Difference between revisions of "NASCase"

Jump to navigation Jump to search
No change in size ,  07:49, 1 September 2018
m
Line 95: Line 95:
In the see-through bag you will also find a small semi-opaque plastic cylinder. This is the LED light lead and it should be installed from the outside of the case into the hole right over the reset (RST) switch. Simply press it into the hole until it sits tight.  
In the see-through bag you will also find a small semi-opaque plastic cylinder. This is the LED light lead and it should be installed from the outside of the case into the hole right over the reset (RST) switch. Simply press it into the hole until it sits tight.  


If you wish to install an IRx received into your case then you should also place it into the IR socket at this stage. It should align with the cutout right above the power (PWR) switch.
If you wish to install an IRx receiver into your case then you should also place it into the IR socket at this stage. It should align with the cutout right above the power (PWR) switch.


===Step 3 PCIe to SATA adapter and Cabling===
===Step 3 PCIe to SATA adapter and Cabling===
242

edits

Navigation menu