SOEDGE

From PINE64
Revision as of 20:21, 16 November 2020 by Ian-S-McB (talk | contribs) (Fix CPU spec link)
Jump to navigation Jump to search

Software and OS Image Downloads

SOEdge Software Release

The SOEdge software releases can be found in the article SOEdge Software Release.

Accessories Step-by-Step Guides

Under 'Guides for model A baseboard accessories' you can find instructions and guides concerning:

  • Enclosures
  • Bluetooth and WiFi module
  • Real Time Clock (RTC) battery
  • Real Time Clock (RTC) battery holder
  • First and third party cases
  • Featured 3D printed cases (and more)

SoC and Memory Specification

  • Based on Rockchip RK1808
RK1808 icon.png

CPU Architecture

  • Dual-core ARM Cortex-A35 Processor@1600-2000Mhz
  • A power-efficient ARM 64-Bit Armv8-A architecture
  • AArch32 for full backward compatibility with Armv7
  • Support NEON Advanced SIMD (Single Instruction Multiple Data) instruction for acceleration of media and signal processing function
  • Support Large Physical Address Extensions(LPAE)
  • VFPv4 Floating Point Unit
  • 32KB L1 Instruction cache and 32KB L1 Data cache
  • AArch64 for 64-bit support and new architectural features
  • TrustZone security technology
  • Neon Advanced SIMD
  • DSP and SIMD extensions
  • VFPv4 Floating point
  • Hardware virtualization support
  • 128KB L2 cache


Neural Process Unit NPU Capability

Vivante Acuity SDK.jpg


System Memory

  • RAM Memory Variants: 2GB DDR4.
  • Storage Memory: SPI Flash and optional eMMC module from 16GB up to 128GB

SOEdge Baseboard Features

Network

  • 10/100/1000Mbps Etherne
  • WiFi 802.11 b/g/n with Bluetooth 4.0 (optional)

Storage

  • microSD - bootable, support SDHC and SDXC, storage up to 256GB
  • USB - 2 USB2.0 Host port

Expansion Ports

  • DSI - Display Serial Interface, 4 lanes MiPi, up to 1080P
  • CSI - CMOS Camera Interface up to 5 mega pixel
  • TP - Touch Panel Port, SPI with interrupt
  • RTC - Real Time Clock Battery Connector
  • VBAT - Lithium Battery Connector with temperature sensor input
  • Wifi/BT Module Header - SDIO 3.0 and UART
  • 2x20 pins "Pi2" GPIO Header
  • PCIe 2x open ended slot

SOEdge Module and Baseboard Information, Schematics, and Certifications

  • Model "A" Baseboard Dimensions: 133mm x 80mm x 19mm
  • Input Power: DC 12V @ 3A 5.5OD/2.1ID Barrel DC Jack connector

Datasheets for Components and Peripherals

SOEdge/SOPine Cluster Board Resource

Other Resources