SOEDGE

From PINE64
Revision as of 18:47, 19 October 2020 by Abcde (talk | contribs) (added category)
Jump to navigation Jump to search

Software and OS Image Downloads

SOEdge_Software_Release

penguin.png BSP

Accessories Step-by-Step Guides

Under 'Guides for model A baseboard accessories' you can find instructions and guides concerning:

  • Enclosures
  • Bluetooth and WiFi module
  • Real Time Clock (RTC) battery
  • Real Time Clock (RTC) battery holder
  • First and third party cases
  • Featured 3D printed cases (and more)

SoC and Memory Specification

  • Based on Rockchip RK1808
RK1808 icon.png

CPU Architecture

  • Dual-core ARM Cortex-A35 Processor@1600-2000Mhz
  • A power-efficient ARM 64-Bit Armv8-A architecture
  • AArch32 for full backward compatibility with Armv7
  • Support NEON Advanced SIMD (Single Instruction Multiple Data) instruction for acceleration of media and signal processing function
  • Support Large Physical Address Extensions(LPAE)
  • VFPv4 Floating Point Unit
  • 32KB L1 Instruction cache and 32KB L1 Data cache
  • AArch64 for 64-bit support and new architectural features
  • TrustZone security technology
  • Neon Advanced SIMD
  • DSP and SIMD extensions
  • VFPv4 Floating point
  • Hardware virtualization support
  • 128KB L2 cache


Neural Process Unit NPU Capability

Vivante Acuity SDK.jpg




System Memory

  • RAM Memory Variants: 2GB DDR4.
  • Storage Memory: SPI Flash and optional eMMC module from 16GB up to 128GB

SOEdge Baseboard Features

Network

  • 10/100/1000Mbps Etherne
  • WiFi 802.11 b/g/n with Bluetooth 4.0 (optional)

Storage

  • microSD - bootable, support SDHC and SDXC, storage up to 256GB
  • USB - 2 USB2.0 Host port

Expansion Ports

  • DSI - Display Serial Interface, 4 lanes MiPi, up to 1080P
  • CSI - CMOS Camera Interface up to 5 mega pixel
  • TP - Touch Panel Port, SPI with interrupt
  • RTC - Real Time Clock Battery Connector
  • VBAT - Lithium Battery Connector with temperature sensor input
  • Wifi/BT Module Header - SDIO 3.0 and UART
  • 2x20 pins "Pi2" GPIO Header
  • PCIe 2x open ended slot

SOEdge Module and Baseboard Information, Schematics, and Certifications

  • Model "A" Baseboard Dimensions: 133mm x 80mm x 19mm
  • Input Power: DC 12V @ 3A 5.5OD/2.1ID Barrel DC Jack connector

Datasheets for Components and Peripherals

SOEdge/SOPine Cluster Board Resource

Other Resources