Difference between revisions of "ROCKPro64 Software Releases"

From PINE64
Jump to navigation Jump to search
(→‎Manjaro ARM: Linking Manjaro KDE plasma 20.02.1 release link)
(Add OpenWRT)
Line 406: Line 406:
*** MD5 (XZ file): fdfacfa8560356ba8d3aff0762c3e7cc
*** MD5 (XZ file): fdfacfa8560356ba8d3aff0762c3e7cc
*** File Size: 4.06GB
*** File Size: 4.06GB
== OpenWrt ==
[[File:Openwrt-logo.png|300px]]
=== OpenWrt Snapshot Build [microSD Boot] ===
* OpenWrt with 5.4 mainline linux kernel
** DD image (for 512MB micoSD card and above)
** [https://downloads.openwrt.org/snapshots/targets/rockchip/armv8/ OpenWrt snapshot page]
* To find out more on installation process, please visit their [https://openwrt.org/inbox/toh/pine64/pine64_rockpro64_v2.1 wiki]
* Login with SSH on
** default IP: 192.168.1.1
** username: root
* Install a WebGUI: [https://openwrt.org/docs/guide-quick-start/ssh_connect_to_the_internet_and_install_luci Use SSH to connect to the internet and install Luci Web interface]


= BSD Images =
= BSD Images =

Revision as of 16:44, 21 April 2020

Linux Images

Please note recent release notes for all 0.7.x images below:

  • 0.7.9: Fix upgrade problem (u-boot-* packages),
  • 0.7.8: Improve eMMC compatibility on RockPro64,
  • 0.7.8: Disable sdio (no wifi/bt) to fix pcie/nvme support on 4.4 for RockPro64,
  • 0.7.8: Fix OMV builds (missing initrd.img),
  • 0.7.8: Make all packages virtual, conflicting and replacing making possible to do linux-rock64/rockpro64 to replace basesystem,
  • 0.7.7: Fix memory corruptions caused by Mali/Display subsystem (4.4),
  • 0.7.7: Enable SDR104 mode for SD cards (this requires u-boot upgrade if booting from SD),
  • 0.7.6: Change OPP's for Rock64 and RockPro64: ayufan-rock64/linux-kernel@4.4.132-1059-rockchip-ayufan...ayufan-rock64:4.4.132-1062-rockchip-ayufan,
  • 0.7.5: Various stability fixes for kernel and u-boot,
  • 0.7.5: Added memtest to kernels and extlinux,
  • 0.7.5: Show early boot log when booting kernels,
  • 0.7.4: Fix resize_rootfs.sh script to respect boot flags (fixes second boot problem introduced by 0.7.0),
  • 0.7.4: Add rock(pro)64_erase_spi_flash.sh,
  • 0.7.4: Fix cursor on desktop for rockpro64,

Armbian

armbian.png

Armbian Debian Buster Desktop [microSD / eMMC Boot] [5.91]

  • DD image to microSD card or eMMC module and boot. Highly recommend using Etcher
  • Login with
    • username: root
    • password: 1234
  • To find out more about Armbian and available options please visit their site

Armbian Debian Stretch Desktop [microSD / eMMC Boot] [5.90]

  • DD image to microSD card or eMMC module and boot. Highly recommend using Etcher
  • Login with
    • username: root
    • password: 1234
  • To find out more about Armbian and available options please visit their site

Armbian Ubuntu 18.04 Bionic Desktop [microSD / eMMC Boot] [5.90]

  • DD image to microSD card or eMMC module and boot. Highly recommend using Etcher
  • Login with
    • username: root
    • password: 1234
  • To find out more about Armbian and available options please visit their site

Armbian Debian Buster Minimal [microSD / eMMC Boot] [5.91]

  • DD image to microSD card or eMMC module and boot. Highly recommend using Etcher
  • Login with
    • username: root
    • password: 1234
  • To find out more about Armbian and available options please visit their site

Armbian Debian Stretch Minimal [microSD / eMMC Boot] [5.90]

  • DD image to microSD card or eMMC module and boot. Highly recommend using Etcher
  • Login with
    • username: root
    • password: 1234
  • To find out more about Armbian and available options please visit their site

Armbian Ubuntu 18.04 Bionic Minimal [microSD / eMMC Boot] [5.90]

  • DD image to microSD card or eMMC module and boot. Highly recommend using Etcher
  • Login with
    • username: root
    • password: 1234
  • To find out more about Armbian and available options please visit their site

Ubuntu 18.04 Bionic

penguin.png

Forum thread concerning this release can be found here

LXDE Desktop 32bit (armhf) [microSD / eMMC Boot] [0.8.3]

Mate Desktop 32bit (armhf) [microSD / eMMC Boot] [0.8.3]

Minimal 64bit (arm64) [microSD / eMMC Boot] [0.8.3]

Minimal 32bit (armhf) [microSD / eMMC Boot] [0.8.3]

Containers 64bit (arm64) (DockerCE & Kubernetes) [microSD / eMMC Boot] [0.8.3]

Debian by mrfixit2001

debian.png

Forum thread concerning this release can be found here

Minimal Debian [microSD / eMMC Boot]

Debian Stretch

debian.png

Forum thread concerning this release can be found here

Minimal 64bit (aarch64) [microSD / eMMC Boot] [0.8.3]

DietPi

dietpi.png

DietPi Community Build Image [microSD / eMMC boot]

Forum thread concerning this release can be found here

  • DD image to microSD card or eMMC module and boot. Highly recommend using Etcher
  • Login with
    • username: root
    • password: dietpi

Arch

Folks are working on getting Arch going here in the forum.

OpenMediaVault

omv.png

OpenMediaVault is the next generation network attached storage (NAS) solution, click this link to OMV main page to learn more.

Forum thread concerning this release can be found here

Stretch 32bit (armhf) [microSD / eMMC Boot] [0.8.3]

Stretch 64bit (aarch64) [microSD / eMMC Boot] [0.8.3]

LibreELEC(KODI)

libreelec.png

Official LibreElec KODI Leia 9.2 Build Image [microSD / eMMC boot]


Slackware

slackware.png

Slackware Aarch64 Base Community Build Image [microSD Boot] [20191127]

  • System without a graphical shell
  • DD image to microSD card and boot. Highly recommend using Etcher

Slackware Aarch64 XFCE Community Build Image [microSD Boot] [20191127]

  • System with a graphical shell
  • DD image to microSD card and boot. Highly recommend using Etcher

Slackware Aarch64 Miniroot Community Build Image [microSD Boot] [20190628]

Slackware Aarch64 XFCE Community Build Image [microSD Boot] [20190628]

  • Login with
    • Username : root
    • Password : password
  • To run the OS on eMMC
    • Flash the image to micro SD, power up the board with micro SD and login
    • Copy the image file to micro SD by using SFTP. The image file must be in .img. note : root user are not allow transfer file to micro SD.
    • After finish copy the file, power off the board and add eMMC module to the board
    • Bootup the board, run below command for flashing to eMMC module
      • >>dd if=[image file] of=/dev/mmcblk1 bs=10M
        • example : dd if=slack-current-aarch64-xfce_29Sep18-4.4.162-rockpro64-build-20181126.img of=/dev/mmcblk1 bs=10M
      • then edit 2 files in eMMC module:
      • >> mount /dev/mmcblk1p1 /media
      • >> echo "rootdev=/dev/mmcblk1p1" >> /media/boot/uEnv.txt
      • >> sed -i 's:mmcblk0p1:mmcblk1p1:' /media/etc/fstab
    • After done, power off board and remove micro SD. Then bootup with only eMMC module.

Nems Linux

nems.jpg

  • NEMS stands for "Nagios Enterprise Monitoring Server" and it is a modern pre-configured, customized and ready-to-deploy Nagios Core image designed to run on low-cost micro computers.
  • To find out more about NEMS on the PINE64 and available tweaks to the installation please visit the PINE64 forum thread
  • Login with
    • Username: nemsadmin
    • Password: nemsadmin

NEMS Linux [microSD / eMMC Boot] [v1.5 - build 1]

NextCloudPi

nextcloudpi.png

NextCloudPi Community Build Image [microSD / eMMC Boot] [03-10-19]

  • NextCloudPi comes not only with NextCloud preinstalled, but also with management tools for backups, SSL certificates, SAMBA, enhanced security and more.
  • Visit the project's website
  • You can follow the ongoing discussion about NextCloudPi on the forum
  • DD image to microSD card and boot. Highly recommend using Etcher
  • Login with
    • username: root
    • password: 1234

Cent OS

centos.jpg

CentOS-7 Community Build Image [microSD Boot]

  • Centos-7.4.1708 with kernel from Armbian-5.67 (minimum build)
  • To find out more on installation process, please visit their Project31 site
  • Login with
    • username: root
    • password: centos

Manjaro ARM

manjaro.png

  • To learn more about Manjaro please visit Manjaro Forum
  • DD image to microSD card or eMMC module. Highly recommend using Etcher
  • Console and SSH default login:
    • username: manjaro
    • password: manjaro

Manjaro KDE Plasma Release [20.02.1]

Manjaro KDE ARM Community Build Image [microSD / eMMC Boot] [preview1]

Manjaro KDE ARM Community Build Image [microSD Boot] [19.06]

Manjaro LXQT ARM Community Build Image [microSD Boot] [19.06]

Manjaro ARM Minimal Community Build Image [microSD Boot] [19.06]

Chromium

chromium.jpg

  • To learn more please visit Forum
  • DD image to microSD card or eMMC module. Highly recommend using Etcher

Chromium Community Build Image [microSD / eMMC Boot] [Beta (R76)]

Batocera Linux

batocera_linux.png

Batocera Linux Community Build Image [microSD / eMMC Boot] [5.25-20200310]

Batocera Linux Community Build Image [microSD / eMMC Boot] [5.24-20191108]

Recalbox

recalbox.png

Recalbox Community Build Image [microSD / eMMC Boot]

Odroid Retro Arena

odroidretroarena.png

Odroid Retro Arena Community Build Image [microSD / eMMC Boot] [Beta 0.0.8]

  • This is a BETA and therefore is not updatable nor supported however bugs or issues are appreciated to be identified and shared via the issues tab on our GitHub so that we can address them in the future. The Roshambo Case support is baked in with one major caveat due to kernel limitation: You can power the unit off by the POWER switch and the RESET button works 100% however to power the unit on you will need to manually plug/unplug the power cord. This limitation will not be present in future releases.
  • Visit the project's [1]
  • You can follow the ongoing discussion about Odroid Retro Arena on the forum
  • DD image to microSD card and boot. Highly recommend using Etcher

OpenWrt

File:Openwrt-logo.png

OpenWrt Snapshot Build [microSD Boot]

BSD Images

NetBSD

File:Netbsd2.png

To learn more about NetBSD please visit NetBSD main page

OpenBSD

openbsd.jpg

Instructions to get OPenBSD on your ROCKPro64 are here.

Forum discussions are there.

Android Images

Android 9.0.0

android_9.png

Stock for DD method [eMMC Boot] [20190427]

  • DD image to eMMC module using USB adapter for eMMC module and boot. Highly recommend using Etcher or PINE64 Installer
  • Please allow 3-5 minutes boot up time on first time for initialization
  • Please ignore "internal problem with your device" popup message if appear on Android boot-up page.
  • This build supports PINE64 7" LCD panel and UI follow tablet way (means not Android TV)
  • DD image for 16GB eMMC module
  • DD image for 32GB eMMC module
  • DD image for 64GB eMMC module

Stock for DD method [micro SD Boot] [20190506]

  • DD image to microSD card and boot.
  • Highly recommend using Etcher or PINE64 Installer
  • Please allow 3-5 minutes boot up time on first time for initialization
  • Please ignore "internal problem with your device" popup message if appear on Android boot-up page.
  • This build supports PINE64 7" LCD panel and UI follow tablet way (means not Android TV)
  • DD image for 8GB microSD card
  • DD image for 16GB microSD card
  • DD image for 32GB microSD card
  • DD image for 64GB microSD card

Stock for RK Flash tool [eMMC Boot] [20190427]

  • Please unzip first and then using Android tool to flash in
  • The OTG port located at USB type-C connector, needs USB type A to type C cable.
  • Please allow 3-5 minutes boot up time on first time for initialization
  • This build supports PINE64 7" LCD panel and UI follow tablet way (means not Android TV)
  • Direct download from pine64.org
    • MD5 (GZip file): 046BA4A07933120809FBE1B9577B7341
    • File Size: 592MB

Android 8.1.0

android_8.png

Stock for DD method [eMMC Boot] [20180828]

  • DD image to eMMC module using USB adapter for eMMC module and boot. Highly recommend using Etcher or PINE64 Installer
  • Please allow 3-5 minutes boot up time on first time for initialization
  • This build supports PINE64 7" LCD panel and UI follow tablet way (means not Android TV)
  • Direct download from pine64.org
    • MD5 (XZ file): 9AEE21BC1B9DE886DCB0E64FA123988A
    • File Size: 414MB

Stock for DD method [micro SD Boot] [20181212]

  • DD image to microSD card and boot.
  • Highly recommend using Etcher or PINE64 Installer
  • Please allow 3-5 minutes boot up time on first time for initialization
  • This build supports PINE64 7" LCD panel and UI follow tablet way (means not Android TV)
  • DD image (for 8GB micoSD card and above)
  • Direct download from pine64.org
    • MD5 (XZ file): 5A6BB7FCD7B3F77FCEE99CE462AE7405
    • File Size: 616MB

Stock for RK Flash tool [eMMC Boot] [20180828]

  • Please unzip first and then using Android tool to flash in
  • The OTG port located at USB type-C connector, needs USB type A to type C cable.
  • Please allow 3-5 minutes boot up time on first time for initialization
  • This build supports PINE64 7" LCD panel and UI follow tablet way (means not Android TV)
  • Direct download from pine64.org
    • MD5 (XZ file): 4DACFE927BB09EE9C56B5232A7F624EE
    • File Size: 415MB

Android 7.1.2

android_7.png

Stock for DD method [eMMC Boot] [20180809]

  • DD image to eMMC module using USB adapter for eMMC module and boot.
  • Highly recommend using Etcher or PINE64 Installer
  • Please allow 3-5 minutes boot up time on first time for initialization
  • This build supports PINE64 7" LCD panel and UI follow tablet way (means not Android TV)
  • Direct download from pine64.org
    • MD5 (XZ file): 00F194017557017C2588724686E90CEA
    • File Size: 498MB

Stock for RK Flash tool [eMMC Boot] [20180809]

  • Please unzip first and then using Android tool to flash in
  • The OTG port located at USB type-C connector, needs USB type A to type C cable.
  • Please allow 3-5 minutes boot up time on first time for initialization
  • This build supports PINE64 7" LCD panel and UI follow tablet way (means not Android TV)
  • Direct download from pine64.org
    • MD5 (XZ file): 197A9905B48441D8655E7542F4643FE9
    • File Size: 483MB

Stock for DD method [micro SD Boot] [20180920]

  • DD image to microSD card and boot.
  • Highly recommend using Etcher or PINE64 Installer
  • Please allow 3-5 minutes boot up time on first time for initialization
  • This build supports PINE64 7" LCD panel and UI follow tablet way (means not Android TV)
  • Direct download from pine64.org
    • MD5 (XZ file): CE39642A379B357BB3E4BC80ACA2E0CE
    • File Size: 765MB

Stock for DD method [eMMC Boot] [20180518]

  • DD image to eMMC module using USB adapter for eMMC module and boot. Highly recommend using Etcher or PINE64 Installer
  • Please allow 3-5 minutes boot up time on first time for initialization
  • This build supports PINE64 7" LCD panel and UI follow tablet way (means not Android TV)
  • Direct download from pine64.org
    • MD5 (XZ file): 33622034ACDBC31A7D7BB01ED634E29B
    • File Size: 345MB

Stock for RK Flash tool [eMMC Boot] [20180518]

  • Please unzip first and then using Android tool to flash in
  • The OTG port located at USB type-C connector, needs USB type A to type C cable.
  • Please allow 3-5 minutes boot up time on first time for initialization
  • This build supports PINE64 7" LCD panel and UI follow tablet way (means not Android TV)
  • Direct download from pine64.org
    • MD5 (XZ file): 90C1991DADAE13ADC94E927F171F8920
    • File Size: 342MB

Stock for install from SDcard to eMMC [microSD Boot] [20180921]

  • DD image to microSD card and boot. Highly recommend using Etcher or PINE64 Installer
  • Please allow 3-5 minutes boot up time on first time for initialization
  • This build supports PINE64 7" LCD panel and UI follow tablet way (means not Android TV)
  • Direct download from pine64.org
    • MD5 (XZ file): c6900e82a1d6ef397dcac241f76f43c9
    • File Size: 350MB

Android SDK

Android P SDK [v9.0]

Android NN (Neural Network) SDK Release Note

Android O SDK [v8.1]

Android N SDK [v7.1]

For Linux Developer

The Ayufan github page

Below are the LPDDR4 driver for RK3399

ROCKPro64 related files

Miscellaneous tools

Top of page