Pine A64 openHAB Release

From PINE64
Jump to navigation Jump to search

openHAB Open Source Home Automation Image Release

openHAB 2.0 Image 20170129 based on Ubuntu Linux Base image by Longsleep

  • This image is a headless Ubuntu with pre-installed openHAB 2.0 final.
  • Suitable for 512MB/1GB/2GB Pine A64(+) Board
  • You can flash this in linux using all the regular methods or you can use Win32 Disk Image software or something similar.
  • Login with
    • username: openhab
    • password: changeit
  • Execute sudo /usr/local/sbin/resize_rootfs.sh script to resize the root partition in order to fully utilize the SD Card
  • Includes Zulu Embedded JDK 1.8.0 Update 112
  • openHAB is installed via apt
  • openHAB is started as a system service, you can use systemctl for it:
    • sudo systemctl status openhab2.service
    • sudo systemctl stop openhab2.service
    • sudo systemctl start openhab2.service
  • Initial boot can take a few minutes before http://openhab:8080 becomes available.
  • The ZWave board is preconfigured as a Thing in openHAB - all that needs to be done is to install the Z-Wave binding
  • For getting started with openHAB, please refer to http://docs.openhab.org/
  • DD images: