Changes

Jump to navigation Jump to search
Added additional picture
[[Image:Qee3ovj.jpg|500px|Image: 500 pixels]]
[[Image:Qsud2Gt.jpg|500px|Image: 500 pixels]]
[[Image:Martijnpocket.jpg|500px|Image: 420 pixels]]
= Project Don't be evil, Baseboard and SOPine Module Information, and Schematics =
* Input Power: DC 5V @ 2A, 3.7V Li-Ion battery connector, USB type-C connector
* Baseboard Schematic:
** [httphttps://files.pine64.org/doc/PinePhone/Pinephone-devkit%20Board%20Structure.pdf "Don't Be Evil" PinePhone Dev kit Baseboard Structure]** [https://files.pine64.org/doc/PinePhone/Pinephone-devkit-SCH%20Ver%201.1.pdf "Don't Be Evil" PinePhone Dev kit Baseboard Ver 1.1 Schematic]** [httphttps://files.pine64.org/doc/PinePhone/Pinephone%20Dev%20Kit%20Ver%201.1_PCB.pdf "Don't Be Evil" PinePhone Dev kit Baseboard Ver 1.1 PCB Artwork]** [https://files.pine64.org/doc/PinePhone/Pinephone-devkit-SCH%20Ver%201.2.pdf "Don't Be Evil" PinePhone Dev kit Baseboard Ver 1.2 Schematic]** [https://files.pine64.org/doc/PinePhone/Pinephone%20Dev%20Board20Kit%20Ver%20Structure201.2_PCB.pdf "Don't Be Evil" PinePhone Dev kit Baseboard StructureVer 1.2 PCB Artwork]
* SOPine Module Schematic:
** [httphttps://files.pine64.org/doc/SOPINE-A64/SOPINE-A64-Schematic-ver-0.9.pdf SOPine Module Schematic]** [httphttps://files.pine64.org/doc/SOPINE-A64/SOPINE-A64-Pin-Assignments-ver-1.0.pdf SOPine Module Pin Assignment ver 1.0]
* Wifi/BT module information:
** [httphttps://files.pine64.org/doc/Pine%20A64%20Schematic/A64-DB-WIFI-BT-REV%20B.pdf PINE A64 Wifi/BT Module Schematic]* [httphttps://files.pine64.org/doc/Pine%20A64%20Schematic/Pine%20A64%20Pin%20Assignment%20160119.pdf PINE A64 Pi-2/Eular/Ext Bus/Wifi Bus Connector Pin Assignment (Updated 15/Feb/2016)]
== CPU Architecture ==
* [httphttps://www.arm.com/products/processors/cortex-a/cortex-a53-processor.php Quad-core ARM Cortex-A53 Processor@1152Mhz]
* A power-efficient ARM v8 architecture
* 64 and 32bit execution states for scalable high performance
== GPU Architecture ==
* [httphttps://www.arm.com/products/multimedia/mali-gpu/ultra-low-power/mali-400.php ARM Mali400MP2 Dual-core GPU]
* Support OpenGL ES 2.0 and OpenVG 1.1 standard
* Allwinner A64/R18 SoC information:
** '''R18 and A64 are identical SoC but R18 committed for 10 years supply by vendor.'''
** [httphttps://files.pine64.org/doc/datasheet/pine64/A64%20brief%20v1.0%2020150323.pdf Allwinner A64 SoC Brief Introduction]** [httphttps://files.pine64.org/doc/datasheet/pine64/Allwinner-R18-Brief%20Sheet.pdf Allwinner R18 SoC Brief Introduction]** [httphttps://files.pine64.org/doc/datasheet/pine64/A64_Datasheet_V1.1.pdf Allwinner A64/R18 SoC Data Sheet V1.1 (Official Released Version)]** [httphttps://files.pine64.org/doc/datasheet/pine64/Allwinner_A64_User_Manual_V1.0.pdf Allwinner A64/R18 SoC User Manual V1.0 (Official Release Version)]
* X-Powers AXP803 PMU (Power Management Unit) information:
** [httphttps://files.pine64.org/doc/datasheet/pine64/AXP803_Datasheet_V1.0.pdf AXP803 PMIC Datasheet]
* LPDDR3 information:
** [httphttps://files.pine64.org/doc/datasheet/pine64/AWL3A1632_mobile_lpddr3_1600Mbps.pdf Allwinner LPDDR3 Datasheet]** [httphttps://files.pine64.org/doc/datasheet/pine64/FORESEE%20178ball%2012x11.5%20LPDDR3%2016G%20Spec%20V1.0-1228.pdf Foresee LPDDR3 Datasheet]** [httphttps://files.pine64.org/doc/datasheet/pine64/K4E6E304EE-EGCE.pdf Samsung LPDDR3 Datasheet]** [httphttps://files.pine64.org/doc/datasheet/pine64/LPDDR3%20178ball%208Gb_H9CCNNN8JTALAR_Rev1.0.pdf Hynix LPDDR3 Datasheet]
* eMMC information:
** [httphttps://files.pine64.org/doc/rock64/PINE64_eMMC_Module_20170719.pdf PINE64 eMMC module schematic]** [httphttps://files.pine64.org/doc/rock64/usb%20emmc%20module%20adapter%20v2.pdf PINE64 USB adapter for eMMC module V2 schematic]** [httphttps://files.pine64.org/doc/rock64/USB%20adapter%20for%20eMMC%20module%20PCB.tar PINE64 USB adapter for eMMC module PCB in JPEG]** [httphttps://files.pine64.org/doc/datasheet/pine64/SDINADF4-16-128GB-H%20data%20sheet%20v1.13.pdf SanDisk eMMC Datasheet]** [httphttps://files.pine64.org/doc/datasheet/pine64/H26M64003DQR%20Datasheet.pdf Hynix eMMC Datasheet]** [httphttps://files.pine64.org/doc/datasheet/pine64/FORESEE_eMMC_NCEMBSF9-xxG%20SPEC%20A0%2020150730.pdf Foresee eMMC Datasheet]
* SPI NOR Flash information:
** [httphttps://files.pine64.org/doc/datasheet/pine64/w25q128jv%20spi%20revc%2011162016.pdf WinBond 128Mb SPI Flash Datasheet]** [httphttps://files.pine64.org/doc/datasheet/pine64/GD25Q128C-Rev2.5.pdf GigaDevice 128Mb SPI Flash Datasheet]
* '''Project Don't be evil module/component related information:'''
** 2MPixel front CMOS Camera module information:
*** [httphttps://files.pine64.org/doc/datasheet/pinephone/GC20355Mp-module_for_pinephone_devkit.pdf 2MP CMOS Image Sensor Module Drawing]*** [httphttps://files.pine64.org/doc/datasheet/pinephone/GC2035%20Product%20Brief.pdf GalaxyCore GC2035 2MP CMOS Image Sensor Product Brief]*** [httphttps://files.pine64.org/doc/datasheet/pinephone/GC2035%20DataSheet.pdf GalaxyCore GC2035 2MP CMOS Image Sensor Datasheet]
** 5MPixel Rear CMOS Camera module information:
*** [httphttps://files.pine64.org/doc/datasheet/pinephone/ATK-OV5640-5Mp-module_for_pinephone_devkit.pdf 5MP CMOS Image Sensor Module Drawing]*** [httphttps://files.pine64.org/doc/datasheet/pinephone/OV5640_datasheet.pdf OmniVision OV5460 OV5640 5MP CMOS Image Sensor Datasheet]*** [https://www.arducam.com/downloads/modules/OV5640/OV5640_Software_app_note_parallel.pdf OmniVision OV5640 5MP CMOS Image Sensor Software Application Note]
** LCD Touch Screen Panel information:
*** [httphttps://files.pine64.org/doc/datasheet/pinephone/XBD572-IPS-HI010A%20SPEC.pdf 5.7" 1440x720 IPS LCD Panel Specification]*** [httphttps://files.pine64.org/doc/datasheet/pinephone/JD9365D_DS_Preliminary_V0.01_20170427.pdf fiti JD9365D LCD Controller Datasheet]*** [httphttps://files.pine64.org/doc/datasheet/pinephone/XBD572-IPS-HI010A%20SPEC.pdf 5.7" Front Panel Touch Screen Specification]*** [httphttps://files.pine64.org/doc/datasheet/pinephone/FT6336GU_Upgrade_Spec_Ver1.0.pdf FocalTech FT6336GU Front Panel Touch Screen Specification]
** Lithium Battery information:
*** [httphttps://files.pine64.org/doc/datasheet/pinephone/ncr18650b.pdf Panasonic NCR18650B 3350mAH Lithium Ion Battery Specification]
** Ethernet PHY information:
*** [httphttps://files.pine64.org/doc/datasheet/pine64/rtl8211e(g)-vb(vl)-cg_datasheet_1.6.pdf Realtek RTL8211 10/100/1000M Ethernet Transceiver]
** Wifi/BT module information:
*** [httphttps://files.pine64.org/doc/datasheet/pine64/RTL8723BS.pdf Realtek RTL8723BS WiFi with BT SDIO]
** LTE module information:
*** [httphttps://files.pine64.org/doc/datasheet/project_anakin/LTE_module/Quectel_EC25_LTE_Specification_V1.4.pdf Quectel EC25 LTE Module Specification]*** [httphttps://files.pine64.org/doc/datasheet/project_anakin/LTE_module/Quectel_EG25-G_LTE_Specification_V1.1_Preliminary_20180522%20(002).pdf Quectel EG25-G LTE Module Specification]*** [httphttps://files.pine64.org/doc/datasheet/project_anakin/LTE_module/Quectel_EC25&EC21_QuecCell_AT_Commands_Manual_V1.1.pdf Quectel EC25 LTE Module AT Cammands Set Manual]*** [httphttps://files.pine64.org/doc/datasheet/project_anakin/LTE_module/Quectel_EC25_Hardware_Design_V1.3.pdf Quectel EC25 LTE Module Hardware Design Guide]*** [httphttps://files.pine64.org/doc/datasheet/project_anakin/LTE_module/Quectel_EC25_Reference_Design_Rev.D_20161111.pdf Quectel EC25 LTE Module Reference Design Guide]
** Sensors:
*** [https://www.st.com/en/mems-and-sensors/lis3mdl.html ST LIS3MDL 3-axis Magnetomater Datasheet]
*** [https://www.invensense.com/products/motion-tracking/6-axis/mpu-6050/ InvenSense MPU-6050 Six-Axis (Gyro + Accelerometer) MEMS Datasheet]
*** [httphttps://www.sensortek.com.tw/en/product/Proximity_Sensor_with_ALS.html SensorTek STK3335 Ambient Light Sensor and Proximity Sensor]
httphttps://files.pine64.org/sw/pine64_installer/json/postmarketos.png == Postmarket OS Early Alpha test build [microSD Boot] ==* Suitable for PinePhone "Don't Be Evil" Dev Kit version 1.1 and version 1.2* There are two type of LCD panels. For long touch screen cable, please use the build with inverted wording.* DD image (for 8GB micoSD card and above)** [https://images.postmarketos.org/pinephone/ Direct download from postmarketOS image site]** [https://wiki.postmarketos.org/wiki/Pine_Don%27t_be_evil_devkit_(pine-dontbeevil) postmarketOS PinePhone "Don't Be Evil" dev kit wiki site]  https://files.pine64.org/sw/pine64_installer/json/ubports.png
== UBPorts mainline build ==
* [https://ci.ubports.com/job/rootfs-pinephone/ UBPorts Jerkins Jenkins for PinPhonePinePhone]
The link above seems to be broken, if so try this:
[https://ci.ubports.com/job/rootfs/job/rootfs-pinephone/ Jenkins Project rootfs-pinephone]
httphttps://files.pine64.org/sw/pine64_installer/json/plasma_mobile.png
== KDE Plasma Mobile build ==
https://files.pine64.org/sw/pine64_installer/json/sailfishos.png
http== Sailfish OS build == The Sailfish OS image is build on Gitlab CI, the latest image can be installed using our [https://filesraw.pine64githubusercontent.orgcom/swsailfish-on-dontbeevil/pine64_installerflash-it/jsonmaster/postmarketosflash-it.sh flashing script] written in Bash. The script downloads the image and bootloader from our CI, extracts everything and burns it onto the SD card.png
== Postmarket OS build =='''Instructions:'''* Not Yet Ready *1. Download the flashing script 2. Insert a microSD card in your device
3. Make the script executable: <code>chmod +x flash-it.sh</code>
http4. Execute it:<code>.//files.pine64flash-it.org/sw/pine64_installer/jsonsh</sailfishos.pngcode>
== Sailfish OS build ==* Not Yet Ready *5. Follow the instructions. Some commands in the script require root permissions (for example: mounting and flashing the SD card).
'''Note''': The script will format and flash the SD card, make sure that you don't have any important data on the SD card!
http://files.pine64.org/sw/pine64_installer/json/maemo_leste.png
== Maemo OS build ==* Not Yet Ready *https://files.pine64.org/sw/pine64_installer/json/maemo_leste.png
== Maemo Leste build ==
* Works on dev kit versions 1.1 and 1.2
* DD image to a micro SD (8GB+) or eMMC
** [https://maedevu.maemo.org/images/pinephone-dontbeevil/ Maemo Leste test builds download]
httphttps://files.pine64.org/sw/pine64_installer/json/nixos.png
== NixOS build ==
* Not Yet Ready *
 
https://files.pine64.org/sw/pine64_installer/json/luneos.jpg
 
== LuneOS build ==
* [https://build.webos-ports.org/luneos-testing/images/pinephone/ LuneOS test image for PinePhone and thanks to Tofe]
* Tofe recommends using bmaptool ; for example "bmaptool copy https://build.webos-ports.org/luneos-testing/images/pinephone/luneos-dev-image-pinephone-testing-0-15.rootfs.wic.gz /dev/mmcblk0"
 
 
https://files.pine64.org/sw/pine64_installer/json/nemo_mobile.png
 
== Nemo Mobile build ==
* Not Yet Ready *
= Mali-400 64-bit Driver =
= Errata for ver1.1 and ver1.2 board '''1. Please DON'T insert micro SIM card to dev kit board micro SIM card slot, the SIM data, VPP, and GND signal have been misplaced. A miciPCIe adapter with sim card holder 9shown as below photo) will be provide to developers to correct this mistake.''' [[File:MiniPCIe_with_sim_slot_adapter.png]]  '''2. The PinePhone dev kit doesn't charge due to VBUS on SOPine module is not connected. Please connect R9688 solder pads with 0 ohm resistor or using thin wire bridge up the solder pads. Location shows as below:''' [[File:PinePhone_VBUS_charging_small.png]] 
'''3. The SOPINE's SPI NOR flash storage and the devkit's camera flash (heh) share the same GPIO pins. The flash storage may not be used.'''
[[File:SOPINE-SPI-Flash.png]] [[File:Pinephone-1.1-flash-schematic.png]]
 
 
'''4. On the camera flash GPIO conflict, the new assignment of GPIO PB3 pin for SGM3140 FLASH_EN and GPIP PD7 for FLASH_TRIGOUT. Please note that PD7 is also LCD_ID pin which may not be used.'''
 
[[File:GPIO_PB3_location.jpg]]
GPIO PB3 location
 
[[File:U54_SGM3140_FLASH_EN pin location.jpg]]
U54 SGM3140 FLASH_EN pin location
 
[[File:Flash_GPIO_Reassigned.jpg]]
Flash GPIOs Reassigned wiring
 
= Other Resources =
* [httphttps://linux-sunxi.org/Pine64#Manufacturer_images Linux Sunxi Wiki page on PINE A64]
* [https://github.com/apritzel/pine64 Linux Image created by Andre Przywara]
* [https://github.com/longsleep/build-pine64-image PINE64 Linux build scripts, tools and instructions by Longsleep]
* [https://www.stdin.xyz/downloads/people/longsleep/pine64-images/ PINE64 Linux image by Longsleep]
* [httphttps://softwarebakery.com/shrinking-images-on-linux Shrinking images on Linux by FrozenCow]
* [https://osmocom.org/projects/quectel-modems/wiki/EC25/24 Quectel EC-25 LTE module open source information]
 
[[Category:PinePhone]] [[Category:Allwinner A64]]

Navigation menu