Difference between revisions of "PineNote"

Jump to navigation Jump to search
Line 167: Line 167:
==== USB-C Debug Accesory Mode (DAM)/UART Dongle====
==== USB-C Debug Accesory Mode (DAM)/UART Dongle====
The USB UART dongle delivered with the PineNote allows you to have access to a serial port without having to open up the device. The factory firmware runs at a baud rate of 1500000bps, 8 data bits 1 stop bit, no parity and no flow control. The USB-C male end should go into the PineNote and the female end can be connected with a standard USB-C cable to your computer.
The USB UART dongle delivered with the PineNote allows you to have access to a serial port without having to open up the device. The factory firmware runs at a baud rate of 1500000bps, 8 data bits 1 stop bit, no parity and no flow control. The USB-C male end should go into the PineNote and the female end can be connected with a standard USB-C cable to your computer.
=== Documentation ===
PineNote development documentation is a little lacking. Unless you are relatively plugged in with the chat, it's difficult to know what is going on. There is an effort to amend that that lives here: [[PineNote/Documentation]].


== BSP Linux SDK ==
== BSP Linux SDK ==
88

edits

Navigation menu