Difference between revisions of "ROCKPro64 Software Release"

From PINE64
Jump to navigation Jump to search
m (General grammar, formatting, typos)
(__TOC__ div float:right, logos floating to not appear under TOC, combined debians, added some descriptions.)
Line 1: Line 1:
= Linux Images =
+
<div style=float:right>__TOC__</div>
 +
= Linux =
 +
== Debian ==
 +
=== Official Debian Installer ===
 +
<div style=float:right>[[File:debian.png|center|100px]]</div>
 +
<blockquote>As of April 2020 [https://d-i.debian.org/daily-images/arm64/daily/netboot/SD-card-images/ Debian have a ROCKPro64 images available]. See forum thread [https://forum.pine64.org/showthread.php?tid=9744 here].</blockquote>
  
== Official Debian ==
+
Instructions for creating a bootable image are in the README file on the Debian website, as at June 2020 these were too short
[[File:debian.png|right|100px]]
 
 
 
As of April 2020 [https://d-i.debian.org/daily-images/arm64/daily/netboot/SD-card-images/ Debian have a ROCKPro64 image available]. See forum thread [https://forum.pine64.org/showthread.php?tid=9744 here].
 
 
 
Instructions for creating a bootable image are in the README file on the Debian website, as at June 2020 these were in short
 
 
* Download: <code>firmware.rockpro64-rk3399.img.gz</code>
 
* Download: <code>firmware.rockpro64-rk3399.img.gz</code>
 
* Download: <code>partition.img.gz</code>
 
* Download: <code>partition.img.gz</code>
 
* Create the disk image:
 
* Create the disk image:
** For Linux: <code><nowiki>zcat firmware.rockpro64-rk3399.img.gz partition.img.gz > complete_image.img</nowiki></code>
+
** For Linux: <code>zcat firmware.rockpro64-rk3399.img.gz partition.img.gz<nowiki> > </nowiki>complete_image.img></code>
** For Mac: <code><nowiki>gzcat firmware.rockpro64-rk3399.img.gz partition.img.gz > complete_image.img
+
** For Mac: <code>gzcat firmware.rockpro64-rk3399.img.gz partition.img.gz<nowiki> > </nowiki>complete_image.img</code>
</nowiki></code>
 
 
* Write the image to your boot device:
 
* Write the image to your boot device:
 
** For Linux: <code>dd if=complete_image.img of=your_chosen_boot_device bs=4M</code>
 
** For Linux: <code>dd if=complete_image.img of=your_chosen_boot_device bs=4M</code>
Line 19: Line 18:
 
What you now have is the official Debian installer that will boot and run on your ROCKPro64. You will need an Ethernet connection and to answer the various installer questions/options.
 
What you now have is the official Debian installer that will boot and run on your ROCKPro64. You will need an Ethernet connection and to answer the various installer questions/options.
  
== Manjaro ARM [microSD / eMMC Boot] ==
+
 
[[File:Manjaro.png|right|100px]]
+
=== Community Debian builds ===
 +
''' ayufan Debian and Ubuntu Release '''
 +
<div style=float:right>[[File:penguin.png|right|100px]]</div>
 +
Forum thread concerning these releases can be found [https://forum.pine64.org/showthread.php?tid=6308 here]
 +
 
 +
A number of release versions are available based on either Ubuntu or Debian. In addition releases are available that are [https://github.com/ayufan-rock64/linux-build/releases/tag/0.9.14 stable] (based on a 4.4 kernel which has all the RockChip patches in it) or [https://github.com/ayufan-rock64/linux-build/releases pre-releases] (based on the latest linux kernel). An overview of the philosophy is [https://github.com/ayufan-rock64/linux-build on this GitHub page.]
 +
 
 +
Clicking through on any chosen release header (or expanding the "assets" section under the Changelog) will provide options to download many images suitable for the ROCKPro64 as well as others suitable for other devices such as the Rock64 and PinebookPro - please read the download filenames carefully to choose precisely the image you desire.
 +
 
 +
 
 +
''' Mrfixit2001 Debian Release '''
 +
<div style=float:right>[[File:debian.png|right|100px]]</div>
 +
Mrfixit has engineered 2 releases based on Debian.
 +
 
 +
''' Feature complete desktop release '''
 +
See forum thread [https://forum.pine64.org/showthread.php?tid=7269 here.]
 +
 
 +
* DD image to microSD card or eMMC module and boot. Highly recommend using [https://etcher.io/ Etcher]
 +
** [https://github.com/mrfixit2001/debian_desktop/releases Direct download from GitHub]
 +
* Login with
 +
** username: rock
 +
** password: rock
 +
 
 +
''' Minimal Debian '''
 +
Forum thread concerning this release can be found [https://forum.pine64.org/showthread.php?tid=7055 here]
 +
 
 +
* DD image to microSD card or eMMC module and boot. Highly recommend using [https://etcher.io/ Etcher]
 +
** [https://github.com/mrfixit2001/debian_builds/releases Direct download from mrfixit2001's github]
 +
* Login with
 +
** username: rock
 +
** password: rock
 +
 
 +
== Manjaro ARM ==
 +
<div style=float:right>[[File:Manjaro.png|right|100px]]</div>
  
 
* To learn more about Manjaro please visit [https://forum.manjaro.org/tags/manjaroarm Manjaro Forum]  
 
* To learn more about Manjaro please visit [https://forum.manjaro.org/tags/manjaroarm Manjaro Forum]  
Line 28: Line 60:
 
** password: manjaro
 
** password: manjaro
  
=== Manjaro KDE ARM Community Build Image [microSD / eMMC Boot]  ===
+
''' Manjaro KDE ARM Community Build Image [microSD / eMMC Boot]  '''
 
* [https://osdn.net/projects/manjaro-arm/storage/rockpro64/kde-plasma/ Direct download from osdn.net]
 
* [https://osdn.net/projects/manjaro-arm/storage/rockpro64/kde-plasma/ Direct download from osdn.net]
  
=== Manjaro MATE ARM Community Build Image [microSD / eMMC Boot] ===
+
''' Manjaro MATE ARM Community Build Image [microSD / eMMC Boot] '''
 
* [https://osdn.net/projects/manjaro-arm/storage/rockpro64/mate/ Direct download from osdn.net]
 
* [https://osdn.net/projects/manjaro-arm/storage/rockpro64/mate/ Direct download from osdn.net]
  
=== Manjaro XFCE ARM Community Build Image [microSD / eMMC Boot] ===
+
''' Manjaro XFCE ARM Community Build Image [microSD / eMMC Boot] '''
 
* [[https://osdn.net/projects/manjaro-arm/storage/rockpro64/xfce/ Direct download from osdn.net]
 
* [[https://osdn.net/projects/manjaro-arm/storage/rockpro64/xfce/ Direct download from osdn.net]
  
=== Manjaro I3 ARM Community Build Image [microSD / eMMC Boot] ===
+
''' Manjaro I3 ARM Community Build Image [microSD / eMMC Boot] '''
 
* [https://osdn.net/projects/manjaro-arm/storage/rockpro64/i3/ Direct download from osdn.net]
 
* [https://osdn.net/projects/manjaro-arm/storage/rockpro64/i3/ Direct download from osdn.net]
  
=== Manjaro SWAY ARM Community Build Image [microSD / eMMC Boot] ===
+
''' Manjaro SWAY ARM Community Build Image [microSD / eMMC Boot] '''
 
* [https://osdn.net/projects/manjaro-arm/storage/rockpro64/sway/ Direct download from osdn.net]
 
* [https://osdn.net/projects/manjaro-arm/storage/rockpro64/sway/ Direct download from osdn.net]
 
 
  
 
== Armbian==
 
== Armbian==
 +
<div style=float:right>[[File:armbian.png|right|100px]]</div>
 
If you are booting from a Micro SD card, then both Linux kernel versions will work. If you are trying to boot from an eMMC module then the 4.4.y will work, but the newer 5.10.y will not.
 
If you are booting from a Micro SD card, then both Linux kernel versions will work. If you are trying to boot from an eMMC module then the 4.4.y will work, but the newer 5.10.y will not.
 
[[File:armbian.png|right|100px]]
 
  
 
* To find out more about Armbian and available options please visit their [https://www.armbian.com/rockpro64/ site]
 
* To find out more about Armbian and available options please visit their [https://www.armbian.com/rockpro64/ site]
Line 54: Line 83:
 
* DD image to microSD card or eMMC module and boot. Highly recommend using [https://etcher.io/ Etcher]
 
* DD image to microSD card or eMMC module and boot. Highly recommend using [https://etcher.io/ Etcher]
  
=== Armbian Debian Buster XFCE Desktop [microSD / eMMC Boot] ===
+
''' Armbian Debian Buster XFCE Desktop [microSD / eMMC Boot] '''
 
* Armbian provides a mainline kernel build images for Debian Buster with XFCE Desktop
 
* Armbian provides a mainline kernel build images for Debian Buster with XFCE Desktop
 
* DD image (for 8GB microSD card or eMMC Module and above)
 
* DD image (for 8GB microSD card or eMMC Module and above)
 
** [https://dl.armbian.com/rockpro64/Buster_current_desktop Armbian's ROCKPro64 Debian Buster XFCE Desktop download site]
 
** [https://dl.armbian.com/rockpro64/Buster_current_desktop Armbian's ROCKPro64 Debian Buster XFCE Desktop download site]
  
=== Armbian Ubuntu Focal XFCE Desktop [microSD / eMMC Boot] ===
+
''' Armbian Ubuntu Focal XFCE Desktop [microSD / eMMC Boot] '''
 
* Armbian provides a mainline kernel build images for Ubuntu Focal with XFCE Desktop
 
* Armbian provides a mainline kernel build images for Ubuntu Focal with XFCE Desktop
 
* DD image (for 8GB microSD card or eMMC Module and above)
 
* DD image (for 8GB microSD card or eMMC Module and above)
 
** [https://dl.armbian.com/rockpro64/Focal_current_desktop Armbian's ROCKPro64 Ubuntu Focal XFCE Desktop download site]
 
** [https://dl.armbian.com/rockpro64/Focal_current_desktop Armbian's ROCKPro64 Ubuntu Focal XFCE Desktop download site]
  
=== Armbian Ubuntu Bionic for Server and Light Desktop [microSD / eMMC Boot] ===
+
''' Armbian Ubuntu Bionic for Server and Light Desktop [microSD / eMMC Boot] '''
 
* Armbian provides a mainline kernel build images for Ubuntu Bionic
 
* Armbian provides a mainline kernel build images for Ubuntu Bionic
 
* DD image (for 8GB microSD card or eMMC Module and above)
 
* DD image (for 8GB microSD card or eMMC Module and above)
 
** [https://dl.armbian.com/rockpro64/Bionic_current Armbian's ROCKPro64 Ubuntu Bionic download site]
 
** [https://dl.armbian.com/rockpro64/Bionic_current Armbian's ROCKPro64 Ubuntu Bionic download site]
  
=== Armbian Ubuntu Focal for Server and Light Desktop [microSD / eMMC Boot] ===
+
''' Armbian Ubuntu Focal for Server and Light Desktop [microSD / eMMC Boot] '''
 
* Armbian provides a mainline kernel build images for Ubuntu Focal
 
* Armbian provides a mainline kernel build images for Ubuntu Focal
 
* DD image (for 8GB microSD card or eMMC Module and above)
 
* DD image (for 8GB microSD card or eMMC Module and above)
 
** [https://dl.armbian.com/rockpro64/Focal_current Armbian's ROCKPro64 Ubuntu Focal download site]
 
** [https://dl.armbian.com/rockpro64/Focal_current Armbian's ROCKPro64 Ubuntu Focal download site]
 
 
  
 
== AOSC ==
 
== AOSC ==
[[File:aosc.png|right|100px]]
+
<div style=float:right>[[File:aosc.png|right|100px]]</div>
 
+
To learn more about AOSC, please visit the official [https://aosc.io/ AOSC website]
* To learn more about AOSC, please visit the official [https://aosc.io/ AOSC website]
 
 
* AOSC using LZ4 compression algorithm, please visit the [https://github.com/lz4/lz4 LZ4 github site] for utility
 
* AOSC using LZ4 compression algorithm, please visit the [https://github.com/lz4/lz4 LZ4 github site] for utility
 
* 8GB microSD card or eMMC module and above
 
* 8GB microSD card or eMMC module and above
Line 85: Line 111:
 
** username: aosc
 
** username: aosc
 
** password: anthon
 
** password: anthon
=== AOSC KDE Community Build Image [microSD and eMMC Boot] ===
+
 
 +
''' AOSC KDE Community Build Image [microSD and eMMC Boot] '''
 
* [https://releases.aosc.io/os-arm64/rockchip64/kde/rockpro64/ Direct download from AOSC]
 
* [https://releases.aosc.io/os-arm64/rockchip64/kde/rockpro64/ Direct download from AOSC]
  
=== AOSC GNOME Community Build Image [microSD and eMMC Boot] ===
+
''' AOSC GNOME Community Build Image [microSD and eMMC Boot] '''
 
* [https://releases.aosc.io/os-arm64/rockchip64/gnome/rockpro64/ Direct download from AOSC]
 
* [https://releases.aosc.io/os-arm64/rockchip64/gnome/rockpro64/ Direct download from AOSC]
  
=== AOSC MATE Community Build Image [microSD and eMMC Boot] ===
+
''' AOSC MATE Community Build Image [microSD and eMMC Boot] '''
 
* [https://releases.aosc.io/os-arm64/rockchip64/mate/rockpro64/ Direct download from AOSC]
 
* [https://releases.aosc.io/os-arm64/rockchip64/mate/rockpro64/ Direct download from AOSC]
  
=== AOSC Cinnamon Community Build Image [microSD and eMMC Boot] ===
+
''' AOSC Cinnamon Community Build Image [microSD and eMMC Boot] '''
 
* [https://releases.aosc.io/os-arm64/rockchip64/cinnamon/rockpro64/ Direct download from AOSC]
 
* [https://releases.aosc.io/os-arm64/rockchip64/cinnamon/rockpro64/ Direct download from AOSC]
  
=== AOSC XFCE Community Build Image [microSD and eMMC Boot] ===
+
''' AOSC XFCE Community Build Image [microSD and eMMC Boot] '''
 
* [https://releases.aosc.io/os-arm64/rockchip64/xfce/rockpro64/ Direct download from AOSC]
 
* [https://releases.aosc.io/os-arm64/rockchip64/xfce/rockpro64/ Direct download from AOSC]
  
=== AOSC LXDE Community Build Image [microSD and eMMC Boot] ===
+
''' AOSC LXDE Community Build Image [microSD and eMMC Boot] '''
 
* [https://releases.aosc.io/os-arm64/rockchip64/lxde/rockpro64/ Direct download from AOSC]
 
* [https://releases.aosc.io/os-arm64/rockchip64/lxde/rockpro64/ Direct download from AOSC]
 
 
  
 
== Twister OS ==
 
== Twister OS ==
[[File:Twister_OS.png|right|100px]]
+
<div style=float:right>[[File:Twister_OS.png|right|100px]]</div>
 
 
 
=== Twister OS Armbian-Reforged XFCE Desktop beta images [SD boot]===
 
=== Twister OS Armbian-Reforged XFCE Desktop beta images [SD boot]===
 
* For more information on Twister OS, please visit this {https://twisteros.com/ official site]
 
* For more information on Twister OS, please visit this {https://twisteros.com/ official site]
Line 128: Line 152:
 
** username: pi
 
** username: pi
 
** password: root
 
** password: root
 
 
 
== Ubuntu and Debian Release by ayufan ==
 
[[File:penguin.png|right|100px]]
 
 
Forum thread concerning these releases can be found [https://forum.pine64.org/showthread.php?tid=6308 here]
 
 
A number of release versions are available based on either Ubuntu or Debian. In addition releases are available that are [https://github.com/ayufan-rock64/linux-build/releases/tag/0.9.14 stable] (based on a 4.4 kernel which has all the RockChip patches in it) or [https://github.com/ayufan-rock64/linux-build/releases pre-releases] (based on the latest linux kernel). An overview of the philosophy is [https://github.com/ayufan-rock64/linux-build on this GitHub page.]
 
 
Clicking through on any chosen release header (or expanding the "assets" section under the Changelog) will provide options to download many images suitable for the ROCKPro64 as well as others suitable for other devices such as the Rock64 and PinebookPro - please read the download filenames carefully to choose precisely the image you desire.
 
 
 
 
== Debian Release by Mrfixit2001 ==
 
[[File:debian.png|right|100px]]
 
 
Mrfixit has engineered 2 releases based on Debian.
 
 
=== Feature complete desktop release ===
 
 
See forum thread [https://forum.pine64.org/showthread.php?tid=7269 here.]
 
 
* DD image to microSD card or eMMC module and boot. Highly recommend using [https://etcher.io/ Etcher]
 
** [https://github.com/mrfixit2001/debian_desktop/releases Direct download from GitHub]
 
* Login with
 
** username: rock
 
** password: rock
 
 
=== Minimal Debian ===
 
 
Forum thread concerning this release can be found [https://forum.pine64.org/showthread.php?tid=7055 here]
 
 
* DD image to microSD card or eMMC module and boot. Highly recommend using [https://etcher.io/ Etcher]
 
** [https://github.com/mrfixit2001/debian_builds/releases Direct download from mrfixit2001's github]
 
* Login with
 
** username: rock
 
** password: rock
 
  
 
== SkiffOS ==
 
== SkiffOS ==
 
+
<div style=float:right>[[File:SkiffOS-Icon-1.png|right|100px]]</div>
[[File:SkiffOS-Icon-1.png|right|100px]]
+
Minimal cross-compiled OS optimized for hosting distributions in Docker containers. Provides the reliability of firmware with the ease-of-use of package managers.
 
 
Minimal cross-compiled OS optimized for hosting distributions in Docker containers.
 
 
 
Provides the reliability of firmware with the ease-of-use of package managers.
 
  
 
Uses the [http://buildroot.org Buildroot] cross-compilation tool for support for all Pine64 boards.
 
Uses the [http://buildroot.org Buildroot] cross-compilation tool for support for all Pine64 boards.
Line 190: Line 172:
  
 
== Slackware==
 
== Slackware==
[[File:slackware.jpg|right|100px]]
+
<div style=float:right>[[File:slackware.jpg|right|100px]]</div>
  
 
* Slackware is a very old, interesting, convenient and easy distribution.
 
* Slackware is a very old, interesting, convenient and easy distribution.
Line 226: Line 208:
 
***>> sed -i 's:mmcblk0p1:mmcblk1p1:' /media/etc/fstab
 
***>> sed -i 's:mmcblk0p1:mmcblk1p1:' /media/etc/fstab
 
**After done, power off board and remove micro SD. Then bootup with only eMMC module.
 
**After done, power off board and remove micro SD. Then bootup with only eMMC module.
 
 
  
 
== DietPi ==
 
== DietPi ==
[[File:dietpi.png|right|100px]]
+
<div style=float:right>[[File:dietpi.png|right|100px]]</div>
 
+
<blockquote>DietPi is a '''lightweight''', yet '''easy to setup''' and '''feature-rich''' Linux distribution, based on '''Debian'''. To find out more about DietPi, please visit the [https://dietpi.com/docs/ official documentation].</blockquote>
* DietPi is a '''lightweight''', yet '''easy to setup''' and '''feature-rich''' Linux distribution, based on '''Debian'''.
+
Discuss the ROCKPro64 build on the [https://forum.pine64.org/showthread.php?tid=12532 PINE64 forum thread].
* To find out more about DietPi, please visit the [https://dietpi.com/docs/ official documentation].
 
* Discuss the ROCKPro64 build on the [https://forum.pine64.org/showthread.php?tid=12532 PINE64 forum thread].
 
 
* DD image (for 4 GiB micro SD card or eMMC and above)
 
* DD image (for 4 GiB micro SD card or eMMC and above)
** [https://dietpi.com/downloads/images/DietPi_ROCKPro64-ARMv8-Buster.7z Direct download from dietpi.com]
+
:: [https://dietpi.com/downloads/images/DietPi_ROCKPro64-ARMv8-Buster.7z Direct download from dietpi.com]
 
* Login with
 
* Login with
** Username: '''root'''
+
:: Username: '''root'''
** Password: '''dietpi'''
+
:: Password: '''dietpi'''
 
 
 
 
  
 
== OpenWrt ==
 
== OpenWrt ==
[[File:OpenWrt.png|right|100px]]
+
<div style=float:right>[[File:OpenWrt.png|right|100px]]</div>
 +
<blockquote>OpenWrt ​is a highly extensible ​GNU/​Linux ​distribution for embedded devices ​(typically wireless routers). Unlike many other distributions for these routers, OpenWrt ​is built from the ground up to be a full-featured, easily modifiable operating system for your router. In practice, this means that you can have all the features you need with none of the bloat, powered by a Linux kernel ​that's more recent than most other distributions.</blockquote>
  
 
Choose a version and DD image to SD card (for 512MB microSD card and above)
 
Choose a version and DD image to SD card (for 512MB microSD card and above)
Line 280: Line 257:
  
 
== LibreELEC (KODI) ==
 
== LibreELEC (KODI) ==
[[File:libreelec.jpg|right|100px]]
+
<div style=float:right>[[File:libreelec.jpg|right|100px]]</div>
 
+
<blockquote>LibreELEC is a lightweight ‘Just enough OS’ Linux distribution purpose-built for Kodi on current and popular mediacentre hardware.</blockquote>
 
=== Official LibreElec KODI Build Image [microSD / eMMC boot] ===
 
=== Official LibreElec KODI Build Image [microSD / eMMC boot] ===
 
 
* Unzip and DD image to microSD card or eMMC module and boot. Highly recommend using [https://etcher.io/ Etcher]
 
* Unzip and DD image to microSD card or eMMC module and boot. Highly recommend using [https://etcher.io/ Etcher]
 
* 8GB microSD card or eMMC module and above
 
* 8GB microSD card or eMMC module and above
 
** [https://libreelec.tv/downloads_new/rockchip/ Direct download from LibreElec site and look for PINE64 RockPro64-LibreELEC-RK3399.arm-x.x.x-rockpro64.img.gz]
 
** [https://libreelec.tv/downloads_new/rockchip/ Direct download from LibreElec site and look for PINE64 RockPro64-LibreELEC-RK3399.arm-x.x.x-rockpro64.img.gz]
 
 
  
 
== OpenMediaVault ==
 
== OpenMediaVault ==
[[File:omv.png|right|100px]]
+
<div style=float:right>[[File:omv.png|right|100px]]</div>
 
+
<blockquote>OpenMediaVault is the next generation network attached storage (NAS) solution, [https://www.openmediavault.org/ click this link to OMV main page to learn more.]</blockquote>
OpenMediaVault is the next generation network attached storage (NAS) solution, [https://www.openmediavault.org/ click this link to OMV main page to learn more.]  
 
 
 
 
Forum thread concerning this release can be found [https://forum.pine64.org/showthread.php?tid=6308 here]
 
Forum thread concerning this release can be found [https://forum.pine64.org/showthread.php?tid=6308 here]
  
Line 326: Line 298:
 
* [[OpenMediaVault|OpenMediaVault Basic Setup]]
 
* [[OpenMediaVault|OpenMediaVault Basic Setup]]
 
* [http://omv-extras.org/joomla/index.php/omv-plugins-3/3-stable OpenMediaVault Plugins]
 
* [http://omv-extras.org/joomla/index.php/omv-plugins-3/3-stable OpenMediaVault Plugins]
 
 
  
 
== NextCloudPi==
 
== NextCloudPi==
[[File:nextcloudpi.png|right|100px]]
+
<div style=float:right>[[File:nextcloudpi.png|right|100px]]</div>
 
 
 
=== NextCloudPi Community Build Image [microSD / eMMC Boot] [03-10-19] ===
 
=== NextCloudPi Community Build Image [microSD / eMMC Boot] [03-10-19] ===
 
* NextCloudPi comes not only with NextCloud preinstalled, but also with management tools for backups, SSL certificates, SAMBA, enhanced security and more.
 
* NextCloudPi comes not only with NextCloud preinstalled, but also with management tools for backups, SSL certificates, SAMBA, enhanced security and more.
Line 343: Line 312:
 
** username: root
 
** username: root
 
** password: 1234
 
** password: 1234
 
 
  
 
== Batocera Linux ==
 
== Batocera Linux ==
[[File:batocera.png|right|100px]]
+
<div style=float:right>[[File:batocera.png|right|100px]]</div>
 
 
 
* It is an operating system in retrogaming
 
* It is an operating system in retrogaming
 
* Visit the project's website here (https://batocera.org/)
 
* Visit the project's website here (https://batocera.org/)
Line 364: Line 330:
 
*** File Size: 857MB
 
*** File Size: 857MB
 
*** MD5 (gzip file): 3228bf24e555ef75bba562dfe09f30a4
 
*** MD5 (gzip file): 3228bf24e555ef75bba562dfe09f30a4
 
 
  
 
== Recalbox ==
 
== Recalbox ==
[[File:RB.png|right|100px]]
+
<div style=float:right>[[File:RB.png|right|100px]]</div>
 
 
 
* Recalbox allows you to re-play a variety of videogame consoles and platforms in your living room, with ease!  
 
* Recalbox allows you to re-play a variety of videogame consoles and platforms in your living room, with ease!  
 
* Visit the project's website here (https://www.recalbox.com/)
 
* Visit the project's website here (https://www.recalbox.com/)
Line 377: Line 340:
 
* DD image to microSD card and boot. Highly recommend using [https://etcher.io/ Etcher]
 
* DD image to microSD card and boot. Highly recommend using [https://etcher.io/ Etcher]
 
** [https://github.com/mrfixit2001/recalbox_rockpro64/releases Direct download latest release build from mrfixit2001 github]
 
** [https://github.com/mrfixit2001/recalbox_rockpro64/releases Direct download latest release build from mrfixit2001 github]
 
 
  
 
== Retro Arena==
 
== Retro Arena==
[[File:retroarena.png|right|100px]]
+
<div style=float:right>[[File:retroarena.png|right|100px]]</div>
 
 
 
=== Retro Arena Community Build Image [microSD / eMMC Boot] [Beta 0.0.8] ===
 
=== Retro Arena Community Build Image [microSD / eMMC Boot] [Beta 0.0.8] ===
 
* This is a BETA and therefore is not update-able nor supported however bugs or issues are appreciated to be identified and shared via the issues tab on our GitHub so that we can address them in the future. The Roshambo Case support is baked in with one major caveat due to kernel limitation: You can power the unit off by the POWER switch and the RESET button works 100% however to power the unit on you will need to manually plug/unplug the power cord. This limitation will not be present in future releases.
 
* This is a BETA and therefore is not update-able nor supported however bugs or issues are appreciated to be identified and shared via the issues tab on our GitHub so that we can address them in the future. The Roshambo Case support is baked in with one major caveat due to kernel limitation: You can power the unit off by the POWER switch and the RESET button works 100% however to power the unit on you will need to manually plug/unplug the power cord. This limitation will not be present in future releases.
Line 391: Line 351:
 
*** MD5 (XZ file): fdfacfa8560356ba8d3aff0762c3e7cc
 
*** MD5 (XZ file): fdfacfa8560356ba8d3aff0762c3e7cc
 
*** File Size: 4.06GB
 
*** File Size: 4.06GB
 
 
  
 
== Nems Linux [No Longer Maintained] ==
 
== Nems Linux [No Longer Maintained] ==
[[File:nems.jpg|right|100px]]
+
<div style=float:right>[[File:nems.jpg|right|100px]]</div>
 
 
 
* NEMS stands for "Nagios Enterprise Monitoring Server" and it is a modern pre-configured, customized and ready-to-deploy Nagios Core image designed to run on low-cost micro computers.
 
* NEMS stands for "Nagios Enterprise Monitoring Server" and it is a modern pre-configured, customized and ready-to-deploy Nagios Core image designed to run on low-cost micro computers.
 
* To find out more about NEMS on the PINE64 and available tweaks to the installation please visit the [https://forum.pine64.org/showthread.php?tid=7306 PINE64 forum thread]
 
* To find out more about NEMS on the PINE64 and available tweaks to the installation please visit the [https://forum.pine64.org/showthread.php?tid=7306 PINE64 forum thread]
Line 409: Line 366:
 
*** MD5 (XZ file): 2627bc0aa81e1c55de69a621d80987a5
 
*** MD5 (XZ file): 2627bc0aa81e1c55de69a621d80987a5
 
*** File Size: 1.32GB
 
*** File Size: 1.32GB
 
 
  
 
== CentOS [No Longer Maintained] ==
 
== CentOS [No Longer Maintained] ==
[[File:Centos.png|right|100px]]
+
<div style=float:right>[[File:Centos.png|right|100px]]</div>
 
 
 
=== CentOS-7 Community Build Image [microSD Boot] ===
 
=== CentOS-7 Community Build Image [microSD Boot] ===
 
* Centos-7.4.1708 with kernel from Armbian-5.67 (minimum build)
 
* Centos-7.4.1708 with kernel from Armbian-5.67 (minimum build)
Line 423: Line 377:
 
** username: root
 
** username: root
 
** password: centos
 
** password: centos
 
 
  
 
= BSD Images =
 
= BSD Images =
 
 
==NetBSD==
 
==NetBSD==
[[File:netbsd.png|right|100px]]
+
<div style=float:right>[[File:netbsd.png|right|100px]]</div>
 
 
 
To learn more about NetBSD please visit [https://www.netbsd.org/ NetBSD main page]  
 
To learn more about NetBSD please visit [https://www.netbsd.org/ NetBSD main page]  
  
Line 440: Line 390:
 
** password: [none]
 
** password: [none]
 
* Instructions concerning enabling SSH can be found [https://www.netbsd.org/docs/guide/en/chap-boot.html#chap-boot-ssh here]
 
* Instructions concerning enabling SSH can be found [https://www.netbsd.org/docs/guide/en/chap-boot.html#chap-boot-ssh here]
 
 
  
 
==OpenBSD==
 
==OpenBSD==
[[File:Puffy_mascot_openbsd.png|right|100px]]
+
<div style=float:right>[[File:Puffy_mascot_openbsd.png|right|100px]]</div>
 
 
 
Instructions to get OpenBSD on your ROCKPro64 [https://github.com/jasperla/openbsd-rockpro64 are here.]
 
Instructions to get OpenBSD on your ROCKPro64 [https://github.com/jasperla/openbsd-rockpro64 are here.]
  
 
Forum discussions [https://forum.pine64.org/forumdisplay.php?fid=109 are there.]
 
Forum discussions [https://forum.pine64.org/forumdisplay.php?fid=109 are there.]
 
 
  
 
= Chromium OS =
 
= Chromium OS =
 
 
=== Chromium Community Build Image [microSD / eMMC Boot] [Beta (R76)] ===
 
=== Chromium Community Build Image [microSD / eMMC Boot] [Beta (R76)] ===
[[File:chromium.jpg|right|100px]]
+
<div style=float:right>[[File:chromium.jpg|right|100px]]</div>
  
 
* To learn more please visit [https://forum.pine64.org/showthread.php?tid=7659 Forum]  
 
* To learn more please visit [https://forum.pine64.org/showthread.php?tid=7659 Forum]  
Line 463: Line 407:
 
*** size: 357MB
 
*** size: 357MB
 
*** MD5 (Zip file): 9ead15fd85e039de3445abdfd3c5013e
 
*** MD5 (Zip file): 9ead15fd85e039de3445abdfd3c5013e
 
 
  
 
= Android Images =
 
= Android Images =
 
 
== Android 9.0.0 ==
 
== Android 9.0.0 ==
[[File:android_9.png|right|100px]]
+
<div style=float:right>[[File:android_9.png|right|100px]]</div>
  
 
=== Stock for DD method [eMMC Boot] [20200804] ===
 
=== Stock for DD method [eMMC Boot] [20200804] ===
Line 550: Line 491:
 
*** File Size: 663MB
 
*** File Size: 663MB
  
=== Stock for DD method [micro SD Boot] [20190506] ===
+
=== Stock for DD method [microSD Boot] [20190506] ===
 
* DD image to microSD card and boot.  
 
* DD image to microSD card and boot.  
 
* Use 'dd' to write the image to the eMMC module using the USB-to-eMMC adapter module and boot. Using [https://www.balena.io/etcher/ Etcher] or another specialized SD writing tool is preferred.
 
* Use 'dd' to write the image to the eMMC module using the USB-to-eMMC adapter module and boot. Using [https://www.balena.io/etcher/ Etcher] or another specialized SD writing tool is preferred.
Line 583: Line 524:
  
 
== Android 8.1.0 ==
 
== Android 8.1.0 ==
[[File:android_8.png|right|100px]]
+
<div style=float:right>[[File:android_8.png|right|100px]]</div>
 
 
 
=== Stock for DD method [eMMC Boot] [20180828] ===
 
=== Stock for DD method [eMMC Boot] [20180828] ===
 
* Use 'dd' to write the image to the eMMC module using the USB-to-eMMC adapter module and boot. Using [https://www.balena.io/etcher/ Etcher] or another specialized SD writing tool is preferred.
 
* Use 'dd' to write the image to the eMMC module using the USB-to-eMMC adapter module and boot. Using [https://www.balena.io/etcher/ Etcher] or another specialized SD writing tool is preferred.
Line 593: Line 533:
 
** File Size: 414MB
 
** File Size: 414MB
  
=== Stock for DD method [micro SD Boot] [20181212] ===
+
=== Stock for DD method [microSD Boot] [20181212] ===
 
* Use 'dd' to write the image to the eMMC module using the USB-to-eMMC adapter module and boot. Using [https://www.balena.io/etcher/ Etcher] or another specialized SD writing tool is preferred.
 
* Use 'dd' to write the image to the eMMC module using the USB-to-eMMC adapter module and boot. Using [https://www.balena.io/etcher/ Etcher] or another specialized SD writing tool is preferred.
 
* Please allow 3-5 minutes boot up time on first time for initialization
 
* Please allow 3-5 minutes boot up time on first time for initialization
Line 612: Line 552:
  
 
== Android 7.1.2 ==
 
== Android 7.1.2 ==
[[File:android_7.png|right|100px]]
+
<div style=float:right>[[File:android_7.png|right|100px]]</div>
 
 
 
=== Stock for DD method [eMMC Boot] [20180809] ===
 
=== Stock for DD method [eMMC Boot] [20180809] ===
 
* Use 'dd' to write the image to the eMMC module using the USB-to-eMMC adapter module and boot. Using [https://www.balena.io/etcher/ Etcher] or another specialized SD writing tool is preferred.
 
* Use 'dd' to write the image to the eMMC module using the USB-to-eMMC adapter module and boot. Using [https://www.balena.io/etcher/ Etcher] or another specialized SD writing tool is preferred.
Line 631: Line 570:
 
** File Size: 483MB
 
** File Size: 483MB
  
=== Stock for DD method [micro SD Boot] [20180920] ===
+
=== Stock for DD method [microSD Boot] [20180920] ===
 
* Use 'dd' to write the image to the eMMC module using the USB-to-eMMC adapter module and boot. Using [https://www.balena.io/etcher/ Etcher] or another specialized SD writing tool is preferred.
 
* Use 'dd' to write the image to the eMMC module using the USB-to-eMMC adapter module and boot. Using [https://www.balena.io/etcher/ Etcher] or another specialized SD writing tool is preferred.
 
* Please allow 3-5 minutes boot up time on first time for initialization
 
* Please allow 3-5 minutes boot up time on first time for initialization
Line 665: Line 604:
  
 
== Android SDK ==
 
== Android SDK ==
 
 
=== Android P SDK [v9.0] ===
 
=== Android P SDK [v9.0] ===
 
* [http://files.pine64.org/SDK/ROCKPro64/ROCKPro64_SDK_android9.0.tar.gz Direct Download from pine64.org]
 
* [http://files.pine64.org/SDK/ROCKPro64/ROCKPro64_SDK_android9.0.tar.gz Direct Download from pine64.org]

Revision as of 12:52, 13 May 2021

Contents

Linux

Debian

Official Debian Installer

Debian.png

As of April 2020 Debian have a ROCKPro64 images available. See forum thread here.

Instructions for creating a bootable image are in the README file on the Debian website, as at June 2020 these were too short

  • Download: firmware.rockpro64-rk3399.img.gz
  • Download: partition.img.gz
  • Create the disk image:
    • For Linux: zcat firmware.rockpro64-rk3399.img.gz partition.img.gz > complete_image.img>
    • For Mac: gzcat firmware.rockpro64-rk3399.img.gz partition.img.gz > complete_image.img
  • Write the image to your boot device:
    • For Linux: dd if=complete_image.img of=your_chosen_boot_device bs=4M
    • For Mac: Etcher

What you now have is the official Debian installer that will boot and run on your ROCKPro64. You will need an Ethernet connection and to answer the various installer questions/options.


Community Debian builds

ayufan Debian and Ubuntu Release

Penguin.png

Forum thread concerning these releases can be found here

A number of release versions are available based on either Ubuntu or Debian. In addition releases are available that are stable (based on a 4.4 kernel which has all the RockChip patches in it) or pre-releases (based on the latest linux kernel). An overview of the philosophy is on this GitHub page.

Clicking through on any chosen release header (or expanding the "assets" section under the Changelog) will provide options to download many images suitable for the ROCKPro64 as well as others suitable for other devices such as the Rock64 and PinebookPro - please read the download filenames carefully to choose precisely the image you desire.


Mrfixit2001 Debian Release

Debian.png

Mrfixit has engineered 2 releases based on Debian.

Feature complete desktop release See forum thread here.

Minimal Debian Forum thread concerning this release can be found here

Manjaro ARM

Manjaro.png
  • To learn more about Manjaro please visit Manjaro Forum
  • DD image to microSD card or eMMC module. Highly recommend using Etcher
  • Console and SSH default login:
    • username: manjaro
    • password: manjaro

Manjaro KDE ARM Community Build Image [microSD / eMMC Boot]

Manjaro MATE ARM Community Build Image [microSD / eMMC Boot]

Manjaro XFCE ARM Community Build Image [microSD / eMMC Boot]

Manjaro I3 ARM Community Build Image [microSD / eMMC Boot]

Manjaro SWAY ARM Community Build Image [microSD / eMMC Boot]

Armbian

Armbian.png

If you are booting from a Micro SD card, then both Linux kernel versions will work. If you are trying to boot from an eMMC module then the 4.4.y will work, but the newer 5.10.y will not.

  • To find out more about Armbian and available options please visit their site
  • Armbian packed as 7zip, please unzip first before dd.
  • DD image to microSD card or eMMC module and boot. Highly recommend using Etcher

Armbian Debian Buster XFCE Desktop [microSD / eMMC Boot]

Armbian Ubuntu Focal XFCE Desktop [microSD / eMMC Boot]

Armbian Ubuntu Bionic for Server and Light Desktop [microSD / eMMC Boot]

Armbian Ubuntu Focal for Server and Light Desktop [microSD / eMMC Boot]

AOSC

Aosc.png

To learn more about AOSC, please visit the official AOSC website

  • AOSC using LZ4 compression algorithm, please visit the LZ4 github site for utility
  • 8GB microSD card or eMMC module and above
  • Login with
    • username: aosc
    • password: anthon

AOSC KDE Community Build Image [microSD and eMMC Boot]

AOSC GNOME Community Build Image [microSD and eMMC Boot]

AOSC MATE Community Build Image [microSD and eMMC Boot]

AOSC Cinnamon Community Build Image [microSD and eMMC Boot]

AOSC XFCE Community Build Image [microSD and eMMC Boot]

AOSC LXDE Community Build Image [microSD and eMMC Boot]

Twister OS

Twister OS.png

Twister OS Armbian-Reforged XFCE Desktop beta images [SD boot]

Twister OS Monka-Manjaro XFCE Desktop beta images [SD boot]

SkiffOS

SkiffOS-Icon-1.png

Minimal cross-compiled OS optimized for hosting distributions in Docker containers. Provides the reliability of firmware with the ease-of-use of package managers.

Uses the Buildroot cross-compilation tool for support for all Pine64 boards.

Use configuration packages to configure distro:

  • core/gentoo: Gentoo optimized for Rockpro64
  • core/nixos: NixOS arm64

You can also configure the skiff core yaml file to configure multiple distros to run in parallel.

The boot-up OS can be upgraded independently from the containers.

Download location

The repository and instructions can be found here.

Slackware

Slackware.jpg


Slackware Aarch64 XFCE Community Build Image [microSD Boot]

Slackware Aarch64 Miniroot Community Build Image [microSD Boot]

  • To run the OS on eMMC
    • Flash the image to micro SD, power up the board with micro SD and login
    • Copy the image file to micro SD by using SFTP. The image file must be in .img. note : root user are not allow transfer file to micro SD.
    • After finish copy the file, power off the board and add eMMC module to the board
    • Bootup the board, run below command for flashing to eMMC module
      • >>dd if=[image file] of=/dev/mmcblk1 bs=10M
        • example : dd if=slack-current-aarch64-xfce_29Sep18-4.4.162-rockpro64-build-20181126.img of=/dev/mmcblk1 bs=10M
      • then edit 2 files in eMMC module:
      • >> mount /dev/mmcblk1p1 /media
      • >> echo "rootdev=/dev/mmcblk1p1" >> /media/boot/uEnv.txt
      • >> sed -i 's:mmcblk0p1:mmcblk1p1:' /media/etc/fstab
    • After done, power off board and remove micro SD. Then bootup with only eMMC module.

DietPi

Dietpi.png

DietPi is a lightweight, yet easy to setup and feature-rich Linux distribution, based on Debian. To find out more about DietPi, please visit the official documentation.

Discuss the ROCKPro64 build on the PINE64 forum thread.

  • DD image (for 4 GiB micro SD card or eMMC and above)
Direct download from dietpi.com
  • Login with
Username: root
Password: dietpi

OpenWrt

OpenWrt.png

OpenWrt ​is a highly extensible ​GNU/​Linux ​distribution for embedded devices ​(typically wireless routers). Unlike many other distributions for these routers, OpenWrt ​is built from the ground up to be a full-featured, easily modifiable operating system for your router. In practice, this means that you can have all the features you need with none of the bloat, powered by a Linux kernel ​that's more recent than most other distributions.

Choose a version and DD image to SD card (for 512MB microSD card and above)

default IP: 192.168.1.1
username: root

OpenWrt wiki notes: Main differences of buildbot snapshots vs. official stable releases

  • snapshots do not contain LuCI GUI by default. It needs to be installed by the user.
  • snapshots are completely untested. Just automatic builds of the most recent source code and packages. Although snapshots are usually ok, they may sometimes contain serious bugs that prevent booting the device correctly or even prevent easy sysupgrading to new versions.
  • snapshots are built daily, and that sets time limits to installing new packages with opkg. Due to kernel version checksums, you can only install “kmod” kernel modules and other kernel version dependent modules from the exactly same snapshot build. So, a few hours after flashing the firmware you may not be able to install new modules with opkg any more (as the next snapshot has been built into the download repo and has different checksums). See OpenWrt wiki for package availability time limits.

OpenWrt 21.02

  • 21.02.0-rc1
    Version: 21.02.0-rc1 (r16046-59980f7aaf)
    Date: 2021-04-21 01:29:32

OpenWrt Snapshot Build [microSD Boot]

LibreELEC (KODI)

Libreelec.jpg

LibreELEC is a lightweight ‘Just enough OS’ Linux distribution purpose-built for Kodi on current and popular mediacentre hardware.

Official LibreElec KODI Build Image [microSD / eMMC boot]

OpenMediaVault

Omv.png

OpenMediaVault is the next generation network attached storage (NAS) solution, click this link to OMV main page to learn more.

Forum thread concerning this release can be found here

Stretch 32bit (armhf) [microSD / eMMC Boot] [0.8.3]

Stretch 64bit (aarch64) [microSD / eMMC Boot] [0.8.3]

NextCloudPi

Nextcloudpi.png

NextCloudPi Community Build Image [microSD / eMMC Boot] [03-10-19]

  • NextCloudPi comes not only with NextCloud preinstalled, but also with management tools for backups, SSL certificates, SAMBA, enhanced security and more.
  • Visit the project's website
  • You can follow the ongoing discussion about NextCloudPi on the forum
  • DD image to microSD card and boot. Highly recommend using Etcher
  • Login with
    • username: root
    • password: 1234

Batocera Linux

Batocera.png

Batocera Linux Community Build Image [microSD / eMMC Boot] [5.25-20200310]

Batocera Linux Community Build Image [microSD / eMMC Boot] [5.24-20191108]

Recalbox

RB.png

Recalbox Community Build Image [microSD / eMMC Boot]

Retro Arena

Retroarena.png

Retro Arena Community Build Image [microSD / eMMC Boot] [Beta 0.0.8]

  • This is a BETA and therefore is not update-able nor supported however bugs or issues are appreciated to be identified and shared via the issues tab on our GitHub so that we can address them in the future. The Roshambo Case support is baked in with one major caveat due to kernel limitation: You can power the unit off by the POWER switch and the RESET button works 100% however to power the unit on you will need to manually plug/unplug the power cord. This limitation will not be present in future releases.
  • Visit the project's [1]
  • You can follow the ongoing discussion about Retro Arena on the forum
  • DD image to microSD card and boot. Highly recommend using Etcher

Nems Linux [No Longer Maintained]

Nems.jpg
  • NEMS stands for "Nagios Enterprise Monitoring Server" and it is a modern pre-configured, customized and ready-to-deploy Nagios Core image designed to run on low-cost micro computers.
  • To find out more about NEMS on the PINE64 and available tweaks to the installation please visit the PINE64 forum thread
  • Login with
    • Username: nemsadmin
    • Password: nemsadmin

NEMS Linux [microSD / eMMC Boot] [v1.5 - build 1]

CentOS [No Longer Maintained]

Centos.png

CentOS-7 Community Build Image [microSD Boot]

  • Centos-7.4.1708 with kernel from Armbian-5.67 (minimum build)
  • To find out more on installation process, please visit their Project31 site
  • Login with
    • username: root
    • password: centos

BSD Images

NetBSD

Netbsd.png

To learn more about NetBSD please visit NetBSD main page

OpenBSD

Puffy mascot openbsd.png

Instructions to get OpenBSD on your ROCKPro64 are here.

Forum discussions are there.

Chromium OS

Chromium Community Build Image [microSD / eMMC Boot] [Beta (R76)]

Chromium.jpg
  • To learn more please visit Forum
  • DD image to microSD card or eMMC module. Highly recommend using Etcher

Android Images

Android 9.0.0

Android 9.png

Stock for DD method [eMMC Boot] [20200804]

  • Use 'dd' to write the image to the eMMC module using the USB-to-eMMC adapter module and boot. Using Etcher or another specialized SD writing tool is preferred.
  • Please allow 3-5 minutes boot up time on first time for initialization
  • Supports new RockPro64 AP6256 Wifi/BT module
  • Support Sony IMX214 camera module and works on both MiPi-CSI ports
  • This build supports PINE64 7" LCD panel with tablet UI (not Android TV)
  • DD image for 8GB eMMC module
  • DD image for 16GB eMMC module
  • DD image for 32GB eMMC module
  • DD image for 64GB eMMC module

Stock for RK Flash tool [eMMC Boot] [20200804]

  • Please unzip first and then using Android tool to flash in
  • The OTG port located at USB type-C connector, needs USB type A to type C cable.
  • Direct download from pine64.org
    • MD5 (GZip file): 9ac830527814521e15b009fa2503c9e3
    • File Size: 589MB


Stock for DD method [eMMC Boot] [20200708]

  • Use 'dd' to write the image to the eMMC module using the USB-to-eMMC adapter module and boot. Using Etcher or another specialized SD writing tool is preferred.
  • Please allow 3-5 minutes boot up time on first time for initialization
  • Supports new RockPro64 AP6256 Wifi/BT module
  • This build supports PINE64 7" LCD panel with tablet UI (not Android TV)
  • DD image for 8GB eMMC module
  • DD image for 16GB eMMC module
  • DD image for 32GB eMMC module
  • DD image for 64GB eMMC module

Stock for RK Flash tool [eMMC Boot] [20200708]

  • Please unzip first and then using Android tool to flash in
  • The OTG port located at USB type-C connector, needs USB type A to type C cable.
  • Direct download from pine64.org
    • MD5 (GZip file): 6d060ddd47ebcfd5cfcdbf90ec042c97
    • File Size: 589MB


Stock for DD method [eMMC Boot] [20190427]

  • Use 'dd' to write the image to the eMMC module using the USB-to-eMMC adapter module and boot. Using Etcher or another specialized SD writing tool is preferred.
  • Please allow 3-5 minutes boot up time on first time for initialization
  • Please ignore "internal problem with your device" popup message if appear on Android boot-up page.
  • This build supports PINE64 7" LCD panel with tablet UI (not Android TV)
  • DD image for 16GB eMMC module
  • DD image for 32GB eMMC module
  • DD image for 64GB eMMC module

Stock for DD method [microSD Boot] [20190506]

  • DD image to microSD card and boot.
  • Use 'dd' to write the image to the eMMC module using the USB-to-eMMC adapter module and boot. Using Etcher or another specialized SD writing tool is preferred.
  • Please allow 3-5 minutes boot up time on first time for initialization
  • Please ignore "internal problem with your device" popup message if appear on Android boot-up page.
  • This build supports PINE64 7" LCD panel with tablet UI (not Android TV)
  • DD image for 8GB microSD card
  • DD image for 16GB microSD card
  • DD image for 32GB microSD card
  • DD image for 64GB microSD card

Stock for RK Flash tool [eMMC Boot] [20190427]

  • Please unzip first and then using Android tool to flash in
  • The OTG port located at USB type-C connector, needs USB type A to type C cable.
  • Please allow 3-5 minutes boot up time on first time for initialization
  • This build supports PINE64 7" LCD panel with tablet UI (not Android TV)
  • Direct download from pine64.org
    • MD5 (GZip file): 046BA4A07933120809FBE1B9577B7341
    • File Size: 592MB

Android 8.1.0

Android 8.png

Stock for DD method [eMMC Boot] [20180828]

  • Use 'dd' to write the image to the eMMC module using the USB-to-eMMC adapter module and boot. Using Etcher or another specialized SD writing tool is preferred.
  • Please allow 3-5 minutes boot up time on first time for initialization
  • This build supports PINE64 7" LCD panel with tablet UI (not Android TV)
  • Direct download from pine64.org
    • MD5 (XZ file): 9AEE21BC1B9DE886DCB0E64FA123988A
    • File Size: 414MB

Stock for DD method [microSD Boot] [20181212]

  • Use 'dd' to write the image to the eMMC module using the USB-to-eMMC adapter module and boot. Using Etcher or another specialized SD writing tool is preferred.
  • Please allow 3-5 minutes boot up time on first time for initialization
  • This build supports PINE64 7" LCD panel with tablet UI (not Android TV)
  • DD image (for 8GB microSD card and above)
  • Direct download from pine64.org
    • MD5 (XZ file): 5A6BB7FCD7B3F77FCEE99CE462AE7405
    • File Size: 616MB

Stock for RK Flash tool [eMMC Boot] [20180828]

  • Please unzip first and then using Android tool to flash in
  • The OTG port located at USB type-C connector, needs USB type A to type C cable.
  • Please allow 3-5 minutes boot up time on first time for initialization
  • This build supports PINE64 7" LCD panel with tablet UI (not Android TV)
  • Direct download from pine64.org
    • MD5 (XZ file): 4DACFE927BB09EE9C56B5232A7F624EE
    • File Size: 415MB

Android 7.1.2

Android 7.png

Stock for DD method [eMMC Boot] [20180809]

  • Use 'dd' to write the image to the eMMC module using the USB-to-eMMC adapter module and boot. Using Etcher or another specialized SD writing tool is preferred.
  • Please allow 3-5 minutes boot up time on first time for initialization
  • This build supports PINE64 7" LCD panel with tablet UI (not Android TV)
  • Direct download from pine64.org
    • MD5 (XZ file): 00F194017557017C2588724686E90CEA
    • File Size: 498MB

Stock for RK Flash tool [eMMC Boot] [20180809]

  • Please unzip first and then using Android tool to flash in
  • The OTG port located at USB type-C connector, needs USB type A to type C cable.
  • Please allow 3-5 minutes boot up time on first time for initialization
  • This build supports PINE64 7" LCD panel with tablet UI (not Android TV)
  • Direct download from pine64.org
    • MD5 (XZ file): 197A9905B48441D8655E7542F4643FE9
    • File Size: 483MB

Stock for DD method [microSD Boot] [20180920]

  • Use 'dd' to write the image to the eMMC module using the USB-to-eMMC adapter module and boot. Using Etcher or another specialized SD writing tool is preferred.
  • Please allow 3-5 minutes boot up time on first time for initialization
  • This build supports PINE64 7" LCD panel with tablet UI (not Android TV)
  • Direct download from pine64.org
    • MD5 (XZ file): CE39642A379B357BB3E4BC80ACA2E0CE
    • File Size: 765MB

Stock for DD method [eMMC Boot] [20180518]

  • Use 'dd' to write the image to the eMMC module using the USB-to-eMMC adapter module and boot. Using Etcher or another specialized SD writing tool is preferred.
  • Please allow 3-5 minutes boot up time on first time for initialization
  • This build supports PINE64 7" LCD panel with tablet UI (not Android TV)
  • Direct download from pine64.org
    • MD5 (XZ file): 33622034ACDBC31A7D7BB01ED634E29B
    • File Size: 345MB

Stock for RK Flash tool [eMMC Boot] [20180518]

  • Please unzip first and then using Android tool to flash in
  • The OTG port located at USB type-C connector, needs USB type A to type C cable.
  • Please allow 3-5 minutes boot up time on first time for initialization
  • This build supports PINE64 7" LCD panel with tablet UI (not Android TV)
  • Direct download from pine64.org
    • MD5 (XZ file): 90C1991DADAE13ADC94E927F171F8920
    • File Size: 342MB

Stock for install from SDcard to eMMC [microSD Boot] [20180921]

  • Use 'dd' to write the image to the eMMC module using the USB-to-eMMC adapter module and boot. Using Etcher or another specialized SD writing tool is preferred.
  • Please allow 3-5 minutes boot up time on first time for initialization
  • This build supports PINE64 7" LCD panel with tablet UI (not Android TV)
  • Direct download from pine64.org
    • MD5 (XZ file): c6900e82a1d6ef397dcac241f76f43c9
    • File Size: 350MB

Android SDK

Android P SDK [v9.0]

Slash TV OS

Android 7 based system including Play Store, working only from SD card (does not boot when installed on eMMC)

For Linux Developer

The Ayufan github page

Below are the LPDDR4 driver for RK3399

ROCKPro64 related files

Miscellaneous tools