Difference between revisions of "Pinebook Pro Software Releases"
Tortwigginum (talk | contribs) m (Fix missing OpenSUSE section) |
(Add note about SkiffOS buildroot build script for PineBook Pro) |
||
(48 intermediate revisions by 12 users not shown) | |||
Line 1: | Line 1: | ||
= OS Image Releases = | = Linux OS Image Releases = | ||
For information on how to install these images onto your device, please see the [[NOOB]] Page, which includes information on writing images to the device | For information on how to install these images onto your device, please see the [[NOOB]] Page, which includes information on writing images to the device eMMC or an SD card. | ||
If Manjaro is installed on the eMMC you may experience issues booting different installations from SD card. [https://gitlab.manjaro.org/snippets/490 List of known affected distros and workaround]. | |||
== elementary OS == | |||
[[File:elementaryLogo.png|right|100px]] | |||
=== elementary OS 6 [microSD/eMMC boot] === | |||
* Full version of elementary OS optimized for Pinebook Pro | |||
* Experimental [https://builds.elementary.io/ “Early Access” build of elementary OS 6] (which has not been released as stable) | |||
** Size: ~1.2 GB (varies since images are built daily) | |||
* Polished first-run setup which helps you create a user before logging in | |||
* Downloading, installation, etc. details at the [https://github.com/elementary/os/wiki/Pinebook-Pro elementary OS Wiki] | |||
==Kali Linux== | |||
[[File:Kali.jpeg|right|100px]] | |||
=== Kali Linux prebuilt OS images for Pinebook Pro [SD/eMMC boot]=== | |||
* Official pre-built OS images of Kali Linux for the Pinebook Pro featuring all tools you'd expect from the distribution. | |||
* DD image (for 8GB microSD card /16GB eMMC module and above): | |||
** [https://www.offensive-security.com/kali-linux-arm-images/ Direct download latest images from Offensive Security's website] | |||
** size: 2.0GB | |||
* Login with | |||
** username: kali | |||
** password: kali | |||
== Arch Linux == | == Arch Linux == | ||
[[File:Archlinux-logo.png|right|100px]] | [[File:Archlinux-logo.png|right|100px]] | ||
=== Arch Linux | === Arch Linux ARM install image [microSD/USB Boot] === | ||
* | * archiso image customized for Arch Linux ARM on the Pinebook Pro | ||
* DD image (for | * DD image (for 1GB or larger microSD card/USB stick): | ||
** [https://github.com/ | ** [https://github.com/nadiaholmquist/archiso-pbp/releases Direct download for latest releases from GitHub] | ||
** | ** size: 579MB | ||
* Automatic login as root | |||
* Make sure to thoroughly read the [https://github.com/nadiaholmquist/archiso-pbp/blob/master/README.md readme] and [https://github.com/nadiaholmquist/archiso-pbp/blob/master/FAQ.md FAQ], otherwise follow the normal Arch installation guide. | |||
== Manjaro ARM == | |||
[[File:Manjaro.png|right|100px]] | |||
* The Manjaro project offers a mainline kernel with patches and modules to support PBPro hardware in two flavors. Both provide DD images and installer images (DD to SD card which will then install to eMMC when booted). | |||
* To learn more about Manjaro please visit [https://forum.manjaro.org/tags/manjaroarm Manjaro Forum] | |||
* You can follow the ongoing discussion about Twister OS on the PINE64 forum (https://forum.pine64.org/showthread.php?tid=8207) | |||
=== Manjaro ARM with KDE (Plasma) desktop [microSD / eMMC Boot] === | |||
* [https://manjaro.org/downloads/arm/pinebook-pro/arm8-pinebook-pro-kde-plasma/ Direct download from Manjaro] (microSD image only) | |||
* [https://osdn.net/projects/manjaro-arm/storage/pbpro/kde-plasma/ Direct download from osdn.net] (both microSD and emmc-installer images) | |||
=== Manjaro ARM with GTK (XFCE) desktop [microSD / eMMC Boot] === | |||
* [https://manjaro.org/downloads/arm/pinebook-pro/arm8-pinebook-pro-xfce/ Direct download from Manjaro] | |||
* [https://osdn.net/projects/manjaro-arm/storage/pbpro/xfce/ Direct download from osdn.net] | |||
=== Manjaro ARM with i3 tiling window manager [microSD / eMMC Boot] === | |||
* [https://manjaro.org/downloads/arm/pinebook-pro/arm8-pinebook-pro-i3/ Direct download from Manjaro] | |||
* [https://osdn.net/projects/manjaro-arm/storage/pbpro/i3/ Direct download from osdn.net] | |||
=== Manjaro ARM with Sway tiling window manager [microSD / eMMC Boot] === | |||
* [https://osdn.net/projects/manjaro-arm/storage/pbpro/sway/ Direct download from osdn.net] | |||
=== Manjaro ARM installer === | |||
The [https://gitlab.manjaro.org/manjaro-arm/applications/manjaro-arm-installer manjaro-arm-installer] script is intended to install Manjaro ARM directly to SD/eMMC cards without the need for images (including LXQT, Mate & CuboCore editions, as well as full disk encryption). Running on a Linux x86 computer, it can install Manjaro ARM directly to an empty eMMC using an eMMC to USB adapter. The script can also be run from SD to install an image to the eMMC. | |||
== OpenSUSE == | |||
[[File:Opensuse1.png|right|100px]] | |||
=== OpenSUSE XFCE OS Image [microSD / eMMC Boot] === | |||
* This image contains an install of openSUSE tumbleweed with XFCE desktop environment. | |||
* To learn more about OpenSUSE please visit the [https://www.opensuse.org/ official website]. | |||
* Pinebook Pro build instructions can be found [https://github.com/smithmcgriff/opensuse-on-pinebookpro-gnome here] | |||
* DD image (for 16GB microSD card / eMMC module and above) | |||
** [https://sourceforge.net/projects/opensuse-on-pinebookpro/files/Rel_1/ Direct download latest release build from SourceForge] | |||
* login with: | |||
** username: root | |||
** password: linux | |||
=== OpenSUSE GNOME 3 OS Image [microSD / eMMC Boot] === | |||
* This image contains an install of openSUSE tumbleweed with GNOME 3 desktop environment. | |||
* To learn more about OpenSUSE please visit the [https://www.opensuse.org/ official website]. | |||
* Pinebook Pro build instructions can be found [https://github.com/smithmcgriff/opensuse-on-pinebookpro-gnome here] | |||
* DD image (for 16GB microSD card / eMMC module and above) | |||
** [https://sourceforge.net/projects/opensuse-on-pinebookpro/files/Rel_1/ Direct download latest release build from SourceForge] | |||
* login with: | |||
** username: tux | |||
** password: susepassword | |||
== Fedora == | |||
[[File:fedora1.png|right|100px]] | |||
=== Fedora 32 Cinnamon Desktop OS Image [microSD / eMMC Boot] === | |||
* This image contains an install of Fedora with [https://cinnamon-spices.linuxmint.com/ Cinnamon] desktop environment. | |||
* To learn more about Fedora please visit the [https://getfedora.org/ official website]. | |||
* DD image (for 12GB microSD card / eMMC module and above) | |||
** [https://builds.armdevelopers.com/pinebook-pro/releases/dev/Fedora32-Cinnamon-Desktop-202009.0.pinebook-pro.img.xz Fedora 32 Pinebook Pro Image] | |||
* login with: | |||
** username: root | |||
** password: fedora | |||
=== Fedora 32 KDE Desktop OS Image [microSD / eMMC Boot] === | |||
* This image contains an install of Fedora with [https://kde.org/ KDE aka Plasma] desktop environment. | |||
* To learn more about Fedora please visit the [https://getfedora.org/ official website]. | |||
* DD image (for 12GB microSD card / eMMC module and above) | |||
** [https://builds.armdevelopers.com/pinebook-pro/releases/dev/Fedora32-KDE-Desktop-202009.0.pinebook-pro.img.xz Fedora 32 Pinebook Pro Image] | |||
* login with: | |||
** username: root | |||
** password: fedora | |||
=== Fedora 32 Xfce Desktop OS Image [microSD / eMMC Boot] === | |||
* This image contains an install of Fedora with [https://xfce.org/ xfce] desktop environment. | |||
* To learn more about Fedora please visit the [https://getfedora.org/ official website]. | |||
* DD image (for 12GB microSD card / eMMC module and above) | |||
** [https://builds.armdevelopers.com/pinebook-pro/releases/dev/Fedora32-Xfce-Desktop-202009.0.pinebook-pro.img.xz Fedora 32 Pinebook Pro Image] | |||
* login with: | |||
** username: root | |||
** password: fedora | |||
=== Fedora 32 Workstation OS Image [microSD / eMMC Boot] === | |||
* This image contains an install of Fedora with [https://www.gnome.org/gnome-3/ GNOME 3] desktop environment. | |||
* To learn more about Fedora please visit the [https://getfedora.org/ official website]. | |||
* DD image (for 12GB microSD card / eMMC module and above) | |||
** [https://builds.armdevelopers.com/pinebook-pro/releases/dev/Fedora32-Workstation-202009.0.pinebook-pro.img.xz Fedora 32 Pinebook Pro Image] | |||
* login with: | |||
** username: root | |||
** password: fedora | |||
== Armbian == | |||
[[File:armbian.png|right|100px]] | |||
* To find out more about Armbian and available options please visit their [https://www.armbian.com/pinebook-pro/ site] | |||
* DD image to microSD card or eMMC module and boot. Highly recommend using [https://etcher.io/ Etcher] | |||
=== Armbian Ubuntu Focal XFCE Desktop mainline kernel [microSD / eMMC Boot] === | |||
* Armbian provides a mainline kernel build images for Ubuntu Focal with XFCE Desktop | |||
* DD image (for 8GB micoSD card or eMMC Module and above) | |||
** [https://dl.armbian.com/pinebook-pro/Focal_current_desktop Armbian's Pinebook Pro Ubuntu Focal XFCE Desktop download site] | |||
=== Armbian Ubuntu Focal XFCE Desktop legacy kernel [microSD / eMMC Boot] === | |||
* Armbian provides a legacy kernel 4.4 build images for Ubuntu Focal with XFCE Desktop | |||
* DD image (for 8GB microSD card or eMMC Module and above) | |||
** [https://dl.armbian.com/pinebook-pro/Focal_legacy_desktop Armbian's Pinebook Pro Ubuntu Focal XFCE Desktop download site] | |||
=== Armbian Debian Buster XFCE Desktop legacy kernel [microSD / eMMC Boot] === | |||
* Armbian provides a legacy kernel 4.4 build images for Debian Buster with XFCE Desktop | |||
* DD image (for 8GB micoSD card or eMMC Module and above) | |||
** [https://dl.armbian.com/pinebook-pro/Buster_legacy_desktop Armbian's Pinebook Pro Debian Buster XFCE Desktop download site] | |||
=== Armbian Ubuntu Bionic XFCE Desktop legacy kernel [microSD / eMMC Boot] === | |||
* Armbian provides a legacy kernel 4.4 build images for Ubuntu Bionic with XFCE Desktop | |||
* DD image (for 8GB micoSD card or eMMC Module and above) | |||
** [https://dl.armbian.com/pinebook-pro/Bionic_legacy_desktop Armbian's Pinebook Pro Ubuntu Bionic XFCE Desktop download site] | |||
== AOSC == | |||
[[File:aosc.png|right|100px]] | |||
* To learn more about AOSC, please visit the official [https://aosc.io/ AOSC website] | |||
* AOSC using LZ4 compression algorithm, please visit the [https://github.com/lz4/lz4 LZ4 github site] for utility | |||
* 8GB microSD card or eMMC module and above | |||
* Login with | * Login with | ||
** username: | ** username: aosc | ||
** password: | ** password: anthon | ||
=== AOSC KDE Community Build Image [microSD and eMMC Boot] === | |||
* [https://releases.aosc.io/os-arm64/rockchip64/kde/pinebook-pro/ Direct download from AOSC] | |||
=== AOSC GNOME Community Build Image [microSD and eMMC Boot] === | |||
* [https://releases.aosc.io/os-arm64/rockchip64/gnome/pinebook-pro/ Direct download from AOSC] | |||
=== AOSC MATE Community Build Image [microSD and eMMC Boot] === | |||
* [https://releases.aosc.io/os-arm64/rockchip64/mate/pinebook-pro/ Direct download from AOSC] | |||
=== AOSC Cinnamon Community Build Image [microSD and eMMC Boot] === | |||
* [https://releases.aosc.io/os-arm64/rockchip64/cinnamon/pinebook-pro/ Direct download from AOSC] | |||
=== AOSC XFCE Community Build Image [microSD and eMMC Boot] === | |||
* [https://releases.aosc.io/os-arm64/rockchip64/xfce/pinebook-pro/ Direct download from AOSC] | |||
=== AOSC LXDE Community Build Image [microSD and eMMC Boot] === | |||
* [https://releases.aosc.io/os-arm64/rockchip64/lxde/pinebook-pro/ Direct download from AOSC] | |||
== Twister OS == | |||
[[File:Twister_OS.png|right|100px]] | |||
=== Twister OS Armbian-Reforged XFCE Dsktop beta images [SD boot]=== | |||
* For more infomation on Twister OS, please visit this {https://twisteros.com/ official site] | |||
* You can follow the ongoing discussion about Twister OS on the PINE64 forum (https://forum.pine64.org/showthread.php?tid=12192) | |||
* After flashing image with Etcher, edit /boot/armbianEnv.txt, replace the dtb name with rk3399-pinebook-pro.dtb. | |||
* DD image (for 16GB microSD card /16GB eMMC module and above): | |||
** [https://twisteros.com/twisterarmbian.html Direct download latest images from Twister OS's website] | |||
** size: 2.8GB | |||
* Login with | |||
** password: asdasd | |||
=== Twister OS Monka-Manjaro XFCE Dsktop beta images [SD boot]=== | |||
* For more infomation on Twister OS, please visit this {https://twisteros.com/ official site] | |||
* You can follow the ongoing discussion about Twister OS on the PINE64 forum (https://forum.pine64.org/showthread.php?tid=12192) | |||
* After flashing image with Etcher, edit /boot/armbianEnv.txt, replace the dtb name with rk3399-pinebook-pro.dtb. | |||
* DD image (for 16GB microSD card /16GB eMMC module and above): | |||
** [https://drive.google.com/file/d/1I0yHIDfezqnz1jdphJ4gooWbGtNw0ArW/view?usp=sharing Direct download latest images from Google Drive] | |||
** size: 8.9GB | |||
* Login with | |||
** username: pi | |||
** password: root | |||
== Debian Desktop == | == Debian Desktop == | ||
Line 28: | Line 229: | ||
** password: rock | ** password: rock | ||
== Focal MATE / GNOME == | == Ubuntu 20.04 Focal Fossa MATE / GNOME == | ||
[[File:UbuntuLogo.png|right|100px]] | [[File:UbuntuLogo.png|right|100px]] | ||
=== Focal MATE and GNOME Community Builds [microSD/ eMMC Boot] by ayufan === | === Ubuntu 20.04 Focal Fossa MATE and GNOME Community Builds [microSD/ eMMC Boot] by ayufan === | ||
* Desktop Images featurng a standard Ubuntu suite of software to get you started. | * Desktop Images featurng a standard Ubuntu suite of software to get you started. | ||
* DD image (for 8GB | * DD image (for 8GB microSD card /16GB eMMC module and above): | ||
** [https://github.com/ayufan-rock64/linux-build/releases Direct download for latests releases and pre-releases on ayufan's github] | ** [https://github.com/ayufan-rock64/linux-build/releases Direct download for latests releases and pre-releases on ayufan's github] | ||
** size: 1.06GB | ** size: 1.06GB | ||
* Login with | * Login with | ||
** username: rock64 | ** username: rock64 | ||
** password: | ** password: rock64 (must be changed on initial boot) | ||
== Bionic LXDE == | == Ubuntu 18.04 Bionic Beaver LXDE == | ||
[[File:lxde.png|right|100px]] | [[File:lxde.png|right|100px]] | ||
=== Bionic LXDE Community Build Image by ayufan [microSD and eMMC Boot] === | === Ubuntu 18.04 Bionic Beaver LXDE Community Build Image by ayufan [microSD and eMMC Boot] === | ||
* Included LXDE Desktop, Firefox Browser, and LibreOffice Suite | * Included LXDE Desktop, Firefox Browser, and LibreOffice Suite | ||
* DD image (for 8GB | * DD image (for 8GB microSD card /16GB eMMC module and above): | ||
** [https://github.com/ayufan-rock64/linux-build/releases/download/0.9.14/bionic-lxde-pinebookpro-0.9.14-1159-armhf.img.xz Direct download release build 0.9.14 from ayufan's github] | ** [https://github.com/ayufan-rock64/linux-build/releases/download/0.9.14/bionic-lxde-pinebookpro-0.9.14-1159-armhf.img.xz Direct download release build 0.9.14 from ayufan's github] | ||
** MD5 (XZ file): B74E8366615DAE89AEB5CC878F2B316B | ** MD5 (XZ file): B74E8366615DAE89AEB5CC878F2B316B | ||
Line 58: | Line 259: | ||
=== Bionic Mate Community Build Image [microSD Boot] by ayufan === | === Bionic Mate Community Build Image [microSD Boot] by ayufan === | ||
* Included Mate Desktop, Firefox Browser, and LibreOffice Suite | * Included Mate Desktop, Firefox Browser, and LibreOffice Suite | ||
* DD image (for 8GB | * DD image (for 8GB microSD card / 16GB eMMC module and above): | ||
** [https://github.com/ayufan-rock64/linux-build/releases/download/0.9.14/bionic-mate-pinebookpro-0.9.14-1159-armhf.img.xz Direct download release build 0.9.14 from ayufan's github] | ** [https://github.com/ayufan-rock64/linux-build/releases/download/0.9.14/bionic-mate-pinebookpro-0.9.14-1159-armhf.img.xz Direct download release build 0.9.14 from ayufan's github] | ||
** MD5 (XZ file): 5F60494B9248570FAF5853860A26B489 | ** MD5 (XZ file): 5F60494B9248570FAF5853860A26B489 | ||
Line 66: | Line 267: | ||
** password: rock64 | ** password: rock64 | ||
== postmarketOS == | == postmarketOS == | ||
Line 113: | Line 273: | ||
===Official postmarketOS build [microSD/ eMMC Boot] === | ===Official postmarketOS build [microSD/ eMMC Boot] === | ||
* Official postmarketOS build with the GNOME desktop for the Pinebook Pro. | * Official postmarketOS build with the GNOME desktop for the Pinebook Pro. | ||
* DD image (for 8GB | * DD image (for 8GB microSD card /16GB eMMC module and above): | ||
** [http://images.postmarketos.org/pinebookpro/ Direct download latest images from postmarketOS] | ** [http://images.postmarketos.org/pinebookpro/ Direct download latest images from postmarketOS] | ||
** size: 400MB | ** size: 400MB | ||
Line 119: | Line 279: | ||
** username: demo | ** username: demo | ||
** password: demo OR 147147 | ** password: demo OR 147147 | ||
== Q4OS == | == Q4OS == | ||
Line 126: | Line 287: | ||
* Q4OS is advertised as a 'fast and powerful operating system based on the latest technologies while offering highly productive desktop environment' | * Q4OS is advertised as a 'fast and powerful operating system based on the latest technologies while offering highly productive desktop environment' | ||
* To learn more please visit the [https://forum.pine64.org/showthread.php?tid=8385 PINE64 forum] or official [https://q4os.org/index.html Q4OS website] | * To learn more please visit the [https://forum.pine64.org/showthread.php?tid=8385 PINE64 forum] or official [https://q4os.org/index.html Q4OS website] | ||
* DD image (for 8GB | * DD image (for 8GB microSD card / eMMC module and above) | ||
** [https://sourceforge.net/projects/q4os/files/testing/ Direct download latest release build from SourceForge] | ** [https://sourceforge.net/projects/q4os/files/testing/ Direct download latest release build from SourceForge] | ||
* User account and password are created on first run | * User account and password are created on first run | ||
== | ==Recalbox== | ||
[[File: | [[File:RB.png|right|100px]] | ||
=== | === Recalbox for Pinebook Pro [SD/eMMC boot]=== | ||
* | * Recalbox is a retrogaming Linux distribution allowing for emulation of all classic videogame systems. | ||
* DD image (for 8GB microSD card /16GB eMMC module and above): | |||
** [https://github.com/mrfixit2001/recalbox-rockchip/releases Direct download latest images from MrFixit's gitbub] | |||
* DD image (for | ** size: 450MB | ||
* SSH Login | |||
** username: root | |||
** password: recalboxroot | |||
** | |||
** | |||
* | |||
** username: | |||
** password: | |||
== | = BSD OS Image Release = | ||
==NetBSD== | ==NetBSD== | ||
Line 198: | Line 325: | ||
* ARM64 images, (including support for Pinebook Pro), can be found here [https://www.openbsd.org/arm64.html OpenBSD arm64] | * ARM64 images, (including support for Pinebook Pro), can be found here [https://www.openbsd.org/arm64.html OpenBSD arm64] | ||
= Chromium OS Image Release = | |||
== | == FydeOS == | ||
[[File: | [[File:FydeOS.png|right|100px]] | ||
To learn more about FydeOS please visit [https://releases.fydeos.io/11.2/pinebook-pro] | |||
* You can follow the ongoing discussion about FydeOS on the PINE64 forum (https://forum.pine64.org/showthread.php?tid=12201) | |||
* DD image to microSD card or eMMC module. Highly recommend using [https://etcher.io/ Etcher] | |||
** [https://fydeos.com/download/ Direct download latest release build from FydeOS by select "FydeOS for You Pinebook Pro"] | |||
== ChromiumOS Community Build Image by ayufan [microSD and eMMC Boot] == | |||
[[File:chromium.jpg|right|100px]] | |||
* DD image (for 8GB microSD card/16GB eMMC module and above) | |||
** [https://github.com/ayufan-rock64/chromiumos-build/releases/download/R77-12371.7.104.g78f88d6/chromiumos-rockpro64-R77-12371.7.104.g78f88d6.img.xz Direct download R77 build from ayufan's github] | |||
** MD5 (XZ file): 7B747B6D2B041C5C0C6434DDB524DB66 | |||
** size: 387MB | |||
= Android Image Releases = | = Android Image Releases = | ||
== Android 7.1 microSD == | == Android 7.1 microSD == | ||
[[File:android_7.png|right|100px]] | [[File:android_7.png|right|100px]] | ||
Line 237: | Line 353: | ||
=== Stock Android for DD method [micro SD Boot] [20190918] === | === Stock Android for DD method [micro SD Boot] [20190918] === | ||
* Production floor testing image | * Production floor testing image | ||
* | * Use 'dd' to write the image to the microSD card and boot. Using [https://www.balena.io/etcher/ Etcher] or another specialized SD writing tool is preferred. | ||
* Please allow 3-5 minutes boot up time on first time for initialization | * Please allow 3-5 minutes boot up time on first time for initialization | ||
* DD image for 8GB microSD card | * DD image for 8GB microSD card | ||
Line 302: | Line 417: | ||
* No graphical display yet, works only through serial console | * No graphical display yet, works only through serial console | ||
* Requires adding the non-free component to your /etc/apt/sources.list file and installing the "firmware-linux" package for Wi-Fi and Bluetooth support | * Requires adding the non-free component to your /etc/apt/sources.list file and installing the "firmware-linux" package for Wi-Fi and Bluetooth support | ||
* Installer is loaded into RAM, can install onto the same media | * Installer is loaded into RAM, can install onto the same media from which it’s booted | ||
* Supports automatic partitioning and full disk encryption through LVM | * Supports automatic partitioning and full disk encryption through LVM | ||
* Installer currently doesn't install the bootloader, leaving the installed system in an unbootable state until it's manually added | * Installer currently doesn't install the bootloader, leaving the installed system in an unbootable state until it's manually added | ||
Line 309: | Line 424: | ||
The official images are '''not''' recommended yet until the display begins working and the installer properly installs the bootloader. Most users will want to see [[Pinebook Pro Debian Installer|Daniel Thompson's Debian Installer]] instead. | The official images are '''not''' recommended yet until the display begins working and the installer properly installs the bootloader. Most users will want to see [[Pinebook Pro Debian Installer|Daniel Thompson's Debian Installer]] instead. | ||
== Gentoo Script == | == Gentoo Script == | ||
[[File: | [[File:GentooLogo.png|right|100px]] | ||
=== Gentoo Script for Pinebook Pro === | === Gentoo Script for Pinebook Pro === | ||
* This is a script that prepares a Gentoo arm64 stage 3 tarball for the Pinebook Pro | * This is a script that prepares a Gentoo arm64 stage 3 tarball for the Pinebook Pro | ||
** The script takes care of device specifics like an optimized make.conf, an overlay that provides | ** The script takes care of device specifics like an optimized make.conf, an overlay that provides kernel and firmware amongst others, and other miscellaneous fixes | ||
* The usual tarball setup as per [https://wiki.gentoo.org/wiki/Handbook:AMD64 Gentoo Handbook] is left to the user. | * The usual tarball setup as per [https://wiki.gentoo.org/wiki/Handbook:AMD64 Gentoo Handbook] is left to the user. | ||
* Forum thread with instructions at https://forum.pine64.org/showthread.php?tid=8765 | * Forum thread with instructions at https://forum.pine64.org/showthread.php?tid=8765 | ||
==Kali Script== | ==Kali Script== | ||
Line 325: | Line 442: | ||
* This is a script to create official Kali Linux OS images for the Pinebook Pro | * This is a script to create official Kali Linux OS images for the Pinebook Pro | ||
** The script carries out the build process in entirety and is Pinebook Pro specific | ** The script carries out the build process in entirety and is Pinebook Pro specific | ||
* Please pull the | * Please pull the latest [https://gitlab.com/kalilinux/build-scripts/kali-arm/blob/master/pinebook-pro.sh Kali Linux install script] from the project's GitLab. | ||
* For more information regarding building the OS image please read the README instruction at https://gitlab.com/kalilinux/build-scripts/kali-arm/blob/master/README.md | * For more information regarding building the OS image please read the README instruction at https://gitlab.com/kalilinux/build-scripts/kali-arm/blob/master/README.md | ||
==K1ss OS Script== | |||
[[File:K1ss.png|right|100px]] | |||
=== K1ss Linux for Pinebook Pro === | |||
* This is a repository containing an unofficial port of KISS Linux to aarch64. The tarball is built for generic aarch64, currently being tested on the Pinebook Pro. | |||
* Please pull the latest [https://github.com/jedavies-dev/kiss-aarch64 K1ss Linux install script] from the project's GitHub. | |||
* * You can follow the ongoing discussion about K1ss Linux on the PINE64 forum (https://forum.pine64.org/showthread.php?tid=9304) | |||
==NixOS Script== | |||
[[File:nixos.png|right|100px]] | |||
=== NixOS for Pinebook Pro === | |||
* This is instructions to install NixOS on the Pinebook: https://nixos.wiki/wiki/NixOS_on_ARM/PINE64_Pinebook | |||
* Please pull the latest [https://github.com/samueldr/wip-pinebook-pro samueldr's repository ] from the project's GitHub. | |||
* * You can follow the ongoing discussion about NixOS on the PINE64 forum (https://forum.pine64.org/showthread.php?tid=10524) | |||
==SkiffOS / Buildroot Script== | |||
[[File:SkiffOS-Icon-1.png|right|100px]] | |||
=== SkiffOS for Pinebook Pro === | |||
* Instructions to build/install on the Pinebook Pro: https://github.com/skiffos/SkiffOS/tree/master/configs/pine64/book | |||
* Please pull the latest version from the project's GitHub. | |||
[[Category:PineBook Pro]] |
Revision as of 04:28, 14 January 2021
Linux OS Image Releases
For information on how to install these images onto your device, please see the NOOB Page, which includes information on writing images to the device eMMC or an SD card.
If Manjaro is installed on the eMMC you may experience issues booting different installations from SD card. List of known affected distros and workaround.
elementary OS
elementary OS 6 [microSD/eMMC boot]
- Full version of elementary OS optimized for Pinebook Pro
- Experimental “Early Access” build of elementary OS 6 (which has not been released as stable)
- Size: ~1.2 GB (varies since images are built daily)
- Polished first-run setup which helps you create a user before logging in
- Downloading, installation, etc. details at the elementary OS Wiki
Kali Linux
Kali Linux prebuilt OS images for Pinebook Pro [SD/eMMC boot]
- Official pre-built OS images of Kali Linux for the Pinebook Pro featuring all tools you'd expect from the distribution.
- DD image (for 8GB microSD card /16GB eMMC module and above):
- Login with
- username: kali
- password: kali
Arch Linux
Arch Linux ARM install image [microSD/USB Boot]
- archiso image customized for Arch Linux ARM on the Pinebook Pro
- DD image (for 1GB or larger microSD card/USB stick):
- Direct download for latest releases from GitHub
- size: 579MB
- Automatic login as root
- Make sure to thoroughly read the readme and FAQ, otherwise follow the normal Arch installation guide.
Manjaro ARM
- The Manjaro project offers a mainline kernel with patches and modules to support PBPro hardware in two flavors. Both provide DD images and installer images (DD to SD card which will then install to eMMC when booted).
- To learn more about Manjaro please visit Manjaro Forum
- You can follow the ongoing discussion about Twister OS on the PINE64 forum (https://forum.pine64.org/showthread.php?tid=8207)
Manjaro ARM with KDE (Plasma) desktop [microSD / eMMC Boot]
- Direct download from Manjaro (microSD image only)
- Direct download from osdn.net (both microSD and emmc-installer images)
Manjaro ARM with GTK (XFCE) desktop [microSD / eMMC Boot]
Manjaro ARM with i3 tiling window manager [microSD / eMMC Boot]
Manjaro ARM with Sway tiling window manager [microSD / eMMC Boot]
Manjaro ARM installer
The manjaro-arm-installer script is intended to install Manjaro ARM directly to SD/eMMC cards without the need for images (including LXQT, Mate & CuboCore editions, as well as full disk encryption). Running on a Linux x86 computer, it can install Manjaro ARM directly to an empty eMMC using an eMMC to USB adapter. The script can also be run from SD to install an image to the eMMC.
OpenSUSE
OpenSUSE XFCE OS Image [microSD / eMMC Boot]
- This image contains an install of openSUSE tumbleweed with XFCE desktop environment.
- To learn more about OpenSUSE please visit the official website.
- Pinebook Pro build instructions can be found here
- DD image (for 16GB microSD card / eMMC module and above)
- login with:
- username: root
- password: linux
OpenSUSE GNOME 3 OS Image [microSD / eMMC Boot]
- This image contains an install of openSUSE tumbleweed with GNOME 3 desktop environment.
- To learn more about OpenSUSE please visit the official website.
- Pinebook Pro build instructions can be found here
- DD image (for 16GB microSD card / eMMC module and above)
- login with:
- username: tux
- password: susepassword
Fedora
Fedora 32 Cinnamon Desktop OS Image [microSD / eMMC Boot]
- This image contains an install of Fedora with Cinnamon desktop environment.
- To learn more about Fedora please visit the official website.
- DD image (for 12GB microSD card / eMMC module and above)
- login with:
- username: root
- password: fedora
Fedora 32 KDE Desktop OS Image [microSD / eMMC Boot]
- This image contains an install of Fedora with KDE aka Plasma desktop environment.
- To learn more about Fedora please visit the official website.
- DD image (for 12GB microSD card / eMMC module and above)
- login with:
- username: root
- password: fedora
Fedora 32 Xfce Desktop OS Image [microSD / eMMC Boot]
- This image contains an install of Fedora with xfce desktop environment.
- To learn more about Fedora please visit the official website.
- DD image (for 12GB microSD card / eMMC module and above)
- login with:
- username: root
- password: fedora
Fedora 32 Workstation OS Image [microSD / eMMC Boot]
- This image contains an install of Fedora with GNOME 3 desktop environment.
- To learn more about Fedora please visit the official website.
- DD image (for 12GB microSD card / eMMC module and above)
- login with:
- username: root
- password: fedora
Armbian
- To find out more about Armbian and available options please visit their site
- DD image to microSD card or eMMC module and boot. Highly recommend using Etcher
Armbian Ubuntu Focal XFCE Desktop mainline kernel [microSD / eMMC Boot]
- Armbian provides a mainline kernel build images for Ubuntu Focal with XFCE Desktop
- DD image (for 8GB micoSD card or eMMC Module and above)
Armbian Ubuntu Focal XFCE Desktop legacy kernel [microSD / eMMC Boot]
- Armbian provides a legacy kernel 4.4 build images for Ubuntu Focal with XFCE Desktop
- DD image (for 8GB microSD card or eMMC Module and above)
Armbian Debian Buster XFCE Desktop legacy kernel [microSD / eMMC Boot]
- Armbian provides a legacy kernel 4.4 build images for Debian Buster with XFCE Desktop
- DD image (for 8GB micoSD card or eMMC Module and above)
Armbian Ubuntu Bionic XFCE Desktop legacy kernel [microSD / eMMC Boot]
- Armbian provides a legacy kernel 4.4 build images for Ubuntu Bionic with XFCE Desktop
- DD image (for 8GB micoSD card or eMMC Module and above)
AOSC
- To learn more about AOSC, please visit the official AOSC website
- AOSC using LZ4 compression algorithm, please visit the LZ4 github site for utility
- 8GB microSD card or eMMC module and above
- Login with
- username: aosc
- password: anthon
AOSC KDE Community Build Image [microSD and eMMC Boot]
AOSC GNOME Community Build Image [microSD and eMMC Boot]
AOSC MATE Community Build Image [microSD and eMMC Boot]
AOSC Cinnamon Community Build Image [microSD and eMMC Boot]
AOSC XFCE Community Build Image [microSD and eMMC Boot]
AOSC LXDE Community Build Image [microSD and eMMC Boot]
Twister OS
Twister OS Armbian-Reforged XFCE Dsktop beta images [SD boot]
- For more infomation on Twister OS, please visit this {https://twisteros.com/ official site]
- You can follow the ongoing discussion about Twister OS on the PINE64 forum (https://forum.pine64.org/showthread.php?tid=12192)
- After flashing image with Etcher, edit /boot/armbianEnv.txt, replace the dtb name with rk3399-pinebook-pro.dtb.
- DD image (for 16GB microSD card /16GB eMMC module and above):
- Login with
- password: asdasd
Twister OS Monka-Manjaro XFCE Dsktop beta images [SD boot]
- For more infomation on Twister OS, please visit this {https://twisteros.com/ official site]
- You can follow the ongoing discussion about Twister OS on the PINE64 forum (https://forum.pine64.org/showthread.php?tid=12192)
- After flashing image with Etcher, edit /boot/armbianEnv.txt, replace the dtb name with rk3399-pinebook-pro.dtb.
- DD image (for 16GB microSD card /16GB eMMC module and above):
- Direct download latest images from Google Drive
- size: 8.9GB
- Login with
- username: pi
- password: root
Debian Desktop
Debian Desktop Community Build Image [microSD to eMMC] by mrfixit2001
- This was previously the default operating system for the Pinebook Pro
- Includes desktop, Firefox browser, and LibreOffice
- DD image (for 8GB microSD card / 16GB eMMC module and above):
- Direct download release build 191226 from mrfixit2001's github
- MD5 (img file): 59838c1518b8b6da86a00d38b31ae904
- File Size: 1.19GB
- Direct download release build 191226 from mrfixit2001's github
- Login with
- username: rock
- password: rock
Ubuntu 20.04 Focal Fossa MATE / GNOME
Ubuntu 20.04 Focal Fossa MATE and GNOME Community Builds [microSD/ eMMC Boot] by ayufan
- Desktop Images featurng a standard Ubuntu suite of software to get you started.
- DD image (for 8GB microSD card /16GB eMMC module and above):
- Login with
- username: rock64
- password: rock64 (must be changed on initial boot)
Ubuntu 18.04 Bionic Beaver LXDE
Ubuntu 18.04 Bionic Beaver LXDE Community Build Image by ayufan [microSD and eMMC Boot]
- Included LXDE Desktop, Firefox Browser, and LibreOffice Suite
- DD image (for 8GB microSD card /16GB eMMC module and above):
- Direct download release build 0.9.14 from ayufan's github
- MD5 (XZ file): B74E8366615DAE89AEB5CC878F2B316B
- size: 763MB
- Login with
- username: rock64
- password: rock64
Bionic Mate
Bionic Mate Community Build Image [microSD Boot] by ayufan
- Included Mate Desktop, Firefox Browser, and LibreOffice Suite
- DD image (for 8GB microSD card / 16GB eMMC module and above):
- Direct download release build 0.9.14 from ayufan's github
- MD5 (XZ file): 5F60494B9248570FAF5853860A26B489
- size: 1.06GB
- Login with
- username: rock64
- password: rock64
postmarketOS
Official postmarketOS build [microSD/ eMMC Boot]
- Official postmarketOS build with the GNOME desktop for the Pinebook Pro.
- DD image (for 8GB microSD card /16GB eMMC module and above):
- Direct download latest images from postmarketOS
- size: 400MB
- Login with
- username: demo
- password: demo OR 147147
Q4OS
Q4OS Test Build Image [microSD / eMMC Boot]
- Q4OS is advertised as a 'fast and powerful operating system based on the latest technologies while offering highly productive desktop environment'
- To learn more please visit the PINE64 forum or official Q4OS website
- DD image (for 8GB microSD card / eMMC module and above)
- User account and password are created on first run
Recalbox
Recalbox for Pinebook Pro [SD/eMMC boot]
- Recalbox is a retrogaming Linux distribution allowing for emulation of all classic videogame systems.
- DD image (for 8GB microSD card /16GB eMMC module and above):
- SSH Login
- username: root
- password: recalboxroot
BSD OS Image Release
NetBSD
NetBSD [microSD /eMMC Boot]
- To learn more about NetBSD please visit NetBSD main page
- DD image to microSD card or eMMC module. Highly recommend using Etcher
- Console and SSH default login:
- username: root
- password: [none]
- Instructions concerning enabling SSH can be found here
OpenBSD
OpenBSD
- To learn more about OpenBSD, please visit OpenBSD main page
- ARM64 images, (including support for Pinebook Pro), can be found here OpenBSD arm64
Chromium OS Image Release
FydeOS
To learn more about FydeOS please visit [1]
- You can follow the ongoing discussion about FydeOS on the PINE64 forum (https://forum.pine64.org/showthread.php?tid=12201)
- DD image to microSD card or eMMC module. Highly recommend using Etcher
ChromiumOS Community Build Image by ayufan [microSD and eMMC Boot]
- DD image (for 8GB microSD card/16GB eMMC module and above)
- Direct download R77 build from ayufan's github
- MD5 (XZ file): 7B747B6D2B041C5C0C6434DDB524DB66
- size: 387MB
Android Image Releases
Android 7.1 microSD
Stock Android for DD method [micro SD Boot] [20190918]
- Production floor testing image
- Use 'dd' to write the image to the microSD card and boot. Using Etcher or another specialized SD writing tool is preferred.
- Please allow 3-5 minutes boot up time on first time for initialization
- DD image for 8GB microSD card
- Direct download from pine64.org
- MD5 (GZip file): 207BCBFFF59C1AB29F8ADC63D426EACB
- File Size: 562MB
- Direct download from pine64.org
- DD image for 16GB microSD card
- Direct download from pine64.org
- MD5 (GZip file): B1FC25A2F896F5C6B4B85EA6D1E75CDA
- File Size: 571MB
- Direct download from pine64.org
- DD image for 32GB microSD card
- Direct download from pine64.org
- MD5 (GZip file): A07E2C2A2798A77375268E423A30048A
- File Size: 589MB
- Direct download from pine64.org
- DD image for 64GB microSD card
- Direct download from pine64.org
- MD5 (GZip file): D7626BD50443A88AEB9254C88C575284
- File Size: 627MB
- Direct download from pine64.org
Stock for RK Flash tool [SD Boot] [20190427]
- Please unzip first and then using Rockchip SD Firmware Tool ver 1.57 to flash in, please remember to select "SD boot" option.
- Direct download from pine64.org
- MD5 (GZip file): DBA2109C393F514132EC8D5FB6E8EBE2
- File Size: 555MB
Android 7.1 eMMC
Stock Android for DD method [eMMC Boot] [20190807]
- Production floor testing image
- Please allows some time (around 5 minutes) for the initialization process on 1st boot
- DD image for 64GB eMMC Module
- Direct download from pine64.org
- MD5 (GZip file): 314583B550AFF0F424D9997D237D7046
- File Size: 634MB
- Direct download from pine64.org
- DD image for 128GB eMMC Module
- Direct download from pine64.org
- MD5 (GZip file): 16942B8F9EEE79B81FADDB09AF7E2E80
- File Size: 700MB
- Direct download from pine64.org
Stock for RK Flash tool [eMMC Boot] [20190807]
- Please unzip first and then using Rockchip Android tool ver 2.63 to flash in
- The OTG port located at USB type-C connector, needs USB type A to type C cable.
- Guide to flashing eMMC using Rockchip Tools
- Please allow 3-5 minutes boot up time on first time for initialization
- Direct download from pine64.org
- MD5 (GZip file): DC4C330787E57FC05F9D7D740F741620
- File Size: 555MB
Linux Installer Releases
Debian Installer
Daniel Thompson's Debian Installer for the Pinebook Pro
- This is an image creator and Debian installer that runs from an existing Linux OS and installs Debian Bullseye
- Installer can configure an encrypted rootfs and provides a choice of desktops, including the default Debian desktop based on Gnome 3
- Strict adoption of upstream Debian packages (with exception of kernel and bootloaders) in order to provide a clean upgrade path as Bullseye matures
- Download at: https://github.com/daniel-thompson/pinebook-pro-debian-installer/
- Pull requests welcome but for discussion and support please use the forum topic.
For more information, see the Pinebook_Pro_Debian_Installer wiki page
Official Debian Installer Images
- Uses only the upstream kernel and firmware without special patches
- No graphical display yet, works only through serial console
- Requires adding the non-free component to your /etc/apt/sources.list file and installing the "firmware-linux" package for Wi-Fi and Bluetooth support
- Installer is loaded into RAM, can install onto the same media from which it’s booted
- Supports automatic partitioning and full disk encryption through LVM
- Installer currently doesn't install the bootloader, leaving the installed system in an unbootable state until it's manually added
The relevant files are built daily here and may sometimes be unavailable if the build system is having issues. The "README.concatenateable_images" file provides instructions on how to combine the partition.img.gz file with the firmware.pinebook-pro.rk3399.img.gz file in order to create a DD-able image.
The official images are not recommended yet until the display begins working and the installer properly installs the bootloader. Most users will want to see Daniel Thompson's Debian Installer instead.
Gentoo Script
Gentoo Script for Pinebook Pro
- This is a script that prepares a Gentoo arm64 stage 3 tarball for the Pinebook Pro
- The script takes care of device specifics like an optimized make.conf, an overlay that provides kernel and firmware amongst others, and other miscellaneous fixes
- The usual tarball setup as per Gentoo Handbook is left to the user.
- Forum thread with instructions at https://forum.pine64.org/showthread.php?tid=8765
Kali Script
Kali Linux for Pinebook Pro
- This is a script to create official Kali Linux OS images for the Pinebook Pro
- The script carries out the build process in entirety and is Pinebook Pro specific
- Please pull the latest Kali Linux install script from the project's GitLab.
- For more information regarding building the OS image please read the README instruction at https://gitlab.com/kalilinux/build-scripts/kali-arm/blob/master/README.md
K1ss OS Script
K1ss Linux for Pinebook Pro
- This is a repository containing an unofficial port of KISS Linux to aarch64. The tarball is built for generic aarch64, currently being tested on the Pinebook Pro.
- Please pull the latest K1ss Linux install script from the project's GitHub.
- * You can follow the ongoing discussion about K1ss Linux on the PINE64 forum (https://forum.pine64.org/showthread.php?tid=9304)
NixOS Script
NixOS for Pinebook Pro
- This is instructions to install NixOS on the Pinebook: https://nixos.wiki/wiki/NixOS_on_ARM/PINE64_Pinebook
- Please pull the latest samueldr's repository from the project's GitHub.
- * You can follow the ongoing discussion about NixOS on the PINE64 forum (https://forum.pine64.org/showthread.php?tid=10524)
SkiffOS / Buildroot Script
SkiffOS for Pinebook Pro
- Instructions to build/install on the Pinebook Pro: https://github.com/skiffos/SkiffOS/tree/master/configs/pine64/book
- Please pull the latest version from the project's GitHub.