Difference between revisions of "PineNote: Getting Started"

From PINE64
Jump to navigation Jump to search
 
(15 intermediate revisions by 3 users not shown)
Line 2: Line 2:


This page is a work in progress. Its goals are to help users get their devices up and running while minimizing redundancy with other pages (e.g., Documentation, Development), and to synthesize information provided in existing guides. Sections below represent a rough outline and will need to be expanded with details and further instructions.
This page is a work in progress. Its goals are to help users get their devices up and running while minimizing redundancy with other pages (e.g., Documentation, Development), and to synthesize information provided in existing guides. Sections below represent a rough outline and will need to be expanded with details and further instructions.


== Who Can Contribute ==
== Who Can Contribute ==


Anyone! Generally, the PineNote is in a very early state, and at least an intermediate level of linux knowledge is probably necessary to be able to do anything at this moment. That said, there are multiple efforts happening at once, and there are a number of ways a person of any skill level can help:
Anyone! Generally, the PineNote is in a very early state, and at least an intermediate level of linux knowledge is probably necessary to be able to do anything at this moment. That said, there are multiple efforts happening at once, and there are a number of ways a person of any skill level can help:
# Join in the ongoing documentation effort here: [[PineNote Documentation]].
# Join in the ongoing documentation effort
# Help mainline the kernel by testing, fixing bugs.
# Help mainline the kernel by testing, fixing bugs.


Line 47: Line 46:
* UART dongle
* UART dongle


=== Stock Partition Layout ===
== "Table of Contents" for Linux Installation Pages ==
Backups: https://pwarren.id.au/pinenote/partitions/


Copied from DorianRudolph's github instructions (link at the end of this document):
=== Building Kernel ===
<pre>
[[PineNote Development/Building Kernel]]
> rkdeveloptool list-partitions                     
#  LBA start (sectors)  LBA end (sectors)  Size (bytes)      Name               
00                16384              24575      4194304      uboot
01                24576              32767      4194304      trust
02                32768              36863      2097152      waveform
03                36864              45055      4194304      misc
04                45056              53247      4194304      dtbo
05                53248              55295      1048576      vbmeta
06                55296            137215      41943040      boot
07              137216            145407      4194304      security
08              145408            407551    134217728      recovery
09              407552            1193983    402653184      backup
10              1193984            3291135    1073741824      cache
11              3291136            3323903      16777216      metadata
12              3323904            9697279    3263168512      super
13              9697280            9730047      16777216      logo
14              9730048            9861119      67108864      device
15              9861120          241827775  118766927872      userdata
</pre>


== General Overview of Linux Installation Process ==
=== Booting Linux===
Todo: This section should provide instructions for using UART, adb and rkdeveloptool on the Pinenote for users unfamiliar with or new to any of them.


=== Prerequisites ===
[[PineNote Development/Booting Linux]]
* This section should provide the user with a listing of required software, e.g., for cross-compiling; communicating via UART, etc.
* The following sections should walk the user through the process of going from a factory-fresh device to a functional e-ink tablet running linux.


== Setting up Partitions ==
Additional useful references:
=== Possible configurations for ===
* dual boot
* linux alone
 
== Modifying the Bootloader ==
 
Without modifying the bootloader, u-boot will automatically load android. Under these circumstances, an alternative OS may be loaded by manually inputting commands to the u-boot terminal, which must be accessed by sending an interrupt signal (ctrl+c) to the device via UART during boot. Thus modifying u-boot is not, strictly speaking, necessary but will be desirable for most users wishing to use linux as their primary OS in a dual boot arrangement.
 
There exists more than one approach to avoid having to do this each time the device is restarted. Two of these are detailed below.
 
=== Option 1: Build U-boot from Scratch ===
reference: https://github.com/JoshuaMulliken/pinenote_uboot
 
=== Option 2: Extract and Modify Existing U-boot Image ===
reference: https://gist.github.com/charasyn/206b2537534b6679b0961be64cf9c35f
 
== Installing Linux ==
References:
* https://github.com/DorianRudolph/pinenotes
* https://github.com/DorianRudolph/pinenotes
* https://musings.martyn.berlin/dual-booting-the-pinenote-with-android-and-debian
* https://musings.martyn.berlin/dual-booting-the-pinenote-with-android-and-debian
* https://wiki.postmarketos.org/wiki/PINE64_PineNote_(pine64-pinenote)


=== Kernel Compilation ===
=== OS Installation ===
(for now, see links above)
See [[PineNote Software Releases]]
Additional information on experimental patch(es):
* https://github.com/m-weigand/mw_pinenote_misc


== Choosing Your GUI ==
=== Configuring OS and Apps ===
[[PineNote Development/Apps]]


== Tweaks and Useful Apps ==
== Links to dotfiles, configuration examples, etc. ==
=== Links to dotfiles, configuration examples, etc. ===
* Sway config, Mesa for hardware-acceleration using GPU, KO reader : https://github.com/0cc4m/pinenote-misc
* Sway config, Mesa for hardware-acceleration using GPU, KO reader : https://github.com/0cc4m/pinenote-misc
* Setting up X: https://musings.martyn.berlin/setting-up-x-on-the-pinenote-in-debian-with-touchscreen-onboard-keyboard-and
* Setting up X: https://musings.martyn.berlin/setting-up-x-on-the-pinenote-in-debian-with-touchscreen-onboard-keyboard-and
Line 116: Line 71:
* Vim config: https://github.com/m-weigand/mw_pinenote_misc/tree/main/vim
* Vim config: https://github.com/m-weigand/mw_pinenote_misc/tree/main/vim
* Xournal++, nwg and libinput tweaks: https://gitlab.com/hrdl/pinenote-shared/
* Xournal++, nwg and libinput tweaks: https://gitlab.com/hrdl/pinenote-shared/
[[Category:PineNote]]

Latest revision as of 18:35, 20 February 2023

This page or section is under construction

Please help to review and edit this page or section. Information are subject to change.

This page is a work in progress. Its goals are to help users get their devices up and running while minimizing redundancy with other pages (e.g., Documentation, Development), and to synthesize information provided in existing guides. Sections below represent a rough outline and will need to be expanded with details and further instructions.

Who Can Contribute

Anyone! Generally, the PineNote is in a very early state, and at least an intermediate level of linux knowledge is probably necessary to be able to do anything at this moment. That said, there are multiple efforts happening at once, and there are a number of ways a person of any skill level can help:

  1. Join in the ongoing documentation effort
  2. Help mainline the kernel by testing, fixing bugs.

Out of the Box

Information on software shipped with the Pinenote

As of July 2022, the Pinenote ships with a modified version of android. Under this OS, users interested only in reading ebooks and possibly leaking data to unknown parties may find the device more than satisfactory (read: use caution when handling ultra personal or sensitive data). All hardware items are functional with this OS, though the ability to tune and tweak may be limited by the proprietary nature of some drivers (e.g., the driver for the e-ink display). Ongoing support for this OS is absent, though further community development is possible and hoped for by more than a few users already.

Apps preloaded with this OS include:

  • Xphoto
  • WPS Office Lite
  • Browser from Tencent (would urge users to replace/remove)
  • Core: Notes (stylus-driven note app), Local Storage (file browser), Task List (notes list with text and handwriting input)
  • Application Management
  • More Settings

Additional apps may be added via the included browser; for example, F-droid can be installed and then used to install further android apps.

The main bar drawn along the screen's top edge features buttons for accessing the following, from left-to-right:

  • Home (house icon; opens additional bar along the screen's left edge for accessing notes and file management apps)
  • Refresh screen
  • Installed Apps (four squares)
  • Active Apps (bulleted list of three lines)
  • Settings (gear icon)
  • Back
  • Wifi Menu
  • Bluetooth Stylus Menu (pairing included stylus allows use of hardware buttons on the stylus)

When hidden by an open app, this bar can be made to reappear by swiping downward anywhere along the screen's top edge.

Accessories included in the box

As of July 2022, the Pinenote ships with the following items in the box:

  • Pinenote (duh)
  • Stylus
  • USB-c to USB-a cable
  • USB-c to micro-b cable (for stylus)
  • UART dongle

"Table of Contents" for Linux Installation Pages

Building Kernel

PineNote Development/Building Kernel

Booting Linux

PineNote Development/Booting Linux

Additional useful references:

OS Installation

See PineNote Software Releases

Configuring OS and Apps

PineNote Development/Apps

Links to dotfiles, configuration examples, etc.

Retrieved from "https://wiki.pine64.org/index.php?title=PineNote:_Getting_Started&oldid=17949"