Difference between revisions of "PinePhone Pro"

Jump to navigation Jump to search
→‎Specifications: Add the NOR Flash to the specifications
(lang)
(→‎Specifications: Add the NOR Flash to the specifications)
Tags: Mobile web edit Mobile edit
(128 intermediate revisions by 15 users not shown)
Line 1: Line 1:
[[File:Pinephone_double.png|400px|thumb|right|Rendering of the PinePhone Pro]]
[[File:Pinephone_double.png|400px|thumb|right|Rendering of the PinePhone Pro]]


The '''PinePhone Pro''' is PINE64's flagship smartphone announced in October 2021. It features 4GB of RAM, an 128GB eMMC and is using an Rockchip RK3399S SoC.
The '''PinePhone Pro''' is PINE64's flagship smartphone announced on October 15, 2021. It features 4GB of RAM, an 128GB eMMC and is using an Rockchip RK3399S SoC, which is a specialized version of the RK3399 made specifically for the PinePhone Pro.


== Introduction ==
== Introduction ==
The PinePhone Pro is PINE64’s second smartphone and a successor to the original PinePhone. It does not, however, replace the original PinePhone. It should also not be considered a second generation PinePhone; it is a higher-end device, with much better specs, aimed at those who wish to daily-drive a open system stack. Achieving this goal will, however, take time as the software and overall smartphone software ecosystem needs to mature.
More information about the PinePhone Pro can be found on the device [https://www.pine64.org/pinephonepro/ main page].
=== State of the software ===
<sup>([[PinePhone Pro Software State|view separately]])</sup>
{{:PinePhone Pro Software State}}
=== Editions and revisions ===
Similarly to the original PinePhone, various PinePhone Pro editions are planned, the first of which is the Developer Edition (aimed at developers, as the name entails) followed by the Explorer Edition, which is aimed at early adopters.
* [[PinePhone Pro Developer Edition]]
* [[PinePhone Pro Explorer Edition]]
=== Help and support ===
Still have any questions regarding software, shipping, or ordering after reading this Wiki? Please don't hesitate to contact the community in the bridged community channels for detailed answers or simply to chat with friendly people in the community! See [[Main Page#Community and Support]].
Please keep in mind that PINE64 is not like a regular company (see the [https://www.pine64.org/philosophy/ PINE64 philosophy]) and that support resources are limited - the best way to get support quickly is to ask in the community chat! Please only contact the PINE64 support directly if questions couldn't be solved via the community chat or this wiki.
== First time setup ==
[[File:Pinephone_warning.png|320px|thumb|right|A protection foil isolates the battery for the shipping.]]
When shipped the battery is isolated from the device using a protective plastic tab, which is required to be removed before using the phone. The battery '''will not''' charge or boot until it is removed and the battery is connected again.
{{Info|To remove the sticker after unboxing the phone: Carefully remove the back panel using the notch in the corner of the back cover without overbending it. Then remove the battery. Peel off the clear plastic sticker below it, which isolates the charging contacts and reinsert the battery.}}
The PinePhone's SIM slot only accepts a micro-SIM, please do not insert a nano-SIM without an adapter and make sure that the nano-SIM does not get released from its adapter. The SIM card has to be placed in the lower slot, while the microSD has to be placed in the upper slot.
{{Info|Do not insert an empty micro-SIM adapter into the phone and do not release the nano-SIM inside the adapter, as it will get stuck on the contact pins. If the nano-SIM got released inside the adapter inside the phone, carefully reinsert the nano-SIM card without moving the adapter. In that case do not pull on the empty adapter as it will get stuck on the contact pins and damage them!}}
[[File:Pinephone slots.png|600px|thumb|none|The microSD belongs in the upper slot, the micro-SIM in the lower slot.]]
An adapter from a nano to a micro-SIM might be included under tape in the camera notch of the phone's packaging. Some nano-SIMs will not fit firmly into that adapter that comes with the PinePhone and if the included adapter is used without a well-fitting nano-SIM, the contact pins might get damaged. In that case it is highly recommended to acquire a better fitting adapter.
== Software ==
The software section explains how to install the available software releases for the PinePhone Pro to the internal eMMC or a microSD card, how to boot them and how to solve common booting issues.
=== Software releases ===
The [[PinePhone Pro Software Releases]] page has a complete list of currently supported phone-optimized operating system images that work with the PinePhone Pro.
{{Info|Images of the regular PinePhone are not compatible with the PinePhone Pro.}}
=== Boot order ===
The RK3399S processor in the PinePhone Pro searches for the bootloader (such as ''U-Boot'') in the following order:
# SPI flash
# eMMC (the internal memory)
# MicroSD card
The bootloader uses its own boot order for loading the kernel and other core operating system components at boot, which for example may result in the boot loader residing on the eMMC loading and booting the kernel from a microSD card.
The SPI flash and the eMMC chip can be bypassed during boot by temporarily disabling them at the hardware level using the following method, which can be used in cases such as having corrupted installation on the SPI flash or the eMMC:
* On the '''Explorer Edition''' hold the ''RE'' button underneath the cover for a few seconds, while powering on the device.
* On the '''Developer Edition''', which was an earlier revision intended for developers only, the SPI and the eMMC can be bypassed by shorting the bypass test points while booting. The process is explained in the article [[PinePhone Pro Developer Edition#Nuking the factory AOSP installation|PinePhone Pro Developer Edition]]. Please join the community chat for any questions regarding the process.
The bypass disables the SPI and the eMMC while being applied and the PinePhone Pro will try to boot from the next available boot medium, which is the microSD card. Note: When holding the ''RE'' button (or when shorting the contact points in case of the ''Developer Edition'') for a longer time at boot the operating system will not initialize the SPI and eMMC and it will not be possible to write to these storage mediums until the next reboot.
{{Info|The bootloader (such as ''U-Boot'') resides in the free space in front of the first partition. Wiping the bootloader from the eMMC to make the PinePhone Pro boot from microSD card can be done using <code>sudo dd if&#61;/dev/zero of&#61;/dev/mmcblk2 seek&#61;64 count&#61;400 conv&#61;fsync</code>. Formatting the drive or deleting the partition table is not sufficient to wipe the bootloader.}}
See [[RK3399 boot sequence]] for details regarding the boot sequence.
=== Installation instructions ===
The software releases can be installed (the process is being referred to as ''flashing'') to the eMMC or to an microSD card.
==== Flashing to microSD card ====
To install an image to the microSD card:
# Download a compatible image from [[PinePhone Pro Software Releases]]
# Extract the compressed image
# Write the image to your microSD card using your favorite method, examples:
#* Using ''dd'': On the device you're flashing the microSD card from, find the correct device under <code>lsblk</code> and then flash the image to the microSD card using <code>sudo dd if='''IMAGE.img''' of=/dev/'''[DEVICE]''' bs=1M status=progress conv=fsync</code>. Make sure the target is the whole microSD card and not its first partition (''sdc1'' or ''mmcblk0p1'' are wrong!).
#* Using ''bmaptool'': Make sure to select the correct device using <code>lsblk</code>. Then run bmaptool with the correct device: Download the ''IMAGE.xz'' and the ''IMAGE.bmap'' files, then run <code>bmaptool copy --bmap '''IMAGE.bmap''' '''IMAGE.xz''' /dev/'''[DEVICE]'''</code>. This takes around 2.5 minutes to flash a 4 GB file.
#* Using ''a graphical tool'': A graphical tool such as Gnome Disks under Linux or Etcher under Windows may also be used.
# Insert the microSD card into the top slot of the PinePhone Pro. Make sure the microSD card is inserted all the way and that the notch of the right side of the microSD card is not visible anymore, see [[:File:Pinephone_slots.png|here]].
# Power on the PinePhone Pro. If there is an '''existing bootloader on the eMMC''' already you need to bypass or wipe the bootloader on the eMMC as explained in the section [[PinePhone Pro#Boot order|Boot order]].
==== Flashing to the eMMC ====
Flashing to the eMMC can be done by booting an operating system from the microSD (see the section [[PinePhone Pro#Flashing to microSD card|Flashing to microSD card]]) and by writing to the eMMC directly from there:
# Boot an operating system [[PinePhone Pro#Flashing to microSD card|from the microSD card]]. If there is already a bootloader on the eMMC installed see the section [[PinePhone Pro#Boot order|Boot order]] to bypass it
# Download or copy the desired image to the microSD card as file
# Check if the eMMC appears under <code>lsblk</code>. If it doesn't appear in the output of the command, the eMMC wasn't initialized due to applying the above explained bypass method for a too long time during the boot
# Extract the image
# Flash the extracted image using <code>sudo dd if='''IMAGE.img''' of=/dev/mmcblk2 bs=1M status=progress conv=fsync</code>
# Reboot the PinePhone Pro
=== Troubleshooting ===
If the PinePhone Pro is not booting (either booting incompletely into a boot splash or tty or if the PinePhone Pro is showing no signs of life) this will typically have the following two reasons:
==== The battery is fully drained ====
The bootloader ''U-Boot'' is currently booting into a boot loop if the battery is fully drained. In that case it is not possible to charge the phone. The battery can be charged by interrupting the boot loop by booting the PinePhone Pro into ''Maskrom mode'' or by charging the battery externally. To boot the PinePhone Pro into ''Maskrom mode'':
* Remove any microSD card from the phone and keep it removed for the below procedure
* Remove the battery, any USB cable and any serial cable
* Reinsert the battery
* Hold the ''RE'' button underneath the back cover of your ''Explorer Edition'' (or short the bypass contact points on the ''Developer Edition'')
* Connect the phone to an USB port of a computer, while still holding the button for some time
* Check if the phone in Maskrom mode appears in the output of the terminal command <code>lsusb</code> on the computer, the expected ''VID:PID'' of the device is ''2207:330c'' (under ''Windows'' this can be checked using the ''Device Manager'' and checking the VID and PID of an appearing ''Unknown device'')
* Let the phone charge for at least two hours
{{Info|If the device doesn't appear under ''lsusb'' please try again with a different known good USB-C cable and make sure that there is no microSD card in the phone inserted.}}
The device should now be able to boot from the boot medium again. If that is not the case the installation got corrupted, as explained below.
==== The installation is corrupted ====
The PinePhone Pro won't be able to boot if the installation on the SPI flash, the eMMC or the microSD card got corrupted. To boot a working operating system:
* Prepare a microSD card as explained in the section [[PinePhone Pro#Flashing to microSD card|Flashing to microSD card]]
* Remove any USB-C cable or device or add-on case from the PinePhone Pro
* Make sure the device is powered off by shortly removing the battery for a second
* Insert the microSD card into the top slot of the PinePhone Pro. Make sure the microSD card is inserted all the way and that the notch of the right side of the microSD card is not visible anymore.
* Power on the device while bypassing the SPI and eMMC as explained under [[PinePhone Pro#Boot order|Boot order]]
The device should now boot from the microSD card. If the phone does not boot from the microSD card the microSD card was flashed with an incompatible image or the battery got drained as explained above.
=== Bootloaders ===
The following section contains notes regarding compatible bootloaders with the PinePhone Pro.
==== U-Boot ====
The pre-installed operating system on the PinePhone Pro Explorer Edition is using ''U-Boot'' as default bootloader.
==== Tow-Boot ====
There are plans to possibly ship the PinePhone Pro with ''Tow-Boot'' pre-installed to the SPI flash in a future batch, which is an opinionated distribution of ''U-Boot'' and brings numerous advantages over stock ''U-Boot'', such as the possibility to choose from booting the eMMC or microSD card using the volume buttons during boot, as well as a ''USB Mass Storage mode'', where the device can be written to by connecting the device to a computer via USB.
The user can flash Tow-Boot to the PinePhone Pro using the [https://tow-boot.org/devices/pine64-pinephonePro.html instructions on the Tow-Boot website].
==== levinboot ====
The levinboot bootloader is another upcoming option for the PinePhone Pro. The project repository can be found [https://gitlab.com/DeltaGem/levinboot/-/tree/master/ here].
== Privacy switch configuration ==
[[File:PinePhone Kill Interruptors de Maquinari del PinePhone 4529.jpg|320px|thumb|right|Picture of the privacy switches]]
The PinePhone features six switches that can be used to configure its hardware. They are numbered 1-6, with switch 1 located nearest to the modem. Their "on" position is toward the top of the phone.
{| class="wikitable"
|-
! Number
! Name
! Description
|-
| 1
| Modem
| "On" enables 2G/3G/4G communication and GNSS hardware, "off" disables it.
|-
| 2
| WiFi / Bluetooth
| "On" enables WiFi and Bluetooth communication hardware, "off" disables it.
|-
| 3
| Microphone
| "On" enables audio input from on-board microphones (not 3.5 mm jack), "off" disables it.
|-
| 4
| Rear camera
| "On" enables the rear camera, "off" disables it.
|-
| 5
| Front camera
| "On" enables the front camera, "off" disables it.
|-
| 6
| Headphone
| "On" enables audio input and output via the 3.5 mm audio jack, "off" switches the jack to hardware UART¹ mode.
|}
¹ Note: The baud rate may be 1500000 instead of 115200.


== Specifications ==
== Specifications ==


* '''Dimensions:''' 160.8 x 76.6 x 11.1mm
* '''Dimensions:''' 160.8 x 76.6 x 11.1mm
* '''Weight:''' Approx. 215g
* '''Weight:''' Approx. 220g
* '''SIM Card:''' ?Micro-SIM?
* '''SIM Card:''' Micro-SIM
* '''Display:'''
* '''Display:'''
** '''Size:''' 6 inches (151mm) diagonal
** '''Size:''' 6 inches (151mm) diagonal
** '''Type:''' 1440 x 720 in-cell IPS with Gorilla Glass 4™  
** '''Type:''' 1440 x 720 in-cell IPS with Gorilla Glass 4™
** '''Resolution:''' 1440x720, 18:9 ratio
** '''Resolution:''' 1440x720, 18:9 ratio
* '''System on Chip:''' Rockchip RK3399S 64bit SoC – 2x A72 and 4x A53 CPU cores @ 1.5GHz
* '''System on Chip:''' Rockchip RK3399S 64bit SoC – 2x A72 and 4x A53 CPU cores @ 1.5GHz
* '''RAM:''' 4GB LPDDR4 @ 800MHz
* '''RAM:''' 4GB LPDDR4 @ 800MHz
* '''Internal Storage:''' 128GB eMMC, extendable up to 2TB via microSD, supports SDHC and SDXC
* '''Internal Storage:''' 128GB eMMC, extendable up to 2TB via microSD, supports SDHC and SDXC
* '''Back [[#Camera|Camera]]:''' 13MP Sony IMX258 with Gorilla Glass 4™ protective layer, LED Flash
* '''NOR Flash:''' Listed as [GigaDevices] GD25LQ128EWIGR, but physical inspection found a SiliconKaiser SK25LP128.
* '''Front Camera:''' 5MP OmniVision OV5640 front-facing camera
* '''Back [[#Camera|Camera]]:''' 13MP Sony IMX258 with Gorilla Glass 4™ protective layer, LED Flash
* '''Front Camera:''' 8MP, OmniVision OV8858 front-facing camera
* '''Sound:''' Loudspeaker, 3.5mm jack & mic (jack doubles as hardware UART if hardware switch 6 is deactivated)
* '''Sound:''' Loudspeaker, 3.5mm jack & mic (jack doubles as hardware UART if hardware switch 6 is deactivated)
* '''Communication:'''
* '''Communication:'''
Line 26: Line 204:
** '''WCDMA''': B1, B2, B4, B5, B6, B8, B19
** '''WCDMA''': B1, B2, B4, B5, B6, B8, B19
** '''GSM''': B2, B3, B5, B8 (850, 900, 1800, 1900 MHz)
** '''GSM''': B2, B3, B5, B8 (850, 900, 1800, 1900 MHz)
** '''WLAN & Bluetooth:''' AMPAK AP6255 WiFi 11ac + Bluetooth V4.1
** '''WLAN & Bluetooth:''' Wi-Fi 802.11AC, hotspot capable + Bluetooth V5.0
** '''GNSS:''' GPS/GLONASS/BeiDou/Galileo/QZSS, with A-GPS
** '''GNSS:''' GPS/GLONASS/BeiDou/Galileo/QZSS, with A-GPS
* '''Sensors:''' Accelerometer, gyroscope, proximity, ambient light, compass
* '''Sensors:''' Accelerometer, gyroscope, proximity, ambient light, compass
Line 35: Line 213:
== Components ==
== Components ==


== Press ==
{| class="wikitable"
! Component
! Model
|-
| Touchscreen
| Goodix GT917S
|-
| LCD
| Himax HX8394 compatible
|-
| Rear camera
| IMX258
|-
| Front camera
| OV8858
|-
| Camera flash
| AW3641EDNR
|-
| WiFi + Bluetooth
| [https://www.azurewave.com/img/wireless-modules/AW_CM256SM_DS_Rev15_CYW.pdf AzureWave AW-CM256SM]
|-
| Modem
| [http://static.abstore.pl/design/accounts/soyter/img/dokumentacje/quectel_eg25-g.pdf Quectel EG25-G]
|-
| GNSS/GPS
| [http://static.abstore.pl/design/accounts/soyter/img/dokumentacje/quectel_eg25-g.pdf Quectel EG25-G]
|-
| 3 Axis Magnetometer
| [https://www.st.com/en/mems-and-sensors/lis3mdl.html ST LIS3MDL]
|-
| Geo Magnetic Sensor
| [http://www.voltafield.com/products01.html Voltafield AF8133J]
|-
| Ambient light / Proximity
| STK3311-A
|-
| Accelerometer / Gyroscope
| [https://invensense.tdk.com/products/motion-tracking/6-axis/mpu-6500/ TDK MPU-6500]
|-
| Vibration motor
|
|-
| Notification LED
| LED0603RGB
|-
| Audio Codec
| ALC5616 and ALC5640
|-
| Volume buttons
| Buttons connected to the KEYADC
|-
| Power button
|
|-
| Battery fuel gauge
| [https://rockchip.fr/RK818%20datasheet%20V1.0.pdf RK818]
|}
 
== Datasheets, schematics and certifications ==
 
* PinePhone Pro mainboard schematic:
** [https://files.pine64.org/doc/PinePhonePro/PinephonePro-Schematic-V1.0-20211127.pdf PinePhone Pro mainboard Explorer Edition Released Schematic ver 1.0 20211127]
** [https://files.pine64.org/doc/PinePhonePro/PinephonePro_PCB_Component_Placement-V02_20211127-top.pdf PinePhone Pro mainboard Explorer Edition component top placement ver 1.0 20211127]
** [https://files.pine64.org/doc/PinePhonePro/PinephonePro_PCB_Component_Placement-V02_20211127-bottom.pdf PinePhone Pro mainboard Explorer Edition component bottom placement ver 1.0 20211127]
 
* PinePhone Pro USB-C small board schematic:
** TBD
 
* Certifications:
** [https://files.pine64.org/doc/cert/PinePhone%20Pro%20FCC%20Certificate-S21101902805001.pdf PinePhone Pro FCC Certificate]
** [https://files.pine64.org/doc/cert/PinePhonePro%20SAR%20Evaluation%20Report-S21101902806001.pdf PinePhone Pro SAR Evaluation Report]
** [https://files.pine64.org/doc/cert/PinePhone%20Pro%20CE%20RED%20Certificate-S21101902802-R1.pdf PinePhone Pro CE RED Certificate]
** [https://files.pine64.org/doc/cert/PinePhonePro%20RoHS%20Test%20Report.pdf PinePhone Pro ROHS Test Report]
 
== Factory Test Build for Hardware Checking ==
 
* Please note that this Android build solely for PinePhone Pro hardware checking purpose and solely used by support team. This is NOT a general release build.
* DD image (for 8GB microSD Card or larger)
** [http://files.pine64.org/os/PinePhonePro/pinephone_pro_dd_android9_QC_Test_SDboot_20220215-8GB.img.gz Direct download from pine64.org]
*** MD5 (GZip file): 214e063c8205c1a98d44b2015a21bb5d
*** File Size: 722MB
 
* Download the build, extract the image and dd it to a 8 GB or larger microSD card, takes out the PinePhone Pro Explorer Edition then insert it into microSD slot (upper slot).
* Insert battery, press RE button (bypass SPI and eMMC boot)  while plug in USB-C power. After 3 seconds release RE button.
* When power up, below battery icon screen show up and press power key for two second, the Rockchip logo screen shows up.
 
[[File:PPP_Abdroid_Test_Utility-1.jpg|300px]][[File:PPP_Abdroid_Test_Utility-2.jpg|300px]]
 
* Wait for home screen, double tap on the test app icon (mark red circuit) and this will bring up the factory test screen. Please note that SD test is disable due to this is a SD boot build.
* After running particular test function, please snapshot test result and pass back to support team
** Note: Please slot in functional Sim card when perform SIM test
** Note: When perform GPS test, the first result may fail and please ignore this false message.
** Note: For light sensing test, please have touch light shine to PinePhone Pro when perform test.
 
[[File:PPP_Abdroid_Test_Utility-4.jpg|300px]][[File:PPP_Abdroid_Test_Utility-5.jpg|538px]]
 
== Using Factory Test Build for Battery charging ==
 
* Please note that this Android build solely for PinePhone Pro hardware checking purpose and solely used by support team. This is NOT a general release build.
* DD image (for 8GB microSD Card or larger)
** [http://files.pine64.org/os/PinePhonePro/pinephone_pro_dd_android9_QC_Test_SDboot_20220215-8GB.img.gz Direct download from pine64.org]
*** MD5 (GZip file): 214e063c8205c1a98d44b2015a21bb5d
*** File Size: 722MB


For an overview about media of the PinePhone you can use for the news, blogs, or similar see [[PinePhone Pro Press]].
* Download the build, extract the image and dd it to a 8 GB or larger microSD card, takes out the PinePhone Pro Explorer Edition then insert it into microSD slot (upper slot).
* Insert battery, press RE button (bypass SPI and eMMC boot)  while plug in USB-C power. After 3 seconds release RE button.
* When power up, below battery icon screen show up and battery will start charging.
* The battery icon display for few seconds and then LCD panel turn off while charging. To check charging status, just quick press power button (about 0.5 second) and battery icon will display progress.


== PinePhone board information, schematics and certifications ==
[[File:PPP_Abdroid_Test_Utility-1.jpg|300px]]


== Datasheets for components and peripherals ==
== Press ==


== Developer works ==
For an overview about media of the PinePhone Pro you can use for the news, blogs, or similar see [[PinePhone Press]].
*[https://xnux.eu/log/#047 Megi]'s blog post about the device


== External links ==
== External links ==
*[https://www.pine64.org/pinephonepro/ Product Page]
* [https://www.pine64.org/pinephonepro/ Product Page]
*[https://www.pine64.org/2021/10/15/october-update-introducing-the-pinephone-pro/ Blog post] with the announcement
* [https://www.youtube.com/watch?v=wP2-6Z74W44 Announcement video]
 
* [https://www.pine64.org/2021/10/15/october-update-introducing-the-pinephone-pro/ Blog post] with the announcement


[[Category:PinePhone]] [[Category:PinePhone Pro]] [[Category:Rockchip RK3399]]
[[Category:PinePhone Pro]][[Category:Rockchip RK3399]]
24

edits

Navigation menu