Difference between revisions of "PinePhone Software Releases"

Latest revision as of 14:11, 6 October 2024

This page contains a list of all available releases and tools for the PinePhone in alphabetical order.

Note: Some releases may not have a good setup for the backlight at low brightness. If configured too low, the backlight shuts down completely, but the screen is still displayed and usable in bright front-light.

See PinePhone Installation Instructions on how to install the operating systems. Please see PinePhone Updating Instructions for how to update the phone.

Software Releases

Arch Linux ARM

(Unofficial) Arch Linux ARM with choice of Phosh UI, Plasma Mobile, sxmo or barebones. It is maintained by the DanctNIX community (GitHub: danctnix, dreemurrs-embedded).

Download

Get both stable and test builds at GitHub releases.

Default credentials
Default user	`alarm/123456`
root (barebone only)	`root/root`

Notes

There are archmobile chat rooms on Matrix (#archmobile:kde.org) and Telegram (@archmobile).
Feel free to send us pull requests and reports issues on GitHub.

ExpidusOS

A fork of Void Linux with a custom fork of XFCE called Gensis as the default desktop environment, developed by Midstall Software.

Download

Check the download page for that latest version, or the image file list for all versions, look for the filename that starts with "pinephone".

Default credentials
Default user	`expidus/expidus`

Notes

What works, what does not work:

The ExpidusOS Wiki has a page detailing supported features.

How to contribute and report defects:

Join the Discord server or corresponding repo at GitHub (repo list).

Fedora

An (unofficial) vanilla Fedora rawhide build for aarch64 with megi's kernel and some additional packages to tie it all together. It aims to eventually be an upstream part of the Fedora project, rather than a phone-specific distribution.

Forum discussion: Fedora + Phosh for PinePhone
GitLab: [1]

Download

There is also an FTP server with images build every night @ ftp://pine.warpspeed.dk/nightly/pinephone/ (Mount this with something like Nautilus)

Default credentials
Nightly images (via FTP)	`pine/1111`

Notes

WiFi, Bluetooth, SMS, Data, Calls all work! There are still a few bugs though, and some features don't have driver support yet on any PinePhone distribution.

Please send your bug reports to the project's issue tracker. Be sure to include logs if applicable! Send us pull requests on [2].

Gentoo

There are unofficial Gentoo overlays with ebuilds for the PinePhone. There are no images - the image must be built manually, including picking the kernel, bootloader and the desired desktop environment. The ARM64 version of Gentoo has to be selected.

Download

Overlay locations:

https://git.gjdwebserver.nl/gjdwebserver/gjdwebserver-overlay

Notes

The documentation can be found here:

Note: Please consider cross-compiling the software on the computer. Long compilation times and heat production can lead to a reduced lifespan of the phone.

GloDroid

A fully open-source port of Android and LineageOS to the PinePhone.

GitHub: GloDroid

Download

Releases: GloDroid

Notes

Feature overview:

Works: WiFi, screen dimming, sound, touchscreen, charging and telephony(partially) works.
Doesn't work: Bluetooth and GPS
See more at project status page

Kali Linux

The official Kali Nethunter images for PinePhone and PinePhone Pro have been released now. For older/unofficial releases, you can still download from the GitHub releases page. Get Nethunter App for your PinePhone's Kali Linux. Packet Injection is working now, use iwconfig instead of airmon-ng.

Download

Warning: There are reports that the official Kali images fail to boot.

Default credentials
Default user for Unofficial Releases	`kali/8888`
Default user for Nethunter Releases	`kali/1234`

Notes

For the installation see the installation instructions under PinePhone Installation Instructions

LuneOS

LuneOS is one of the original multi-tasking OS-es that runs on Linux. Based on HP/Palm's webOS, merged with latest technology stack from LG called webOS OSE (a derivative of what LG uses on their Smart TV's), software such as Qt5 and makes use of the Yocto build system.

Download

LuneOS Preview images: Downloads

Default credentials
Default user	`root`

Notes

In order to connect to the device using SSH/SCP via WiFi: You can simply connect via SSH/SCP via WiFi using the PinePhone's IP address on port 22.

Maemo Leste

Maemo is a trimmed-down version of Debian for mobile devices, originally a collaboration between Nokia and many open source projects (the Maemo community) before Nokia abandoned it. The more well-known devices Maemo supports are the OpenMoko and N900. The community now takes full responsibility in developing fully open source Maemo for a variety of mobile devices. You may be interested to learn more about the features in their Maemo Leste FAQ.

Maemo 8 "Leste" is an ARM64 port of Devuan (Debian without systemd) and runs the mainline Linux kernel. The default user interface stack is Hildon, Xorg, Matchbox WM, and GTK.

Download

Maemo Leste test builds

There is also an image builder, see the wiki for instructions on how to build a custom image. For current status and instructions, please read their PinePhone wiki page.

Default credentials
root	`toor`
user	`12345 (lockscreen)`

Notes

Most discussion occurs at #maemo-leste on irc.libera.chat and this thread.

All other contact information is listed on the main page of the Maemo wiki.

Submit bug reports on github. To track known issues, you may use these search terms: pinephone, pine64.

Manjaro ARM

Manjaro is a user-friendly Linux distribution based on the independently developed Arch operating system with the Plasma Mobile and Phosh desktop environment.

Download

Phosh: Dev and Stable
Plasma Mobile: Dev and Stable
Lomiri: Dev (unmaintained)

Default credentials (Only Phosh)
Default user	`manjaro/123456`
root	`root/root`

Notes

The installation of the stable images is strongly suggested. The dev images might break frequently.

Mobian

An unofficial Debian build for ARM64 running with Phosh. The base Debian systems available are an old version of Debian stable (Bookworm 12.0 since June 2023), and Debian testing (Trixie since June 2023). The testing version has many more features and bug fixes than the stable version, but new bugs are more likely; the stable version should be upgraded to the most recent stable release after installing. See the installation instructions on the Debian wiki. If you have questions about Mobian, please ask them in the Mobian Matrix room.

Download

Images (top directory: Debian/stable; "weekly" directory: Debian/testing)

Note: Tow-Boot is required to be able to boot the images!

Default credentials
Default user	`mobian/1234`

Notes

Development is active. See the Mobian wiki.
In order to connect to the device using SSH/SCP via WiFi, you need to install SSH on the device. You can do this by executing the following in a shell: "sudo apt-get install ssh", afterwards you can connect via SSH/SCP via WiFi using the PinePhone's IP address on port 22.

Multi-distro demo image

Warning: This is a demo image for testing different operating systems before installing a regular image. Attempting to use this image productively is highly discouraged. The kernel is shared across the different operating systems and is not updated.

This image allow users to try many Linux distributions easily, without having to figure out how to flash them individually and juggle with many microSD cards. Also called megi's 15-in-1 multi boot image.

Main page: https://xnux.eu/p-boot-demo/
Git repo: https://megous.com/git/pinephone-multi-boot/
Forum discussion: 15-distro multi-boot image for Pinephone

Download

Update 2022-01-26, using megi's kernel 5.16.2

DD image to SD card and boot. This image is for 16GiB or larger SD cards, also works if flashed to eMMC.

This is also a good build for charging depleted battery. Just boot up this build with power supply connected, keep the PinePhone charging for 3 hours at power down stage.

For more info on this build, please visit its entry the "News" section of its web page.

Download torrent file from author's website
Download img.zst from author's website (speed limited to 512KiB/s)
Download torrent and img.zst from discord user uxes' mirror
- File name: multi.img.zst
- SHA-256: 39915b9d2aa2f33fd78552ac9a0e665c4aef97dd68a9f9a6c76f9fa2f0ac049e
- File Size: 6.9GiB

Due to its size, download though torrent is suggested by the author on its main page.

Default credentials
General	`1111`
sxmo	`user/1111`
Manjaro	seems to insist on `123456`

Notes

Note: Note about zstd) archive file (.zst):

On Linux, you may install or compile zstd, then write the image to SD card by piping zstdcat and dd. See the "Installation" section of its web page for command examples.

On Windows, instead of the offical zstd command line program, you may use 7-zip-zstd. Different installation method is provided in their README. Install 7-Zip-zstd / zstd, extract the disk image file (.img) from the zstd archive, and flash with tools like Win32 Disk Imager.

Also see PinePhone Installation Instructions.

Nemo Mobile

Nemo Mobile is the open source build of Sailfish OS with a open source UI called Glacier, based on Manjaro.

Download

Image

Default credentials
Default user	`manjaro/123456`
root	`root/root`

Notes

The website of the Nemo Mobile UX Team can be found here. Please report bugs regarding the Nemo Mobile UI as GitHub issue.

NixOS

NixOS is a Linux distribution built on top of the Nix package manager using declarative configuration to allow reliable system upgrades.

Download

There is a guided installer by the Mobile NixOS project available. An installer image that can be flashed to a sdcard can be downloaded from the Hydra build instance.

Users that want to build a local image, are expected to follow the instructions in the Getting Started page, and Project's device page.

Notes

Project home page: Mobile NixOS

OpenMandriva Lx

OpenMandriva Lx with Plasma Mobile as UI.

Download

The official image can be found at sourceforge.net. See here for the offical announcement.

Notes

Note: This image is solely for testing purposes.

openSUSE

Our images use the same openSUSE Tumbleweed base as our desktop images, except what needs to be changed for the PinePhone. The images include zypper (RPM) as the default package manager, and have access to virtually the same (open source) software as our desktop repositories, thanks to the Factory ports. Using dnf is possible, if preferred.

Download

Phosh / SHA-256 / SHA-256 Signature
Plasma Mobile / SHA-256 / SHA-256 Signature

To verify the images you need to import our GPG key. Keep on mind that the first boot may stay on black screen for about a minute - consequent boots should be faster.

You can find install instructions at this section in the openSUSE Wiki.

Default credentials
Default user	`pine/1234`
root	`root/linux`

Notes

You can find all information about the releases of the project here. Detailed information, tips and troubleshooting suggestions are also provided at the openSUSE Wiki. You will also find information in our wiki on how to report issues (Contributing section).

postmarketOS

postmarketOS extends Alpine Linux to run on smartphones and other mobile devices. It offers various user interfaces (Phosh, Plasma Mobile, Sxmo, Plasma Desktop, Gnome 3, Kodi, XFCE4, ...).

Download

Download page

Default credentials
Test images user	`user/147147`

Notes

As of writing, official images are provided with Phosh, Plasma Mobile and Sxmo. The official images come in two flavors, either as a test image to try out postmarketOS, or with the installer.

When using the installer images (recommended), it is possible to:

encrypt the installation
install from the SD card to eMMC

Power users may also create their own image with the distribution's install and development tool pmbootstrap.

See the pine64-pinephone page of the postmarketOS wiki for details.

Rhino Linux

Rhino Linux is an Ubuntu-based distribution that uses the rolling-release model by tracking the devel branch of repositories. The port is currently maintained by Oren Klopfer (oklopfer).

Tow-Boot is required for installing Rhino Linux. Instructions for installing Tow-Boot to the PinePhone can be found here. After Tow-Boot has been installed to your device, Rhino Linux installation just requires flashing the .img.xz to an SD or the eMMC.

Download

Rhino Linux Downloads (select Pine64 on the dropdown)

Default credentials
Default user	`rhino/1234`

Notes

Foundational to the distribution is Pacstall, a Debian-based user repository inspired by the AUR. Additionally, RL comes with Unicorn, a custom modified version of XFCE with various modernizations and improvements, including auto-rotation for mobile devices.

Discord - Matrix - GitHub - Wiki

Sailfish OS

Sailfish OS is a Linux-based operating system based on open source projects such as Mer, and a closed source UI based on Lipstick.

PinePhone Wiki Page on Mer Wiki, for both Nemo Mobile and Sailfish OS.
Linux kernel config repo
Sailfish OS repo

Download

Flashing script

The Sailfish OS image is built on Gitlab CI. The latest image can be installed using the flashing script.

The script downloads the image and bootloader from the CI, extracts everything and burns it onto the SD card. Note: The script will format and erase the SD card!

Instructions:

Download the flashing script
Insert a microSD card in your device
Make the script executable: chmod +x flash-it.sh
Verify that you have the bsdtar package installed
Execute it: ./flash-it.sh
Follow the instructions. Some commands in the script require root permissions (for example: mounting and flashing the SD card).

When asked where to flash, type 'raw' and it will build the image on your computer. Otherwise define the path /dev/.... to flash to card or internal emmc.

username/password

Set PIN on initialization.

Notes

Sometimes the first run stalls before the tutorial. Reboot and it will start from setting the security pin.
The homescreen may be locked unless you boot with a sim card inserted. An old expired sim will do. If you do not have a SIM card on hands, do NOT set a security code on first boot.
When a screen with a loading circle is displayed, just left/right swipe it away.
If you're not familiar with Sailfish OS, pay attention to the tutorial - the interface works great, but is not immediately obvious. If you are familiar with it, you can skip the tutorial by touching all 4 corners starting top left.

What works, what does not work

See the Hardware Support section on the Mer Wiki's PinePhone Page.

There is a limited selection of apps available from the Jolla store, the vast majority are hosted on openrepos.net. If the Storeman app for openrepos is not preinstalled, download the RPM and click to install.

How to contribute and report defects

See the documentation wiki at the github project for help and links.

See the Installation section on the Mer Wiki's PinePhone Page for compile, build and development.

Git repo links are at the top of this OS section. other repos that may be helpful:

GitHub project page
the repo of the flash-it.sh flashing script
Mer Open Build Service page (Mer is being assimilated into Sailfish OS and OBS is shutting down, also see OpenStack is replacing OBS with another build system based on Jenkins, if it's related, even OBS come back under Sailfish OS, it will be different.)

See the Sailfish OS wiki for links to their forum, as well as info required when reporting an issue. See the Sailfish OS wiki main page for options to contribute to Sailfish OS.

Notes

OTA is supported: zypper refresh && zypper update as root (devel-su to get root access). Things that need reflash are bootloader specific at the moment. If improvements like Crust or changes of partition layout are added, then you need to reflash.

SkiffOS

Minimal in-memory cross-compiled OS optimized for hosting multiple in parallel Docker containers. Provides the reliability of firmware with the ease-of-use of package managers.

Download

The repository and instructions can be found here.

Notes

Upgrade over-the-air via a simple rsync script, or copying 3 files.

Uses the Buildroot cross-compilation tool for support for all Pine64 boards.

Use configuration packages to configure distro:

Package	Distro
core/pinephone_neon	KDE Neon via Ubuntu repositories
core/pinephone_nixos	Nixos Mobile
core/pinephone_gentoo	Gentoo with Link-time Optimization & KDE Mobile or Phosh
core/pinephone_ubports	Ubuntu Ports for PinePhone
core/pinephone_manjaro_kde	Manjaro for PinePhone: KDE variant
core/pinephone_manjaro_phosh	Manjaro for PinePhone: Phosh variant
core/pinephone_manjaro_lomiri	Manjaro for PinePhone: Lomiri variant

The boot-up OS is upgraded independently from the containers.

Slackware

Slackware is the world's oldest actively developed Linux distribution, providing a modern user land (applications) and Linux Kernel, within a more classic Unix Operating System environment.

Download

http://dl.fail.pp.ua/slackware/images/pinephone/

Notes

Discussion: Thread

Ubuntu Touch

A Mobile Version of the Ubuntu Operating System made and maintained by the UBports Community. The port is currently maintained by Oren Klopfer (oklopfer).

Tow-Boot is required for installing the latest version of Ubuntu Touch (20.04) on the PinePhone. Instructions for installing Tow-Boot to the PinePhone can be found here.

Installation instructions can be found at this UBports post. After Tow-Boot has been installed to your device, Ubuntu Touch installation just requires flashing the .img.xz to an SD or the eMMC.

Download

UBports 20.04 PinePhone Latest Releases

UBports PinePhone Device Info

Default credentials
Default user	Set during boot
root	`phablet/1234`

Notes

Scroll down to the middle of the GitLab project page, or directly here at the UBports website to see which features work.

Contributions and bug reports can be made at the UBports PinePhone GitLab page. See UBports website for how to donate.

Further Releases

Apache NuttX RTOS

Apache NuttX RTOS is a Real-Time Operating System that supports PinePhone

Apache NuttX RTOS on PINE64 PinePhone

Sculpt Operating System (Genode OS Framework)

Sculpt OS since version 23.04 supports PinePhone. Ready-to-use system image available on the download page.

Tools

There are software tools, that can be booted on the PinePhone.

JumpDrive

JumpDrive can be used to flash the eMMC (and the microSD card), see PinePhone Installation Instructions#Using JumpDrive.

See https://github.com/dreemurrs-embedded/Jumpdrive/releases for the latest image. Make sure to download the "PinePhone" image and to unpack the archive before flashing.

Tow-Boot

Tow-Boot is a more user-friendly distribution of U-Boot. Can also mount internal storage as USB Mass Storage by holding the volume up button at startup before and during the second vibration and the LED will turn blue if done successfully.

See https://github.com/Tow-Boot/Tow-Boot/releases for the latest image. Make sure to download the image with pinephoneA64 in the name.

Hardware test build

Warning: The factorytest image for hardware testing appears to be no longer maintained.

On the Braveheart model, there was a postmarketOS based basic Factory Test OS pre-installed on the eMMC. The developer Martijn Braam from postmarketOS has improved the functionality of the image considerably later. Since the 20200501 version, it is able to test all the hardware. It also includes functionality to install a new OS to the eMMC when using with an test image that includes that OS image. The downloadable image just does the hardware tests. Do not flash eMMC to test your device, just flash it to microSD and test from there. New versions are distributed as part of the postmarketOS distribution.

Note: The magnetometer test will fail on the new Beta Edition, as the factory image wasn't updated for it yet.

Links:

Software Images (NOTE: Link is is broken) (download the latest one named like pine-pinephone-yyyyMMdd-factorytestX.img.xz)
Git repo
Documentation

Historic factory builds

These are different operating system builds that was preloaded in the factory with testing utility.

Download the build, extract the image and dd it to a 8 GB or larger microSD card, then insert it into the PinePhone. After power up or reboot, you may perform and complete the test routine, or apply the build from microSD card to eMMC.

All the download links below are direct download from pine64.org.

Warning: These images are for testing purposes only. If you are looking for an up-to-date image please select one from the software releases section instead.

Distribution	Download Link	File Size	MD5
Beta Edition	pine64-pinephone-plamo-beta-factorytest.img.xz	1.78GB	`f16bce93504a52217540ac886863a418`
Mobian	pine64-pinephone-20201207-factorytest-mobian.img.xz	1.41GB	`015be381ff4e650a7fca6d4eaa90d63d`
KDE	pine64-pinephone-20201208-factorytest-kde.img.xz	2.28GB	`32979ff17b5ec4d358ce99f1aff0c77c`
Manjaro	pine64-pinephone-20201013-manjaro-stable-20201018-factory56.img.xz	1.04GB	`4edfd4dceaefdd32a3417c1727161c29`
postmarketOS	pine64-pinephone-20200726-phosh-v20.05-factory.img.xz	517MB	`244093be2f6d728fcbd1d29114607727`
Ubuntu Touch	PinePhone-flasher-ubuntu-7b.img.gz	1.05GB	`2d7f5271e7a281db8f1b1219bedbe131`

Installing other ARM64 distributions

Other ARM64 distributions might be installed as well, however this requires some tinkering and may not work well.

Note: Distributions not on this page may not even boot after you follow this section. In the best case, they will be barely usable. This is more for fun, or if you would like to port a new distribution to the PinePhone.

General steps:

Create a boot partition (from 4 MB to about 252 MB) and a root partition (from the end of boot to the end of the card) filesystem on the SD card.
Format the boot partition with vfat, and the root partition with a supported filesystem like ext4 or f2fs.
Extract the root filesystem from your distribution's ARM image into the root filesystem on the SD card. Do not copy the partition, copy the files instead (in archive mode, like rsync -ar).
Edit /etc/fstab to match your partitions.
Grab megi's kernel from https://xff.cz/kernels/, Follow the instructions in the README, which involves copying the kernel modules into the SD card rootfs, and writing u-boot and the bootloader.

If you would like to see examples or specific commands for how to complete these steps, see:

an example for Fedora, current unofficial [#Fedora] release
an example for Arch Linux by megi

Other Resources

Community

Links to the community services

Hardware information

General PinePhone hardware info in this Pine64 wiki
Details specific to the Braveheart Edition: PinePhone 1.1 Braveheart hardware details
Details specific to the Community Edition: PinePhone 1.2 hardware details
The postmarketOS wiki has a detailed page on the PinePhone hardware here and the preceding devkit here

Other software information

sunxi community wiki
megi's feature/driver support matrix
megi bootUI notes (for dualbooting/multibooting) see demonstration on YouTube
ayufan boot tools

Other

@@ Line 1: / Line 1: @@
-This page contains a list of all available OS releases for the [[PinePhone]], as well as links to other resources.
+This page contains a list of all available releases and tools for the [[PinePhone]] in alphabetical order.
-See [[PinePhone Installation Instructions]] on how to install the operating systems.<br>
+{{Info|Some releases may not have a good setup for the backlight at low brightness. If configured too low, the backlight shuts down completely, but the screen is still displayed and usable in bright front-light.}}
-However, if your phone came preloaded with software, Please see [[PinePhone Updating Instructions]].
-{{Hint| '''Note:''' Some releases may not have a good setup for the backlight at low brightness.
+See [[PinePhone Installation Instructions]] on how to install the operating systems. Please see [[PinePhone Updating Instructions]] for how to update the phone.
-If configured too low, the backlight shuts down completely, but the screen is still displayed and usable in bright front-light.}}
-= Software Releases =
+== Software Releases ==
-This is a list of OSes that specifically support the PinePhone.
+=== Arch Linux ARM ===
-Since PinePhone support is included in Mainline Linux, in principle, any ARM Linux OS can be used if possible required patches are included.
-== Arch Linux ARM ==
 [[File:Archlinux-logo.png|right|100px]]
-(Unofficial) Arch Linux ARM with choice of Phosh UI, Plasma Mobile, or barebones.
+(Unofficial) Arch Linux ARM with choice of Phosh UI, Plasma Mobile, sxmo or barebones. It is maintained by the [https://danctnix.org/ DanctNIX] community (GitHub: [https://github.com/DanctNIX/danctnix danctnix], [https://github.com/dreemurrs-embedded dreemurrs-embedded]).
-Currently being maintained by the [https://danctnix.org/ DanctNIX] community (GitHub: [https://github.com/DanctNIX/danctnix danctnix], [https://github.com/dreemurrs-embedded dreemurrs-embedded]).
-* GitHub: [https://github.com/dreemurrs-embedded/Pine64-Arch dreemurrs-embedded/Pine64-Arch]
-'''Download location'''
-Get the latest image here: https://github.com/dreemurrs-embedded/Pine64-Arch/releases
+==== Download ====
-'''username/password'''
+Get both stable and test builds at [https://github.com/dreemurrs-embedded/Pine64-Arch/releases GitHub releases].
 {| class="wikitable"
-! Default user || <code>alarm/123456</code>
+!colspan="2" style="background: #a7d7f9;"| Default credentials
-! root         || <code>root/root</code>
+|-
+! Default user
+| <code>alarm/123456</code>
+|-
+! root (barebone only)
+| <code>root/root</code>
 |}
-'''What works, what does not work'''
+==== Notes ====
-Most of the things now works, there are some minor issues with [[Crust]].
+* There are ''archmobile'' chat rooms on Matrix ([https://matrix.to/#/#archmobile:kde.org #archmobile:kde.org]) and Telegram ([https://t.me/archmobile @archmobile]).
+* Feel free to send us [https://github.com/dreemurrs-embedded/Pine64-Arch/pulls pull requests] and reports [https://github.com/dreemurrs-embedded/Pine64-Arch/issues issues] on [https://github.com/dreemurrs-embedded/Pine64-Arch GitHub].
+----
-'''How to contribute and report defects'''
+=== ExpidusOS ===
-You may find the Discord, Matrix and Telegram of DanctNIX community at [https://github.com/DanctNIX/danctnix/blob/master/README.md#channel-list the Channel list section of DanctNIX/README.md].
-Feel free to send us [https://github.com/dreemurrs-embedded/Pine64-Arch/pulls pull requests] and report [https://github.com/dreemurrs-embedded/Pine64-Arch/issues issues] on [https://github.com/dreemurrs-embedded/Pine64-Arch GitHub].
-== ExpidusOS ==
 A fork of [https://voidlinux.org Void Linux] with a custom fork of XFCE called [https://github.com/ExpidusOS/genesis Gensis] as the default desktop environment, developed by [https://midstall.com/ Midstall Software].
@@ Line 50: / Line 41: @@
 * GitHub: [https://github.com/ExpidusOS ExpidusOS]
-'''Download location'''
+==== Download ====
-Check the [https://expidusos.com/download download page] for that latest version, or the [https://build.expidusos.com/ image file list] for all versions, look for the file name that starts with "pinephone".
+Check the [https://expidusos.com/download download page] for that latest version, or the [https://build.expidusos.com/ image file list] for all versions, look for the filename that starts with "pinephone".
-'''username/password'''
+{| class="wikitable"
+!colspan="2" style="background: #a7d7f9;"| Default credentials
+|-
+! Default user
+| <code>expidus/expidus</code>
+|}
+==== Notes ====
-expidus/expidus
+What works, what does not work:
-'''What works, what does not work'''
+* The ExpidusOS Wiki has a page detailing [https://wiki.expidusos.com/index.php/Device:PinePhone supported features].
-The ExpidusOS Wiki has a page detailing [https://wiki.expidusos.com/index.php/Device:PinePhone supported features].
+How to contribute and report defects:
-'''How to contribute and report defects'''
+* Join the [https://discord.gg/GVfBF2w Discord server] or corresponding repo at GitHub ([https://github.com/orgs/ExpidusOS/repositories repo list]).
-Join the [https://discord.gg/GVfBF2w Discord server] or corresponding repo at GitHub ([https://github.com/orgs/ExpidusOS/repositories repo list]).
+----
-== Fedora ==
+=== Fedora ===
-[[File:Fedora-logo.png|right|100px]]
+[[File:Fedora1.png|right|100px]]
 An (unofficial) vanilla Fedora rawhide build for aarch64 with megi's kernel and [https://copr.fedorainfracloud.org/coprs/njha/mobile/packages/ some additional packages] to tie it all together.
@@ Line 73: / Line 71: @@
 * Forum discussion: [https://forum.pine64.org/showthread.php?tid=9347 Fedora + Phosh for PinePhone]
-* GitHub: [https://github.com/nikhiljha/pp-fedora-sdsetup nikhiljha/pp-fedora-sdsetup]
+* GitLab: [https://gitlab.com/fedora/sigs/mobility]
-'''Download location'''
+==== Download ====
-* [https://github.com/nikhiljha/pp-fedora-sdsetup/releases Flashable images]
 * [https://github.com/nikhiljha/pp-fedora-sdsetup          Build scripts]
 * [https://copr.fedorainfracloud.org/coprs/njha/mobile/    Packages (Fedora COPR)]
-There is also an FTP server with a full Fedora 34 workstation build with phosh: ftp://pine.warpspeed.dk/nightly/pinephone/ (Mount this with something like Nautilus)
+There is also an FTP server with images build every night @ ftp://pine.warpspeed.dk/nightly/pinephone/ (Mount this with something like Nautilus)
-'''username/password'''
+{| class="wikitable"
+!colspan="2" style="background: #a7d7f9;"| Default credentials
+|-
+! Nightly images (via FTP)
+| <code>pine/1111</code>
+|}
+==== Notes ====
-pine/123456
+WiFi, Bluetooth, SMS, Data, Calls all work! There are still a few bugs though, and [https://xnux.eu/devices/pine64-pinephone.html#toc-feature-driver-support-matrix some features don't have driver support yet] on any PinePhone distribution.
-'''What works, what does not work'''
+Please send your bug reports to [https://github.com/nikhiljha/pp-fedora-sdsetup/issues the project's issue tracker]. Be sure to include logs if applicable! Send us pull requests on [https://gitlab.com/groups/fedora/sigs/mobility/-/issues].
-WiFi, Bluetooth, SMS, Data, Calls all work!
+----
-There are still a few bugs though, and [https://xnux.eu/devices/pine64-pinephone.html#toc-feature-driver-support-matrix some features don't have driver support yet] on any PinePhone distribution.
+=== Gentoo ===
+[[File:GentooLogo.png|right|100px]]
-'''How to contribute and report defects'''
+There are unofficial Gentoo overlays with ebuilds for the PinePhone. There are no images - the image must be built manually, including picking the kernel, bootloader and the desired desktop environment. The ARM64 version of Gentoo has to be selected.
-Please send your bug reports to [https://github.com/nikhiljha/pp-fedora-sdsetup/issues the project's issue tracker].
+==== Download ====
-Be sure to include logs if applicable!
-Send us pull requests on [https://github.com/nikhiljha/pp-fedora-sdsetup/pulls Github].
-== Gentoo ==
+Overlay locations:
-[[File:GentooLogo.png|right|100px]]<!--
--->{{hint|Please consider cross-compiling the software on the computer.
+* https://git.gjdwebserver.nl/gjdwebserver/gjdwebserver-overlay
-Long compilation times and heat production can lead to a reduced lifespan of the phone.}}<!--
--->There are unofficial Gentoo overlays with ebuilds for the PinePhone.
+==== Notes ====
-There are no images - you'll be building it yourself, picking which kernel, bootloader and desktop environment you want to use.
-You will be using the arm64 version of Gentoo.
-'''Documentation'''
+The documentation can be found here:
-* https://stealthgun.tweakblogs.net/blog/19336/gentoo-on-a-pinephone
+* https://blog.gjdwebserver.nl/ords/f?p=107:HOME:::::ARTICLE:gentoo-on-a-pinephone
+* https://blog.gjdwebserver.nl/ords/f?p=107:HOME:::::ARTICLE:gentoo-on-a-pinephone-making-it-a-usable-phone
+* https://blog.gjdwebserver.nl/ords/f?p=107:HOME:::::ARTICLE:gentoo-on-a-pinephone-pro
 * https://wiki.gentoo.org/wiki/User:Dr41nU/PinePhone
 * https://wiki.gentoo.org/wiki/PinePhone (incomplete)
-'''Overlay locations'''
+{{Info|Please consider cross-compiling the software on the computer. Long compilation times and heat production can lead to a reduced lifespan of the phone.}}
+----
+=== GloDroid ===
-* https://gitlab.com/bingch/gentoo-overlay
+A fully open-source port of Android and LineageOS to the PinePhone.
-* https://github.com/stealthgun/gjdwebserver-overlay
-== GloDroid ==
+GitHub: [https://github.com/GloDroidCommunity/pine64-pinephone GloDroid]
-{{Hint|There can be large intervals between release update, so available images may be outdated and do not reflect the state of the current developments.}}<!--
+==== Download ====
--->A fully open source port of Android to the PinePhone.
+* Releases: [https://github.com/GloDroidCommunity/pine64-pinephone/releases GloDroid]
-* GitHub: [https://github.com/GloDroid GloDroid]
+==== Notes ====
-'''Download location'''
+Feature overview:
-https://github.com/GloDroid/glodroid_manifest/releases (last release at 2021-05-20)
+* Works: WiFi, screen dimming, sound, touchscreen, charging and telephony(partially) works.
+* Doesn't work: Bluetooth and GPS
+* See more at [https://github.com/GloDroidCommunity/pine64-pinephone/issues/2 project status page]
-'''What works, what does not work'''
+----
-Works: WiFi, screen dimming, touchscreen and charging work.
+=== Kali Linux ===
-Don't work: Bluetooth, Telephony, GPS, Sound
+[[File:Kali-logo.png|right|200px]]
-== LuneOS ==
+The official Kali Nethunter images for PinePhone and PinePhone Pro have been released now. For older/unofficial releases, you can still download from the GitHub releases page. Get [https://github.com/Shubhamvis98/nethunter-pinephone Nethunter App] for your PinePhone's Kali Linux. Packet Injection is working now, use iwconfig instead of airmon-ng.
-[[File:WebOS-Ports-logo.png|right|100px]]
-LuneOS is a open source mobile operating system based on [https://www.webosose.org/ webOS Open Source Edition]([https://github.com/webosose GitHub], previously known as [https://github.com/openwebos Open webOS]) by LG, comes with [https://webos-ports.org/wiki/Luna_Next Luna Next] UI, currently developed by the WebOS Ports community.
+==== Download ====
-* [https://www.webos-ports.org/wiki/Main_Page WebOS Ports Wiki]
+* [https://github.com/Shubhamvis98/kali-pinephone/releases Kali Phosh Unofficial]
-* [https://webos-ports.org/wiki/Pinephone_Info WebOS-Ports Wiki's Pinephone page]
+* [https://www.kali.org/get-kali/#kali-mobile Kali Nethunter Pro Official]
-* GitHub: [https://github.com/webOS-ports WebOS Ports]
-'''Download location'''
+{{Warning|There are reports that the official Kali images fail to boot.}}
-* [http://build.webos-ports.org/luneos-testing/images/pinephone/ LuneOS test image for PinePhone]
+{| class="wikitable"
+!colspan="2" style="background: #a7d7f9;"| Default credentials
+|-
+! Default user for Unofficial Releases
+| <code>kali/8888</code>
+|-
+! Default user for Nethunter Releases
+| <code>kali/1234</code>
+|}
-It is recommended to use ''bmaptool'', which is faster than dd, and can decompress archived image files on-the-fly.
+==== Notes ====
-Syntax is:
+For the installation see the installation instructions under [[PinePhone Installation Instructions]]
- bmaptool copy [from] [to]
+----
-For example:
+=== LuneOS ===
+[[File:Luneos-logo-256.png|right|100px]]
- bmaptool copy http://build.webos-ports.org/luneos-testing/images/pinephone/luneos-dev-image-pinephone-testing-0-140.rootfs.wic.gz /dev/mmcblk0
+LuneOS is one of the original multi-tasking OS-es that runs on Linux. Based on HP/Palm's webOS, merged with latest technology stack from LG called webOS OSE (a derivative of what LG uses on their Smart TV's), software such as Qt5 and makes use of the Yocto build system.
-.wic file can be treated as .img file when flashing. You may rename .wic file to .img when using GUI tools that require file extension to be .img.
+* [https://www.webos-ports.org/wiki/Main_Page WebOS Ports Wiki]
+* [https://webos-ports.org/wiki/Pinephone_Info WebOS-Ports Wiki's Pinephone page]
+* GitHub: [https://github.com/webOS-ports WebOS Ports]
-== Maemo Leste ==
+==== Download ====
-[[File:Maemoleste-logo.png|right|100px]]
-[https://en.wikipedia.org/wiki/Maemo Maemo] is a trimmed-down version of Debian for mobile devices,
+* LuneOS Preview images: [https://github.com/webOS-ports/meta-pine64-luneos/releases Downloads]
-originally a collaboration between Nokia and many open source projects (the [http://maemo.org/intro/ Maemo community]) before Nokia abandoned it.
-The community now takes full responsibility in developing fully open source Maemo for a variety of mobile devices.
-The new version Maemo 8 "Leste" is an ARM64 port of [https://devuan.org/ Devuan] (Debian without systemd) and runs the mainline Linux kernel.
+{| class="wikitable"
-The default user interface stack is [https://en.wikipedia.org/wiki/Hildon Hildon], [https://en.wikipedia.org/wiki/X.Org_Server Xorg], [https://en.wikipedia.org/wiki/Matchbox_(window_manager) Matchbox WM], and [https://en.wikipedia.org/wiki/GTK GTK].
+!colspan="2" style="background: #a7d7f9;"| Default credentials
-The current version is Devuan Beowulf (Debian Buster) and has simultaneous support for both Devuan and Debian.
+|-
+! Default user
+| <code>root</code>
+|}
-In addition to the main repository, they [https://maemo-leste.github.io/maemo-leste-repositories-and-community-packages.html announced] a [https://github.com/maemo-leste-extras/bugtracker community repository].
+==== Notes ====
-To keep updated they use automation in their package maintenance with [https://github.com/maemo-leste/jenkins-integration jenkins] (similar to [https://www.debian.org/devel/buildd/ debian's build]).
-Porting packages to Maemo Leste is basically a simple matter of porting to arm64 version of Debian/Devuan, which benefits both projects.
-* [https://maemo-leste.github.io/ Maemo Leste website]
+In order to connect to the device using SSH/SCP via WiFi: You can simply connect via SSH/SCP via WiFi using the PinePhone's IP address on port 22.
-* [https://leste.maemo.org/Main_Page Maemo Leste Wiki]
+----
-** [https://leste.maemo.org/PinePhone PinePhone wiki page]
-** [https://leste.maemo.org/Leste_FAQ Maemo Leste FAQ]
-* GitHub: [https://github.com/maemo-leste maemo-leste]
-* Twitter: [https://twitter.com/maemoleste @maemoleste]
-'''Download location'''
+=== Maemo Leste ===
+[[File:Maemoleste-logo.png|right|100px]]
-[http://maedevu.maemo.org/images/pinephone/ Maemo Leste test builds]. There is also an [https://github.com/maemo-leste/image-builder image builder], see their wiki for instructions on how to [https://leste.maemo.org/Image_Builder build a custom image].
+[https://en.wikipedia.org/wiki/Maemo Maemo] is a trimmed-down version of Debian for mobile devices,
+originally a collaboration between Nokia and many open source projects (the [http://maemo.org/intro/ Maemo community]) before Nokia abandoned it. The more well-known devices Maemo supports are the OpenMoko and N900. The community now takes full responsibility in developing fully open source Maemo for a variety of mobile devices. You may be interested to learn more about the features in their [https://leste.maemo.org/Leste_FAQ Maemo Leste FAQ].
-'''username/password'''
+Maemo 8 "Leste" is an ARM64 port of [https://devuan.org/ Devuan] (Debian without systemd) and runs the mainline Linux kernel.
+The default user interface stack is [https://en.wikipedia.org/wiki/Hildon Hildon], [https://en.wikipedia.org/wiki/X.Org_Server Xorg], [https://en.wikipedia.org/wiki/Matchbox_(window_manager) Matchbox WM], and [https://en.wikipedia.org/wiki/GTK GTK].
-root/toor
+==== Download ====
-You may use <code>sudo</code> directly.
+* [http://maedevu.maemo.org/images/pinephone/ Maemo Leste test builds]
-'''What works, what does not work'''
+There is also an [https://github.com/maemo-leste/image-builder image builder], see the wiki for instructions on how to [https://leste.maemo.org/Image_Builder build a custom image]. For current status and instructions, please read their [https://leste.maemo.org/PinePhone PinePhone wiki page].
-For current status and workarounds, please read their [https://leste.maemo.org/PinePhone PinePhone wiki page].
+{| class="wikitable"
+!colspan="2" style="background: #a7d7f9;"| Default credentials
+|-
+! root
+| <code>toor</code>
+|-
+! user
+| <code>12345 (lockscreen)</code>
+|}
-'''How to contribute and report defects'''
+==== Notes ====
-Most discussion occurs at  [ircs://irc.libera.chat:6697/#maemo-leste <code>#maemo-leste</code> on <code>irc.libera.chat</code>].
+Most discussion occurs at  [ircs://irc.libera.chat:6697/#maemo-leste <code>#maemo-leste</code> on <code>irc.libera.chat</code>] and [https://talk.maemo.org/showthread.php?t=100192&page=60 this thread].
-The Maemo website also has an [https://talk.maemo.org/showthread.php?p=1565822 ongoing forum thread] for feedback.
 All other contact information is listed on the [https://leste.maemo.org/Main_Page main page] of the Maemo wiki.
@@ Line 210: / Line 229: @@
 [https://github.com/maemo-leste/bugtracker/issues?utf8=%E2%9C%93&q=is%3Aissue+is%3Aopen+pine64 pine64].
-Learn about
+----
-[https://leste.maemo.org/Development development],
-[https://leste.maemo.org/Development/Porting_Packages porting packages],
-[https://leste.maemo.org/Development/Building_Packages building packages],
-[https://leste.maemo.org/Development/Tasks todo list],
-and general info on [https://wiki.debian.org/HowToPackageForDebian how to package for Debian].
-Some tasks have funding available.
-== Manjaro ARM ==
+=== Manjaro ARM ===
 [[File:Manjaro-logo.svg|right|100px]]
-Manjaro is a user-friendly Linux distribution based on the independently developed Arch operating system with the Plasma Mobile desktop environment.
+Manjaro is a user-friendly Linux distribution based on the independently developed Arch operating system with the Plasma Mobile and Phosh desktop environment.
-'''Download location'''
+==== Download ====
-* Phosh: [https://github.com/manjaro-pinephone/phosh Stable] / [https://github.com/manjaro-pinephone/phosh-dev Dev]
+* Phosh: [https://github.com/manjaro-pinephone/phosh-dev/releases Dev] and [https://github.com/manjaro-pinephone/phosh/releases Stable]
-* Plasma Mobile: [https://github.com/manjaro-pinephone/plasma-mobile Stable] / [https://github.com/manjaro-pinephone/plasma-mobile-dev Dev]
+* Plasma Mobile: [https://github.com/manjaro-pinephone/plasma-mobile-dev/releases Dev] and [https://github.com/manjaro-pinephone/plasma-mobile/releases Stable]
-* Lomiri: [https://github.com/manjaro-pinephone/lomiri-dev Dev] (No longer maintained)
+* Lomiri: [https://github.com/manjaro-pinephone/lomiri-dev Dev] (unmaintained)
-'''username/password'''
 {| class="wikitable"
-! Default user || <code>manjaro/123456</code>
+!colspan="2" style="background: #a7d7f9;"| Default credentials (Only Phosh)
-! root         || <code>root/root</code>
+|-
+! Default user
+| <code>manjaro/123456</code>
+|-
+! root
+| <code>root/root</code>
 |}
-'''What works, what does not work'''<!--
+==== Notes ====
--->{{Hint| '''Note:''' At the first boot, the Phosh image will be loaded at a TTY login prompt for multiple minutes.}}<!--
+The installation of the stable images is strongly suggested. The dev images might break frequently.
--->See Manjaro's release announcements on their forum.
+----
-Recent ones:
-[https://forum.manjaro.org/t/manjaro-arm-beta12-with-phosh-pinephone/73099 Phosh],
-[https://forum.manjaro.org/t/manjaro-arm-beta5-with-plasma-mobile-pinephone/69318 Plasma] and
-[https://forum.manjaro.org/t/manjaro-arm-alpha3-with-lomiri-pinephone/49923 Lomiri].
-'''How to contribute and report defects'''
+=== Mobian ===
-See the end of the [https://forum.manjaro.org/t/manjaro-arm-beta7-with-phosh-pinephone/58901 announcement].
-== Mobian ==
 [[File:Debian-logo.png|right|100px]]
-An unofficial [https://www.debian.org Debian] build for ARM64 running with Phosh (developed by Purism, uses Wayland instead of Xorg).
+An unofficial [https://www.debian.org Debian] build for ARM64 running with Phosh. The base Debian systems available are an old version of [https://www.debian.org/releases/stable Debian stable] (Bookworm 12.0 since June 2023), and [https://www.debian.org/releases/testing Debian testing] (Trixie since June 2023). The ''testing'' version has many more features and bug fixes than the ''stable'' version, but new bugs are more likely; the ''stable'' version should be upgraded to the most recent stable release after installing. See the installation instructions [https://wiki.debian.org/InstallingDebianOn/PINE64/PinePhone on the Debian wiki]. If you have questions about Mobian, please ask them in the [https://matrix.to/#/#mobian:matrix.org Mobian Matrix room].
-The base system is pure Debian, with only the GUI applications and a few others (ModemManager, WiFi chip firmware) being built from modified sources (as well as the kernel and u-boot).
-Current version is Debian Bookworm.
-'''Download location'''
+==== Download ====
-[https://images.mobian-project.org/pinephone/nightly/ Nightly] /
+* [https://images.mobian.org/pinephone/ Images] (top directory: ''Debian/stable''; "weekly" directory: ''Debian/testing'')
-[https://images.mobian-project.org/pinephone/installer/ Installer] /
-[https://images.mobian-project.org/pinephone/ Stable]
-Extract the image before installing:
+{{Info|[https://tow-boot.org/devices/pine64-pinephoneA64.html Tow-Boot is required] to be able to boot the images!}}
- $ gzip -d Downloads/mobian-pinephone-*.img.gz
+{| class="wikitable"
+!colspan="2" style="background: #a7d7f9;"| Default credentials
-See the [https://wiki.mobian-project.org/doku.php?id=install project page] for specific installation instructions.
+|-
+! Default user
-'''username/password'''
+| <code>mobian/1234</code>
+|}
-mobian/1234
-'''What works, what does not work'''
-See [https://gitlab.com/mobian1/mobian-recipes/-/blob/master/README.md the project's README file] or [https://wiki.mobian-project.org/doku.php?id=pinephone the wiki] for most up to date status.
-Check [https://gitlab.com/groups/mobian1/-/issues bug tracker] for known issues. Questions? Ask on our [https://forum.pine64.org/showthread.php?tid=9016 thread].
-'''How to contribute and report defects'''
+==== Notes ====
+* Development is active. See [https://wiki.debian.org/Mobian the Mobian wiki].
+* In order to connect to the device using SSH/SCP via WiFi, you need to install SSH on the device. You can do this by executing the following in a shell: "sudo apt-get install ssh", afterwards you can connect via SSH/SCP via WiFi using the PinePhone's IP address on port 22.
-It is recommended that you log your bug reports in [https://gitlab.com/mobian1/issues the project's issue tracker].
+----
-As a general rule, issues with third-party apps (even the default ones) should be reported upstream.
-A Mobian issue would be related to getting the hardware to work on the PinePhone,
-but if unsure where the issue should be reported just open a ticket or ask.
-Feel free to pick an open issue to work on, or send a merge request on [https://gitlab.com/mobian1 Gitlab].
-'''Notes'''
+=== Multi-distro demo image ===
-See [https://wiki.mobian-project.org/doku.php?id=start the wiki] for additional information regarding screen resolution, USB networking, WiFi hotspot, Chatty and the repository.
+{{Warning|This is a demo image for testing different operating systems before installing a regular image. Attempting to use this image productively is highly discouraged. The kernel is shared across the different operating systems and is not updated.}}
-== Multi-distro demo image ==
+This image allow users to try many Linux distributions easily, without having to figure out how to flash them individually and juggle with many microSD cards. Also called megi's 15-in-1 multi boot image.
-{{Warning | This is an demo image for testing different OSes before installing a regular image. It is highly discouraged attempting to use the image productively. The kernel is shared across the different OSes and is not being updated.}}
-This image allow users to try many of the above Linux distributions easily, without having to figure out how to flash them individually and juggle with many microSD cards. Also called megi's 15-in-1 multi boot image.
 * Main page: https://xnux.eu/p-boot-demo/
 * Git repo: https://megous.com/git/pinephone-multi-boot/
-* Forum discussion: [https://forum.pine64.org/showthread.php?tid=11347 UPDATED (June 2021): 17-distro multi-boot image for Pinephone (incl. 3GiB variant)]
+* Forum discussion: [https://forum.pine64.org/showthread.php?tid=11347 15-distro multi-boot image for Pinephone]
+==== Download ====
-'''Update 2021-06-02, using megi's kernel 5.13-rc4'''
+'''Update 2022-01-26, using megi's kernel 5.16.2'''
 DD image to SD card and boot. This image is for 16GiB or larger SD cards, also works if flashed to eMMC.
@@ Line 309: / Line 302: @@
 For more info on this build, please visit its entry the "News" section of its [https://xnux.eu/p-boot-demo/ web page].
-* [http://dl.xnux.eu/p-boot-multi-2021-06-02.torrent Download torrent file from author's website]
+* [https://dl.xnux.eu/p-boot-multi-2022-01-26.torrent Download torrent file from author's website]
-* [http://dl.xnux.eu/p-boot-multi-2021-06-02/ Download img.zst from author's website] (speed limited to 512KiB/s)
+* [http://dl.xnux.eu/p-boot-multi-2022-01-26/ Download img.zst from author's website] (speed limited to 512KiB/s)
 * [http://mirror.uxes.cz/dl.xnux.eu/ Download torrent and img.zst from discord user uxes' mirror]
 ** '''File name:''' multi.img.zst
-** '''SHA-256:''' <span style="word-break: break-all">9b099cdfece3ba862348ca32af6c51a41a1d161b1d897f9928ae8be3c824a0b6</span>
+** '''SHA-256:''' <span style="word-break: break-all">39915b9d2aa2f33fd78552ac9a0e665c4aef97dd68a9f9a6c76f9fa2f0ac049e</span>
-** '''File Size:''' 6.57GiB
+** '''File Size:''' 6.9GiB
-* [https://files.pine64.org/os/PinePhone/Multi/p-boot-multi-2021-06-02.img.gz Direct download img.gz from pine64.org] (re-zipped from zstd to gzip)
-** '''File name:''' p-boot-multi-2021-06-02.img.gz
-** '''MD5:''' 2abdaafb01dd7519f678b5a7c6538493
-** '''File Size:''' 6.8GB
 Due to its size, download though torrent is suggested by the author on its main page.
-{{hint | '''Note about .zst archive file:'''
+{| class="wikitable"
+!colspan="2" style="background: #a7d7f9;"| Default credentials
+|-
+! General
+| <code>1111</code>
+|-
+! sxmo
+| <code>user/1111</code>
+|-
+! Manjaro
+| seems to insist on <code>123456</code>
+|}
-On Linux, you may install or compile <code>zstd</code>, and write the image to SD card by using <code>zstdcat</code> and <code>dd</code>. See the "Installation" section of its [https://xnux.eu/p-boot-demo/ web page] for command examples.
+==== Notes ====
-On Windows, you may use [https://github.com/mcmilk/7-Zip-zstd 7-zip-zstd], it provides different installation method in the README.md. Install and extract the .img file from the zst archive, and flash with tools like [https://sourceforge.net/projects/win32diskimager/ Win32 Disk Imager].
+{{Info | Note about zstd) archive file (<code>.zst</code>):
-Also see [[PinePhone Installation Instructions]].
+On Linux, you may install or compile <code>zstd</code>, then write the image to SD card by piping <code>zstdcat</code> and <code>dd</code>. See the "Installation" section of its [https://xnux.eu/p-boot-demo/ web page] for command examples.
-}}
+On Windows, instead of the offical [https://github.com/facebook/zstd zstd] command line program, you may use [https://github.com/mcmilk/7-Zip-zstd 7-zip-zstd]. Different installation method is provided in their README. Install 7-Zip-zstd / zstd, extract the disk image file (<code>.img</code>) from the zstd archive, and flash with tools like [https://sourceforge.net/projects/win32diskimager/ Win32 Disk Imager].}}
-'''username/password'''
+Also see [[PinePhone Installation Instructions]].
-All passwords, including root passwords, are <code>1111</code>.
+----
-sxmo username is <code>user</code>.
-== Nemo Mobile ==
+=== Nemo Mobile ===
 [[File:nemo_mobile.png|right|100px]]
-Nemo Mobile is the open source build of Sailfish OS with a open source UI called [http://nemomobile.net/glacier-home/ Glacier] ([https://wiki.merproject.org/wiki/Nemo/Glacier Mer Wiki]), [http://nemomobile.net/pages/Hello_manjaro/ based on Manjaro].
+Nemo Mobile is the open source build of Sailfish OS with a open source UI called [http://nemomobile.net/glacier-home/ Glacier], [http://nemomobile.net/pages/Hello_manjaro/ based on Manjaro].
-* Website: [https://nemomobile.net/ Nemo Mobile UX team]
+==== Download ====
-* [https://wiki.merproject.org/wiki/Nemo Mer Wiki page]
-'''Download location'''
+[https://img.nemomobile.net/2022.05/Manjaro-ARM-nemomobile-pinephone-0.9.img.xz Image]
-See the [https://nemomobile.net/installation/ installation page] on their website for the newest release and installation guides.
+{| class="wikitable"
+!colspan="2" style="background: #a7d7f9;"| Default credentials
+|-
+! Default user
+| <code>manjaro/123456</code>
+|-
+! root
+| <code>root/root</code>
+|}
-'''What works, what does not work'''
+==== Notes ====
+The website of the Nemo Mobile UX Team can be found [https://nemomobile.net/ here]. Please report bugs regarding the Nemo Mobile UI as [https://github.com/nemomobile-ux/main/issues GitHub issue].
-Development is now moving very fast after rebasing. For the current devel image, Wifi and Bluetooth works.
+----
-'''How to contribute and report defects'''
+=== NixOS ===
+[[File:NixOS.webp|right|100px]]
-For the Nemo Mobile UX itself:
+NixOS is a Linux distribution built on top of the Nix package manager using declarative configuration to allow reliable system upgrades.
-* GitHub issues: https://github.com/nemomobile-ux/main/issues
-For hardware:
+==== Download ====
-* GitHub issues: https://github.com/neochapay/nemo-device-dont_be_evil/issues
+There is a guided installer by the [https://mobile.nixos.org/devices/pine64-pinephone.html Mobile NixOS] project available. An installer image that can be flashed to a sdcard can be downloaded from the [https://hydra.nixos.org/job/mobile-nixos/unstable/installer.pine64-pinephone Hydra build instance].
-== NixOS ==
+Users that want to build a local image, are expected to follow the instructions in the [https://mobile.nixos.org/getting-started.html Getting Started page],
-[[File:nixos.png|right|100px]]
-NixOS support is handled through the Mobile NixOS project.
-* Project home page: [https://mobile.nixos.org/ Mobile NixOS]
-* PinePhone device page: [https://mobile.nixos.org/devices/pine64-pinephone.html Pine64 PinePhone — Mobile NixOS]
-* GitHub: [https://github.com/NixOS/mobile-nixos NixOS/mobile-nixos]
-There is no pre-built complete image.
-For now users, are expected to follow the instructions in the [https://mobile.nixos.org/getting-started.html Getting Started page],
 and [https://mobile.nixos.org/devices/pine64-pinephone.html Project's device page].
-'''What works, what does not work'''
+==== Notes ====
+Project home page: [https://mobile.nixos.org/ Mobile NixOS]
-Currently, it boots, it's just as compatible as the Android-based devices are with Mobile NixOS.
-It even supports a bit more since it can use WiFi.
-Support for all of the hardware will be coming, this project is a breadth-first work, where the work spans multiple devices in parallel.
-'''How to contribute and report defects'''
-On [https://github.com/NixOS/mobile-nixos/issues the project's repository].
-Please specify that you are using a PinePhone when reporting issues.
-Details about contributions and donations are on the [https://nixos.org/nixos/community.html NixOS website].
-== OpenMandriva Lx ==
+----
-[[File:Oma-logo-22042013_300pp.png|right|100px]]<!--
--->{{Hint| '''Note:''' This image is solely for testing purposes.}}<!--
+=== OpenMandriva Lx ===
+[[File:Oma-logo-22042013_300pp.png|right|100px]]
--->OpenMandriva Lx with Plasma Mobile as UI.
+OpenMandriva Lx with Plasma Mobile as UI.
-'''Download location'''
+==== Download ====
 The official image can be found [https://sourceforge.net/projects/openmandriva/files/release/4.2/RC/Pinephone/ at sourceforge.net].
 See [https://www.openmandriva.org/en/news/article/openmandriva-lx-4-3-rc-available-for-testing here] for the offical announcement.
-'''What works, what does not work'''
+==== Notes ====
+{{Info| This image is solely for testing purposes.}}
-From the [https://www.openmandriva.org/en/news/article/openmandriva-lx-4-3-rc-available-for-testing 4.3 announcement],
+----
-in future updates (4.3 and later), "Phone calls are working, and we have rewritten the camera app to be far more useful".
-== openSUSE ==
+=== openSUSE ===
 [[File:SLEM-OS-logo.png|right|100px]]
@@ Line 415: / Line 402: @@
 Using [https://en.opensuse.org/SDB:DNF dnf] is possible, if preferred.
-'''Download links'''
+==== Download ====
 * [https://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/PinePhone/images/openSUSE-Tumbleweed-ARM-PHOSH-pinephone.aarch64.raw.xz Phosh] / [https://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/PinePhone/images/openSUSE-Tumbleweed-ARM-PHOSH-pinephone.aarch64.raw.xz.sha256 SHA-256] / [https://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/PinePhone/images/openSUSE-Tumbleweed-ARM-PHOSH-pinephone.aarch64.raw.xz.sha256.asc SHA-256 Signature]
@@ Line 425: / Line 412: @@
 You can find install instructions at [https://en.opensuse.org/HCL:PinePhone#Installing_openSUSE_in_a_Pinephone this section] in the openSUSE Wiki.
-'''Username/Password'''
+{| class="wikitable"
+!colspan="2" style="background: #a7d7f9;"| Default credentials
+|-
+! Default user
+| <code>pine/1234</code>
+|-
+! root
+| <code>root/linux</code>
+|}
-The login credentials are pine/1234 and root/linux.
+==== Notes ====
-Change (or disable) the root password once you are set up.
-'''What works and what does not work'''
 You can find all information about the releases of the project [https://gitlab.com/slem.os/slem.os/-/blob/master/CHANGELOG.md here].
@@ Line 436: / Line 428: @@
 You will also find information in our wiki on how to report issues (Contributing section).
-== postmarketOS ==
+----
-[[File:PostmarketOS-logo.png|right|100px]]
+=== postmarketOS ===
+[[File:PostmarketOS_logo.png|right|100px]]
 postmarketOS extends [https://www.alpinelinux.org/ Alpine Linux] to run on smartphones and other mobile devices.
 It offers various user interfaces (Phosh, Plasma Mobile, Sxmo, Plasma Desktop, Gnome 3, Kodi, XFCE4, ...).
+==== Download ====
+[https://postmarketos.org/download/ Download page]
+{| class="wikitable"
+!colspan="2" style="background: #a7d7f9;"| Default credentials
+|-
+! Test images user
+| <code>user/147147</code>
+|}
+==== Notes ====
 As of writing, official images are provided with Phosh, Plasma Mobile and Sxmo.
 The official images come in two flavors, either as a test image to try out postmarketOS, or with the installer.
@@ Line 451: / Line 456: @@
 Power users may also create their own image with the distribution's install and development tool <code>pmbootstrap</code>.
-Please read the detailed [https://wiki.postmarketos.org/wiki/PINE64_PinePhone_(pine64-pinephone)#Installation installation instructions] in the wiki.
+See the [https://wiki.postmarketos.org/wiki/PINE64_PinePhone_(pine64-pinephone) pine64-pinephone] page of the postmarketOS wiki for details.
-'''Download location'''
+----
-* [https://postmarketos.org/download/ Download page]
+=== Rhino Linux ===
-* [https://wiki.postmarketos.org/wiki/PINE64_PinePhone_(pine64-pinephone)#Installation Flashing instructions]
+[[File:rhino-linux-logo.png|right|100px]]
-'''Username/password'''
+Rhino Linux is an Ubuntu-based distribution that uses the rolling-release model by tracking the <code>devel</code> branch of repositories. The port is currently maintained by Oren Klopfer (oklopfer).
-* Test images: user/147147
+Tow-Boot is required for installing Rhino Linux. Instructions for installing Tow-Boot to the PinePhone can be found [https://tow-boot.org/devices/pine64-pinephoneA64.html here]. After Tow-Boot has been installed to your device, Rhino Linux installation just requires flashing the <code>.img.xz</code> to an SD or the eMMC.
-* When using the installer images or building an image with pmbootstrap, you set your own username and password.
-** The Phosh and Plasma Mobile lock screens only support numeric keyboard, so you should '''only use numbers''' in your password.
-'''What works, what does not work'''
+==== Download ====
+[https://rhinolinux.org/download.html Rhino Linux Downloads] (select Pine64 on the dropdown)
-See the [https://gitlab.com/postmarketOS/pmaports/-/issues?label_name%5B%5D=device-pine64-pinephone issue tracker].
+{| class="wikitable"
+!colspan="2" style="background: #a7d7f9;"| Default credentials
-'''How to contribute and report defects'''
+|-
+! Default user
+| <code>rhino/1234</code>
+|}
-[https://gitlab.com/postmarketOS/pmaports/-/issues?label_name%5B%5D=device-pine64-pinephone postmarketOS issue tracker] for PinePhone support.
+==== Notes ====
-See [https://wiki.postmarketos.org/wiki/Contributing postmarketOS wiki] for options to contribute.
+Foundational to the distribution is [https://pacstall.dev Pacstall], a Debian-based user repository inspired by the AUR. Additionally, RL comes with [https://rhinolinux.org/unicorn/ Unicorn], a custom modified version of XFCE with various modernizations and improvements, including auto-rotation for mobile devices.
-== PureOS ==
+[https://discord.gg/reSvc8Ztk3 Discord] - [https://matrix.to/#/#rolling-rhino-remix:matrix.org Matrix] - [https://github.com/rhino-linux GitHub] - [https://rhinolinux.org/wiki.html Wiki]
-[[File:Pureos.png|right|100px]]
-{{Warning|This project is no longer under development and has been abandoned. Use [https://wiki.pine64.org/wiki/PinePhone_Software_Releases#Mobian Mobian] instead}}
+----
-{{Hint|There is no prebuilt image, you'll need a Linux environment and build the image yourself.}}
+=== Sailfish OS ===
+[[File:SailfishOS_logo.png|right|100px]]
-[https://www.pureos.net/ PureOS] is a user friendly, secure and freedom respecting GNU/Linux distribution based on Debian and GNOME developed by the Purism community.
-* [https://tracker.pureos.net/w/ PureOS Wiki], no PinePhone page there
-* Mobile-optimized apps list from the [https://tracker.pureos.net/w/pureos/mobile_optimized_apps/ Software Center in PureOS] and [https://tracker.pureos.net/w/pureos/3rd-party_mobile_optimized_apps/ 3rd party repos]
-* [https://github.com/rufferson/pureos-pinephone current PinePhone PureOS repo], A script to convert Librem5 PureOS to PinePhone Pure-OS
-'''Download location'''
-Use [https://raw.githubusercontent.com/rufferson/pureos-pinephone/master/build_image.sh the convert script] to download and build the image from u-boot, PinePhone linux kernel and Librem5 PureOS.
-Also see:
-* [https://forums.puri.sm/t/successful-installation-of-pureos-on-pinephone/8741/12 Successful installation of PureOS on PinePhone - PureOS - Purism community]
-* The PureOS section of [https://www.ruff.mobi/go/mobi/pine.html PinePhone page] on ruff.mobi
-* An [https://gitlab.com/a-wai/debos-pinephone archived repo] for PureOS on PinePhone
-* A [https://mozzwald.com/pp/ file list] with [https://mozzwald.com/pp/pureos-pinephone-build-instructions.txt pureos pinephone build instructions] on mozzwald.com
-== Sailfish OS ==
-[[File:Sailfish_logo.png|right|100px]]
 [https://sailfishos.org/ Sailfish OS] is a Linux-based operating system based on open source projects such as [https://wiki.merproject.org/wiki/Main_Page Mer], and a closed source UI based on [https://sailfishos.org/wiki/Lipstick Lipstick].
@@ Line 505: / Line 493: @@
 * [https://gitlab.com/sailfishos-porters-ci/dont_be_evil-ci/ Sailfish OS repo]
-'''Download location'''
+==== Download ====
 '''Flashing script'''
@@ Line 523: / Line 511: @@
 * When asked where to flash, type 'raw' and it will build the image on your computer. Otherwise define the path /dev/....  to flash to card or internal emmc.
 '''username/password'''
 Set PIN on initialization.
+==== Notes ====
 * Sometimes the first run stalls before the tutorial. Reboot and it will start from setting the security pin.
@@ Line 541: / Line 530: @@
 '''How to contribute and report defects'''
+See the documentation wiki at [https://github.com/sailfish-on-dontbeevil/documentation/wiki the github project] for help and links.
 See the [https://wiki.merproject.org/wiki/Adaptations/PinePhone64#Installation Installation section] on the Mer Wiki's PinePhone Page for compile, build and development.
@@ Line 555: / Line 546: @@
 OTA is supported: <code>zypper refresh && zypper update</code> as root (<code>devel-su</code> to get root access). Things that need reflash are bootloader specific at the moment. If improvements like [[Crust]] or changes of partition layout are added, then you need to reflash.
+----
-== SkiffOS ==
+=== SkiffOS ===
 [[File:SkiffOS-Icon-1.png|right|100px]]
-Minimal in-memory cross-compiled OS optimized for hosting multiple in parallel Docker containers.
+Minimal in-memory cross-compiled OS optimized for hosting multiple in parallel Docker containers. Provides the reliability of firmware with the ease-of-use of package managers.
+==== Download ====
-Provides the reliability of firmware with the ease-of-use of package managers.
+The repository and instructions can be found [https://github.com/skiffos/SkiffOS/tree/master/configs/pine64/phone here].
+==== Notes ====
 Upgrade over-the-air via a simple rsync script, or copying 3 files.
@@ Line 570: / Line 566: @@
 {| class="wikitable"
-! core/pinephone_neon    || KDE Neon via Ubuntu repositories
+! Package
+! Distro
 |-
-! core/pinephone_nixos   || Nixos Mobile
+| core/pinephone_neon
+| KDE Neon via Ubuntu repositories
 |-
-! core/pinephone_gentoo  || Gentoo with Link-time Optimization & KDE Mobile or Phosh
+| core/pinephone_nixos
+| Nixos Mobile
 |-
-! core/pinephone_ubports || Ubuntu Ports for PinePhone
+| core/pinephone_gentoo
+| Gentoo with Link-time Optimization & KDE Mobile or Phosh
 |-
-! core/pinephone_manjaro_kde   || Manjaro for PinePhone: KDE variant
+| core/pinephone_ubports
+| Ubuntu Ports for PinePhone
 |-
-! core/pinephone_manjaro_phosh || Manjaro for PinePhone: Phosh variant
+| core/pinephone_manjaro_kde
+| Manjaro for PinePhone: KDE variant
 |-
-! core/pinephone_manjaro_lomiri || Manjaro for PinePhone: Lomiri variant
+| core/pinephone_manjaro_phosh
+| Manjaro for PinePhone: Phosh variant
+|-
+| core/pinephone_manjaro_lomiri
+| Manjaro for PinePhone: Lomiri variant
 |}
 The boot-up OS is upgraded independently from the containers.
-'''Download location'''
+----
+=== Slackware ===
+[https://arm.slackware.com/ Slackware] is the world's oldest actively developed Linux distribution, providing a modern user land (applications) and Linux Kernel, within a more classic Unix Operating System environment.
-The repository and instructions can be found [https://github.com/skiffos/SkiffOS/tree/master/configs/pine64/phone here].
+==== Download ====
+* http://dl.fail.pp.ua/slackware/images/pinephone/
+==== Notes ====
-== Sxmo ==
+Discussion: [https://forum.pine64.org/showthread.php?tid=12181&highlight=slackware+pinephone Thread]
-A collection of Suckless programs to create a mobile UI. Based on postmarketOS.
+----
-'''Download location'''
+=== Ubuntu Touch ===
+[[File:Ubports-logo.png|right|100px]]
-Sxmo images can be found [https://images.postmarketos.org/bpo/ here] (in the ''/pine64-pinephone/sxmo/'' sections respectively).
+A Mobile Version of the Ubuntu Operating System made and maintained by the UBports Community. The port is currently maintained by Oren Klopfer (oklopfer).
-'''username/password'''
+Tow-Boot is required for installing the latest version of Ubuntu Touch (20.04) on the PinePhone. Instructions for installing Tow-Boot to the PinePhone can be found [https://tow-boot.org/devices/pine64-pinephoneA64.html here].
-user/147147
+Installation instructions can be found at
+[https://ubports.com/en/blog/ubports-news-1/post/pinephone-and-pinephone-pro-3889 this UBports post]. After Tow-Boot has been installed to your device, Ubuntu Touch installation just requires flashing the <code>.img.xz</code> to an SD or the eMMC.
-'''How to contribute and report defects'''
+==== Download ====
-Contributing information is listed [https://git.sr.ht/~mil/sxmo-docs/tree/master/CONTRIBUTING.md here].
+[https://gitlab.com/ook37/pinephone-pro-debos/-/releases UBports 20.04 PinePhone Latest Releases]
-== Ubuntu Touch ==
+[https://devices.ubuntu-touch.io/device/pinephone/release/focal UBports PinePhone Device Info]
-[[File:Ubports-logo.png|right|100px]]
-A Mobile Version of the Ubuntu Operating System made and maintained by the UBports Community.
+{| class="wikitable"
+!colspan="2" style="background: #a7d7f9;"| Default credentials
+|-
+! Default user
+| Set during boot
+|-
+! root
+| <code>phablet/1234</code>
+|}
-Ubuntu touch is a mobile version of Ubuntu developed by the UBports community.
+==== Notes ====
-Installation instructions can be found on
-[https://gitlab.com/ubports/community-ports/pinephone#how-do-i-install-ubuntu-touch-on-my-pinephone the UBports PinePhone project].
-There is also a [https://github.com/goddard/pinephone/ script] to download the latest image and flash to your PinePhone.
-In the future, Ubuntu Touch will be able to be installed onto the PinePhone with the [https://devices.ubuntu-touch.io/installer UBports installer] GUI tool.
-'''Download location'''
+Scroll down to the middle of [https://gitlab.com/ook37/pinephone-pro-debos/ the GitLab project page], or directly here [https://devices.ubuntu-touch.io/device/pinephone/release/focal/#deviceOverview at the UBports website] to see which features work.
-[https://gitlab.com/ubports/community-ports/pinephone#how-do-i-install-ubuntu-touch-on-my-pinephone UBports PinePhone project]
+Contributions and bug reports can be made at the [https://gitlab.com/ook37/pinephone-pro-debos/ UBports PinePhone GitLab page]. See [https://ubports.com/foundation/sponsors UBports website] for how to donate.
-'''username/password'''
+== Further Releases ==
-Set up during boot
+=== Apache NuttX RTOS ===
-'''What works, what does not work'''
+[https://nuttx.apache.org/docs/latest Apache NuttX RTOS] is a Real-Time Operating System that supports PinePhone
-Scroll down to the bottom of [https://gitlab.com/ubports/community-ports/pinephone this page].
+* [https://nuttx.apache.org/docs/latest/platforms/arm/a64/boards/pinephone/index.html Apache NuttX RTOS on PINE64 PinePhone]
-'''How to contribute and report defects'''
+=== Sculpt Operating System (Genode OS Framework) ===
-See [https://gitlab.com/ubports/community-ports/pinephone UBports gitlab page].
+[https://genode.org/news/sculpt-os-release-23.04 Sculpt OS since version 23.04] supports PinePhone.
-See [https://ubports.com/foundation/sponsors UBports website] for how to donate.
+Ready-to-use system image available on the [https://genode.org/download/sculpt download page].
-= Tools =
+== Tools ==
 There are software tools, that can be booted on the PinePhone.
-== JumpDrive ==
+=== JumpDrive ===
 JumpDrive can be used to flash the eMMC (and the microSD card), see [[PinePhone Installation Instructions#Using JumpDrive]].
@@ Line 646: / Line 665: @@
 Make sure to download the "PinePhone" image and to unpack the archive before flashing.
-= Factory Test OS =
+----
+=== Tow-Boot ===
+Tow-Boot is a more user-friendly distribution of U-Boot. Can also mount internal storage as USB Mass Storage by holding the volume up button at startup before and during the second vibration and the LED will turn blue if done successfully.
+See https://github.com/Tow-Boot/Tow-Boot/releases for the latest image.
+Make sure to download the image with pinephoneA64 in the name.
+== Hardware test build ==
+{{Warning|The factorytest image for hardware testing appears to be no longer maintained.}}
-{{Hint|'''Note:''' The magnetometer test will fail on the new Beta Edition, as the factory image wasn't updated for it yet.}}
+On the Braveheart model, there was a postmarketOS based basic Factory Test OS pre-installed on the eMMC. The developer Martijn Braam from postmarketOS has improved the functionality of the image considerably later. Since the 20200501 version, it is able to test all the hardware. It also includes functionality to install a new OS to the eMMC when using with an test image that includes that OS image. The downloadable image just does the hardware tests. Do not flash eMMC to test your device, just flash it to microSD and test from there. New versions are distributed as part of the postmarketOS distribution.
-On the Braveheart model, there was a postmarketOS based basic Factory Test OS pre-installed on the eMMC.
+{{Info|The magnetometer test will fail on the new Beta Edition, as the factory image wasn't updated for it yet.}}
-The developer Martijn Braam from postmarketOS has improved the functionality of the image considerably later.
-Since the 20200501 version, it is able to test all the hardware.
-It also includes functionality to install a new OS to the eMMC when using with an test image that includes that OS image.
-The downloadable image just does the hardware tests.
-Do not flash eMMC to test your device, just dd it to microSD and test from there.
-New versions are distributed as part of the postmarketOS distribution.
 Links:
-* [https://images.postmarketos.org/pinephone/ Software Images] (download the latest one named like pine-pinephone-yyyyMMdd-factorytestX.img.xz)
+* [https://images.postmarketos.org/pinephone/ Software Images] ('''NOTE:''' Link is is broken) (download the latest one named like pine-pinephone-yyyyMMdd-factorytestX.img.xz)
 * [https://gitlab.com/MartijnBraam/factorytest Git repo]
 * [https://gitlab.com/MartijnBraam/factorytest/-/blob/master/README.rst Documentation]
-== Factory-loaded OS builds ==
+== Historic factory builds ==
 These are different operating system builds that was preloaded in the factory with testing utility.
@@ Line 671: / Line 696: @@
 All the download links below are direct download from pine64.org.
+{{Warning|These images are for testing purposes only. If you are looking for an up-to-date image please select one from the [[#Software Releases|software releases]] section instead.}}
 <div style="overflow: auto;">
 {| class="wikitable" style="white-space: nowrap"
-! OS
+! Distribution
 ! Download Link
 ! File Size
@@ Line 711: / Line 738: @@
 </div>
-= Installing other ARM64 distributions =
+== Installing other ARM64 distributions ==
-{{Warning|Distributions not on this page may not even boot after you follow this section. In the best case, they will be barely usable.
+Other ARM64 distributions might be installed as well, however this requires some tinkering and may not work well.
+{{Info|Distributions not on this page may not even boot after you follow this section. In the best case, they will be barely usable.
 This is more for fun, or if you would like to port a new distribution to the PinePhone.}}
-{{Hint|'''Note:''' This section uses megi's kernel releases, and not the official ones from Pine64. While it is possible to use the official (and in the future, mainline) kernel, megi provides binary releases, which makes it very easy.}}
 General steps:
@@ Line 727: / Line 754: @@
 If you would like to see examples or specific commands for how to complete these steps, see:
 * [https://github.com/nikhiljha/pp-fedora-sdsetup     an example for Fedora], current unofficial [#Fedora] release
 * [https://xnux.eu/howtos/install-arch-linux-arm.html an example for Arch Linux] by megi
-= Other Resources =
+== Other Resources ==
 Community
 * [[Main_Page#Community_and_Support|Links to the community services]]
 Hardware information
 * [[PinePhone|General PinePhone hardware info]] in this Pine64 wiki
-* Details specific to the Braveheart Edition: [[PinePhone_v1.1_-_Braveheart|PinePhone 1.1 Braveheart hardware details]]
+* Details specific to the Braveheart Edition: [[PinePhone v1.1 - Braveheart|PinePhone 1.1 Braveheart hardware details]]
-* Details specific to the Community Edition: [[PinePhone_v1.2|PinePhone 1.2 hardware details]]
+* Details specific to the Community Edition: [[PinePhone v1.2|PinePhone 1.2 hardware details]]
 * The postmarketOS wiki has a detailed page on the PinePhone hardware [https://wiki.postmarketos.org/wiki/PINE64_PinePhone_(pine64-pinephone) here] and the preceding devkit [https://wiki.postmarketos.org/wiki/PINE64_Don%27t_be_evil_devkit_(pine64-dontbeevil) here]
 Other software information
 * [https://linux-sunxi.org/Main_Page sunxi community wiki]
 * [https://xnux.eu/devices/pine64-pinephone.html megi's feature/driver support matrix]
@@ Line 747: / Line 779: @@
 Other
 * [https://pine64.com/?post_type=product Pine64 shop]
 * [https://www.pine64.org/2020/01/24/setting-the-record-straight-pinephone-misconceptions/ Pine64 blog on blobs]

Difference between revisions of "PinePhone Software Releases"

Latest revision as of 14:11, 6 October 2024

Software Releases

Arch Linux ARM

Download

Notes

ExpidusOS

Download

Notes

Fedora

Download

Notes

Gentoo

Download

Notes

GloDroid

Download

Notes

Kali Linux

Download

Notes

LuneOS

Download

Notes

Maemo Leste

Download

Notes

Manjaro ARM

Download

Notes

Mobian

Download

Notes

Multi-distro demo image

Download

Notes

Nemo Mobile

Download

Notes

NixOS

Download

Notes

OpenMandriva Lx

Download

Notes

openSUSE

Download

Notes

postmarketOS

Download

Notes

Rhino Linux

Download

Notes

Sailfish OS

Download

Notes

SkiffOS

Download

Notes

Slackware

Download

Notes

Ubuntu Touch

Download

Notes

Further Releases

Apache NuttX RTOS

Sculpt Operating System (Genode OS Framework)

Tools

JumpDrive

Tow-Boot

Hardware test build

Historic factory builds

Installing other ARM64 distributions

Other Resources

Navigation menu

Search