Search results
Jump to navigation
Jump to search
File:BlispArguments.png Arguments that can be used with Blisp ...port (COM in windows, ttyACM in Linux). This example is COM3 but it could be different, check the Windows device manager).(925 × 185 (19 KB)) - 21:03, 20 April 2023
File:Hall-effect-sensor03.jpg Be mindful not to damage the via holes above the 3 leg side.(634 × 1,286 (102 KB)) - 01:10, 18 March 2023
File:Pinephone-1.1-flash-schematic.png Schematic view of the Pinephone v1.1 (Don't be Evil) devkit's flash LED driver(509 × 356 (34 KB)) - 13:57, 20 February 2023
File:Martijnpocket.jpg Martijn with a Project don't be evil Pinephone devkit in his pocket(1,512 × 2,016 (1.34 MB)) - 15:58, 20 February 2023
File:Schematic VCONN switches.png Excerpt from the PinePhone schematic showing switches that need to be replaced prior to PCB revision 1.2a(1,495 × 318 (66 KB)) - 17:42, 20 February 2023
File:Show-hidden.png ...at Windows may have already assigned to unknown devices/software that may be causing conflicts or no longer used or needed.(274 × 267 (18 KB)) - 22:50, 27 May 2023
File:Martjin VCONN switches 1.1.jpg Close-up of the VCONN switches that need to be replaced on PinePhone models prior to 1.2a to enable some USB functionality(1,920 × 1,080 (274 KB)) - 15:48, 20 February 2023
File:Braveheart VBUS 1 to VBUS at pogopin.jpg ! Be careful that in revisions following Braveheart the pogopins usage could cha(1,280 × 960 (238 KB)) - 15:42, 20 February 2023
File:USB C PD shared watts charger.jpg ...et the full 20V 3.25a PD65w on these chargers, then only a single port can be used at a time. Plugging in Pinecil and other things to the other ports wou(469 × 389 (48 KB)) - 01:22, 24 February 2023
File:PCP-Top-side-screen.jpg ...s U14 with a Hall Effect Sensor. U14 is an empty footprint, the Sensor can be added after purchase by the end-user.(2,359 × 888 (1.69 MB)) - 22:38, 6 March 2023
