ROCK64 Software Releases

From PINE64
Jump to navigation Jump to search

Linux Image Releases

Debian

debian.png

Debian Stretch Mate Community Build Image [microSD Boot] [0.5.15-136-20171222]

Debian Stretch Minimal Community Build Image [microSD Boot] by ayufan

Debian Jessie Minimal Community Build Image [microSD Boot] by ayufan


Xenial Mate eMMC

mate.png

Xenial Mate Community Build Image [microSD to eMMC] [0.5.15-136]


Xenial Mate

mate.png

Xenial Mate Community Build Image [microSD Boot] by ayufan


Artful Minimal Image

penguin.png

Artful Minimal Community Build Image [microSD Boot] by ayufan


Xenial Minimal Image

penguin.png

Xenial Minimal Community Build Image [microSD Boot] by ayufan


LibreElec

libreelec.png

LibreElec KODI Community Build Image [microSD boot] [Preliminary Alpha]

OpenMediaVault eMMC

omv.png

Jessie OpenMediaVault Community Build Image [microSD to eMMC] [0.5.15-136] by ayufan

* There's a bug with eMMC in the "Stable" version of openmediavault linked from the wiki page. In order to use eMMC, please you need to be on the latest (pre-release) version which is linked here https://github.com/ayufan-rock64/linux-build/releases

OpenMediaVault

omv.png

Jessie OpenMediaVault Community Build Image [microSD Boot] by ayufan

NextCloudPi

nextcloudplus.png

NextCloudPi Community Build Image [microSD Boot] [2018_05_10]

  • NextCloudPi comes not only with NextCloud preinstalled, but also with management tools for backups, SSL certificates, SAMBA, enhanced security and more.
  • Visit the project's website
  • You can follow the ongoing discussion about NextCloudPi on the PINE64 forum
  • DD image to microSD card and boot. Highly recommend using Etcher
  • Login with
    • username: root
    • password: 1234

Lakka

lakka.png

Lakka Community Build Image [microSD Boot]


Slackware

slackware.png

Slackware Aarch64 Miniroot Community Build Image [microSD Boot] [20180508]

Slackware Aarch64 XFCE Community Build Image [microSD Boot] [20180508]

  • Login with
    • Username : root
    • Password : password
  • To run the OS on eMMC
    • Flash the image to micro SD, power up the board with micro SD and login
    • Copy the image file to micro SD by using SFTP. The image file must be in .img. note : root user are not allow transfer file to micro SD.
    • After finish copy the file, power off the board and add eMMC module to the board
    • Bootup the board, run below command for flashing to eMMC module
      • >>dd if=[image file] of=/dev/mmcblk1 bs=10M
        • example : dd if=slack-current-aarch64-xfce_08May18-4.4.126-rock64-build-20180508.img of=/dev/mmcblk1 bs=10M
      • then edit 2 files in eMMC module:
      • >> mount /dev/mmcblk1p1 /media
      • >> echo "rootdev=/dev/mmcblk1p1" >> /media/boot/uEnv.txt
      • >> sed -i 's:mmcblk0p1:mmcblk1p1:' /media/etc/fstab
    • After done, power off board and remove micro SD. Then bootup with only eMMC module.

i3

i3.png

Xenial i3 Community Build Image [microSD Boot] by ayufan


DietPi

dietpi.png

DietPi Community Build Image [microSD boot]


Volumio Digital Audio Player

volumio.png

Volumio Digital Audio Player Community Build Image [microSD Boot] [2.390-2018-03-27]

  • Volumio is a linux-based headless DAP (digital audio player), which connects to your home stereo system or your DAC
  • Visit the project's website here
  • You can follow the ongoing discussion about Volumio on the PINE64 forum
  • DD image (for 8GB micoSD card and above)
  • Login with
    • Username: volumio
    • Password: volumio
  • Volumio is controlled using a Web-GUI which can be accessed via a web browser using the boards IP or volumio.local/


Fedora

fedora.png

Fedora Minimal Community Build Image [microSD boot] [Preliminary Build]


Yocto

yocto.png

Android Image Releases

Android 7.x eMMC

android_7.png

Android 7.1.2 Stock Image [microSD to eMMC] [Rooted] [20171204]

  • DD image to microSD card. Highly recommend using Etcher
    • Shorting the eMMC PIN with a jumper as shown on the 1st image of Guide to install stock Android build to eMMC module. After power ON the box for 2-3 second, quickly remove the jumper, then it will start writing the new image to the eMMC. Please allow around 1 minute of boot up time before UI is presented via HDMI
  • Please allow 10-15 minutes boot up time on first time for initialization
  • USB 3.0 patches
  • Enable Real Time Clock support for Popcorn Hour Transformer
  • Direct download from pine64.org
    • MD5 (XZ file): 43443467DFCAEDE767556843EB4D6707
    • File Size: 558MB
  • Set MacAddress on ROCK64

Android 7.1.2 Stock Image [eMMC Boot] [Rooted] [20171204]


Android 7.x

android_7.png

Android 7.1.2 Stock Image [microSD Boot] [Rooted] [20171204]

  • DD image to microSD card and boot. Highly recommend using Etcher
  • Please allow 10-15 minutes boot up time on first time for initialization
  • USB 3.0 patches
  • Enable Real Time Clock support for Popcorn Hour Transformer
  • Direct download from pine64.org
    • MD5 (XZ file): 56520ED3DB6E587DA140AD314A055EB2
    • File Size: 544MB


Android TV 7.x eMMC

android_7.png

Android TV 7.1 Community Build Image [microSD to eMMC] [v0.3.4-r86] by ayufan

Android TV 7.1 Community Build Image [eMMC] by ayufan


Android TV 7.x

android_7.png

Android TV 7.1 Community Build Image [microSD Boot] by ayufan