Wifi Remote I2c

Quick Start Guide

Make sure that the driver for USB/UART Programming/Console Adapter (PMPROG01) is properly install and the PC is detected it as Comm Port.
The USB/UART Bridge is base on Silicon Lab CP2012 chipset.
USB/UART Programming/Console Adapter (PMPROG01) driver can be Download here
Connect the USB/UART Programming/Console Adapter (PMPROG01) to the Wifi Remote I2c Device.

Termite Setup Screen

For windows system, you can use terminal emulator program Termite to configure the device.
Termite can be downloaded at http://www.compuphase.com/software_termite.htm
Make sure the 'Port' setting is refer to the USB/UART Programming/Console Adapter (PMPROG01)'s Comm Port.
Follow the setting accordingly