Difference between revisions of "ROCKPro64"

From PINE64
Jump to navigation Jump to search
 
(332 intermediate revisions by 39 users not shown)
Line 1: Line 1:
== [https://www.pine64.org/rock64 ROCKPro64] ==
[[File:ROCKPro64v21FRONT.jpg|400px|thumb|right|The ROCKPro64]]
[https://www.pine64.org/rock64 ROCKPro64] ROCKPro64 is the most powerful Single Board Computer released by Pine64. Its powered by a Rockchip RK3399 Hexa-Core (dual ARM Cortex A72 and quad ARM Cortex A53) 64-Bit Processor with MALI T-860 Quad-Core GPU. The ROCKPro64 is equipped with 4GB LPDDR4 system memory and 128Mb SPI boot Flash. There is also an optional eMMC module (up to 128GB) and microSD slot for booting. The board is equipped with a PCIe x4 open ended slot, 1x USB 3.0 type C Host with DP 1.2, 1x USB 3.0 type A Host, 2x USB 2.0 Host, Gigabit Ethernet, PI-2 GPIO Bus, MiPi DSI interface, eDP interface, touch Panel interface,  stereo MiPi CSI interface, as well as many other peripheral device interface such as UART, SPI, I2C, for makers to integrate with sensors and other peripherals. Various Operating System (OS) are made available by open source community such Android 7.1, Debian, Arch Linux and many more to come.


[[File:ROCKPro64_sideimg.png]]
The '''ROCKPro64''' is the most powerful single-board computer released by PINE64. It is powered by a Rockchip RK3399 hexa-core (dual ARM Cortex A72 and quad ARM Cortex A53) 64-bit processor with a Mali T-860 quad-core GPU. The key features include a PCI Express (PCIe) x4 open-ended slot, the use of LPDDR4 DRAM, and industry-standard heatsink mounting holes.


The ROCKPro64 is equipped with 2 or 4&nbsp;GB of LPDDR4 system memory, and 128&nbsp;Mb of SPI boot flash. There is also an optional eMMC module (up to 128&nbsp;GB) and microSD slot for booting. The board is equipped with 1x USB 3.0 Type-C host port with DP 1.2, 1x USB 3.0 Type-A host port, 2x USB 2.0 host port, Gigabit Ethernet, PI-2 GPIO bus, MiPi DSI interface, eDP interface, touch panel interface, stereo MiPi CSI interface, as well as many other device interfaces such as UART, SPI, I<sup>2</sup>C, for makers to integrate with sensors and other peripherals. Many different operating systems (OSes) are freely available from the open-source community, such as Linux (Ubuntu, Debian, Arch), BSD and Android.


== Getting Started ==


== ROCKPro64 Software Images ==
The article [[ROCKPro64 Getting Started]] gives important information to get the board up and running.


* OS build Installation Guide and tools:
== Software releases ==
** [http://files.pine64.org/doc/rock64/guide/ROCK64_Installing_Android_To_eMMC.pdf Guide to install stock Android build to eMMC module]
** [http://files.pine64.org/doc/rock64/tools/SD_Firmware_Tool._v1.46.zip Tools to burn Android build into a bootable microSD card]
** [http://files.pine64.org/doc/rock64/tools/AndroidTool_Release_v2.38.zip Tools that allows developer flash image into eMMC's Loader/Parameter/Misc/Kernal/Boot/Recovery/System/Backup partition]
** [http://files.pine64.org/doc/rock64/tools/DriverAssitant_v4.5.zip Windows ADB driver package]
** [[Set MacAddress on ROCK64]]


In the [[ROCKPro64 Software Releases]] page, you will find a complete list of currently supported Operating System images that work with the ROCKPro64, as well as other related software. The Software Release page has links to download the images as well as high level instructions to load each image.


----
Please see the [[Getting started]] page for detailed discussion of what you need (prerequisites) as well as instructions if the high level instructions are insufficient.


=== [[ROCKPro64_Software_Release|ROCKPro64]] ===
== Board Layout ==
[[Image:ROCKPro64v21REAR.jpg|thumb|right|A hi-res picture of v2.1 rear.]]
[[Image:FLIR 20220619 125451 686.jpg|thumb|right|A thermal image of v2.1 front (upside-down).]]


Under [[ROCKPro64_Software_Release|'ROCKPro64 Software and OS Image Download Section']] you will find a complete list of currently supported Operating System images that work with the ROCKPro64 as well as other related software.
The list includes OS images and descriptions of:


[[File:ROCKPro64_annotated.jpg|500px|An annotated ROCKPro64]]


* http://files.pine64.org/sw/pine64_installer/json/debian.png [http://wiki.pine64.org/index.php/ROCKPro64_Software_Release#Debian_Stretch '''Debian (microSD / eMMC Boot)''']
=== Main Chips ===
* RK3399 system-on-chip (1)
* LPDDR4 SDRAM 1 (18)
* LPDDR4 SDRAM 2 (3)
* SPI NOR flash memory (17)
* RK808 power management (near 19)
* RTL8211 ethernet transceiver (near 25)
* ES8316 Sound Codec (on rear of board)
* The heatsink mounting holes around the RK3399 are 59 mm apart


* http://files.pine64.org/sw/pine64_installer/json/penguin.png [http://wiki.pine64.org/index.php/ROCKPro64_Software_Release#Ubuntu_18.04_Bionic_LXDE_Desktop_Image_.5BmicroSD_.2F_eMMC_Boot.5D_.5B0.7.9.5D '''Bionic Desktop LXDE (microSD /eMMC Boot)'''] &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; http://files.pine64.org/sw/pine64_installer/json/penguin.png [http://wiki.pine64.org/index.php/ROCKPro64_Software_Release#Ubuntu_18.04_Bionic_minimal_64bit_Image_.5BmicroSD_.2F_eMMC_Boot.5D_.5B0.7.9.5D '''Bionic Minimal 64bit (microSD /eMMC Boot)''']
=== Switches ===
* http://files.pine64.org/sw/pine64_installer/json/penguin.png [http://wiki.pine64.org/index.php/ROCKPro64_Software_Release#Ubuntu_18.04_Bionic_minimal_32bit_Image_.5BmicroSD_.2F_eMMC_Boot.5D_.5B0.7.9.5D '''Bionic Minimal 32bit (microSD /eMMC Boot)'''] &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; http://files.pine64.org/sw/pine64_installer/json/penguin.png [http://wiki.pine64.org/index.php/ROCKPro64_Software_Release#Ubuntu_18.04_Bionic_Containers_Image_.28DockerCE_.26_Kubernetes.29.5BmicroSD_.2F_eMMC_Boot.5D_.5B0.7.9.5D '''Bionic Minimal Containers (microSD /eMMC Boot)''']


* http://files.pine64.org/sw/pine64_installer/json/omv.png [http://wiki.pine64.org/index.php/ROCKPro64_Software_Release#Stretch_OpenMediaVault_OS_Image_armhf_.5BmicroSD_.2F_eMMC_Boot.5D_.5B0.7.9.5D '''OpenMediaVault 32bit (microSD / eMMC boot)'''] &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; http://files.pine64.org/sw/pine64_installer/json/omv.png [http://wiki.pine64.org/index.php/ROCKPro64_Software_Release#Stretch_OpenMediaVault_OS_Image_arm64_.5BmicroSD_.2F_eMMC_Boot.5D_.5B0.7.9.5D '''OpenMediaVault 64bit (microSD / eMMC boot)''']
The Power button (11, SW3): is the same as on your mobile phone - press and release after about 1 second to power on. Press and hold for about 3 seconds to power off.


The Reset button (10, SW901): performs a reset.


* [{{fullurl:ROCKPro64_Software_Release#LibreElec_Nightly_Build}} http://files.pine64.org/sw/pine64_installer/json/libreelec.png] [[ROCKPro64_Software_Release#LibreElec_Nightly_Build|'''LibreElec (microSD / eMMC Boot)''']]
The Recover button (28, SW900): used to enter maskrom mode.


* http://files.pine64.org/sw/pine64_installer/json/android_7.png [[ROCKPro64_Software_Release#Android 7.1.2|'''Android 7.1.2 Stock Image''']]
=== Connectors, Sockets and Headers ===


== SoC and Memory Specification ==
{| class="wikitable sortable" style="line-height: 1.4;"
|- style="font-size: .9em;"
! Diagram !! Schematic<br>designator !! Silkscreen<br>label !! Number<br>of pins !! Description
|-
| style="text-align: center;" | 2  || U39  || PI-2-bus || style="text-align: center;" | 40 || Pi-2 bus
|-
| style="text-align: center;" | 4  || J8    || +FAN- || style="text-align: center;" | 2 || PWM controlled fan header
|-
| style="text-align: center;" | 5  || J10  || SPDIF || style="text-align: center;" | 3 || SPDIF header
|-
| style="text-align: center;" | 6  || U6    || +RTC- || style="text-align: center;" | 2 || RTC battery backup header
|-
| style="text-align: center;" | 7  || U31  || Wifi-BT || style="text-align: center;" | 16 || SDIO WIFI/BT module-MIMO 2
|-
| style="text-align: center;" | 8  || USB3  ||  || style="text-align: center;" | 9 || USB-3 and USB Type C
|-
| style="text-align: center;" | 9  || USB1  ||  || style="text-align: center;" | 2×4 || Dual USB-2
|-
| style="text-align: center;" | 12 || IR1  || IR || style="text-align: center;" | 3 || infrared receiver socket
|-
| style="text-align: center;" | 13 || J16  || Headphone+mic || style="text-align: center;" | 4 || Headphone + mic 3.5mm jack
|-
| style="text-align: center;" | -  || CON16 || GND PWR RST GND || style="text-align: center;" | 4 || Power & reset, unpopulated<br>header near Headphone jack
|-
| style="text-align: center;" | 14 || U29  || EMMC || style="text-align: center;" | 34 || eMMC connector<br />(Note: Some datasheets indicate a low<br />supported number of mating cycles.)
|-
| style="text-align: center;" | 14* || J13  ||  || style="text-align: center;" | 13 || TF-card, a.k.a. microSD<br>(* under 14 on the bottom side)
|-
| style="text-align: center;" | 15 || U30  ||  || style="text-align: center;" | 14 || SDIO WIFI/BT module-MIMO 1
|-
| style="text-align: center;" | 16 || SW4  ||  || style="text-align: center;" | 2 || Jumper to [[#Disable eMMC]]
|-
| style="text-align: center;" | 19 || J15  || PCI || style="text-align: center;" | 64 || PCI-express X4 socket
|-
| style="text-align: center;" | 20 || J21  || DSI || style="text-align: center;" | 30 || DSI
|-
| style="text-align: center;" | 21 || J22  || EDP || style="text-align: center;" | 30 || LCD EDP
|-
| style="text-align: center;" | 22 || CON1  || TP || style="text-align: center;" | 6 || touch panel connector
|-
| style="text-align: center;" | 23 || CON15 ||  || style="text-align: center;" | 4 || DC out for SATA disk cable<br>(direct connect from DC-IN)
|-
| style="text-align: center;" | 24 || J11  || DC-IN || style="text-align: center;" | 2 || Power input, positive tip;<br>12V/3A (minimum) recommended
|-
| style="text-align: center;" | 25 || U32  ||  || style="text-align: center;" | 8 || 8P8C (often referred to as 'RJ45')
|-
| style="text-align: center;" | 26 || J14  ||  || style="text-align: center;" | 19 || HDMI
|-
| style="text-align: center;" | 27 || J17  || MIPI CAM || style="text-align: center;" | 32 || MIPI-1
|-
| style="text-align: center;" | 29 || J19  || MIPI CAM || style="text-align: center;" | 32 || MIPI-2
|-
| style="text-align: center;" | 30 || J18  || CIF || style="text-align: center;" | 26 || CIF
|}
 
=== LEDs ===
 
A green LED next to the 12V input barrel connector will light as long as there is 12V applied to the connector. (Even if the RockPro64 is powered off.)
 
A white LED behind the reset button will light as long as the RockPro64 is running (it comes on a few seconds after power on, when control is passed to the operating system.)
 
A red LED behind the reset button is DIY - it is lit for example if the board is in OTG mode with an Ayufan image, or if an Android image is in standby mode.
 
Yellow and green LEDs on the LAN socket behave in a standard way.
 
=== Jumpers ===
They are used for boot device selection, as described in the following section.
 
==== Disable eMMC ====
 
There is an unlabelled (on the PCB silk-screen) 2-pin jumper (16) between the eMMC socket (14) and the SPI chip (17). It is designated as SW4 on the [[#Board Information, Schematics and Certifications | schematic diagram]]. The default condition is OPEN (no jumper). It is useful for controlling the boot as follows:
 
Default boot device (with no SPI software) is eMMC, then SDcard. If both the eMMC and the SDcard contain bootable images then the eMMC can be disabled by installing the jumper. This completely removes the eMMC from the resulting OS. If you wish the eMMC to be visible in the booted OS the jumper should be removed 2 seconds after applying power (and before the white LED comes on).
 
The possible combinations are summarised in the table below.
 
* 1 = present
* 0 = not present
 
{| class="wikitable sortable" style="text-align: center;"
! µSD !! eMMC !! SW4 !! boot from
|-
| 0 || 0 || 0 || unsupported
|-
| 0 || 0 || 1 || unsupported
|-
| 0 || 1 || 0 || eMMC
|-
| 0 || 1 || 1 || unsupported
|-
| 1 || 0 || 0 || SDCard
|-
| 1 || 0 || 1 || SDCard
|-
| 1 || 1 || 0 || eMMC
|-
| 1 || 1 || 1 || SDCard
|}
 
==== Disable SPI (while booting) ====
There is a second possibility to jumper your ROCKPro64: If you mess-up your SPI and are unable to boot, jumpering pins 23 (CLK) and 25 pin (GND) on the PI-2-bus header will disable the SPI as a boot device. (This was taken from the IRC logs, 09 August 2018 @ 17:23) You have to remove the jumper 2 seconds after having started your RP64 (before the white LED turns ON) otherwise the SPI will be missing and you won't be able to flash it.
Ayufan images contain (at the moment) only one script for the SPI and the RP64, it's "rockpro64_reset_spi_flash". Other SPI scripts are dedicated to the R64 (as it is written on the name) and it will mess-up your RP64 SPI if you use them.
 
== Hardware Compatibility ==
 
The hardware compatibility list can be found under [[ROCKPro64 Hardware compatibility]].
 
== Board Features ==
 
This section outlines the most important characteristics of the board and its components.
 
=== SoC and Memory Specification ===
* Based on Rockchip RK3399
* Based on Rockchip RK3399
[[File:Rockchip_RK3399.png]]
[[File:Rockchip_RK3399.png|right]]
 
==== CPU Architecture ====


=== CPU Architecture ===
* [https://developer.arm.com/products/processors/cortex-a/cortex-a72 Dual-core Cortex-A72 up to 2.0GHz CPU]
* [https://developer.arm.com/products/processors/cortex-a/cortex-a72 Dual-core Cortex-A72 up to 2.0GHz CPU]
* [https://developer.arm.com/products/processors/cortex-a/cortex-a53 Quad-core Cortex-A53 up to 1.5GHz CPU]
* [https://developer.arm.com/products/processors/cortex-a/cortex-a53 Quad-core Cortex-A53 up to 1.5GHz CPU]
* Big.Little architecture: Dual Cortex-A72 + Quad Cortex-A53, 64-bit CPU
* big.LITTLE architecture: Dual Cortex-A72 + Quad Cortex-A53, 64-bit CPU
* Cortex-A72:
* Cortex-A72:
** 1-4x Symmetrical Multiprocessing (SMP) within a single processor cluster, and multiple coherent SMP processor clusters through AMBA 5 CHI or AMBA 4 ACE technology
** 1-4x Symmetrical Multiprocessing (SMP) within a single processor cluster, and multiple coherent SMP processor clusters through AMBA 5 CHI or AMBA 4 ACE technology
Line 52: Line 170:
** VFPv4 floating point
** VFPv4 floating point
** Hardware virtualization support
** Hardware virtualization support
* Cortex A53:
* Cortex-A53:
** L1 cache 32KB Icache and 32KB Dcache for each A53
** L1 cache 32KB Icache and 32KB Dcache for each A53
** L2 cache 512KB for little cluster  
** L2 cache 512KB for little cluster  
Line 64: Line 182:
* One isolated voltage domain to support DVFS
* One isolated voltage domain to support DVFS


=== GPU Architecture ===
==== GPU Architecture ====
 
* [https://developer.arm.com/products/graphics-and-multimedia/mali-gpus/mali-t860-and-mali-t880-gpus ARM Mali-T860MP4 Quad-core GPU]
* [https://developer.arm.com/products/graphics-and-multimedia/mali-gpus/mali-t860-and-mali-t880-gpus ARM Mali-T860MP4 Quad-core GPU]
* The highest performance GPUs built on Arm Mali’s famous Midgard architecture, the Mali-T860 GPU is designed for complex graphics use cases and provide stunning visuals for UHD content.
* The highest performance GPUs built on Arm Mali’s famous Midgard architecture, the Mali-T860 GPU is designed for complex graphics use cases and provides stunning visuals for UHD content.
* Frequency 650MHz  
* Frequency: 650MHz  
* Throughput 1300Mtri/s, 10.4Gpix/s  
* Throughput: 1300Mtri/s, 10.4Gpix/s  
* OpenGL® ES 1.1, 1.2, 2.0, 3.1, 3.2., Vulkan 1.0*., OpenCL™ 1.1, 1.2., DirectX® 11 FL11_1., RenderScript™.
* OpenGL® ES 1.1, 1.2, 2.0, 3.1, 3.2, Vulkan 1.0*, OpenCL™ 1.1, 1.2, DirectX® 11 FL11_1, RenderScript™.


=== System Memory ===
==== System Memory ====
* LPDDR4 RAM Memory Variants: Dual Channels 2GB and 4GB.
* LPDDR4 RAM Memory Variants: Dual Channels 2GB and 4GB.
* Storage Memory: ROCK64 boards have 128Mb built-in SPI Flash memory but not yet in use, currently use '''bootable microSD Cards''' or '''bootable attachable eMMC'''.
* Storage Memory: 128Mb built-in SPI Flash memory (as at August 2018 only support for USB boot).


=== Display ===


 
* Dual VOP: one supports resolutions up to 4096x2160 and [https://www.arm.com/why-arm/technologies/graphics-technologies/arm-frame-buffer-compression AFBC]; the other supports resolutions up to 2560x1600
== Board Features ==
 
=== Display ===
* Dual VOP: one supports 4096x2160 with AFBC supported；The other supports 2560x1600
* Dual channel MIPI-DSI (4 lanes per channel)
* Dual channel MIPI-DSI (4 lanes per channel)
* eDP 1.3 (4 lanes with 10.8Gbps) to support display, with PSR
* eDP 1.3 (4 lanes with 10.8Gbps) to support displays, with PSR
* HDMI 2.0 for 4K 60Hz with HDCP 1.4/2.2
* Digital Video port up to 4Kp60
* DisplayPort 1.2 (4 lanes, up to 4K 60Hz)
* DisplayPort 1.2 (4 lanes, up to 4K 60Hz)
* Supports Rec.2020 and conversion to Rec.709  
* Supports Rec.2020 and conversion to Rec.709  


=== Video ===
=== Video ===
* HDMI 2.0a output up to 4K@60Hz
 
* Digital Video output up to 4K@60Hz
* 4K HDR @ 30fps
* 4K HDR @ 30fps
* H.264/AVC Base/Main/High/High10 profile @ level 5.1; up to 4Kx2K @ 60fps
* H.264/AVC Base/Main/High/High10 profile @ level 5.1; up to 4Kx2K @ 60fps
Line 100: Line 217:


=== Audio ===
=== Audio ===
* 3.5mm Phone Jack
* 3.5mm Phone Jack
* 3-pin S/PDIF header
* Audio via Digital Video port


=== Camera ===


=== Camera ===
* Dual MIPI CSI，dual ISP, maximum input resolution of 13M pixels  
* Dual mipi CSI，dual ISP,Maximum input resolution of 13M pixels  
*


=== Network ===
=== Network ===
* 10/100/1000Mbps Ethernet
 
* WiFi 802.11 ac/a/b/g/n with Bluetooth 4.01 (optional)
* 10/100/1000Mbps Ethernet - Capable of pushing 941 MBit/s in iperf3
* Wi-Fi 802.11 ac/a/b/g/n with Bluetooth 4.01 (old version with 2x2) / Bluetooth 5 (new version with 1x1) (optional)


=== Storage ===
=== Storage ===
* microSD - bootable, support SDHC and SDXC, storage up to 256GB
 
* eMMC - bootable (optional eMMC Module)
* microSD - bootable, supports SDHC and SDXC
* 1 USB3.0 Host port
* eMMC - bootable (optional eMMC module)
* 1 USB type C OTG port with DP output  
* 1x USB 3.0 host port
* 2 USB2.0 Dedicated Host port (top one is USB-OTG)
* 1x USB Type-C OTG port with alternate mode DP output  
* 2x USB 2.0 dedicated host port


=== Expansion Ports ===
=== Expansion Ports ===
* 2x20 pins "Pi2" GPIO Header
* PCIe 2.1 (4 full-duplex lanes with 20Gbps) x4 open ended port


* 2x20 pins "Pi2" GPIO header
* PCI Express 2.1 x4 (four full-duplex lanes) open-ended port, [https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=712fa1777207 limited] to the Gen1 speed
==== GPIO Pins ====
{| class="wikitable plainrowheaders" border="1"
! scope="col" style="width:20em;" | Assigned To
! scope="col" | Pin Nr.
! scope="col" | Pin Nr.
! scope="col" style="width:20em;" | Assigned To
|-
| style="text-align:right;"| 3.3 V
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 1
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 2
| style="text-align:left;"| 5 V
|-
| style="text-align:right;"| GPIO1_C4 (I2C8_SDA) <sup style="font-style:italic;color:green">a</sup>
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 3
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 4
| style="text-align:left;"| 5 V
|-
| style="text-align:right;"| GPIO1_C5 (I2C8_SCL) <sup style="font-style:italic;color:green">a</sup>
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 5
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 6
| style="text-align:left;"| GND
|-
| style="text-align:right;"| GPIO4_D0 (CPU_GPCLK)
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 7
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 8
| style="text-align:left;"| GPIO4_C4 (UART2_TX)
|-
| style="text-align:right;"| GND
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 9
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 10
| style="text-align:left;"| GPIO4_C3 (UART2_RX)
|-
| style="text-align:right;"| GPIO1_C6
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 11
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 12
| style="text-align:left;"| GPIO3_D0 (I2S0_CLK)
|-
| style="text-align:right;"| GPIO1_C2
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 13
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 14
| style="text-align:left;"| GND
|-
| style="text-align:right;"| GPIO1_A1
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 15
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 16
| style="text-align:left;"| GPIO1_A4
|-
| style="text-align:right;"| 3.3 V
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 17
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 18
| style="text-align:left;"| GPIO4_C5 [SPDIF]
|-
| style="text-align:right;"| [UART4_TX] GPIO1_B0 (SPI1_TXD)
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 19
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 20
| style="text-align:left;"| GND
|-
| style="text-align:right;"| [UART4_RX] GPIO1_A7 (SPI1_RXD)
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 21
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 22
| style="text-align:left;"| GPIO4_D1
|-
| style="text-align:right;"| GPIO1_B1 (SPI1_CLK)
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 23
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 24
| style="text-align:left;"| GPIO1_B2 (SPI1_CSN0)
|-
| style="text-align:right;"| GND
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 25
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 26
| style="text-align:left;"| GPIO1_B5
|-
| style="text-align:right;"| GPIO1_B3 (I2C4_SDA)
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 27
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 28
| style="text-align:left;"| GPIO1_B4 (I2C4_SCL)
|-
| style="text-align:right;"| GPIO4_D3
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 29
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 30
| style="text-align:left;"| GND
|-
| style="text-align:right;"| GPIO4_D4
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 31
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 32
| style="text-align:left;"| GPIO3_D4 (I2S0_SDI1SDO3)
|-
| style="text-align:right;"| GPIO3_D5 (I2S0_SDI2SDO2)
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 33
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 34
| style="text-align:left;"| GND
|-
| style="text-align:right;"| GPIO3_D2 (I2S0_LRCKTX)
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 35
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 36
| style="text-align:left;"| GPIO3_D6 (I2S0_SDI3SDO1)
|-
| style="text-align:right;"| GPIO3_D1 (I2S0_LRCKRX)
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 37
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 38
| style="text-align:left;"| GPIO3_D3 (I2S0_SDI0)
|-
| style="text-align:right;"| GND
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 39
| style="text-align:center; background-color:black; color:gold; font-weight:bold;"| 40
| style="text-align:left;"| GPIO3_D7 (I2S0_SDO0)
|}
===== Notes =====
* '''a:''' pulled high to 3.3V through 2.2kOhm resistor
===== Linux /dev/gpiochip Assignments =====
{| class=wikitable style="max-width: 1000px; text-align: center;"
|-
! scope="row" | Pin Nr.
| 3 || 5 || 7 || 8 || 10 || 11 || 12 || 13 || 15 || 16 || 18 || 19 || 21 || 22 || 23 || 24 || 26 || 27 || 28 || 29 || 31 || 32 || 33 || 35 || 36 || 37 || 38 || 40
|-
! scope="row" | Chip
| 1 || 1 || 4 || 4 || 4 || 1 || 3 || 1 || 1 || 1 || 4 || 1 || 1 || 4 || 1 || 1 || 1 || 1 || 1 || 4 || 4 || 3 || 3 || 3 || 3 || 3 || 3 || 3
|-
! scope="row" | Line
| 20 || 21 || 24 || 20 || 19 || 22 || 24 || 18 || 1 || 4 || 21 || 8 || 7 || 25 || 9 || 10 || 13 || 11 || 12 || 27 || 28 || 28 || 29 || 26 || 30 || 25 || 27 || 31
|}
On Linux, using the new <code>/dev/gpiochip</code> API, the <code>''n''</code> in <code>GPIO''n''_''XX''</code> appears to correlate to the number of the <code>/dev/gpiochip''n''</code>, and the <code>''XX''</code> to the definition <code>RK_P''XX''</code> of lines in <code>include/dt-bindings/pinctrl/rockchip.h</code> of the Linux kernel source. Having these named in the dts would be nice.
You can use [https://git.kernel.org/pub/scm/libs/libgpiod/libgpiod.git/ libgpiod] to drive them, and test them with the included tools (<code>gpioinfo</code>, <code>gpioset</code>, ...)
For example, <code>gpioset 4 25=1</code> (run as root) would turn pin 22 on. Do beware that poking the wrong GPIO pin can lock up your system.
The conversion table at right is also available as a [https://gist.github.com/CounterPillow/fe066655bf2d929148fe6eb3f15b1dd5 C header file].
=== Working Features ===
{| class="wikitable sortable"
! Feature/Option
! Android
! Android Version
! Linux
! Linux Version
! Test/Verify Steps
! Notes
! Product Link
|-
| PINE64 LCD Touchscreen (Screen/Touch)
| Yes/Yes
|
| No/No
|
|
| Maybe [https://github.com/avafinger/pine64-touchscreen this] will help get this working?
| [https://pine64.com/?product=7-lcd-touch-screen-panel 7-inch LCD Touch Screen Panel]
|-
| Wireless
<small>ROCKPro64 2×2 MIMO Dual Band WiFi 802.11AC / Bluetooth 4.2 Module (old)
ROCKPro64 1x1 Dual Band WiFi 802.11AC / Bluetooth 5.0 Module (new)</small>
| Yes/Yes
|
| No/Yes*
|
| For the "new" ROCKPro64 WIFI module: Verified with Manjaro ARM (kernel 6.2.5). A config file ("firmware file") is needed at <code>/lib/firmware/brcm/brcmfmac43455-sdio.txt</code>. See [[#Getting wifi working ("new" wifi module)]] for the file contents and details.
| In 0.7.9 Ayufan linux releases this is deliberately disabled for stability reasons. On Manjaro ARM (kernel 6.2.5), WIFI seems to be stable with the firmware file. On a 5GHz network (802.11AC), it is possible to get about 120Mbps using the "new" ROCKPro64 WIFI module.
| [https://store.pine64.org/product/rockpro64-1x1-dual-band-wifi-802-11acbluetooth-5-0-module ROCKPro64 1x1 Dual Band WiFi 802.11AC / Bluetooth 5.0 Module]
|-
| USB OTG
|
|
|
|
| use this script: [https://github.com/ayufan-rock64/linux-package/blob/master/root-rockpro64/usr/local/sbin/rockpro64_enable_otg.sh rockpro64_enable_otg.sh], then configure ip on usb0: ifconfig usb0 169.169.222.222 and run iperf, you should likely see about 200-300MB/s
| [[ROCKPro64#OTG_mode]]
|
|-
| USB Mass Storage USB2/USB3
| Yes/yes
|
| Yes/Yes
|
|
|
|
|-
| Dedicated Fan Power (pwm1)
|
|
| Yes
|
|
| You might want to use [https://github.com/tuxd3v/ats ATS].
|
|-
| GPIO pins (raw or via RPI python scripts)
|
|
|
|
|
| Check out [https://forum.frank-mankel.org/topic/292/rockpro64-rp64-gpio/2 what Frank Mankel has done].
|
|-
| MIPI CSI Camera 1 and 2
|
|
|
|
|
|
|
|-
| eDP
|
|
|
|
|
|
|
|-
| HDMI Audio
| Yes
| 7.1.2
| Yes
| 4.4.132-1083 - 4.4.138-1100
|
| Stopped working in 4.4.154.1105. Ayufan is looking into it. This is working in Manjaro ARM (kernel 6.2.5). Select the <code>Analog Output (Built-in Audio Stereo)</code> option in the audio output device selection window (either use <code>pavucontrol</code> or the volume button in the KDE desktop). Despite the slightly misleading name, audio does go through the HDMI port. See here for details: https://forum.manjaro.org/t/no-hdmi-audio-on-rockpro64/25595/2.
|
|-
| 3.5mm Audio/Mic
|
|
|
|
|
|
|
|-
| USB-C Host
|
|
|
|
|
|
|
|-
| Display via USB-C
| Yes
| 7.x and 8.x
|
|
|
| eDP via USB-C per tillim. No sound on Android 7.x. Sound does work on Android 8.x
|
|-
| ROCKPro64 PLAYBOX ENCLOSURE
| N/A
|
| N/A
|
| N/A
| Ventilation does not exist, thus requires manual changes to add venting. Case should be modified to account power adapter not being centered in cut holes. Opening the case once close without modifying it first is nearly impossible without special tools. Graphene heatsink is included and does well for Linux but not Android.
| [https://pine64.com/?product=rockpro64-playbox-enclosure ROCKPro64 Playbox Enclosure]
|-
| ROCKPro64 30mm Tall Profile Heatsink
| N/A
|
| N/A
|
| N/A
|
| [https://pine64.com/product/rockpro64-30mm-tall-profile-heatsink/ ROCKPro64 30&nbsp;mm Tall-Profile Heatsink]
|-
| ROCKPro64 20mm Mid Profile Heatsink
| N/A
|
| N/A
|
| N/A
|
| [https://pine64.com/?product=rockpro64-20mm-mid-profile-heatsink ROCKPro64 20&nbsp;mm Mid-Profile Heatsink]
|-
| Fan For ROCKPro64 20mm Mid Profile Heatsink
| N/A
|
| N/A
|
| N/A
| You might want to use [https://github.com/tuxd3v/fanctl fanctl] to control the fan while keeping your CPU cool
| [https://pine64.com/?product=fan-for-rockpro64-20mm-mid-profile-heatsink Fan For ROCKPro64 20&nbsp;mm Mid-Profile Heatsink]
|-
| HDMI output 4K@60Hz
|
|
|
|
|
|
|
|-
| PCI Express 2.1
|
|
|
|
|
| The PCI Express interface of the RK3399 [https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=712fa1777207 is limited] to the Gen1 speed.  As a result, some installed PCI Express devices may operate with degraded performance, such as M.2 SSDs that support fewer than four PCI Express lanes, installed using an adapter like [https://pine64.com/product/rockpro64-pci-e-x4-to-m-2-ngff-nvme-ssd-interface-card/ this one].
|
|-
| Real Time Clock (RTC) battery backup
|
|
|
|
|
|
| [https://pine64.com/product/rtc-backup-battery-holder-cr-2032/ RTC Backup Battery Holder CR2032]
|-
| Boot from USB/PXE
|
|
|
|
|
|
|
|}
RockChip themselves have tables of supported features at 4.4 and mainline kernel versions [http://opensource.rock-chips.com/wiki_Status_Matrix in their wiki here].
== Board Information, Schematics and Certifications ==
* Board dimensions: 133&nbsp;mm&nbsp;x 80&nbsp;mm&nbsp;x 19&nbsp;mm
* Power input: 12&nbsp;V, 3&nbsp;A or 5&nbsp;A, using 5.5&nbsp;mm (OD)&nbsp;/ 2.1&nbsp;mm (ID) type M barrel DC connector (also known as DC 5521)
* [https://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf ROCKPro64 Schematic v2.1 (Second Batch Production Release)]
** [https://files.pine64.org/doc/rockpro64/RockPro64_v21_Boardoutline-top.dxf ROCKPro64 v2.1 Board Top Outline in AutoCad DXF format]
** [https://files.pine64.org/doc/rockpro64/RockPro64_v21_Boardoutline-bottom.dxf ROCKPro64 v2.1 Board Bottom Outline in AutoCad DXF format]
** [[:File:Pine64-rockpro64-component-placement-top-v21-20180702.pdf|ROCKPro64 v2.1 Board Top Silkscreen in PDF format]] (contains component labels)
** [[:File:Pine64-rockpro64-component-placement-bottom-v21-20180702.pdf|ROCKPro64 v2.1 Board Bottom Silkscreen in PDF format]] (contains component labels)
** [https://files.pine64.org/doc/rockpro64/RockPro64_v21_Boardoutline-top.pdf ROCKPro64 v2.1 Board Top Outline in PDF format]
** [https://files.pine64.org/doc/rockpro64/RockPro64_v21_Boardoutline-bottom.pdf ROCKPro64 v2.1 Board Bottom Outline in PDF format]
* [https://files.pine64.org/doc/rockpro64/rockpro64_v20-SCH.pdf ROCKPro64 Schematic v2.0 (Pilot Production Release)]
** [http://files.pine64.org/doc/rockpro64/Rockpro64-ver2.0-topsilk_ref.pdf ROCKPro64 v2.0 Board Top Silkscreen in PDF format] (contains component labels)
** [https://files.pine64.org/doc/rockpro64/ROCKPRo64%20Engineering%20Change%20Notice%2020180628RP01.pdf Engineering Change Notice for v2.0 to turn on 3.3V power on PCIe]
* [https://files.pine64.org/doc/rockpro64/rockpro64_wifi_ap6359SA.pdf ROCKPro64 AP6359SA Wifi/BT Schematic]
* [https://files.pine64.org/doc/rockpro64/Rockpro64%20Pi-2%20Connector%20ver0.2.png ROCKPro64 Pi-2 Pin assignment and definition]
* [https://files.pine64.org/doc/rockpro64/RockPro-3D-model.zip ROCKPro64 3D model]


== ROCKPro64 Board Information, Schematics and Certifications ==
Certifications:
* Board Dimensions: 133mm x 80mm x 19mm
* Input Power: +12V @3A/5A with 5.5mm/2.1mm Type M Barrel type DC connector
* [http://files.pine64.org/doc/rockpro64/RockPro64_Boardoutline%20Model.pdf ROCKPro64 Board Outline]
* [http://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf ROCKPro64 Schematic v2.1 (Second Batch Production Release)]
* [http://files.pine64.org/doc/rockpro64/rockpro64_v20-SCH.pdf ROCKPro64 Schematic v2.0 (Pilot Production Release)]
** [http://files.pine64.org/doc/rockpro64/ROCKPRo64%20Engineering%20Change%20Notice%2020180628RP01.pdf Engineer Change Notice for turn on 3.3V power on PCIe]
* [http://files.pine64.org/doc/rockpro64/Rockpro64-ver2.0-topsilk_ref.pdf ROCKPro64 Board Component layout v2.0 (Pilot Production Release)]
* [http://files.pine64.org/doc/rockpro64/Rockpro64%20Pi-2%20Connector%20ver0.2.png ROCK64 Pi-2 Pine assignment and defination]


* ROCK64 Certifications:
* Disclaimer: Please note that PINE64 SBC is not a "final" product and in general certification is not necessary. However, PINE64 still submit the SBC for FCC, CE, and ROHS certification and obtain the certificates to proof that SBC board is capable on passing the testing. Please note a final commercial product needs to performs its owns testing and obtains its owns certificates.
** FCC, CE, and RoHS Certification in progress
* [https://files.pine64.org/doc/cert/ROCKPro64%20FCC%20SDOC%20Certificate.pdf ROCKPro64 FCC Certificate]
* [https://files.pine64.org/doc/cert/ROCKPro64%20CE-EMC%20Certificate.pdf ROCKPro64 CE Certificate]
* [https://files.pine64.org/doc/cert/ROCKPro64%20ROHS%20%20SEC180529404001E%20Report.pdf ROCKPro64 RoHS Report]


== Datasheets for Components and Peripherals ==
== Datasheets for Components and Peripherals ==
* Rockchip RK3399 SoC information:
 
** [http://www.rock-chips.com/a/en/products/RK33_Series/2016/0419/758.html Rockchip RK3399 SoC Brief]
Rockchip RK3399 SoC information:
** [http://opensource.rock-chips.com/images/6/60/Rockchip_RK3399_Datasheet_V1.6-20170301.pdf Rockchip RK3399 Datasheet V1.6]
 
** [http://opensource.rock-chips.com/images/e/ee/Rockchip_RK3399TRM_V1.4_Part1-20170408.pdf Rockchip RK3399 Technical Reference Manual part 1]
* [https://www.rock-chips.com/a/en/products/RK33_Series/2016/0419/758.html Rockchip RK3399 SoC Brief]
** [http://files.pine64.org/doc/datasheet/rockpro64/RK808%20datasheet%20V0.8.pdf Rockchip RK808 Datasheet V0.8]
* [http://opensource.rock-chips.com/images/d/d7/Rockchip_RK3399_Datasheet_V2.1-20200323.pdf Rockchip RK3399 Datasheet V2.1]
* LPDDR4 (200 Balls) SDRAM:
* [http://opensource.rock-chips.com/images/e/ee/Rockchip_RK3399TRM_V1.4_Part1-20170408.pdf Rockchip RK3399 Technical Reference Manual part 1]
** [http://files.pine64.org/doc/datasheet/rockpro64/SM512M32Z01MD2BNP(200BALL).pdf Micron LPDDR4 Mobile LPDDR4 Datasheet]
* [https://files.pine64.org/doc/datasheet/rockpro64/RK808%20datasheet%20V0.8.pdf Rockchip RK808 Datasheet V0.8]
* eMMC information:
 
** [http://files.pine64.org/doc/rock64/PINE64_eMMC_Module_20170719.pdf PINE64 eMMC module schematic]
LPDDR4 (200 Balls) SDRAM:
** [http://files.pine64.org/doc/rock64/usb%20emmc%20module%20adapter%20v2.pdf PINE64 USB adapter for eMMC module V2 schematic]
 
** [http://files.pine64.org/doc/rock64/USB%20adapter%20for%20eMMC%20module%20PCB.tar PINE64 USB adapter for eMMC module PCB in JPEG]
* [https://files.pine64.org/doc/datasheet/rockpro64/SM512M32Z01MD2BNP(200BALL).pdf Micron LPDDR4 Mobile LPDDR4 Datasheet]
** [http://files.pine64.org/doc/datasheet/pine64/SDINADF4-16-128GB-H%20data%20sheet%20v1.13.pdf SanDisk eMMC Datasheet]
 
** [http://files.pine64.org/doc/datasheet/pine64/H26M64003DQR%20Datasheet.pdf Hynix eMMC Datasheet]
eMMC information:
** [http://files.pine64.org/doc/datasheet/pine64/FORESEE_eMMC_NCEMBSF9-xxG%20SPEC%20A0%2020150730.pdf Foresee eMMC Datasheet]
 
* SPI NOR Flash information:
* [https://files.pine64.org/doc/rock64/PINE64_eMMC_Module_20170719.pdf PINE64 eMMC module schematic]
** [http://files.pine64.org/doc/datasheet/pine64/w25q128jv%20spi%20revc%2011162016.pdf WinBond 128Mb SPI Flash Datasheet]
* [https://files.pine64.org/doc/rock64/usb%20emmc%20module%20adapter%20v2.pdf PINE64 USB adapter for eMMC module V2 schematic]
** [http://files.pine64.org/doc/datasheet/pine64/GD25Q128C-Rev2.5.pdf GigaDevice 128Mb SPI Flash Datasheet]
* [https://files.pine64.org/doc/rock64/USB%20adapter%20for%20eMMC%20module%20PCB.tar PINE64 USB adapter for eMMC module PCB in JPEG]
* Heatsink related info:
* [https://files.pine64.org/doc/datasheet/pine64/E-00517%20FORESEE_eMMC_NCEMAM8B-16G%20SPEC.pdf 16GB Foresee eMMC Datasheet]
** [http://files.pine64.org/doc/datasheet/rockpro64/Rockpro%20Passive%20Heatsink%20Spec.jpg ROCKPro64 Passive Heatsink Dimension Drawing]
* [https://files.pine64.org/doc/datasheet/pine64/SDINADF4-16-128GB-H%20data%20sheet%20v1.13.pdf 32GB/64GB/128GB SanDisk eMMC Datasheet]
** [http://files.pine64.org/doc/datasheet/rockpro64/LMS-TC150%20Silicon%20Thermal%20Pad.pdf Heatsink Thermal Pad Specification]
 
* Wireless related info:
SPI NOR Flash information:
** [[Media:AP6356 datasheet V1.0 07252014.pdf|AMPAK AP6356 2x2 WiFi + Bluetooth4.1 Datasheet]]
 
* Ethernet related info:
* [https://files.pine64.org/doc/datasheet/pine64/w25q128jv%20spi%20revc%2011162016.pdf WinBond 128Mb SPI Flash Datasheet]
** [http://files.pine64.org/doc/datasheet/rock64/RTL8211F-CG-Realtek.pdf Realtek RTL8211F 10/100/1000M Ethernet Transceiver Datasheet]
* [https://files.pine64.org/doc/datasheet/pine64/GD25Q128C-Rev2.5.pdf GigaDevice 128Mb SPI Flash Datasheet]
* Peripheral related info:
 
** [http://files.pine64.org/doc/datasheet/rockpro64/ASM1061_Data%20Sheet_R1_8.pdf asmedia ASM1061 PCIe SATA 2.0 Datasheet]
Heatsink related info:
* Remote control button mapping
 
** [http://files.pine64.org/doc/Pine%20A64%20Schematic/remote-wit-logo.jpg Official Remote Control for the PINE64 Button Mapping]
* [https://files.pine64.org/doc/datasheet/rockpro64/Rockpro%20Passive%20Heatsink%20Spec.jpg ROCKPro64 Passive Heatsink Dimension Drawing]
* [https://files.pine64.org/doc/datasheet/rockpro64/LMS-TC150%20Silicon%20Thermal%20Pad.pdf Heatsink Thermal Pad Specification]
 
Wireless related info:
 
* AMPAK AP6256 11AC WiFi + Bluetooth5.0 Datasheet [https://files.pine64.org/doc/datasheet/rockpro64/AP6256%20datasheet_V1.3_12202017.pdf (v. 1.3)] [http://files.pine64.org/doc/datasheet/PinebookPro/AP6256%20datasheet_V1.7_12282018.pdf (v. 1.7)]
 
Ethernet related info:
 
* [https://files.pine64.org/doc/datasheet/rock64/RTL8211F-CG-Realtek.pdf Realtek RTL8211F 10/100/1000M Ethernet Transceiver Datasheet]
 
Peripheral related info:
 
* [https://files.pine64.org/doc/datasheet/rockpro64/ASM1061_Data%20Sheet_R1_8.pdf asmedia ASM1061 PCIe SATA 2.0 Datasheet]
 
Remote control button mapping:
 
* [https://files.pine64.org/doc/Pine%20A64%20Schematic/remote-wit-logo.jpg Official Remote Control for the PINE64 Button Mapping]
 
Audio Codec (ES8316) (under board):
 
* [http://everest-semi.com/pdf/ES8316%20PB.pdf Everest ES8316 Audio Codec]
 
PWM controlled fan, SPDIF, and RTC Battery Backup headers:
 
* [https://www.jst-mfg.com/product/pdf/eng/ePH.pdf JST-PH connector]
 
== Useful Articles and Blog Posts ==
 
If you want to dive in to the ecosystem, here's a short list of various articles and blog posts that can help you set up your soft- or hardware development environment.
 
* [https://stikonas.eu/wordpress/2019/09/15/blobless-boot-with-rockpro64/ Blobless boot with RockPro64 by Andrius Štikonas]
* [https://marcin.juszkiewicz.com.pl/2020/06/17/ebbr-on-rockpro64/ EBBR on RockPro64 by Marcin Juszkiewicz]
* [[ROCKPro64 Device Tree Overlays on Mainline]]
* [[ROCKPro64 Hardware Tweaks]]
 
== The NAS Case for the ROCKPro64 ==
 
[[file:NASCaseMain.png|thumb|right|Front View of the PINE64 NAS Case for the ROCKPro64]]
 
Please [[NAS Case|follow this this link]] for '''detailed instructions on how to assemble the ROCKPro64 NAS Case'''.
 
The NAS Case instructions also contains detailed information about:
*what the NAS Case ships with
*What additional things you need to purchase for your NAS Case
*What optional things you can consider purchasing for your NAS build
*What OS Image we recommend you use for your NAS build
*IO accessibility after installing the ROCKPro64 into the NAS Case
*[https://files.pine64.org/doc/rockpro64/ROCKPro64%20NAS%20Case%20Exploded%20View%20Diagram.pdf NAS Case Exploded View]
*[https://files.pine64.org/doc/rockpro64/NAS%20Case%20Drawing.dwg NAS Case Drawing]
 
== 3D printable ITX mounting brackets ==
 
[[file:ITX-Bracket-Mounted.jpg|300px|thumb|right|A [[Quartz64]] Model-A mounted in an ITX case using 3D printed brackets, which can also be used for the ROCKPro64]]
 
Allows mounting a ROCKPro64 or Quartz64 Model-A board inside a regular PC case that conforms to the ITX standard, using 3D printed brackets:
 
* AMF/STL/STEP files plus the original FreeCAD file used to create the models [[File:RP64-A_Q64-A_to_ITX_mounting_brackets.zip]]
* Make sure to flip the two brackets by 180 degrees on one of the horizontal axes (X/Y) in your slicer of choice before printing to avoid unnecessary supports
* To allow enough clearance between the board and the bracket you either need to print four copies of the washer model or add nut(s) between the board and the bracket
* If using nuts for the clearance between the board and the brackets, make sure it creates at least 3.2mm of spacing in between
* Depending on the accuracy and calibration of a 3D printer, slight deviation can occur and you likely need to manually widen some of the holes to allow screws to fit


== Other Resources ==
== Other Resources ==
* [https://forum.pine64.org/forumdisplay.php?fid=98 ROCKPro64 Forum]
* [https://forum.pine64.org/forumdisplay.php?fid=98 ROCKPro64 Forum]
* [http://www.pine64.xyz:9090/?channels=ROCK64 ROCK64/ROCKPro64 IRC Channel]
* [https://pine64.com/?post_type=product PINE64 shop]
* [https://github.com/rockchip-linux Rockchip Linux GitHub Repo]
* [https://github.com/rockchip-linux Rockchip Linux GitHub Repo]
* [http://opensource.rock-chips.com/ Rockchip Open Source Wiki]
* [http://opensource.rock-chips.com/ Rockchip Open Source Wiki]
* [http://wiki.pine64.org/index.php/RockPro64_Guides ROCK64 Guides]
* ExplainingComputers have a video review [https://www.youtube.com/watch?v=CeoNHGFN_30 of the RockPro64 here, including linux first boot.]
* [[ROCKPro64 Installing Arch Linux ARM]]
* [[ROCKPro64 Powering From An ATX Supply]]
 
== Troubleshooting ==
 
=== No Video or GPU Acceleration on Debian ===
 
'''Note:''' This issue should be non-existent in newer versions of the Linux kernel, as well as in long-term support (LTS) kernels, with [https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=80f4e62730a91572b7fdc657f7bb747e107ae308 this upstream kernel commit] that introduced the required module dependency.
 
If you can log in through serial but don't get any video or GPU acceleration on Debian, this is likely due to Debian's decision to compile the devfreq governors as loadable modules but not including them early enough for panfrost to be able to be provided with one of them.
 
The usual sign of this being the case is the following line in the kernel log: <code>[drm:panfrost_devfreq_init [panfrost]] *ERROR* Couldn't initialize GPU devfreq</code>
 
To fix this issue, run the following as <code>root</code> and reboot:
 
echo governor_simpleondemand >> /etc/initramfs-tools/modules
update-initramfs -u -k $(uname -r)
 
=== PCIe probe failures on Linux kernel boot ===
 
While booting the Linux kernel, you might experience PCIe probe failures, which render the attached PCIe device inaccessible.  The [https://lore.kernel.org/all/20230509153912.515218-1-vincenzopalazzodev@gmail.com/ "drivers: pci: introduce configurable delay for Rockchip PCIe bus scan"] thread on the Linux kernel mailing list (LKML) discusses this issue and proposes a fix.
 
Manjaro ARM applies the following patches to the kernel package, which fix the issue:
 
* [https://gitlab.manjaro.org/manjaro-arm/packages/core/linux/-/blob/44e81d83b7e002e9955ac3c54e276218dc9ac76d/1005-rk3399-rp64-pcie-Reimplement-rockchip-PCIe-bus-scan-delay.patch 1005-rk3399-rp64-pcie-Reimplement-rockchip-PCIe-bus-scan-delay.patch]
* [https://gitlab.manjaro.org/manjaro-arm/packages/core/linux/-/blob/44e81d83b7e002e9955ac3c54e276218dc9ac76d/1007-arm64-dts-rockchip-Add-PCIe-bus-scan-delay-to-RockPr.patch 1007-arm64-dts-rockchip-Add-PCIe-bus-scan-delay-to-RockPr.patch]
 
[[Category:ROCKPro64]]
[[Category:Rockchip RK3399]]

Latest revision as of 07:30, 17 November 2024

The ROCKPro64

The ROCKPro64 is the most powerful single-board computer released by PINE64. It is powered by a Rockchip RK3399 hexa-core (dual ARM Cortex A72 and quad ARM Cortex A53) 64-bit processor with a Mali T-860 quad-core GPU. The key features include a PCI Express (PCIe) x4 open-ended slot, the use of LPDDR4 DRAM, and industry-standard heatsink mounting holes.

The ROCKPro64 is equipped with 2 or 4 GB of LPDDR4 system memory, and 128 Mb of SPI boot flash. There is also an optional eMMC module (up to 128 GB) and microSD slot for booting. The board is equipped with 1x USB 3.0 Type-C host port with DP 1.2, 1x USB 3.0 Type-A host port, 2x USB 2.0 host port, Gigabit Ethernet, PI-2 GPIO bus, MiPi DSI interface, eDP interface, touch panel interface, stereo MiPi CSI interface, as well as many other device interfaces such as UART, SPI, I2C, for makers to integrate with sensors and other peripherals. Many different operating systems (OSes) are freely available from the open-source community, such as Linux (Ubuntu, Debian, Arch), BSD and Android.

Getting Started

The article ROCKPro64 Getting Started gives important information to get the board up and running.

Software releases

In the ROCKPro64 Software Releases page, you will find a complete list of currently supported Operating System images that work with the ROCKPro64, as well as other related software. The Software Release page has links to download the images as well as high level instructions to load each image.

Please see the Getting started page for detailed discussion of what you need (prerequisites) as well as instructions if the high level instructions are insufficient.

Board Layout

A hi-res picture of v2.1 rear.
A thermal image of v2.1 front (upside-down).


An annotated ROCKPro64

Main Chips

  • RK3399 system-on-chip (1)
  • LPDDR4 SDRAM 1 (18)
  • LPDDR4 SDRAM 2 (3)
  • SPI NOR flash memory (17)
  • RK808 power management (near 19)
  • RTL8211 ethernet transceiver (near 25)
  • ES8316 Sound Codec (on rear of board)
  • The heatsink mounting holes around the RK3399 are 59 mm apart

Switches

The Power button (11, SW3): is the same as on your mobile phone - press and release after about 1 second to power on. Press and hold for about 3 seconds to power off.

The Reset button (10, SW901): performs a reset.

The Recover button (28, SW900): used to enter maskrom mode.

Connectors, Sockets and Headers

Diagram Schematic
designator		 Silkscreen
label		 Number
of pins		 Description
2 U39 PI-2-bus 40 Pi-2 bus
4 J8 +FAN- 2 PWM controlled fan header
5 J10 SPDIF 3 SPDIF header
6 U6 +RTC- 2 RTC battery backup header
7 U31 Wifi-BT 16 SDIO WIFI/BT module-MIMO 2
8 USB3 9 USB-3 and USB Type C
9 USB1 2×4 Dual USB-2
12 IR1 IR 3 infrared receiver socket
13 J16 Headphone+mic 4 Headphone + mic 3.5mm jack
- CON16 GND PWR RST GND 4 Power & reset, unpopulated
header near Headphone jack
14 U29 EMMC 34 eMMC connector
(Note: Some datasheets indicate a low
supported number of mating cycles.)
14* J13 13 TF-card, a.k.a. microSD
(* under 14 on the bottom side)
15 U30 14 SDIO WIFI/BT module-MIMO 1
16 SW4 2 Jumper to #Disable eMMC
19 J15 PCI 64 PCI-express X4 socket
20 J21 DSI 30 DSI
21 J22 EDP 30 LCD EDP
22 CON1 TP 6 touch panel connector
23 CON15 4 DC out for SATA disk cable
(direct connect from DC-IN)
24 J11 DC-IN 2 Power input, positive tip;
12V/3A (minimum) recommended
25 U32 8 8P8C (often referred to as 'RJ45')
26 J14 19 HDMI
27 J17 MIPI CAM 32 MIPI-1
29 J19 MIPI CAM 32 MIPI-2
30 J18 CIF 26 CIF

LEDs

A green LED next to the 12V input barrel connector will light as long as there is 12V applied to the connector. (Even if the RockPro64 is powered off.)

A white LED behind the reset button will light as long as the RockPro64 is running (it comes on a few seconds after power on, when control is passed to the operating system.)

A red LED behind the reset button is DIY - it is lit for example if the board is in OTG mode with an Ayufan image, or if an Android image is in standby mode.

Yellow and green LEDs on the LAN socket behave in a standard way.

Jumpers

They are used for boot device selection, as described in the following section.

Disable eMMC

There is an unlabelled (on the PCB silk-screen) 2-pin jumper (16) between the eMMC socket (14) and the SPI chip (17). It is designated as SW4 on the schematic diagram. The default condition is OPEN (no jumper). It is useful for controlling the boot as follows:

Default boot device (with no SPI software) is eMMC, then SDcard. If both the eMMC and the SDcard contain bootable images then the eMMC can be disabled by installing the jumper. This completely removes the eMMC from the resulting OS. If you wish the eMMC to be visible in the booted OS the jumper should be removed 2 seconds after applying power (and before the white LED comes on).

The possible combinations are summarised in the table below.

  • 1 = present
  • 0 = not present
µSD eMMC SW4 boot from
0 0 0 unsupported
0 0 1 unsupported
0 1 0 eMMC
0 1 1 unsupported
1 0 0 SDCard
1 0 1 SDCard
1 1 0 eMMC
1 1 1 SDCard

Disable SPI (while booting)

There is a second possibility to jumper your ROCKPro64: If you mess-up your SPI and are unable to boot, jumpering pins 23 (CLK) and 25 pin (GND) on the PI-2-bus header will disable the SPI as a boot device. (This was taken from the IRC logs, 09 August 2018 @ 17:23) You have to remove the jumper 2 seconds after having started your RP64 (before the white LED turns ON) otherwise the SPI will be missing and you won't be able to flash it. Ayufan images contain (at the moment) only one script for the SPI and the RP64, it's "rockpro64_reset_spi_flash". Other SPI scripts are dedicated to the R64 (as it is written on the name) and it will mess-up your RP64 SPI if you use them.

Hardware Compatibility

The hardware compatibility list can be found under ROCKPro64 Hardware compatibility.

Board Features

This section outlines the most important characteristics of the board and its components.

SoC and Memory Specification

  • Based on Rockchip RK3399
Rockchip RK3399.png

CPU Architecture

  • Dual-core Cortex-A72 up to 2.0GHz CPU
  • Quad-core Cortex-A53 up to 1.5GHz CPU
  • big.LITTLE architecture: Dual Cortex-A72 + Quad Cortex-A53, 64-bit CPU
  • Cortex-A72:
    • 1-4x Symmetrical Multiprocessing (SMP) within a single processor cluster, and multiple coherent SMP processor clusters through AMBA 5 CHI or AMBA 4 ACE technology
    • AArch64 for 64-bit support and new architectural features
    • L1 cache 48KB Icache and 32KB Dcache for each A72
    • L2 cache 1024KB for big cluster
    • DSP & SIMD extensions
    • VFPv4 floating point
    • Hardware virtualization support
  • Cortex-A53:
    • L1 cache 32KB Icache and 32KB Dcache for each A53
    • L2 cache 512KB for little cluster
  • Full implementation of the ARM architecture v8-A instruction set
  • ARM Neon Advanced SIMD (single instruction, multiple data) support for accelerated media and signal processing computation
  • ARMv8 Cryptography Extensions
  • In-order pipeline with symmetric dual-issue of most instructions
  • Include VFP v3 hardware to support single and double-precision operations
  • TrustZone technology support
  • Full CoreSight debug solution
  • One isolated voltage domain to support DVFS

GPU Architecture

  • ARM Mali-T860MP4 Quad-core GPU
  • The highest performance GPUs built on Arm Mali’s famous Midgard architecture, the Mali-T860 GPU is designed for complex graphics use cases and provides stunning visuals for UHD content.
  • Frequency: 650MHz
  • Throughput: 1300Mtri/s, 10.4Gpix/s
  • OpenGL® ES 1.1, 1.2, 2.0, 3.1, 3.2, Vulkan 1.0*, OpenCL™ 1.1, 1.2, DirectX® 11 FL11_1, RenderScript™.

System Memory

  • LPDDR4 RAM Memory Variants: Dual Channels 2GB and 4GB.
  • Storage Memory: 128Mb built-in SPI Flash memory (as at August 2018 only support for USB boot).

Display

  • Dual VOP: one supports resolutions up to 4096x2160 and AFBC; the other supports resolutions up to 2560x1600
  • Dual channel MIPI-DSI (4 lanes per channel)
  • eDP 1.3 (4 lanes with 10.8Gbps) to support displays, with PSR
  • Digital Video port up to 4Kp60
  • DisplayPort 1.2 (4 lanes, up to 4K 60Hz)
  • Supports Rec.2020 and conversion to Rec.709

Video

  • Digital Video output up to 4K@60Hz
  • 4K HDR @ 30fps
  • H.264/AVC Base/Main/High/High10 profile @ level 5.1; up to 4Kx2K @ 60fps
  • H.265/HEVC Main/Main10 profile @ level 5.1 High-tier; up to 4Kx2K @ 60fps
  • VP9, up to 4Kx2K @ 60fps
  • MPEG-1, ISO/IEC 11172-2, up to 1080P @ 60fps
  • MPEG-2, ISO/IEC 13818-2, SP@ML, MP@HL, up to 1080P @ 60fps
  • MPEG-4, ISO/IEC 14496-2, SP@L0-3, ASP@L0-5, up to 1080P @ 60fps
  • VC-1, SP@ML, MP@HL, AP@L0-3, up to 1080P @ 60fps
  • MVC is supported based on H.264 or H.265, up to 1080P @ 60fps

Audio

  • 3.5mm Phone Jack
  • 3-pin S/PDIF header
  • Audio via Digital Video port

Camera

  • Dual MIPI CSI，dual ISP, maximum input resolution of 13M pixels

Network

  • 10/100/1000Mbps Ethernet - Capable of pushing 941 MBit/s in iperf3
  • Wi-Fi 802.11 ac/a/b/g/n with Bluetooth 4.01 (old version with 2x2) / Bluetooth 5 (new version with 1x1) (optional)

Storage

  • microSD - bootable, supports SDHC and SDXC
  • eMMC - bootable (optional eMMC module)
  • 1x USB 3.0 host port
  • 1x USB Type-C OTG port with alternate mode DP output
  • 2x USB 2.0 dedicated host port

Expansion Ports

  • 2x20 pins "Pi2" GPIO header
  • PCI Express 2.1 x4 (four full-duplex lanes) open-ended port, limited to the Gen1 speed

GPIO Pins

Assigned To Pin Nr. Pin Nr. Assigned To
3.3 V 1 2 5 V
GPIO1_C4 (I2C8_SDA) a 3 4 5 V
GPIO1_C5 (I2C8_SCL) a 5 6 GND
GPIO4_D0 (CPU_GPCLK) 7 8 GPIO4_C4 (UART2_TX)
GND 9 10 GPIO4_C3 (UART2_RX)
GPIO1_C6 11 12 GPIO3_D0 (I2S0_CLK)
GPIO1_C2 13 14 GND
GPIO1_A1 15 16 GPIO1_A4
3.3 V 17 18 GPIO4_C5 [SPDIF]
[UART4_TX] GPIO1_B0 (SPI1_TXD) 19 20 GND
[UART4_RX] GPIO1_A7 (SPI1_RXD) 21 22 GPIO4_D1
GPIO1_B1 (SPI1_CLK) 23 24 GPIO1_B2 (SPI1_CSN0)
GND 25 26 GPIO1_B5
GPIO1_B3 (I2C4_SDA) 27 28 GPIO1_B4 (I2C4_SCL)
GPIO4_D3 29 30 GND
GPIO4_D4 31 32 GPIO3_D4 (I2S0_SDI1SDO3)
GPIO3_D5 (I2S0_SDI2SDO2) 33 34 GND
GPIO3_D2 (I2S0_LRCKTX) 35 36 GPIO3_D6 (I2S0_SDI3SDO1)
GPIO3_D1 (I2S0_LRCKRX) 37 38 GPIO3_D3 (I2S0_SDI0)
GND 39 40 GPIO3_D7 (I2S0_SDO0)
Notes
  • a: pulled high to 3.3V through 2.2kOhm resistor
Linux /dev/gpiochip Assignments
Pin Nr. 3 5 7 8 10 11 12 13 15 16 18 19 21 22 23 24 26 27 28 29 31 32 33 35 36 37 38 40
Chip 1 1 4 4 4 1 3 1 1 1 4 1 1 4 1 1 1 1 1 4 4 3 3 3 3 3 3 3
Line 20 21 24 20 19 22 24 18 1 4 21 8 7 25 9 10 13 11 12 27 28 28 29 26 30 25 27 31

On Linux, using the new /dev/gpiochip API, the n in GPIOn_XX appears to correlate to the number of the /dev/gpiochipn, and the XX to the definition RK_PXX of lines in include/dt-bindings/pinctrl/rockchip.h of the Linux kernel source. Having these named in the dts would be nice.

You can use libgpiod to drive them, and test them with the included tools (gpioinfo, gpioset, ...)

For example, gpioset 4 25=1 (run as root) would turn pin 22 on. Do beware that poking the wrong GPIO pin can lock up your system.

The conversion table at right is also available as a C header file.

Working Features

Feature/Option Android Android Version Linux Linux Version Test/Verify Steps Notes Product Link
PINE64 LCD Touchscreen (Screen/Touch) Yes/Yes No/No Maybe this will help get this working? 7-inch LCD Touch Screen Panel
Wireless

ROCKPro64 2×2 MIMO Dual Band WiFi 802.11AC / Bluetooth 4.2 Module (old) ROCKPro64 1x1 Dual Band WiFi 802.11AC / Bluetooth 5.0 Module (new)

Yes/Yes No/Yes* For the "new" ROCKPro64 WIFI module: Verified with Manjaro ARM (kernel 6.2.5). A config file ("firmware file") is needed at /lib/firmware/brcm/brcmfmac43455-sdio.txt. See #Getting wifi working ("new" wifi module) for the file contents and details. In 0.7.9 Ayufan linux releases this is deliberately disabled for stability reasons. On Manjaro ARM (kernel 6.2.5), WIFI seems to be stable with the firmware file. On a 5GHz network (802.11AC), it is possible to get about 120Mbps using the "new" ROCKPro64 WIFI module. ROCKPro64 1x1 Dual Band WiFi 802.11AC / Bluetooth 5.0 Module
USB OTG use this script: rockpro64_enable_otg.sh, then configure ip on usb0: ifconfig usb0 169.169.222.222 and run iperf, you should likely see about 200-300MB/s ROCKPro64#OTG_mode
USB Mass Storage USB2/USB3 Yes/yes Yes/Yes
Dedicated Fan Power (pwm1) Yes You might want to use ATS.
GPIO pins (raw or via RPI python scripts) Check out what Frank Mankel has done.
MIPI CSI Camera 1 and 2
eDP
HDMI Audio Yes 7.1.2 Yes 4.4.132-1083 - 4.4.138-1100 Stopped working in 4.4.154.1105. Ayufan is looking into it. This is working in Manjaro ARM (kernel 6.2.5). Select the Analog Output (Built-in Audio Stereo) option in the audio output device selection window (either use pavucontrol or the volume button in the KDE desktop). Despite the slightly misleading name, audio does go through the HDMI port. See here for details: https://forum.manjaro.org/t/no-hdmi-audio-on-rockpro64/25595/2.
3.5mm Audio/Mic
USB-C Host
Display via USB-C Yes 7.x and 8.x eDP via USB-C per tillim. No sound on Android 7.x. Sound does work on Android 8.x
ROCKPro64 PLAYBOX ENCLOSURE N/A N/A N/A Ventilation does not exist, thus requires manual changes to add venting. Case should be modified to account power adapter not being centered in cut holes. Opening the case once close without modifying it first is nearly impossible without special tools. Graphene heatsink is included and does well for Linux but not Android. ROCKPro64 Playbox Enclosure
ROCKPro64 30mm Tall Profile Heatsink N/A N/A N/A ROCKPro64 30 mm Tall-Profile Heatsink
ROCKPro64 20mm Mid Profile Heatsink N/A N/A N/A ROCKPro64 20 mm Mid-Profile Heatsink
Fan For ROCKPro64 20mm Mid Profile Heatsink N/A N/A N/A You might want to use fanctl to control the fan while keeping your CPU cool Fan For ROCKPro64 20 mm Mid-Profile Heatsink
HDMI output 4K@60Hz
PCI Express 2.1 The PCI Express interface of the RK3399 is limited to the Gen1 speed. As a result, some installed PCI Express devices may operate with degraded performance, such as M.2 SSDs that support fewer than four PCI Express lanes, installed using an adapter like this one.
Real Time Clock (RTC) battery backup RTC Backup Battery Holder CR2032
Boot from USB/PXE

RockChip themselves have tables of supported features at 4.4 and mainline kernel versions in their wiki here.

Board Information, Schematics and Certifications

Certifications:

  • Disclaimer: Please note that PINE64 SBC is not a "final" product and in general certification is not necessary. However, PINE64 still submit the SBC for FCC, CE, and ROHS certification and obtain the certificates to proof that SBC board is capable on passing the testing. Please note a final commercial product needs to performs its owns testing and obtains its owns certificates.
  • ROCKPro64 FCC Certificate
  • ROCKPro64 CE Certificate
  • ROCKPro64 RoHS Report

Datasheets for Components and Peripherals

Rockchip RK3399 SoC information:

LPDDR4 (200 Balls) SDRAM:

eMMC information:

SPI NOR Flash information:

Heatsink related info:

Wireless related info:

Ethernet related info:

Peripheral related info:

Remote control button mapping:

Audio Codec (ES8316) (under board):

PWM controlled fan, SPDIF, and RTC Battery Backup headers:

Useful Articles and Blog Posts

If you want to dive in to the ecosystem, here's a short list of various articles and blog posts that can help you set up your soft- or hardware development environment.

The NAS Case for the ROCKPro64

Front View of the PINE64 NAS Case for the ROCKPro64

Please follow this this link for detailed instructions on how to assemble the ROCKPro64 NAS Case.

The NAS Case instructions also contains detailed information about:

  • what the NAS Case ships with
  • What additional things you need to purchase for your NAS Case
  • What optional things you can consider purchasing for your NAS build
  • What OS Image we recommend you use for your NAS build
  • IO accessibility after installing the ROCKPro64 into the NAS Case
  • NAS Case Exploded View
  • NAS Case Drawing

3D printable ITX mounting brackets

A Quartz64 Model-A mounted in an ITX case using 3D printed brackets, which can also be used for the ROCKPro64

Allows mounting a ROCKPro64 or Quartz64 Model-A board inside a regular PC case that conforms to the ITX standard, using 3D printed brackets:

  • AMF/STL/STEP files plus the original FreeCAD file used to create the models File:RP64-A Q64-A to ITX mounting brackets.zip
  • Make sure to flip the two brackets by 180 degrees on one of the horizontal axes (X/Y) in your slicer of choice before printing to avoid unnecessary supports
  • To allow enough clearance between the board and the bracket you either need to print four copies of the washer model or add nut(s) between the board and the bracket
  • If using nuts for the clearance between the board and the brackets, make sure it creates at least 3.2mm of spacing in between
  • Depending on the accuracy and calibration of a 3D printer, slight deviation can occur and you likely need to manually widen some of the holes to allow screws to fit

Other Resources

Troubleshooting

No Video or GPU Acceleration on Debian

Note: This issue should be non-existent in newer versions of the Linux kernel, as well as in long-term support (LTS) kernels, with this upstream kernel commit that introduced the required module dependency.

If you can log in through serial but don't get any video or GPU acceleration on Debian, this is likely due to Debian's decision to compile the devfreq governors as loadable modules but not including them early enough for panfrost to be able to be provided with one of them.

The usual sign of this being the case is the following line in the kernel log: [drm:panfrost_devfreq_init [panfrost]] *ERROR* Couldn't initialize GPU devfreq

To fix this issue, run the following as root and reboot: 

echo governor_simpleondemand >> /etc/initramfs-tools/modules
update-initramfs -u -k $(uname -r)

PCIe probe failures on Linux kernel boot

While booting the Linux kernel, you might experience PCIe probe failures, which render the attached PCIe device inaccessible. The "drivers: pci: introduce configurable delay for Rockchip PCIe bus scan" thread on the Linux kernel mailing list (LKML) discusses this issue and proposes a fix.

Manjaro ARM applies the following patches to the kernel package, which fix the issue:

Retrieved from "https://wiki.pine64.org/index.php?title=ROCKPro64&oldid=21664"