Difference between revisions of "PinePhone"

Jump to navigation Jump to search
13 bytes added ,  12:21, 29 September 2021
lang
m (→‎PinePhone accessory: Accessories)
(lang)
Line 77: Line 77:
* '''Back [[#Camera|Camera]]:''' Single 5MP, 1/4", LED Flash
* '''Back [[#Camera|Camera]]:''' Single 5MP, 1/4", LED Flash
* '''Front Camera:''' Single 2MP, f/2.8, 1/5"
* '''Front Camera:''' Single 2MP, f/2.8, 1/5"
* '''Sound:''' Loudspeaker, 3.5mm jack & mic (jack doubles as hardware UART if killswitch 6 is deactivated)
* '''Sound:''' Loudspeaker, 3.5mm jack & mic (jack doubles as hardware UART if hardware switch 6 is deactivated)
* '''Communication:'''
* '''Communication:'''
** '''[[#Modem|Modem]]:''' [https://www.quectel.com/product/lte-eg25-g/ Quectel EG25-G]
** '''[[#Modem|Modem]]:''' [https://www.quectel.com/product/lte-eg25-g/ Quectel EG25-G]
Line 88: Line 88:
** '''GNSS:''' GPS/GLONASS/BeiDou/Galileo/QZSS, with A-GPS
** '''GNSS:''' GPS/GLONASS/BeiDou/Galileo/QZSS, with A-GPS
* '''Sensors:''' Accelerometer, gyroscope, proximity, ambient light, compass
* '''Sensors:''' Accelerometer, gyroscope, proximity, ambient light, compass
* '''Killswitches:''' Modem, WiFi & Bluetooth, Microphone, Cameras
* '''Privacy switches:''' Modem, WiFi & Bluetooth, Microphone, Cameras
* '''[[#Battery|Battery]]:''' Lithium-ion, rated capacity 2800mAh (10.64Wh), typical capacity 3000mAh (11.40Wh) (nominally replaceable with any Samsung J7 form-factor battery)
* '''[[#Battery|Battery]]:''' Lithium-ion, rated capacity 2800mAh (10.64Wh), typical capacity 3000mAh (11.40Wh) (nominally replaceable with any Samsung J7 form-factor battery)
* '''I/O:''' USB Type-C, USB Host, DisplayPort Alternate Mode output, 15W 5V 3A Quick Charge, follows USB PD specification
* '''I/O:''' USB Type-C, USB Host, DisplayPort Alternate Mode output, 15W 5V 3A Quick Charge, follows USB PD specification
Line 218: Line 218:
You can buy a serial debug cable from the [https://pine64.com/product/pinebook-pinephone-pinetab-serial-console/ PINE64 Store]. The store cable uses a 4 ring plug, as seen in the [https://files.pine64.org/doc/pinebook/guide/Pinebook_Earphone_Serial_Console_Developer_Guide.pdf here], but a 3 ring plug works just as well. The cable uses a CH340 chipset based serial to USB converter, but any 3.3v serial connection can be used. Because it is a "host"/DTE it means that you need a ''cross modem cable'' ([https://en.wikipedia.org/wiki/Null_modem Null Modem]) with TX on Tip to be connected to RX. A cable like e.g. [https://www.ftdichip.com/Products/Cables/USBTTLSerial.htm FTDI TTL-232R-3V3-AJ] which has TX on Tip and RX on Ring fits perfectly.
You can buy a serial debug cable from the [https://pine64.com/product/pinebook-pinephone-pinetab-serial-console/ PINE64 Store]. The store cable uses a 4 ring plug, as seen in the [https://files.pine64.org/doc/pinebook/guide/Pinebook_Earphone_Serial_Console_Developer_Guide.pdf here], but a 3 ring plug works just as well. The cable uses a CH340 chipset based serial to USB converter, but any 3.3v serial connection can be used. Because it is a "host"/DTE it means that you need a ''cross modem cable'' ([https://en.wikipedia.org/wiki/Null_modem Null Modem]) with TX on Tip to be connected to RX. A cable like e.g. [https://www.ftdichip.com/Products/Cables/USBTTLSerial.htm FTDI TTL-232R-3V3-AJ] which has TX on Tip and RX on Ring fits perfectly.


== Killswitch configuration ==
== Privacy switch configuration ==


[[File:PinePhone Kill Interruptors de Maquinari del PinePhone 4529.jpg|320px|thumb|right|Detail of DIP switch]]
[[File:PinePhone Kill Interruptors de Maquinari del PinePhone 4529.jpg|320px|thumb|right|Detail of DIP switch]]
Moderator
1,459

edits

Navigation menu