Difference between revisions of "PinePhone Hardware Accessory Compatibility"
Jump to navigation
Jump to search
(→Peripheral equipment: Add dell WD-15 test result (positive)) |
|||
| Line 17: | Line 17: | ||
|- | |- | ||
|Anker PowerExpand+ 7-in-1 USB-C PD Ethernet Hub || [https://www.anker.com/products/variant/powerexpand--7in1-usbc-pd-ethernet-hub/A83520A1 Anker] || USBC || -- || USB Ports and HDMI Port work, can charge while using this device (needs VCONN HW mod) || [https://wiki.mobian-project.org/doku.php?id=mods Mobian] || HDMI, USB3, Ethernet, PD-USBC, SD Card, Micro SD Card | |Anker PowerExpand+ 7-in-1 USB-C PD Ethernet Hub || [https://www.anker.com/products/variant/powerexpand--7in1-usbc-pd-ethernet-hub/A83520A1 Anker] || USBC || -- || USB Ports and HDMI Port work, can charge while using this device (needs VCONN HW mod) || [https://wiki.mobian-project.org/doku.php?id=mods Mobian] || HDMI, USB3, Ethernet, PD-USBC, SD Card, Micro SD Card | ||
|- | |||
|Dell WD-15 Docking station || [https://www.dell.com/support/article/en-us/sln296829/how-to-use-and-troubleshoot-dell-docking-station-wd15?lang=en Dell] || USB-C || 0424:2807 || USB Ports and charging works. Audio sinks and DP status changes are detected (needs VCONN HW mod and ANX firmware) || pmOS || HDMI, VGA and DP might work after a kernel update. ANX firmware is needed for charging after VCONN mod. | |||
|- | |- | ||
|} | |} | ||
Revision as of 14:39, 31 July 2020
List of devices that have been tried on the PinePhone, and the results.
Peripheral equipment
| Type | Make/Model | Connected via |
Hardware IDs | Result | Tested OS | Notes |
|---|---|---|---|---|---|---|
| 5-1 USB-C hub | from aliexpress | USBC | 05e3:0626 hub | PD not working, rest not working yet |
UBPorts/pmOS | HDMI, GBit eth, 2xUSB-3, USB-C PD image |
| Generic Bluetooth keyboard | generic | BT | -- | No pairing via ui, but functional via terminal | pmOS | Instructions |
| UMAX U-Connect Type-C Multiport H7 | ts-bohemia | USBC | - | USB-A ports, PD, HDMI works, SD card reader not enumerating on PP with removed VCONN switches (may need VCONN) | Arch Linux | HDMI, 3xUSB-3, USB-C PD, SD reader |
| Google Pixel USB-C to 3.5mm adapter | USBC | 18d1:5029 | Works, recognized as usb soundcard, but only if a cable is plugged in | pmOS | ||
| Anker PowerExpand+ 7-in-1 USB-C PD Ethernet Hub | Anker | USBC | -- | USB Ports and HDMI Port work, can charge while using this device (needs VCONN HW mod) | Mobian | HDMI, USB3, Ethernet, PD-USBC, SD Card, Micro SD Card |
| Dell WD-15 Docking station | Dell | USB-C | 0424:2807 | USB Ports and charging works. Audio sinks and DP status changes are detected (needs VCONN HW mod and ANX firmware) | pmOS | HDMI, VGA and DP might work after a kernel update. ANX firmware is needed for charging after VCONN mod. |
Protection
Screen protector
Official: PinePhone Tempered Glass Screen Protector
Most screen protectors for the iPhone 11 Pro Max and the iPhone XS Max fit the PinePhone (if the top notch is not obscured by a black foil or similar).
Case
The Pine store got official cases:
- PinePhone Hard Protective Case
- PinePhone Soft TPU Protective Case - "Reduce Digital Gap" Donation Program
Tight-fit cases of other phones can't be alienated for the PinePhone due as most times the proportions and/or camera notch won't fit. The phone can however also be used with "phone sleeves", such as those from fitBAG.