Difference between revisions of "Wifi Remote I2c"

From PINE64
Jump to navigation Jump to search
Line 1: Line 1:
== Quick Start Guide ==
== Quick Start Guide ==
=== Hardware Setup ===
=== Hardware Setup ===
[[File:PMWF01A_Wifi_Remote_IO_Rev3-1.jpg|100px|frame]]
[[File:PMWF01A_Wifi_Remote_IO_Rev3-1.jpg|frame|thumb]]
* Make sure that the driver for USB/UART Programming/Console Adapter (PMPROG01) is properly install and the PC is detected it as Comm Port.
* Make sure that the driver for USB/UART Programming/Console Adapter (PMPROG01) is properly install and the PC is detected it as Comm Port.
* USB/UART Programming/Console Adapter (PMPROG01) driver can be [https://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx Download here]
* USB/UART Programming/Console Adapter (PMPROG01) driver can be [https://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx Download here]

Revision as of 03:33, 14 May 2016

Quick Start Guide

Hardware Setup

thumb
  • Make sure that the driver for USB/UART Programming/Console Adapter (PMPROG01) is properly install and the PC is detected it as Comm Port.
  • USB/UART Programming/Console Adapter (PMPROG01) driver can be Download here
  • Connect the USB/UART Programming/Console Adapter (PMPROG01) to the Wifi Remote I2c Device.

Network Layout

File:Wifi remote i2c topology.png

Download