Difference between revisions of "PineCube"

Jump to navigation Jump to search
654 bytes added ,  15:14, 20 December 2020
Add instructions for using screen to communicate with the PineCube with the woodpecker usb serial device
(Add instructions for using screen to communicate with the PineCube with the woodpecker usb serial device)
Line 144: Line 144:
Although not officially supported ([https://www.armbian.com/download/?device_support=No+official+support+(CSC) CSC Status] it enables the usage of Debian and Ubuntu.
Although not officially supported ([https://www.armbian.com/download/?device_support=No+official+support+(CSC) CSC Status] it enables the usage of Debian and Ubuntu.


A serial console can be established with 1520008N1 (no hardware flow control). Login credentials are as usual in Armbian root 1234.  
A serial console can be established with 152008N1 (no hardware flow control). Login credentials are as usual in Armbian login: root password: 1234.
 
==== Example with screen and the woodpecker USB serial device ====
 
First connect the woodpecker USB serial device to the PineCube. Pin 1 on the PineCube has a small white dot on the PCB - this should be directly next to the microusb power connection. Attach the GND pin on the woodpecker to pin 6 (GND) on the PineCube, TXD from the woodpecker to pin 10 (UART_RXD) on the PineCube, and RXD from the woodpecker to pin 8 (UART_TXD) on the PineCube.
 
On the host system which has the woodpecker USB serial device attached, it is possible to run screen and to communicate directly with the PineCube:
 
<code>screen /dev/ttyUSB0 115200</code>


=== Stock Linux ===
=== Stock Linux ===
27

edits

Navigation menu