Difference between revisions of "ROCK64 Software Releases"

From PINE64
Jump to navigation Jump to search
Line 156: Line 156:
*Forum thread concerning this release can be found [https://forum.pine64.org/showthread.php?tid=6309 here]
*Forum thread concerning this release can be found [https://forum.pine64.org/showthread.php?tid=6309 here]


=== Stretch OpenMediaVault OS Image armhf for V3 and V2 board (Testing version) [microSD / eMMC Boot] [0.8.0rc14-1134] ===
=== Stretch OpenMediaVault OS Image arm64 for V3 and V2 board (Testing version) [microSD / eMMC Boot] [0.8.0rc14-1134] ===
* [https://www.openmediavault.org/ openmediavault is the next generation network attached storage (NAS) solution, click link to OMV main page to learn more]
* [https://www.openmediavault.org/ openmediavault is the next generation network attached storage (NAS) solution, click link to OMV main page to learn more]
* DD image to microSD card or eMMC module. Highly recommend using [https://etcher.io/ Etcher]
* DD image to microSD card or eMMC module. Highly recommend using [https://etcher.io/ Etcher]
Line 173: Line 173:
*Forum thread concerning this release can be found [https://forum.pine64.org/showthread.php?tid=6309 here]
*Forum thread concerning this release can be found [https://forum.pine64.org/showthread.php?tid=6309 here]


=== Stretch OpenMediaVault OS Image arm64 for V3 and V2 board (Testing version) [microSD / eMMC Boot] [0.8.0rc14-1134] ===
=== Stretch OpenMediaVault OS Image armhf for V3 and V2 board (Testing version) [microSD / eMMC Boot] [0.8.0rc14-1134] ===
* [https://www.openmediavault.org/ openmediavault is the next generation network attached storage (NAS) solution, click link to OMV main page to learn more]
* [https://www.openmediavault.org/ openmediavault is the next generation network attached storage (NAS) solution, click link to OMV main page to learn more]
* DD image to microSD card or eMMC module. Highly recommend using [https://etcher.io/ Etcher]
* DD image to microSD card or eMMC module. Highly recommend using [https://etcher.io/ Etcher]

Revision as of 07:39, 13 June 2019

Linux Image Releases

Armbian

armbian.png

Armbian Debian Stretch Desktop [microSD / eMMC Boot] [5.75]

  • DD image to microSD card or eMMC module and boot. Highly recommend using Etcher
  • Login with
    • username: root
    • password: 1234
  • To find out more about Armbian and available options please visit their site

Armbian Ubuntu 18.04 Bionic Desktop [microSD / eMMC Boot] [5.88]

  • Version 5.88 onward support Rock64-v3 board
  • DD image to microSD card or eMMC module and boot. Highly recommend using Etcher
  • Login with
    • username: root
    • password: 1234
  • To find out more about Armbian and available options please visit their site

Armbian Ubuntu 18.04 Bionic Minimal [microSD / eMMC Boot] [5.88]

  • Version 5.88 onward support Rock64-v3 board
  • DD image to microSD card or eMMC module and boot. Highly recommend using Etcher
  • Login with
    • username: root
    • password: 1234
  • To find out more about Armbian and available options please visit their site

Debian Stretch

debian.png

Debian Stretch Minimal 64bit OS Image [microSD / eMMC Boot] [0.7.8]


Ubuntu 18.04 Bionic

penguin.png

Ubuntu 18.04 Bionic LXDE Desktop Image [microSD / eMMC Boot] [0.7.8]

Ubuntu 18.04 Bionic minimal 64bit Image [microSD / eMMC Boot] [0.7.8]

Ubuntu 18.04 Bionic minimal 32bit Image [microSD / eMMC Boot] [0.7.8]

Ubuntu 18.04 Bionic Containers Image (DockerCE & Kubernetes)[microSD / eMMC Boot] [0.7.8]

LibreELEC Nightly Build

libreelec.png

LibreElec KODI Community Build Image [microSD / eMMC boot] [NIGHTLY BUILD IMAGES]

OpenMediaVault

omv.png

Jessie OpenMediaVault Community Build Image [microSD to eMMC] [0.5.15-136] by ayufan

* There's a bug with eMMC in the "Stable" version of openmediavault linked from the wiki page. In order to use eMMC, please you need to be on the latest (pre-release) version which is linked here https://github.com/ayufan-rock64/linux-build/releases

Stretch OpenMediaVault OS Image armhf [microSD / eMMC Boot] [0.7.8]

Stretch OpenMediaVault OS Image arm64 [microSD / eMMC Boot] [0.7.8]

Stretch OpenMediaVault OS Image arm64 for V3 and V2 board (Testing version) [microSD / eMMC Boot] [0.8.0rc14-1134]

Stretch OpenMediaVault OS Image armhf for V3 and V2 board (Testing version) [microSD / eMMC Boot] [0.8.0rc14-1134]

NextCloudPi

nextcloudpi.png

NextCloudPi Community Build Image [microSD Boot] [11-04-18]

  • NextCloudPi comes not only with NextCloud preinstalled, but also with management tools for backups, SSL certificates, SAMBA, enhanced security and more.
  • Visit the project's website
  • You can follow the ongoing discussion about NextCloudPi on the PINE64 forum
  • DD image to microSD card and boot. Highly recommend using Etcher
  • Login with
    • username: root
    • password: 1234

Lakka

lakka.png

Lakka Community Build Image [microSD / eMMC Boot]

Slackware

slackware.png

Slackware Aarch64 Miniroot Community Build Image [microSD Boot] [20190201]

Slackware Aarch64 XFCE Community Build Image [microSD Boot] [20190201]

  • Login with
    • Username : root
    • Password : password
  • To run the OS on eMMC
    • Flash the image to micro SD, power up the board with micro SD and login
    • Copy the image file to micro SD by using SFTP. The image file must be in .img. note : root user are not allow transfer file to micro SD.
    • After finish copy the file, power off the board and add eMMC module to the board
    • Bootup the board, run below command for flashing to eMMC module
      • >>dd if=[image file] of=/dev/mmcblk1 bs=10M
        • example : dd if=slack-current-aarch64-xfce_08May18-4.4.126-rock64-build-20180508.img of=/dev/mmcblk1 bs=10M
      • then edit 2 files in eMMC module:
      • >> mount /dev/mmcblk1p1 /media
      • >> echo "rootdev=/dev/mmcblk1p1" >> /media/boot/uEnv.txt
      • >> sed -i 's:mmcblk0p1:mmcblk1p1:' /media/etc/fstab
    • After done, power off board and remove micro SD. Then bootup with only eMMC module.

DietPi

dietpi.png

DietPi Community Build Image [microSD / eMMC boot]

NEMS Linux

nems.jpg

  • NEMS stands for "Nagios Enterprise Monitoring Server" and it is a modern pre-configured, customized and ready-to-deploy Nagios Core image designed to run on low-cost micro computers.
  • To find out more about NEMS on the PINE64 and available tweaks to the installation please visit the PINE64 forum thread
  • Login with
    • Username: nemsadmin
    • Password: nemsadmin
  • Installation Guide
  • To find out more on NEM Linux, please visit their site

NEMS Linux [microSD / eMMC boot] [v1.5 - build 2]

Cent OS

centos.jpg

CentOS-7 Community Build Image [microSD Boot]

  • Centos-7.4.1708 with kernel from Armbian-5.69 (minimum build)
  • To find out more on installation process, please visit their Project31 site
  • Login with
    • username: root
    • password: centos

Debian by mrfixit2001

debian.png

Minimal Debian [microSD / eMMC Boot]


Debian Stretch Minimal 64bit OS Image for Rock64-V3 board [microSD / eMMC Boot] [20190509]

  • DD image to microSD card or eMMC module and boot. Highly recommend using Etcher
  • Login with
    • username: rock
    • password: rock

Manjaro ARM

manjaro.png

  • To learn more about Manjaro please visit Manjaro Forum
  • DD image to microSD card or eMMC module. Highly recommend using Etcher
  • Console and SSH default login:
    • username: manjaro
    • password: manjaro

Manjaro KDE ARM Community Build Image [microSD / eMMC Boot] [19.04]

Manjaro LXQT ARM Community Build Image [microSD / eMMC Boot] [19.04]

Manjaro ARM Minimal Community Build Image [microSD / eMMC Boot] [19.04]

Recalbox

recalbox.png

Recalbox Community Build Image [microSD / eMMC boot]


Volumio Digital Audio Player

volumio.png

  • Volumio is a linux-based headless DAP (digital audio player), which connects to your home stereo system or your DAC
  • Visit the project's website here
  • You can follow the ongoing discussion about Volumio on the PINE64 forum

Volumio Digital Audio Player Community Build Image [microSD Boot] [2.528-2019-01-12]

Volumio Digital Audio Player Community Build Image [microSD Boot] [2.462-2018-09-29]

Volumio Digital Audio Player Community Build Image [microSD Boot] [2.390-2018-03-27]

  • DD image (for 8GB micoSD card and above)
  • Login with
    • Username: volumio
    • Password: volumio
  • Volumio is controlled using a Web-GUI which can be accessed via a web browser using the boards IP or volumio.local/

Fedora

fedora.png

Fedora Minimal Community Build Image [microSD boot] [Preliminary Build]


Yocto

yocto.png

BSD Image Releases

NetBSD

Netbsd.png

  • To learn more about NetBSD please visit NetBSD main page
  • DD image to microSD card or eMMC module. Highly recommend using Etcher
    • [www.invisible.ca/arm/201807241220Z/NetBSD-evbarm-aarch64-201807241220Z-rock64.img.gz Download directly from NetBSD]
    • size: 336MB
  • Console and SSH default login:
    • username: root
    • password: [none]
  • Instructions concerning enabling SSH can be found here


OpenBSD

Openbsd.png

Android Image Releases

Android 8.x eMMC

android_8.png

Android 8.1. Stock Image [eMMC Boot] using DD method [20180606]

  • DD image to eMMC module. Highly recommend using Etcher
    • Shorting the eMMC PIN with a jumper as shown on the 1st image of Guide to install stock Android build to eMMC module. After power ON the box for 2-3 second, quickly remove the jumper, then it will start writing the new image to the eMMC. Please allow around 1 minute of boot up time before UI is presented via HDMI
  • Please allow 10-15 minutes boot up time on first time for initialization
  • Direct download from pine64.org
    • MD5 (XZ file): C05846B89A6483DA911CEA604627524F
    • File Size: 561MB

Android 8.1. Stock Image [eMMC Boot] using ROCKChip tools method [20180606]


Android 8.x

android_8.png

Android 8.1. Stock Image [microSD Boot] [20180623]

  • DD image to microSD card and boot. Highly recommend using Etcher
  • Please allow 10-15 minutes boot up time on first time for initialization
  • Direct download from pine64.org
    • MD5 (XZ file): 85372A568C114ADE7CD9632CEBA193E9
    • File Size: 575MB


Android 7.x eMMC

android_7.png

Android 7.1.2 Stock Image [microSD to eMMC] [Rooted] [20171204]

  • DD image to microSD card. Highly recommend using Etcher
    • Shorting the eMMC PIN with a jumper as shown on the 1st image of Guide to install stock Android build to eMMC module. After power ON the box for 2-3 second, quickly remove the jumper, then it will start writing the new image to the eMMC. Please allow around 1 minute of boot up time before UI is presented via HDMI
  • Please allow 10-15 minutes boot up time on first time for initialization
  • USB 3.0 patches
  • Enable Real Time Clock support for Popcorn Hour Transformer
  • Direct download from pine64.org
    • MD5 (XZ file): 43443467DFCAEDE767556843EB4D6707
    • File Size: 558MB
  • Set MacAddress on ROCK64

Android 7.1.2 Stock Image [eMMC Boot] [Rooted] [20171204]


Android 7.x

android_7.png

Android 7.1.2 Stock Image [microSD Boot] [Rooted] [20171204]

  • DD image to microSD card and boot. Highly recommend using Etcher
  • Please allow 10-15 minutes boot up time on first time for initialization
  • USB 3.0 patches
  • Enable Real Time Clock support for Popcorn Hour Transformer
  • Direct download from pine64.org
    • MD5 (XZ file): 56520ED3DB6E587DA140AD314A055EB2
    • File Size: 544MB


Android TV 7.x eMMC

android_7.png

Android TV 7.1 Community Build Image [microSD to eMMC] [v0.3.4-r86] by ayufan

Android TV 7.1 Community Build Image [eMMC] by ayufan


Android TV 7.x

android_7.png

Android TV 7.1 Community Build Image [microSD Boot] by ayufan


Android SDK

Android P SDK [v9.0]