Difference between revisions of "User:Pineadmin/OpenMediaVault"

From PINE64
Jump to navigation Jump to search
m (Fxc moved page OpenMediaVault to User:Pineadmin/OpenMediaVault: stub and outdated)
 
(2 intermediate revisions by one other user not shown)
Line 1: Line 1:
Please go through the [http://files.syabas.com/popcornhour/download/PopcornHourTransformerNAS_UserManual-20180122.pdf OpenMediaVault Basic Setup and all following chapters about OpenMediaVault] before proceed to the more advance setup below.
Please go through the [http://files.syabas.com/popcornhour/download/PopcornHourTransformerNAS_UserManual-20180122.pdf OpenMediaVault Basic Setup and all following chapters about OpenMediaVault] before proceed to the more advance setup below.


== Dynamic DNS ==
== Dynamic DNS ==
<pre<noinclude></noinclude> style="white-space: pre-wrap; white-space: -moz-pre-wrap; white-space: -pre-wrap; white-space: -o-pre-wrap; word-wrap: break-word;">
[YOU CAN SKIP THIS IF YOU ARE USING STATIC IP ON YOUR INTERNET WAN OR YOU ALREADY KNOW HOW TO SETUP DYNAMIC DNS ON YOUR INTERNET MODEM/ROUTER]
[YOU CAN SKIP THIS IF YOU ARE USING STATIC IP ON YOUR INTERNET WAN OR YOU ALREADY KNOW HOW TO SETUP DYNAMIC DNS ON YOUR INTERNET MODEM/ROUTER]


Line 10: Line 7:


2. # apt-get install ddclient  (no-ip.com example)
2. # apt-get install ddclient  (no-ip.com example)
 
* Dynamic DNS service provider: other
Dynamic DNS service provider: other
* Dynamic DNS server: dynupdate.no-ip.com
Dynamic DNS server: dynupdate.no-ip.com
* Dynamic DNS update protocol: dyndns2
Dynamic DNS update protocol: dyndns2
* Username for dynamic DNS service: <<<USERNAME/EMAIL>>>
Username for dynamic DNS service: <<<USERNAME/EMAIL>>>
* Password for dynamic DNS service: <<<PASSWORD>>>
Password for dynamic DNS service: <<<PASSWORD>>>
* Re-enter password to verify: <<<PASSWORD>>>
Re-enter password to verify: <<<PASSWORD>>>
* Network interface used for dynamic DNS service: web
Network interface used for dynamic DNS service: web
* DynDNS fully qualified domain names: <<<CNAME>>>.ddns.net
DynDNS fully qualified domain names: <<<CNAME>>>.ddns.net
* Run ddclient on PPP connect? No
Run ddclient on PPP connect? No
* Run ddclient as daemon? Yes
Run ddclient as daemon? Yes
* Interval between ddclient runs: 300
Interval between ddclient runs: 300


# dpkg-reconfigure ddclient  (To Re-run configuration wizard above)
# dpkg-reconfigure ddclient  (To Re-run configuration wizard above)
Line 30: Line 26:
To:    use=web, web=checkip.dyndns.com, web-skip='Current IP Address'
To:    use=web, web=checkip.dyndns.com, web-skip='Current IP Address'


##########
##########
protocol=dyndns2
protocol=dyndns2
use=web, web=checkip.dyndns.com, web-skip='Current IP Address'
use=web, web=checkip.dyndns.com, web-skip='Current IP Address'
server=dynupdate.no-ip.com
server=dynupdate.no-ip.com
login=<<<USERNAME/EMAIL>>>
login=<<<USERNAME/EMAIL>>>
password='<<<PASSWORD>>>'
password='<<<PASSWORD>>>'
<<<CNAME>>>.ddns.net
<<<CNAME>>>.ddns.net
##########
##########


After edit, press [CTRL+x]  =>  press [y]  =>  press [Enter] to exit
After edit, press [CTRL+x]  =>  press [y]  =>  press [Enter] to exit
Line 47: Line 43:
# ddclient -daemon=0 -debug -verbose -noquiet
# ddclient -daemon=0 -debug -verbose -noquiet
# systemctl status ddclient
# systemctl status ddclient
</pre>


== NextCloud ==
== NextCloud ==
<pre<noinclude></noinclude> style="white-space: pre-wrap; white-space: -moz-pre-wrap; white-space: -pre-wrap; white-space: -o-pre-wrap; word-wrap: break-word;">
Reference: https://forum.openmediavault.org/index.php/Thread/17738-NextCloud-Installation/
Reference: https://forum.openmediavault.org/index.php/Thread/17738-NextCloud-Installation/


Line 59: Line 51:
# apt-get update
# apt-get update
# apt-get upgrade
# apt-get upgrade
  - Configuring openmediavault  =>  Press [Tab]  =>  Press [Enter] on Ok
* Configuring openmediavault  =>  Press [Tab]  =>  Press [Enter] on Ok
# apt-get install php5-curl php5-gd
# apt-get install php5-curl php5-gd


2. Create the Shared Folders for all your Nginx's web pages
2. Create the Shared Folders for all your Nginx's web pages
    - Name: www
Name: www
    - Path: www/
Path: www/
    - Click on the ACL
Click on the ACL
      - User/Groups permissions: Tick Read/Write for both www-data user and group
** User/Groups permissions: Tick Read/Write for both www-data user and group
      - Set Owner / Group to Read/Write/Execute and Others to None
** Set Owner / Group to Read/Write/Execute and Others to None


3. Create the sub shared folder for your NextCloud web pages
3. Create the sub shared folder for your NextCloud web pages
    - Name: nextcloud
* Name: nextcloud
    - Path: www/nextcloud
* Path: www/nextcloud
    - Click on the ACL
* Click on the ACL
      - User/Groups permissions: Tick Read/Write for both www-data user and group
** User/Groups permissions: Tick Read/Write for both www-data user and group
      - Set Owner / Group to Read/Write/Execute and Others to None
** Set Owner / Group to Read/Write/Execute and Others to None


4. Go to System  =>  Plugins  =>  Tick openmediavault-nginx  =>  Install
4. Go to System  =>  Plugins  =>  Tick openmediavault-nginx  =>  Install
Line 81: Line 73:


6. Services  =>  Nginx  =>  Pools  =>  Add
6. Services  =>  Nginx  =>  Pools  =>  Add
    - Name: pool_nextcloud
* Name: pool_nextcloud
    - User: www-data
* User: www-data
    - Group: www-data
* Group: www-data
    - Extra options: <<<Copy Texts In Between ########## Below>>>
* Extra options: <<<Copy Texts In Between ########## Below>>>


##########
##########
clear_env = no
clear_env = no
env[HOSTNAME] = $HOSTNAME
env[HOSTNAME] = $HOSTNAME
env[PATH] = /usr/local/bin:/usr/bin:/bin
env[PATH] = /usr/local/bin:/usr/bin:/bin
env[TMP] = /tmp
env[TMP] = /tmp
env[TMPDIR] = /tmp
env[TMPDIR] = /tmp
env[TEMP] = /tmp
env[TEMP] = /tmp
##########
##########


    - Save  =>  Apply
* Save  =>  Apply


7. Services  =>  Nginx  =>  Servers  =>  Add
7. Services  =>  Nginx  =>  Servers  =>  Add
    - General
* General
      - Directory: nextcloud
** Directory: nextcloud
    - SSL
* SSL
      - Enable SSL: Enable
** Enable SSL: Enable
      - Port: 91
** Port: 91
      - Certificate: <<<Select Created SSL Certificate>>>
** Certificate: <<<Select Created SSL Certificate>>>
          - System  =>  Certificates  =>  SSL  =>  Add  =>  Create (Set longer "Period of validity" if you do not want to renew the certificate too frequently)  =>  Save  =>  Apply
* System  =>  Certificates  =>  SSL  =>  Add  =>  Create (Set longer "Period of validity" if you do not want to renew the certificate too frequently)  =>  Save  =>  Apply
      - Only use SSL: Enable
** Only use SSL: Enable
    - PHP
* PHP
      - Enable PHP: Enable
** Enable PHP: Enable
      - PHP-FPM Pool: pool_nextcloud
** PHP-FPM Pool: pool_nextcloud
    - Extra options: <<<Copy Texts In Between ########## Below>>>
* Extra options: <<<Copy Texts In Between ########## Below>>>
 
##########
add_header Strict-Transport-Security "max-age=15768000; includeSubDomains; preload;";
add_header X-Content-Type-Options nosniff;
add_header X-Frame-Options "SAMEORIGIN";
add_header X-XSS-Protection "1; mode=block";
add_header X-Robots-Tag none;
add_header X-Download-Options noopen;
add_header X-Permitted-Cross-Domain-Policies none;
 
location = /robots.txt {
log_not_found off;
allow all;
access_log off;
}
 
# The following 2 rules are only needed for the user_webfinger app.
# Uncomment it if you're planning to use this app.
#rewrite ^/.well-known/host-meta /public.php?service=host-meta last;
#rewrite ^/.well-known/host-meta.json /public.php?service=host-meta-json
# last;
location = /.well-known/carddav {
return 301 $scheme://$host/remote.php/dav;
}
 
location = /.well-known/caldav {
return 301 $scheme://$host/remote.php/dav;
}
 
# set max upload size
client_max_body_size 50G;
fastcgi_buffers 64 4K;
 
# Disable gzip to avoid the removal of the ETag header
gzip off;
 
# Uncomment if your server is build with the ngx_pagespeed module
# This module is currently not supported.
#pagespeed off;
 
error_page 403 /core/templates/403.php;
error_page 404 /core/templates/404.php;
location / {
rewrite ^ /index.php$uri;
}
 
location ~ ^/(?:build|tests|config|lib|3rdparty|templates|data)/ {
deny all;
}
 
location ~ ^/(?:\.|autotest|occ|issue|indie|db_|console) {
deny all;
}
 
location ~ ^/(?:index|remote|public|cron|core/ajax/update|status|ocs/v[12]|updater/.+|ocs-provider/.+|core/templates/40[34])\.php(?:$|/) {
fastcgi_split_path_info ^(.+\.php)(/.*)$;
include fastcgi_params;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
fastcgi_param PATH_INFO $fastcgi_path_info;
fastcgi_param HTTPS on;
#Avoid sending the security headers twice
fastcgi_param modHeadersAvailable true;
fastcgi_param front_controller_active true;
fastcgi_pass $socket;
fastcgi_intercept_errors on;
}
 
location ~ ^/(?:updater|ocs-provider)(?:$|/) {
try_files $uri/ =404;
index index.php;
}
 
# Adding the cache control header for js and css files
# Make sure it is BELOW the PHP block
location ~* \.(?:css|js|woff|svg|gif)$ {
try_files $uri /index.php$uri$is_args$args;
add_header Cache-Control "public, max-age=7200";
add_header Strict-Transport-Security "max-age=15768000; includeSubDomains; preload;";
add_header X-Content-Type-Options nosniff;
add_header X-Frame-Options "SAMEORIGIN";
add_header X-XSS-Protection "1; mode=block";
add_header X-Robots-Tag none;
add_header X-Download-Options noopen;
add_header X-Permitted-Cross-Domain-Policies none;
# Optional: Don't log access to assets
access_log off;
}


location ~* \.(?:png|html|ttf|ico|jpg|jpeg)$ {
##########
try_files $uri /index.php$uri$is_args$args;
add_header Strict-Transport-Security "max-age=15768000; includeSubDomains; preload;";
# Optional: Don't log access to other assets
add_header X-Content-Type-Options nosniff;
access_log off;
add_header X-Frame-Options "SAMEORIGIN";
}
add_header X-XSS-Protection "1; mode=block";
##########
add_header X-Robots-Tag none;
add_header X-Download-Options noopen;
add_header X-Permitted-Cross-Domain-Policies none;
location = /robots.txt {
log_not_found off;
allow all;
access_log off;
}
# The following 2 rules are only needed for the user_webfinger app.
# Uncomment it if you're planning to use this app.
#rewrite ^/.well-known/host-meta /public.php?service=host-meta last;
#rewrite ^/.well-known/host-meta.json /public.php?service=host-meta-json
# last;
location = /.well-known/carddav {
return 301 $scheme://$host/remote.php/dav;
}
location = /.well-known/caldav {
return 301 $scheme://$host/remote.php/dav;
}
# set max upload size
client_max_body_size 50G;
fastcgi_buffers 64 4K;
# Disable gzip to avoid the removal of the ETag header
gzip off;
# Uncomment if your server is build with the ngx_pagespeed module
# This module is currently not supported.
#pagespeed off;
error_page 403 /core/templates/403.php;
error_page 404 /core/templates/404.php;
location / {
rewrite ^ /index.php$uri;
}
location ~ ^/(?:build|tests|config|lib|3rdparty|templates|data)/ {
deny all;
}
location ~ ^/(?:\.|autotest|occ|issue|indie|db_|console) {
deny all;
}
location ~ ^/(?:index|remote|public|cron|core/ajax/update|status|ocs/v[12]|updater/.+|ocs-provider/.+|core/templates/40[34])\.php(?:$|/) {
fastcgi_split_path_info ^(.+\.php)(/.*)$;
include fastcgi_params;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
fastcgi_param PATH_INFO $fastcgi_path_info;
fastcgi_param HTTPS on;
#Avoid sending the security headers twice
fastcgi_param modHeadersAvailable true;
fastcgi_param front_controller_active true;
fastcgi_pass $socket;
fastcgi_intercept_errors on;
}
location ~ ^/(?:updater|ocs-provider)(?:$|/) {
try_files $uri/ =404;
index index.php;
}
# Adding the cache control header for js and css files
# Make sure it is BELOW the PHP block
location ~* \.(?:css|js|woff|svg|gif)$ {
try_files $uri /index.php$uri$is_args$args;
add_header Cache-Control "public, max-age=7200";
add_header Strict-Transport-Security "max-age=15768000; includeSubDomains; preload;";
add_header X-Content-Type-Options nosniff;
add_header X-Frame-Options "SAMEORIGIN";
add_header X-XSS-Protection "1; mode=block";
add_header X-Robots-Tag none;
add_header X-Download-Options noopen;
add_header X-Permitted-Cross-Domain-Policies none;
# Optional: Don't log access to assets
access_log off;
}
location ~* \.(?:png|html|ttf|ico|jpg|jpeg)$ {
try_files $uri /index.php$uri$is_args$args;
# Optional: Don't log access to other assets
access_log off;
}
##########


8. Go to System  =>  Plugins  =>  Tick openmediavault-mysql  =>  Install
8. Go to System  =>  Plugins  =>  Tick openmediavault-mysql  =>  Install


9. Services  =>  MySQL  =>  Enable  =>  Save  =>  Apply
9. Services  =>  MySQL  =>  Enable  =>  Save  =>  Apply =>  Reset Password
                        =>  Reset Password


10. Go to https://nextcloud.com/  =>  Download  =>  Get Nextcloud Server  =>  Download  =>  Web Installer (Bottom Tab)  =>  Download setup-nextcloud.php to your PC
10. Go to https://nextcloud.com/  =>  Download  =>  Get Nextcloud Server  =>  Download  =>  Web Installer (Bottom Tab)  =>  Download setup-nextcloud.php to your PC
Line 215: Line 206:


12. Go to https://<<<DEVICE_IP>>>:91/setup-nextcloud.php
12. Go to https://<<<DEVICE_IP>>>:91/setup-nextcloud.php
    - Please add exception for the self-signed certificate if your browser prompt you to do so
* Please add exception for the self-signed certificate if your browser prompt you to do so
    - Next
* Next
    - Dependency check: Enter a single "."  =>  Next
* Dependency check: Enter a single "."  =>  Next
    - Wait until: 504 Gateway Time-out
* Wait until: 504 Gateway Time-out


13. Go to https://<<<DEVICE_IP>>>:91/  (Retry again if you get 404)
13. Go to https://<<<DEVICE_IP>>>:91/  (Retry again if you get 404)
    - Click on Storage & database  =>  MySQL/MariaDB
* Click on Storage & database  =>  MySQL/MariaDB
        - Database user: root
** Database user: root
        - Database password: <<<Password Reset On Step #10>>>
** Database password: <<<Password Reset On Step #10>>>
        - Database name: nextcloud
** Database name: nextcloud
        - Database host: localhost
** Database host: localhost
    - Finish setup
* Finish setup


14. Services  =>  Nginx  =>  Servers  =>  Edit
14. Services  =>  Nginx  =>  Servers  =>  Edit
    - PHP  =>  Default config: Disable
* PHP  =>  Default config: Disable


15. Go to https://<<<DEVICE_IP>>>:91/
15. Go to https://<<<DEVICE_IP>>>:91/


16. If installation failed on step #12 onwards:
16. If installation failed on step #12 onwards:
    - Remove all the folders/files/hidden files in www/nextcloud/* through FTP/SAMBA/etc (Note that, removing 13,000+ files may take a while)
* Remove all the folders/files/hidden files in www/nextcloud/* through FTP/SAMBA/etc (Note that, removing 13,000+ files may take a while)
    - Services  =>  MySQL  =>  SQL management site  =>  Enable  =>  Save  =>  Apply  =>  Show
** Services  =>  MySQL  =>  SQL management site  =>  Enable  =>  Save  =>  Apply  =>  Show
        - Tools  =>  Database Manager  =>  tick "nextcloud" and "DROP selected databases"  =>  Submit
* Tools  =>  Database Manager  =>  tick "nextcloud" and "DROP selected databases"  =>  Submit
    - Start over again from step #12
** Start over again from step #12


17. Setup the [[#Dynamic DNS|Dynamic DNS]] if you need to access your NextCloud through internet. Then, on your internet modem/router: Port Forward to the device with port 91
17. Setup the [[#Dynamic DNS|Dynamic DNS]] if you need to access your NextCloud through internet. Then, on your internet modem/router: Port Forward to the device with port 91
</pre>

Latest revision as of 13:43, 5 February 2023

Please go through the OpenMediaVault Basic Setup and all following chapters about OpenMediaVault before proceed to the more advance setup below.

Dynamic DNS

[YOU CAN SKIP THIS IF YOU ARE USING STATIC IP ON YOUR INTERNET WAN OR YOU ALREADY KNOW HOW TO SETUP DYNAMIC DNS ON YOUR INTERNET MODEM/ROUTER]

1. SSH to the device

2. # apt-get install ddclient (no-ip.com example)

  • Dynamic DNS service provider: other
  • Dynamic DNS server: dynupdate.no-ip.com
  • Dynamic DNS update protocol: dyndns2
  • Username for dynamic DNS service: <<<USERNAME/EMAIL>>>
  • Password for dynamic DNS service: <<<PASSWORD>>>
  • Re-enter password to verify: <<<PASSWORD>>>
  • Network interface used for dynamic DNS service: web
  • DynDNS fully qualified domain names: <<<CNAME>>>.ddns.net
  • Run ddclient on PPP connect? No
  • Run ddclient as daemon? Yes
  • Interval between ddclient runs: 300
  1. dpkg-reconfigure ddclient (To Re-run configuration wizard above)

3. # nano /etc/ddclient.conf

Change: use=if, if=web To: use=web, web=checkip.dyndns.com, web-skip='Current IP Address'

##########
protocol=dyndns2
use=web, web=checkip.dyndns.com, web-skip='Current IP Address'
server=dynupdate.no-ip.com
login=<<<USERNAME/EMAIL>>>
password='<<<PASSWORD>>>'
<<<CNAME>>>.ddns.net
##########

After edit, press [CTRL+x] => press [y] => press [Enter] to exit

4. # systemctl restart ddclient (Restart ddclient after changed in configuration)

5. Diagnostics:

  1. ddclient -daemon=0 -debug -verbose -noquiet
  2. systemctl status ddclient

NextCloud

Reference: https://forum.openmediavault.org/index.php/Thread/17738-NextCloud-Installation/

1. SSH to the device

  1. apt-get update
  2. apt-get upgrade
  • Configuring openmediavault => Press [Tab] => Press [Enter] on Ok
  1. apt-get install php5-curl php5-gd

2. Create the Shared Folders for all your Nginx's web pages

  • Name: www
  • Path: www/
  • Click on the ACL
    • User/Groups permissions: Tick Read/Write for both www-data user and group
    • Set Owner / Group to Read/Write/Execute and Others to None

3. Create the sub shared folder for your NextCloud web pages

  • Name: nextcloud
  • Path: www/nextcloud
  • Click on the ACL
    • User/Groups permissions: Tick Read/Write for both www-data user and group
    • Set Owner / Group to Read/Write/Execute and Others to None

4. Go to System => Plugins => Tick openmediavault-nginx => Install

5. Services => Nginx => Settings => Enable => Save => Apply

6. Services => Nginx => Pools => Add

  • Name: pool_nextcloud
  • User: www-data
  • Group: www-data
  • Extra options: <<<Copy Texts In Between ########## Below>>>
##########
clear_env = no
env[HOSTNAME] = $HOSTNAME
env[PATH] = /usr/local/bin:/usr/bin:/bin
env[TMP] = /tmp
env[TMPDIR] = /tmp
env[TEMP] = /tmp
##########
  • Save => Apply

7. Services => Nginx => Servers => Add

  • General
    • Directory: nextcloud
  • SSL
    • Enable SSL: Enable
    • Port: 91
    • Certificate: <<<Select Created SSL Certificate>>>
  • System => Certificates => SSL => Add => Create (Set longer "Period of validity" if you do not want to renew the certificate too frequently) => Save => Apply
    • Only use SSL: Enable
  • PHP
    • Enable PHP: Enable
    • PHP-FPM Pool: pool_nextcloud
  • Extra options: <<<Copy Texts In Between ########## Below>>>
##########
add_header Strict-Transport-Security "max-age=15768000; includeSubDomains; preload;";
add_header X-Content-Type-Options nosniff;
add_header X-Frame-Options "SAMEORIGIN";
add_header X-XSS-Protection "1; mode=block";
add_header X-Robots-Tag none;
add_header X-Download-Options noopen;
add_header X-Permitted-Cross-Domain-Policies none;

location = /robots.txt {
log_not_found off;
allow all;
access_log off;
}

# The following 2 rules are only needed for the user_webfinger app.
# Uncomment it if you're planning to use this app.
#rewrite ^/.well-known/host-meta /public.php?service=host-meta last;
#rewrite ^/.well-known/host-meta.json /public.php?service=host-meta-json
# last;
location = /.well-known/carddav {
return 301 $scheme://$host/remote.php/dav;
}

location = /.well-known/caldav {
return 301 $scheme://$host/remote.php/dav;
}

# set max upload size
client_max_body_size 50G;
fastcgi_buffers 64 4K;

# Disable gzip to avoid the removal of the ETag header
gzip off;

# Uncomment if your server is build with the ngx_pagespeed module
# This module is currently not supported.
#pagespeed off;

error_page 403 /core/templates/403.php;
error_page 404 /core/templates/404.php;
location / {
rewrite ^ /index.php$uri;
}

location ~ ^/(?:build|tests|config|lib|3rdparty|templates|data)/ {
deny all;
}

location ~ ^/(?:\.|autotest|occ|issue|indie|db_|console) {
deny all;
}

location ~ ^/(?:index|remote|public|cron|core/ajax/update|status|ocs/v[12]|updater/.+|ocs-provider/.+|core/templates/40[34])\.php(?:$|/) {
fastcgi_split_path_info ^(.+\.php)(/.*)$;
include fastcgi_params;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
fastcgi_param PATH_INFO $fastcgi_path_info;
fastcgi_param HTTPS on;
#Avoid sending the security headers twice
fastcgi_param modHeadersAvailable true;
fastcgi_param front_controller_active true;
fastcgi_pass $socket;
fastcgi_intercept_errors on;
}

location ~ ^/(?:updater|ocs-provider)(?:$|/) {
try_files $uri/ =404;
index index.php;
}

# Adding the cache control header for js and css files
# Make sure it is BELOW the PHP block
location ~* \.(?:css|js|woff|svg|gif)$ {
try_files $uri /index.php$uri$is_args$args;
add_header Cache-Control "public, max-age=7200";
add_header Strict-Transport-Security "max-age=15768000; includeSubDomains; preload;";
add_header X-Content-Type-Options nosniff;
add_header X-Frame-Options "SAMEORIGIN";
add_header X-XSS-Protection "1; mode=block";
add_header X-Robots-Tag none;
add_header X-Download-Options noopen;
add_header X-Permitted-Cross-Domain-Policies none;
# Optional: Don't log access to assets
access_log off;
}

location ~* \.(?:png|html|ttf|ico|jpg|jpeg)$ {
try_files $uri /index.php$uri$is_args$args;
# Optional: Don't log access to other assets
access_log off;
}
##########

8. Go to System => Plugins => Tick openmediavault-mysql => Install

9. Services => MySQL => Enable => Save => Apply => Reset Password

10. Go to https://nextcloud.com/ => Download => Get Nextcloud Server => Download => Web Installer (Bottom Tab) => Download setup-nextcloud.php to your PC

11. Use FTP/SAMBA/etc to transfer setup-nextcloud.php to www/nextcloud/

12. Go to https://<<<DEVICE_IP>>>:91/setup-nextcloud.php

  • Please add exception for the self-signed certificate if your browser prompt you to do so
  • Next
  • Dependency check: Enter a single "." => Next
  • Wait until: 504 Gateway Time-out

13. Go to https://<<<DEVICE_IP>>>:91/ (Retry again if you get 404)

  • Click on Storage & database => MySQL/MariaDB
    • Database user: root
    • Database password: <<<Password Reset On Step #10>>>
    • Database name: nextcloud
    • Database host: localhost
  • Finish setup

14. Services => Nginx => Servers => Edit

  • PHP => Default config: Disable

15. Go to https://<<<DEVICE_IP>>>:91/

16. If installation failed on step #12 onwards:

  • Remove all the folders/files/hidden files in www/nextcloud/* through FTP/SAMBA/etc (Note that, removing 13,000+ files may take a while)
    • Services => MySQL => SQL management site => Enable => Save => Apply => Show
  • Tools => Database Manager => tick "nextcloud" and "DROP selected databases" => Submit
    • Start over again from step #12

17. Setup the Dynamic DNS if you need to access your NextCloud through internet. Then, on your internet modem/router: Port Forward to the device with port 91