gitlab.com/ook37/pinephone-pro-debos/-/releases UBports 20.04 PinePhone Latest Releases]
 
[https://devices.ubuntu-touch.io/device/pinephone/release/focal UBports PinePhone Device Info]
 
{| class="wikitable"
!colspan="2" style="background: #a7d7f9;"| Default credentials
|-
! Default user
| Set during boot
|-
! root
| <code>phablet/1234</code>
|}
 
==== Notes ====


* ''' user-id/password '''
Scroll down to the middle of [https://gitlab.com/ook37/pinephone-pro-debos/ the GitLab project page], or directly here [https://devices.ubuntu-touch.io/device/pinephone/release/focal/#deviceOverview at the UBports website] to see which features work.


* ''' What works, what does not work '''
Contributions and bug reports can be made at the [https://gitlab.com/ook37/pinephone-pro-debos/ UBports PinePhone GitLab page]. See [https://ubports.com/foundation/sponsors UBports website] for how to donate.


* ''' Where/how to report defects '''
== Further Releases ==


See [https://sailfishos.org/wiki/Collaborative_Development#Reporting_issues the Sailfish wiki] for links to their forum as well as info required when reporting an issue.
=== Apache NuttX RTOS ===


* ''' Contributions '''
[https://nuttx.apache.org/docs/latest Apache NuttX RTOS] is a Real-Time Operating System that supports PinePhone
[https://sailfishos.org/wiki/SailfishOS See the SailfishOS wiki for options to contribute.]


<div class="center" style="background-color: lightyellow;">[[#top | '''Return to top of page''']]</div>
* [https://nuttx.apache.org/docs/latest/platforms/arm/a64/boards/pinephone/index.html Apache NuttX RTOS on PINE64 PinePhone]


== Maemo Leste ==
=== Sculpt Operating System (Genode OS Framework) ===
http://files.pine64.org/sw/pine64_installer/json/maemo_leste.png


* ''' Download location '''
[https://genode.org/news/sculpt-os-release-23.04 Sculpt OS since version 23.04] supports PinePhone.
[http://maedevu.maemo.org/images/ Maemo Leste test builds download awaited.] Note dont-be-evil images will not work on Braveheart due to hardware differences.
Ready-to-use system image available on the [https://genode.org/download/sculpt download page].


* ''' user-id/password '''
== Tools ==
root/toor


* ''' What works, what does not work '''
There are software tools, that can be booted on the PinePhone.


* ''' Where/how to report defects '''
=== JumpDrive ===


* ''' Contributions '''
JumpDrive can be used to flash the eMMC (and the microSD card), see [[PinePhone Installation Instructions#Using JumpDrive]].


<div class="center" style="background-color: lightyellow;">[[#top | '''Return to top of page''']]</div>
See https://github.com/dreemurrs-embedded/Jumpdrive/releases for the latest image.
Make sure to download the "PinePhone" image and to unpack the archive before flashing.


== NixOS ==
----
http://files.pine64.org/sw/pine64_installer/json/nixos.png


* ''' Download location '''
=== Tow-Boot ===


* ''' user-id/password '''
Tow-Boot is a more user-friendly distribution of U-Boot. Can also mount internal storage as USB Mass Storage by holding the volume up button at startup before and during the second vibration and the LED will turn blue if done successfully.


* ''' What works, what does not work '''
See https://github.com/Tow-Boot/Tow-Boot/releases for the latest image.
Make sure to download the image with pinephoneA64 in the name.


* ''' Where/how to report defects '''
== Hardware test build ==
See [https://nixos.org/nixos/community.html Bugs section on this page.]


* ''' Contributions '''
{{Warning|The factorytest image for hardware testing appears to be no longer maintained.}}
[https://nixos.org/nixos/community.html Details about contributions and donations are on the NixOS website.]


<div class="center" style="background-color: lightyellow;">[[#top | '''Return to top of page''']]</div>
On the Braveheart model, there was a postmarketOS based basic Factory Test OS pre-installed on the eMMC. The developer Martijn Braam from postmarketOS has improved the functionality of the image considerably later. Since the 20200501 version, it is able to test all the hardware. It also includes functionality to install a new OS to the eMMC when using with an test image that includes that OS image. The downloadable image just does the hardware tests. Do not flash eMMC to test your device, just flash it to microSD and test from there. New versions are distributed as part of the postmarketOS distribution.


== LuneOS ==
{{Info|The magnetometer test will fail on the new Beta Edition, as the factory image wasn't updated for it yet.}}
http://files.pine64.org/sw/pine64_installer/json/luneos.jpg


* ''' Download location '''
Links:
[http://build.webos-ports.org/luneos-testing/images/pinephone/ LuneOS test image for PinePhone]
Tofe recommends using bmaptool ; for example "bmaptool copy http://build.webos-ports.org/luneos-testing/images/pinephone/luneos-dev-image-pinephone-testing-0-15.rootfs.wic.gz /dev/mmcblk0"


* ''' user-id/password '''
* [https://images.postmarketos.org/pinephone/ Software Images] ('''NOTE:''' Link is is broken) (download the latest one named like pine-pinephone-yyyyMMdd-factorytestX.img.xz)
* [https://gitlab.com/MartijnBraam/factorytest Git repo]
* [https://gitlab.com/MartijnBraam/factorytest/-/blob/master/README.rst Documentation]


* ''' What works, what does not work '''
== Historic factory builds ==


* ''' Where/how to report defects '''
These are different operating system builds that was preloaded in the factory with testing utility.


* ''' Contributions '''
Download the build, extract the image and dd it to a 8 GB or larger microSD card, then insert it into the PinePhone.
After power up or reboot, you may perform and complete the test routine, or apply the build from microSD card to eMMC.


<div class="center" style="background-color: lightyellow;">[[#top | '''Return to top of page''']]</div>
All the download links below are direct download from pine64.org.


== Nemo Mobile ==
{{Warning|These images are for testing purposes only. If you are looking for an up-to-date image please select one from the [[#Software Releases|software releases]] section instead.}}
http://files.pine64.org/sw/pine64_installer/json/nemo_mobile.png
Nemo Mobile is the open source build of Sailfish OS.


* ''' Download location '''
<div style="overflow: auto;">
DD image for 8GB micoSD card /16GB eMMC module and above: [http://files.pine64.org/os/PinePhone/NemoMobile/nemo-pine64-release2019.11.tar.bz2 Release build 0.3 direct download from pine64.org]
{| class="wikitable" style="white-space: nowrap"
MD5 (XZ file): CA25F72A97CEE57C1479B90F445F4A4B
! Distribution
size: 325MB
! Download Link
! File Size
! MD5
|-
| Beta Edition
| [https://files.pine64.org/os/PinePhone/BetaEdition/pine64-pinephone-plamo-beta-factorytest.img.xz pine64-pinephone-plamo-beta-factorytest.img.xz]
| 1.78GB
| <code>f16bce93504a52217540ac886863a418</code>
|-
| Mobian
| [https://files.pine64.org/os/PinePhone/Mobian/pine64-pinephone-20201207-factorytest-mobian.img.xz pine64-pinephone-20201207-factorytest-mobian.img.xz]
| 1.41GB
| <code>015be381ff4e650a7fca6d4eaa90d63d</code>
|-
| KDE
| [https://files.pine64.org/os/PinePhone/KDE/pine64-pinephone-20201208-factorytest-kde.img.xz pine64-pinephone-20201208-factorytest-kde.img.xz]
| 2.28GB
| <code>32979ff17b5ec4d358ce99f1aff0c77c</code>
|-
| Manjaro
| [https://files.pine64.org/os/PinePhone/Manjaro/pine64-pinephone-20201013-manjaro-stable-20201018-factory56.img.xz pine64-pinephone-20201013-manjaro-stable-20201018-factory56.img.xz]
| 1.04GB
| <code>4edfd4dceaefdd32a3417c1727161c29</code>
|-
| postmarketOS
| [https://files.pine64.org/os/PinePhone/PostMarketOS/pine64-pinephone-20200726-phosh-v20.05-factory.img.xz pine64-pinephone-20200726-phosh-v20.05-factory.img.xz]
| 517MB
| <code>244093be2f6d728fcbd1d29114607727</code>
|-
| Ubuntu Touch
| [https://files.pine64.org/os/PinePhone/UBPorts/PinePhone-flasher-ubuntu-7b.img.gz PinePhone-flasher-ubuntu-7b.img.gz]
| 1.05GB
| <code>2d7f5271e7a281db8f1b1219bedbe131</code>
|}
</div>


* ''' user-id/password '''
== Installing other ARM64 distributions ==


* ''' What works, what does not work '''
Other ARM64 distributions might be installed as well, however this requires some tinkering and may not work well.


* ''' Where/how to report defects '''
{{Info|Distributions not on this page may not even boot after you follow this section. In the best case, they will be barely usable.
For more info please visit [https://github.com/neochapay/nemo-device-dont_be_evil neochapay's github page]
This is more for fun, or if you would like to port a new distribution to the PinePhone.}}


* ''' Contributions '''
General steps:


<div class="center" style="background-color: lightyellow;">[[#top | '''Return to top of page''']]</div>
# Create a boot partition (from 4 MB to about 252 MB) and a root partition (from the end of boot to the end of the card) filesystem on the SD card.
# Format the boot partition with vfat, and the root partition with a supported filesystem like ext4 or f2fs.
# Extract the root filesystem from your distribution's ARM image into the root filesystem on the SD card. Do not copy the partition, copy the files instead (in archive mode, like <code>rsync -ar</code>).
# Edit <code>/etc/fstab</code> to match your partitions.
# Grab megi's kernel from https://xff.cz/kernels/, Follow the instructions in the [https://xff.cz/kernels/README README], which involves copying the kernel modules into the SD card rootfs, and writing u-boot and the bootloader.


If you would like to see examples or specific commands for how to complete these steps, see:
* [https://github.com/nikhiljha/pp-fedora-sdsetup    an example for Fedora], current unofficial [#Fedora] release
* [https://xnux.eu/howtos/install-arch-linux-arm.html an example for Arch Linux] by megi
== Other Resources ==


= Other Resources =
Community
Community
* [https://forum.pine64.org/forumdisplay.php?fid=120 PinePhone Forum]
 
* [http://www.pine64.xyz:9090/?channels=PINEPHONE PinePhone IRC Channel]
* [[Main_Page#Community_and_Support|Links to the community services]]


Hardware information
Hardware information
* [[PinePhone]] hardware details in this Pine64 wiki.
 
* The postmarketOS wiki has a detailed page on the PinePhone hardware [https://wiki.postmarketos.org/wiki/PINE64_PinePhone_(pine64-pinephone) here,] and the preceeding devkit [https://wiki.postmarketos.org/wiki/PINE64_Don%27t_be_evil_devkit_(pine64-dontbeevil) here.]
* [[PinePhone|General PinePhone hardware info]] in this Pine64 wiki
* Details specific to the Braveheart Edition: [[PinePhone v1.1 - Braveheart|PinePhone 1.1 Braveheart hardware details]]
* Details specific to the Community Edition: [[PinePhone v1.2|PinePhone 1.2 hardware details]]
* The postmarketOS wiki has a detailed page on the PinePhone hardware [https://wiki.postmarketos.org/wiki/PINE64_PinePhone_(pine64-pinephone) here] and the preceding devkit [https://wiki.postmarketos.org/wiki/PINE64_Don%27t_be_evil_devkit_(pine64-dontbeevil) here]


Other software information
Other software information
* [https://linux-sunxi.org/Main_Page sunxi community wiki]
* [https://linux-sunxi.org/Main_Page sunxi community wiki]
* [https://xnux.eu/devices/pine64-pinephone.html megi's feature/driver support matrix]
* [https://megous.com/dl/tmp/README.bootui megi bootUI notes (for dualbooting/multibooting)] see demonstration [https://www.youtube.com/watch?v=ZL1GREqoqx8 on YouTube]
* [https://github.com/ayufan-pine64/boot-tools ayufan boot tools]
* [https://github.com/ayufan-pine64/boot-tools ayufan boot tools]


Other
Other
* [https://store.pine64.org/?post_type=product Pine64 shop]
 
* [https://pine64.com/?post_type=product Pine64 shop]
* [https://www.pine64.org/2020/01/24/setting-the-record-straight-pinephone-misconceptions/ Pine64 blog on blobs]
* [https://tuxphones.com/yet-another-librem-5-and-pinephone-linux-smartphone-comparison/ Martijn Braam Librem 5 comparison, especially covering openness/blobs]
* [https://tuxphones.com/yet-another-librem-5-and-pinephone-linux-smartphone-comparison/ Martijn Braam Librem 5 comparison, especially covering openness/blobs]
* [https://fam-ribbers.com/2019/12/28/State-of-Linux-on-mobile-and-common-misconceptions.html Bart Ribbers blog on linux distributions and desktop environments on mobile devices.]
* [https://fam-ribbers.com/2019/12/28/State-of-Linux-on-mobile-and-common-misconceptions.html Bart Ribbers blog on Linux distributions and desktop environments on mobile devices]
* [https://www.jeffgeerling.com/blog/2019/a2-class-microsd-cards-offer-no-better-performance-raspberry-pi Jeff Geerling on micro SD cards.]
* [https://www.jeffgeerling.com/blog/2019/a2-class-microsd-cards-offer-no-better-performance-raspberry-pi Jeff Geerling on testing microSD cards]
 


<div class="center" style="background-color: lightyellow;">[[#top | '''Return to top of page''']]</div>
[[Category:PinePhone]]

Latest revision as of 14:11, 6 October 2024

This page contains a list of all available releases and tools for the PinePhone in alphabetical order.

Note: Some releases may not have a good setup for the backlight at low brightness. If configured too low, the backlight shuts down completely, but the screen is still displayed and usable in bright front-light.

See PinePhone Installation Instructions on how to install the operating systems. Please see PinePhone Updating Instructions for how to update the phone.

Software Releases

Arch Linux ARM

Archlinux-logo.png

(Unofficial) Arch Linux ARM with choice of Phosh UI, Plasma Mobile, sxmo or barebones. It is maintained by the DanctNIX community (GitHub: danctnix, dreemurrs-embedded).

Download

Get both stable and test builds at GitHub releases.

Default credentials
Default user alarm/123456
root (barebone only) root/root

Notes


ExpidusOS

A fork of Void Linux with a custom fork of XFCE called Gensis as the default desktop environment, developed by Midstall Software.

Download

Check the download page for that latest version, or the image file list for all versions, look for the filename that starts with "pinephone".

Default credentials
Default user expidus/expidus

Notes

What works, what does not work:

How to contribute and report defects:


Fedora

Fedora1.png

An (unofficial) vanilla Fedora rawhide build for aarch64 with megi's kernel and some additional packages to tie it all together. It aims to eventually be an upstream part of the Fedora project, rather than a phone-specific distribution.

Download

There is also an FTP server with images build every night @ ftp://pine.warpspeed.dk/nightly/pinephone/ (Mount this with something like Nautilus)

Default credentials
Nightly images (via FTP) pine/1111

Notes

WiFi, Bluetooth, SMS, Data, Calls all work! There are still a few bugs though, and some features don't have driver support yet on any PinePhone distribution.

Please send your bug reports to the project's issue tracker. Be sure to include logs if applicable! Send us pull requests on [2].


Gentoo

GentooLogo.png

There are unofficial Gentoo overlays with ebuilds for the PinePhone. There are no images - the image must be built manually, including picking the kernel, bootloader and the desired desktop environment. The ARM64 version of Gentoo has to be selected.

Download

Overlay locations:

Notes

The documentation can be found here:

Note: Please consider cross-compiling the software on the computer. Long compilation times and heat production can lead to a reduced lifespan of the phone.

GloDroid

A fully open-source port of Android and LineageOS to the PinePhone.

GitHub: GloDroid

Download

Notes

Feature overview:

  • Works: WiFi, screen dimming, sound, touchscreen, charging and telephony(partially) works.
  • Doesn't work: Bluetooth and GPS
  • See more at project status page

Kali Linux

Kali-logo.png

The official Kali Nethunter images for PinePhone and PinePhone Pro have been released now. For older/unofficial releases, you can still download from the GitHub releases page. Get Nethunter App for your PinePhone's Kali Linux. Packet Injection is working now, use iwconfig instead of airmon-ng.

Download

Warning: There are reports that the official Kali images fail to boot.
Default credentials
Default user for Unofficial Releases kali/8888
Default user for Nethunter Releases kali/1234

Notes

For the installation see the installation instructions under PinePhone Installation Instructions


LuneOS

Luneos-logo-256.png

LuneOS is one of the original multi-tasking OS-es that runs on Linux. Based on HP/Palm's webOS, merged with latest technology stack from LG called webOS OSE (a derivative of what LG uses on their Smart TV's), software such as Qt5 and makes use of the Yocto build system.

Download

Default credentials
Default user root

Notes

In order to connect to the device using SSH/SCP via WiFi: You can simply connect via SSH/SCP via WiFi using the PinePhone's IP address on port 22.


Maemo Leste

Maemoleste-logo.png

Maemo is a trimmed-down version of Debian for mobile devices, originally a collaboration between Nokia and many open source projects (the Maemo community) before Nokia abandoned it. The more well-known devices Maemo supports are the OpenMoko and N900. The community now takes full responsibility in developing fully open source Maemo for a variety of mobile devices. You may be interested to learn more about the features in their Maemo Leste FAQ.

Maemo 8 "Leste" is an ARM64 port of Devuan (Debian without systemd) and runs the mainline Linux kernel. The default user interface stack is Hildon, Xorg, Matchbox WM, and GTK.

Download

There is also an image builder, see the wiki for instructions on how to build a custom image. For current status and instructions, please read their PinePhone wiki page.

Default credentials
root toor
user 12345 (lockscreen)

Notes

Most discussion occurs at #maemo-leste on irc.libera.chat and this thread.

All other contact information is listed on the main page of the Maemo wiki.

Submit bug reports on github. To track known issues, you may use these search terms: pinephone, pine64.


Manjaro ARM

Manjaro-logo.svg

Manjaro is a user-friendly Linux distribution based on the independently developed Arch operating system with the Plasma Mobile and Phosh desktop environment.

Download

Default credentials (Only Phosh)
Default user manjaro/123456
root root/root

Notes

The installation of the stable images is strongly suggested. The dev images might break frequently.


Mobian

Debian-logo.png

An unofficial Debian build for ARM64 running with Phosh. The base Debian systems available are an old version of Debian stable (Bookworm 12.0 since June 2023), and Debian testing (Trixie since June 2023). The testing version has many more features and bug fixes than the stable version, but new bugs are more likely; the stable version should be upgraded to the most recent stable release after installing. See the installation instructions on the Debian wiki. If you have questions about Mobian, please ask them in the Mobian Matrix room.

Download

  • Images (top directory: Debian/stable; "weekly" directory: Debian/testing)
Note: Tow-Boot is required to be able to boot the images!
Default credentials
Default user mobian/1234

Notes

  • Development is active. See the Mobian wiki.
  • In order to connect to the device using SSH/SCP via WiFi, you need to install SSH on the device. You can do this by executing the following in a shell: "sudo apt-get install ssh", afterwards you can connect via SSH/SCP via WiFi using the PinePhone's IP address on port 22.

Multi-distro demo image

Warning: This is a demo image for testing different operating systems before installing a regular image. Attempting to use this image productively is highly discouraged. The kernel is shared across the different operating systems and is not updated.

This image allow users to try many Linux distributions easily, without having to figure out how to flash them individually and juggle with many microSD cards. Also called megi's 15-in-1 multi boot image.

Download

Update 2022-01-26, using megi's kernel 5.16.2

DD image to SD card and boot. This image is for 16GiB or larger SD cards, also works if flashed to eMMC.

This is also a good build for charging depleted battery. Just boot up this build with power supply connected, keep the PinePhone charging for 3 hours at power down stage.

For more info on this build, please visit its entry the "News" section of its web page.

Due to its size, download though torrent is suggested by the author on its main page.

Default credentials
General 1111
sxmo user/1111
Manjaro seems to insist on 123456

Notes

Note: Note about zstd) archive file (.zst):

On Linux, you may install or compile zstd, then write the image to SD card by piping zstdcat and dd. See the "Installation" section of its web page for command examples.

On Windows, instead of the offical zstd command line program, you may use 7-zip-zstd. Different installation method is provided in their README. Install 7-Zip-zstd / zstd, extract the disk image file (.img) from the zstd archive, and flash with tools like Win32 Disk Imager.

Also see PinePhone Installation Instructions.


Nemo Mobile

Nemo mobile.png

Nemo Mobile is the open source build of Sailfish OS with a open source UI called Glacier, based on Manjaro.

Download

Image

Default credentials
Default user manjaro/123456
root root/root

Notes

The website of the Nemo Mobile UX Team can be found here. Please report bugs regarding the Nemo Mobile UI as GitHub issue.


NixOS

NixOS.webp

NixOS is a Linux distribution built on top of the Nix package manager using declarative configuration to allow reliable system upgrades.

Download

There is a guided installer by the Mobile NixOS project available. An installer image that can be flashed to a sdcard can be downloaded from the Hydra build instance.

Users that want to build a local image, are expected to follow the instructions in the Getting Started page, and Project's device page.

Notes

Project home page: Mobile NixOS


OpenMandriva Lx

Oma-logo-22042013 300pp.png

OpenMandriva Lx with Plasma Mobile as UI.

Download

The official image can be found at sourceforge.net. See here for the offical announcement.

Notes

Note: This image is solely for testing purposes.

openSUSE

SLEM-OS-logo.png

Our images use the same openSUSE Tumbleweed base as our desktop images, except what needs to be changed for the PinePhone. The images include zypper (RPM) as the default package manager, and have access to virtually the same (open source) software as our desktop repositories, thanks to the Factory ports. Using dnf is possible, if preferred.

Download

To verify the images you need to import our GPG key. Keep on mind that the first boot may stay on black screen for about a minute - consequent boots should be faster.

You can find install instructions at this section in the openSUSE Wiki.

Default credentials
Default user pine/1234
root root/linux

Notes

You can find all information about the releases of the project here. Detailed information, tips and troubleshooting suggestions are also provided at the openSUSE Wiki. You will also find information in our wiki on how to report issues (Contributing section).


postmarketOS

PostmarketOS logo.png

postmarketOS extends Alpine Linux to run on smartphones and other mobile devices. It offers various user interfaces (Phosh, Plasma Mobile, Sxmo, Plasma Desktop, Gnome 3, Kodi, XFCE4, ...).

Download

Download page

Default credentials
Test images user user/147147

Notes

As of writing, official images are provided with Phosh, Plasma Mobile and Sxmo. The official images come in two flavors, either as a test image to try out postmarketOS, or with the installer.

When using the installer images (recommended), it is possible to:

  • encrypt the installation
  • install from the SD card to eMMC

Power users may also create their own image with the distribution's install and development tool pmbootstrap.

See the pine64-pinephone page of the postmarketOS wiki for details.


Rhino Linux

Rhino-linux-logo.png

Rhino Linux is an Ubuntu-based distribution that uses the rolling-release model by tracking the devel branch of repositories. The port is currently maintained by Oren Klopfer (oklopfer).

Tow-Boot is required for installing Rhino Linux. Instructions for installing Tow-Boot to the PinePhone can be found here. After Tow-Boot has been installed to your device, Rhino Linux installation just requires flashing the .img.xz to an SD or the eMMC.

Download

Rhino Linux Downloads (select Pine64 on the dropdown)

Default credentials
Default user rhino/1234

Notes

Foundational to the distribution is Pacstall, a Debian-based user repository inspired by the AUR. Additionally, RL comes with Unicorn, a custom modified version of XFCE with various modernizations and improvements, including auto-rotation for mobile devices.

Discord - Matrix - GitHub - Wiki


Sailfish OS

SailfishOS logo.png

Sailfish OS is a Linux-based operating system based on open source projects such as Mer, and a closed source UI based on Lipstick.

Download

Flashing script

The Sailfish OS image is built on Gitlab CI. The latest image can be installed using the flashing script.

The script downloads the image and bootloader from the CI, extracts everything and burns it onto the SD card. Note: The script will format and erase the SD card!

Instructions:

  1. Download the flashing script
  2. Insert a microSD card in your device
  3. Make the script executable: chmod +x flash-it.sh
  4. Verify that you have the bsdtar package installed
  5. Execute it: ./flash-it.sh
  6. Follow the instructions. Some commands in the script require root permissions (for example: mounting and flashing the SD card).
  • When asked where to flash, type 'raw' and it will build the image on your computer. Otherwise define the path /dev/.... to flash to card or internal emmc.

username/password

Set PIN on initialization.

Notes

  • Sometimes the first run stalls before the tutorial. Reboot and it will start from setting the security pin.
  • The homescreen may be locked unless you boot with a sim card inserted. An old expired sim will do. If you do not have a SIM card on hands, do NOT set a security code on first boot.
  • When a screen with a loading circle is displayed, just left/right swipe it away.
  • If you're not familiar with Sailfish OS, pay attention to the tutorial - the interface works great, but is not immediately obvious. If you are familiar with it, you can skip the tutorial by touching all 4 corners starting top left.

What works, what does not work

See the Hardware Support section on the Mer Wiki's PinePhone Page.

There is a limited selection of apps available from the Jolla store, the vast majority are hosted on openrepos.net. If the Storeman app for openrepos is not preinstalled, download the RPM and click to install.

How to contribute and report defects

See the documentation wiki at the github project for help and links.

See the Installation section on the Mer Wiki's PinePhone Page for compile, build and development.

Git repo links are at the top of this OS section. other repos that may be helpful:

See the Sailfish OS wiki for links to their forum, as well as info required when reporting an issue. See the Sailfish OS wiki main page for options to contribute to Sailfish OS.

Notes

OTA is supported: zypper refresh && zypper update as root (devel-su to get root access). Things that need reflash are bootloader specific at the moment. If improvements like Crust or changes of partition layout are added, then you need to reflash.


SkiffOS

SkiffOS-Icon-1.png

Minimal in-memory cross-compiled OS optimized for hosting multiple in parallel Docker containers. Provides the reliability of firmware with the ease-of-use of package managers.

Download

The repository and instructions can be found here.

Notes

Upgrade over-the-air via a simple rsync script, or copying 3 files.

Uses the Buildroot cross-compilation tool for support for all Pine64 boards.

Use configuration packages to configure distro:

Package Distro
core/pinephone_neon KDE Neon via Ubuntu repositories
core/pinephone_nixos Nixos Mobile
core/pinephone_gentoo Gentoo with Link-time Optimization & KDE Mobile or Phosh
core/pinephone_ubports Ubuntu Ports for PinePhone
core/pinephone_manjaro_kde Manjaro for PinePhone: KDE variant
core/pinephone_manjaro_phosh Manjaro for PinePhone: Phosh variant
core/pinephone_manjaro_lomiri Manjaro for PinePhone: Lomiri variant

The boot-up OS is upgraded independently from the containers.


Slackware

Slackware is the world's oldest actively developed Linux distribution, providing a modern user land (applications) and Linux Kernel, within a more classic Unix Operating System environment.

Download

Notes

Discussion: Thread


Ubuntu Touch

Ubports-logo.png

A Mobile Version of the Ubuntu Operating System made and maintained by the UBports Community. The port is currently maintained by Oren Klopfer (oklopfer).

Tow-Boot is required for installing the latest version of Ubuntu Touch (20.04) on the PinePhone. Instructions for installing Tow-Boot to the PinePhone can be found here.

Installation instructions can be found at this UBports post. After Tow-Boot has been installed to your device, Ubuntu Touch installation just requires flashing the .img.xz to an SD or the eMMC.

Download

UBports 20.04 PinePhone Latest Releases

UBports PinePhone Device Info

Default credentials
Default user Set during boot
root phablet/1234

Notes

Scroll down to the middle of the GitLab project page, or directly here at the UBports website to see which features work.

Contributions and bug reports can be made at the UBports PinePhone GitLab page. See UBports website for how to donate.

Further Releases

Apache NuttX RTOS

Apache NuttX RTOS is a Real-Time Operating System that supports PinePhone

Sculpt Operating System (Genode OS Framework)

Sculpt OS since version 23.04 supports PinePhone. Ready-to-use system image available on the download page.

Tools

There are software tools, that can be booted on the PinePhone.

JumpDrive

JumpDrive can be used to flash the eMMC (and the microSD card), see PinePhone Installation Instructions#Using JumpDrive.

See https://github.com/dreemurrs-embedded/Jumpdrive/releases for the latest image. Make sure to download the "PinePhone" image and to unpack the archive before flashing.


Tow-Boot

Tow-Boot is a more user-friendly distribution of U-Boot. Can also mount internal storage as USB Mass Storage by holding the volume up button at startup before and during the second vibration and the LED will turn blue if done successfully.

See https://github.com/Tow-Boot/Tow-Boot/releases for the latest image. Make sure to download the image with pinephoneA64 in the name.

Hardware test build

Warning: The factorytest image for hardware testing appears to be no longer maintained.

On the Braveheart model, there was a postmarketOS based basic Factory Test OS pre-installed on the eMMC. The developer Martijn Braam from postmarketOS has improved the functionality of the image considerably later. Since the 20200501 version, it is able to test all the hardware. It also includes functionality to install a new OS to the eMMC when using with an test image that includes that OS image. The downloadable image just does the hardware tests. Do not flash eMMC to test your device, just flash it to microSD and test from there. New versions are distributed as part of the postmarketOS distribution.

Note: The magnetometer test will fail on the new Beta Edition, as the factory image wasn't updated for it yet.

Links:

Historic factory builds

These are different operating system builds that was preloaded in the factory with testing utility.

Download the build, extract the image and dd it to a 8 GB or larger microSD card, then insert it into the PinePhone. After power up or reboot, you may perform and complete the test routine, or apply the build from microSD card to eMMC.

All the download links below are direct download from pine64.org.

Warning: These images are for testing purposes only. If you are looking for an up-to-date image please select one from the software releases section instead.
Distribution Download Link File Size MD5
Beta Edition pine64-pinephone-plamo-beta-factorytest.img.xz 1.78GB f16bce93504a52217540ac886863a418
Mobian pine64-pinephone-20201207-factorytest-mobian.img.xz 1.41GB 015be381ff4e650a7fca6d4eaa90d63d
KDE pine64-pinephone-20201208-factorytest-kde.img.xz 2.28GB 32979ff17b5ec4d358ce99f1aff0c77c
Manjaro pine64-pinephone-20201013-manjaro-stable-20201018-factory56.img.xz 1.04GB 4edfd4dceaefdd32a3417c1727161c29
postmarketOS pine64-pinephone-20200726-phosh-v20.05-factory.img.xz 517MB 244093be2f6d728fcbd1d29114607727
Ubuntu Touch PinePhone-flasher-ubuntu-7b.img.gz 1.05GB 2d7f5271e7a281db8f1b1219bedbe131

Installing other ARM64 distributions

Other ARM64 distributions might be installed as well, however this requires some tinkering and may not work well.

Note: Distributions not on this page may not even boot after you follow this section. In the best case, they will be barely usable. This is more for fun, or if you would like to port a new distribution to the PinePhone.

General steps:

  1. Create a boot partition (from 4 MB to about 252 MB) and a root partition (from the end of boot to the end of the card) filesystem on the SD card.
  2. Format the boot partition with vfat, and the root partition with a supported filesystem like ext4 or f2fs.
  3. Extract the root filesystem from your distribution's ARM image into the root filesystem on the SD card. Do not copy the partition, copy the files instead (in archive mode, like rsync -ar).
  4. Edit /etc/fstab to match your partitions.
  5. Grab megi's kernel from https://xff.cz/kernels/, Follow the instructions in the README, which involves copying the kernel modules into the SD card rootfs, and writing u-boot and the bootloader.

If you would like to see examples or specific commands for how to complete these steps, see:

Other Resources

Community

Hardware information

Other software information

Other