Difference between revisions of "Project Don't be evil"

From PINE64
Jump to navigation Jump to search
m (uploaded and embedded logos -- Software entries should probably point to phone software page now?)
 
(38 intermediate revisions by 10 users not shown)
Line 7: Line 7:
 
* Lastly, the third phase which is the PinePhone itself - scheduled to be prototype released in Q3 2019 and BTO batch released with mobile OS parents in Q4 2019 (pending on software development).
 
* Lastly, the third phase which is the PinePhone itself - scheduled to be prototype released in Q3 2019 and BTO batch released with mobile OS parents in Q4 2019 (pending on software development).
  
[[Image:Qee3ovj.jpg|500px|Image: 500 pixels]]
+
[[Image:Qee3ovj.jpg|200px]]
[[Image:Qsud2Gt.jpg|500px|Image: 500 pixels]]
+
[[Image:Qsud2Gt.jpg|200px]]
 
+
[[Image:Martijnpocket.jpg|200px]]
  
 
= Project Don't be evil, Baseboard and SOPine Module Information, and Schematics =
 
= Project Don't be evil, Baseboard and SOPine Module Information, and Schematics =
Line 15: Line 15:
 
* Input Power: DC 5V @ 2A, 3.7V Li-Ion battery connector, USB type-C connector
 
* Input Power: DC 5V @ 2A, 3.7V Li-Ion battery connector, USB type-C connector
 
* Baseboard Schematic:
 
* Baseboard Schematic:
** [http://files.pine64.org/doc/PinePhone/Pinephone-devkit-SCH%20Ver%201.1.pdf "Don't Be Evil" PinePhone Dev kit Baseboard Schematic]
+
** [https://files.pine64.org/doc/PinePhone/Pinephone-devkit%20Board%20Structure.pdf "Don't Be Evil" PinePhone Dev kit Baseboard Structure]
** [http://files.pine64.org/doc/PinePhone/Pinephone-devkit%20Board%20Structure.pdf "Don't Be Evil" PinePhone Dev kit Baseboard Structure]
+
** [https://files.pine64.org/doc/PinePhone/Pinephone-devkit-SCH%20Ver%201.1.pdf "Don't Be Evil" PinePhone Dev kit Baseboard Ver 1.1 Schematic]
 +
** [https://files.pine64.org/doc/PinePhone/Pinephone%20Dev%20Kit%20Ver%201.1_PCB.pdf "Don't Be Evil" PinePhone Dev kit Baseboard Ver 1.1 PCB Artwork]
 +
** [https://files.pine64.org/doc/PinePhone/Pinephone-devkit-SCH%20Ver%201.2.pdf "Don't Be Evil" PinePhone Dev kit Baseboard Ver 1.2 Schematic]
 +
** [https://files.pine64.org/doc/PinePhone/Pinephone%20Dev%20Kit%20Ver%201.2_PCB.pdf "Don't Be Evil" PinePhone Dev kit Baseboard Ver 1.2 PCB Artwork]
 
* SOPine Module Schematic:
 
* SOPine Module Schematic:
** [http://files.pine64.org/doc/SOPINE-A64/SOPINE-A64-Schematic-ver-0.9.pdf SOPine Module Schematic]
+
** [https://files.pine64.org/doc/SOPINE-A64/SOPINE-A64-Schematic-ver-0.9.pdf SOPine Module Schematic]
** [http://files.pine64.org/doc/SOPINE-A64/SOPINE-A64-Pin-Assignments-ver-1.0.pdf SOPine Module Pin Assignment ver 1.0]
+
** [https://files.pine64.org/doc/SOPINE-A64/SOPINE-A64-Pin-Assignments-ver-1.0.pdf SOPine Module Pin Assignment ver 1.0]
 
* Wifi/BT module information:
 
* Wifi/BT module information:
** [http://files.pine64.org/doc/Pine%20A64%20Schematic/A64-DB-WIFI-BT-REV%20B.pdf PINE A64 Wifi/BT Module Schematic]
+
** [https://files.pine64.org/doc/Pine%20A64%20Schematic/A64-DB-WIFI-BT-REV%20B.pdf PINE A64 Wifi/BT Module Schematic]
* [http://files.pine64.org/doc/Pine%20A64%20Schematic/Pine%20A64%20Pin%20Assignment%20160119.pdf PINE A64 Pi-2/Eular/Ext Bus/Wifi Bus Connector Pin Assignment (Updated 15/Feb/2016)]
+
* [https://files.pine64.org/doc/Pine%20A64%20Schematic/Pine%20A64%20Pin%20Assignment%20160119.pdf PINE A64 Pi-2/Eular/Ext Bus/Wifi Bus Connector Pin Assignment (Updated 15/Feb/2016)]
  
  
Line 28: Line 31:
 
* Based on Allwinner A64/R18
 
* Based on Allwinner A64/R18
 
** '''R18 and A64 are identical SoC but R18 committed for 10 years supply by vendor.'''  
 
** '''R18 and A64 are identical SoC but R18 committed for 10 years supply by vendor.'''  
[[File:Allwinner_A64.jpg]] [[File:Allwinner_R18.png]]
+
<div style=float:right>[[File:Allwinner_A64.jpg]] [[File:Allwinner_R18.png]]</div>
  
 
== CPU Architecture ==
 
== CPU Architecture ==
* [http://www.arm.com/products/processors/cortex-a/cortex-a53-processor.php Quad-core ARM Cortex-A53 Processor@1152Mhz]
+
* [https://www.arm.com/products/processors/cortex-a/cortex-a53-processor.php Quad-core ARM Cortex-A53 Processor@1152Mhz]
 
* A power-efficient ARM v8 architecture
 
* A power-efficient ARM v8 architecture
 
* 64 and 32bit execution states for scalable high performance
 
* 64 and 32bit execution states for scalable high performance
Line 41: Line 44:
  
 
== GPU Architecture ==
 
== GPU Architecture ==
* [http://www.arm.com/products/multimedia/mali-gpu/ultra-low-power/mali-400.php ARM Mali400MP2 Dual-core GPU]
+
* [https://www.arm.com/products/multimedia/mali-gpu/ultra-low-power/mali-400.php ARM Mali400MP2 Dual-core GPU]
 
* Support OpenGL ES 2.0 and OpenVG 1.1 standard
 
* Support OpenGL ES 2.0 and OpenVG 1.1 standard
  
Line 52: Line 55:
 
* Allwinner A64/R18 SoC information:
 
* Allwinner A64/R18 SoC information:
 
** '''R18 and A64 are identical SoC but R18 committed for 10 years supply by vendor.'''  
 
** '''R18 and A64 are identical SoC but R18 committed for 10 years supply by vendor.'''  
** [http://files.pine64.org/doc/datasheet/pine64/A64%20brief%20v1.0%2020150323.pdf Allwinner A64 SoC Brief Introduction]
+
** [https://files.pine64.org/doc/datasheet/pine64/A64%20brief%20v1.0%2020150323.pdf Allwinner A64 SoC Brief Introduction]
** [http://files.pine64.org/doc/datasheet/pine64/Allwinner-R18-Brief%20Sheet.pdf Allwinner R18 SoC Brief Introduction]
+
** [https://files.pine64.org/doc/datasheet/pine64/Allwinner-R18-Brief%20Sheet.pdf Allwinner R18 SoC Brief Introduction]
** [http://files.pine64.org/doc/datasheet/pine64/A64_Datasheet_V1.1.pdf Allwinner A64/R18 SoC Data Sheet V1.1 (Official Released Version)]
+
** [https://files.pine64.org/doc/datasheet/pine64/A64_Datasheet_V1.1.pdf Allwinner A64/R18 SoC Data Sheet V1.1 (Official Released Version)]
** [http://files.pine64.org/doc/datasheet/pine64/Allwinner_A64_User_Manual_V1.0.pdf Allwinner A64/R18 SoC User Manual V1.0 (Official Release Version)]
+
** [https://files.pine64.org/doc/datasheet/pine64/Allwinner_A64_User_Manual_V1.0.pdf Allwinner A64/R18 SoC User Manual V1.0 (Official Release Version)]
 
* X-Powers AXP803 PMU (Power Management Unit) information:
 
* X-Powers AXP803 PMU (Power Management Unit) information:
** [http://files.pine64.org/doc/datasheet/pine64/AXP803_Datasheet_V1.0.pdf AXP803 PMIC Datasheet]
+
** [https://files.pine64.org/doc/datasheet/pine64/AXP803_Datasheet_V1.0.pdf AXP803 PMIC Datasheet]
 
* LPDDR3 information:
 
* LPDDR3 information:
** [http://files.pine64.org/doc/datasheet/pine64/AWL3A1632_mobile_lpddr3_1600Mbps.pdf Allwinner LPDDR3 Datasheet]
+
** [https://files.pine64.org/doc/datasheet/pine64/AWL3A1632_mobile_lpddr3_1600Mbps.pdf Allwinner LPDDR3 Datasheet]
** [http://files.pine64.org/doc/datasheet/pine64/FORESEE%20178ball%2012x11.5%20LPDDR3%2016G%20Spec%20V1.0-1228.pdf Foresee LPDDR3 Datasheet]
+
** [https://files.pine64.org/doc/datasheet/pine64/FORESEE%20178ball%2012x11.5%20LPDDR3%2016G%20Spec%20V1.0-1228.pdf Foresee LPDDR3 Datasheet]
** [http://files.pine64.org/doc/datasheet/pine64/K4E6E304EE-EGCE.pdf Samsung LPDDR3 Datasheet]
+
** [https://files.pine64.org/doc/datasheet/pine64/K4E6E304EE-EGCE.pdf Samsung LPDDR3 Datasheet]
** [http://files.pine64.org/doc/datasheet/pine64/LPDDR3%20178ball%208Gb_H9CCNNN8JTALAR_Rev1.0.pdf Hynix LPDDR3 Datasheet]
+
** [https://files.pine64.org/doc/datasheet/pine64/LPDDR3%20178ball%208Gb_H9CCNNN8JTALAR_Rev1.0.pdf Hynix LPDDR3 Datasheet]
 
* eMMC information:
 
* eMMC information:
** [http://files.pine64.org/doc/rock64/PINE64_eMMC_Module_20170719.pdf PINE64 eMMC module schematic]
+
** [https://files.pine64.org/doc/rock64/PINE64_eMMC_Module_20170719.pdf PINE64 eMMC module schematic]
** [http://files.pine64.org/doc/rock64/usb%20emmc%20module%20adapter%20v2.pdf PINE64 USB adapter for eMMC module V2 schematic]
+
** [https://files.pine64.org/doc/rock64/usb%20emmc%20module%20adapter%20v2.pdf PINE64 USB adapter for eMMC module V2 schematic]
** [http://files.pine64.org/doc/rock64/USB%20adapter%20for%20eMMC%20module%20PCB.tar PINE64 USB adapter for eMMC module PCB in JPEG]
+
** [https://files.pine64.org/doc/rock64/USB%20adapter%20for%20eMMC%20module%20PCB.tar PINE64 USB adapter for eMMC module PCB in JPEG]
** [http://files.pine64.org/doc/datasheet/pine64/SDINADF4-16-128GB-H%20data%20sheet%20v1.13.pdf SanDisk eMMC Datasheet]
+
** [https://files.pine64.org/doc/datasheet/pine64/SDINADF4-16-128GB-H%20data%20sheet%20v1.13.pdf SanDisk eMMC Datasheet]
** [http://files.pine64.org/doc/datasheet/pine64/H26M64003DQR%20Datasheet.pdf Hynix eMMC Datasheet]
+
** [https://files.pine64.org/doc/datasheet/pine64/H26M64003DQR%20Datasheet.pdf Hynix eMMC Datasheet]
** [http://files.pine64.org/doc/datasheet/pine64/FORESEE_eMMC_NCEMBSF9-xxG%20SPEC%20A0%2020150730.pdf Foresee eMMC Datasheet]
+
** [https://files.pine64.org/doc/datasheet/pine64/FORESEE_eMMC_NCEMBSF9-xxG%20SPEC%20A0%2020150730.pdf Foresee eMMC Datasheet]
 
* SPI NOR Flash information:
 
* SPI NOR Flash information:
** [http://files.pine64.org/doc/datasheet/pine64/w25q128jv%20spi%20revc%2011162016.pdf WinBond 128Mb SPI Flash Datasheet]
+
** [https://files.pine64.org/doc/datasheet/pine64/w25q128jv%20spi%20revc%2011162016.pdf WinBond 128Mb SPI Flash Datasheet]
** [http://files.pine64.org/doc/datasheet/pine64/GD25Q128C-Rev2.5.pdf GigaDevice 128Mb SPI Flash Datasheet]
+
** [https://files.pine64.org/doc/datasheet/pine64/GD25Q128C-Rev2.5.pdf GigaDevice 128Mb SPI Flash Datasheet]
 
* '''Project Don't be evil module/component related information:'''
 
* '''Project Don't be evil module/component related information:'''
 
** 2MPixel front CMOS Camera module information:
 
** 2MPixel front CMOS Camera module information:
*** [http://files.pine64.org/doc/datasheet/pinephone/GC20355Mp-module_for_pinephone_devkit.pdf 2MP CMOS Image Sensor Module Drawing]
+
*** [https://files.pine64.org/doc/datasheet/pinephone/GC20355Mp-module_for_pinephone_devkit.pdf 2MP CMOS Image Sensor Module Drawing]
*** [http://files.pine64.org/doc/datasheet/pinephone/GC2035%20Product%20Brief.pdf GalaxyCore GC2035 2MP CMOS Image Sensor Product Brief]
+
*** [https://files.pine64.org/doc/datasheet/pinephone/GC2035%20Product%20Brief.pdf GalaxyCore GC2035 2MP CMOS Image Sensor Product Brief]
*** [http://files.pine64.org/doc/datasheet/pinephone/GC2035%20DataSheet.pdf GalaxyCore GC2035 2MP CMOS Image Sensor Datasheet]
+
*** [https://files.pine64.org/doc/datasheet/pinephone/GC2035%20DataSheet.pdf GalaxyCore GC2035 2MP CMOS Image Sensor Datasheet]
 
** 5MPixel Rear CMOS Camera module information:
 
** 5MPixel Rear CMOS Camera module information:
*** [http://files.pine64.org/doc/datasheet/pinephone/ATK-OV5640-5Mp-module_for_pinephone_devkit.pdf 5MP CMOS Image Sensor Module Drawing]
+
*** [https://files.pine64.org/doc/datasheet/pinephone/ATK-OV5640-5Mp-module_for_pinephone_devkit.pdf 5MP CMOS Image Sensor Module Drawing]
*** [http://files.pine64.org/doc/datasheet/pinephone/OV5640_datasheet.pdf OmniVision OV5460 5MP CMOS Image Sensor Datasheet]
+
*** [https://files.pine64.org/doc/datasheet/pinephone/OV5640_datasheet.pdf OmniVision OV5640 5MP CMOS Image Sensor Datasheet]
 +
*** [https://www.arducam.com/downloads/modules/OV5640/OV5640_Software_app_note_parallel.pdf OmniVision OV5640 5MP CMOS Image Sensor Software Application Note]
 
** LCD Touch Screen Panel information:
 
** LCD Touch Screen Panel information:
*** [http://files.pine64.org/doc/datasheet/pinephone/XBD572-IPS-HI010A%20SPEC.pdf 5.7" 1440x720 IPS LCD Panel Specification]
+
*** [https://files.pine64.org/doc/datasheet/pinephone/XBD572-IPS-HI010A%20SPEC.pdf 5.7" 1440x720 IPS LCD Panel Specification]
*** [http://files.pine64.org/doc/datasheet/pinephone/JD9365D_DS_Preliminary_V0.01_20170427.pdf fiti JD9365D LCD Controller Datasheet]
+
*** [https://files.pine64.org/doc/datasheet/pinephone/JD9365D_DS_Preliminary_V0.01_20170427.pdf fiti JD9365D LCD Controller Datasheet]
**** [http://files.pine64.org/doc/datasheet/pinephone/jd9365_hd720m_dsi_vdo_ivo570.rar fiti JD9365D LCD Controller Driver Source Code]
+
*** [https://files.pine64.org/doc/datasheet/pinephone/XBD572-IPS-HI010A%20SPEC.pdf 5.7" Front Panel Touch Screen Specification]
*** [http://files.pine64.org/doc/datasheet/pinephone/XBD572-IPS-HI010A%20SPEC.pdf 5.7" Front Panel Touch Screen Specification]
+
*** [https://files.pine64.org/doc/datasheet/pinephone/FT6336GU_Upgrade_Spec_Ver1.0.pdf FocalTech FT6336GU Front Panel Touch Screen Specification]
*** [http://files.pine64.org/doc/datasheet/pinephone/FT6336GU_Upgrade_Spec_Ver1.0.pdf FocalTech FT6336GU Front Panel Touch Screen Specification]
 
**** [http://files.pine64.org/doc/datasheet/pinephone/focaltech.rar FocalTech FT6336GU Driver Source Code]
 
 
** Lithium Battery information:
 
** Lithium Battery information:
*** [http://files.pine64.org/doc/datasheet/pinephone/ncr18650b.pdf Panasonic NCR18650B 3350mAH Lithium Ion Battery Specification]
+
*** [https://files.pine64.org/doc/datasheet/pinephone/ncr18650b.pdf Panasonic NCR18650B 3350mAH Lithium Ion Battery Specification]
 
** Ethernet PHY information:
 
** Ethernet PHY information:
*** [http://files.pine64.org/doc/datasheet/pine64/rtl8211e(g)-vb(vl)-cg_datasheet_1.6.pdf Realtek RTL8211 10/100/1000M Ethernet Transceiver]
+
*** [https://files.pine64.org/doc/datasheet/pine64/rtl8211e(g)-vb(vl)-cg_datasheet_1.6.pdf Realtek RTL8211 10/100/1000M Ethernet Transceiver]
 
** Wifi/BT module information:
 
** Wifi/BT module information:
*** [http://files.pine64.org/doc/datasheet/pine64/RTL8723BS.pdf Realtek RTL8723BS WiFi with BT SDIO]
+
*** [https://files.pine64.org/doc/datasheet/pine64/RTL8723BS.pdf Realtek RTL8723BS WiFi with BT SDIO]
 
** LTE module information:
 
** LTE module information:
*** [http://files.pine64.org/doc/datasheet/project_anakin/LTE_module/Quectel_EC25_LTE_Specification_V1.4.pdf Quectel EC25 LTE Module Specification]
+
*** [https://files.pine64.org/doc/datasheet/project_anakin/LTE_module/Quectel_EC25_LTE_Specification_V1.4.pdf Quectel EC25 LTE Module Specification]
*** [http://files.pine64.org/doc/datasheet/project_anakin/LTE_module/Quectel_EG25-G_LTE_Specification_V1.1_Preliminary_20180522%20(002).pdf Quectel EG25-G LTE Module Specification]
+
*** [https://files.pine64.org/doc/datasheet/project_anakin/LTE_module/Quectel_EG25-G_LTE_Specification_V1.1_Preliminary_20180522%20(002).pdf Quectel EG25-G LTE Module Specification]
*** [http://files.pine64.org/doc/datasheet/project_anakin/LTE_module/Quectel_EC25&EC21_QuecCell_AT_Commands_Manual_V1.1.pdf Quectel EC25 LTE Module AT Cammands Set Manual]
+
*** [https://files.pine64.org/doc/datasheet/project_anakin/LTE_module/Quectel_EC25&EC21_QuecCell_AT_Commands_Manual_V1.1.pdf Quectel EC25 LTE Module AT Cammands Set Manual]
*** [http://files.pine64.org/doc/datasheet/project_anakin/LTE_module/Quectel_EC25_Hardware_Design_V1.3.pdf Quectel EC25 LTE Module Hardware Design Guide]
+
*** [https://files.pine64.org/doc/datasheet/project_anakin/LTE_module/Quectel_EC25_Hardware_Design_V1.3.pdf Quectel EC25 LTE Module Hardware Design Guide]
*** [http://files.pine64.org/doc/datasheet/project_anakin/LTE_module/Quectel_EC25_Reference_Design_Rev.D_20161111.pdf Quectel EC25 LTE Module Reference Design Guide]
+
*** [https://files.pine64.org/doc/datasheet/project_anakin/LTE_module/Quectel_EC25_Reference_Design_Rev.D_20161111.pdf Quectel EC25 LTE Module Reference Design Guide]
 
+
** Sensors:
 +
*** [https://www.st.com/en/mems-and-sensors/lis3mdl.html ST LIS3MDL 3-axis Magnetomater Datasheet]
 +
*** [https://www.invensense.com/products/motion-tracking/6-axis/mpu-6050/ InvenSense MPU-6050 Six-Axis (Gyro + Accelerometer) MEMS Datasheet]
 +
*** [https://www.sensortek.com.tw/en/product/Proximity_Sensor_with_ALS.html SensorTek STK3335 Ambient Light Sensor and Proximity Sensor]
  
  
You can also flash an OS image manually; please follow the instructions below.
 
  
 
= Software and OS Image Downloads =
 
= Software and OS Image Downloads =
  
 
+
== Postmarket OS Early Alpha test build [microSD Boot] ==
http://files.pine64.org/sw/pine64_installer/json/ubports.png
+
<div style=float:right>[[File:postmarketos.png|right|100px]]</div>
 +
* Suitable for PinePhone "Don't Be Evil" Dev Kit version 1.1 and version 1.2
 +
* There are two type of LCD panels. For long touch screen cable, please use the build with inverted wording.
 +
* DD image (for 8GB microSD card and above)
 +
** [https://images.postmarketos.org/pinephone/ Direct download from postmarketOS image site]
 +
** [https://wiki.postmarketos.org/wiki/Pine_Don%27t_be_evil_devkit_(pine-dontbeevil) postmarketOS PinePhone "Don't Be Evil" dev kit wiki site]
  
 
== UBPorts mainline build ==
 
== UBPorts mainline build ==
* Not Yet Ready *
+
<div style=float:right>[[File:ubports.png|right|100px]]</div>
 +
* [https://ci.ubports.com/job/rootfs-pinephone/ UBPorts Jenkins for PinePhone]
  
 
+
The link above seems to be broken, if so try this:
http://files.pine64.org/sw/pine64_installer/json/plasma_mobile.png
+
[https://ci.ubports.com/job/rootfs/job/rootfs-pinephone/ Jenkins Project rootfs-pinephone]
  
 
== KDE Plasma Mobile build ==
 
== KDE Plasma Mobile build ==
 +
<div style=float:right>[[File:plasma_mobile.png|right|100px]]</div>
 
* Not Yet Ready *
 
* Not Yet Ready *
  
 +
== Sailfish OS build ==
 +
<div style=float:right>[[File:sailfishos.png|right|100px]]</div>
 +
The Sailfish OS image is build on Gitlab CI, the latest image can be installed using our [https://raw.githubusercontent.com/sailfish-on-dontbeevil/flash-it/master/flash-it.sh flashing script] written in Bash.
  
 +
The script downloads the image and bootloader from our CI, extracts everything and burns it onto the SD card.
  
http://files.pine64.org/sw/pine64_installer/json/postmarketos.png
+
'''Instructions:'''
  
== Postmarket OS build ==
+
1. Download the flashing script
* Not Yet Ready *
 
  
 +
2. Insert a microSD card in your device
  
http://files.pine64.org/sw/pine64_installer/json/sailfishos.png
+
3. Make the script executable: <code>chmod +x flash-it.sh</code>
 
 
== Sailfish OS build ==
 
* Not Yet Ready *
 
  
 +
4. Execute it: <code>./flash-it.sh</code>
  
http://files.pine64.org/sw/pine64_installer/json/maemo_leste.png
+
5. Follow the instructions. Some commands in the script require root permissions (for example: mounting and flashing the SD card).
  
== Maemo OS build ==
+
'''Note''': The script will format and flash the SD card, make sure that you don't have any important data on the SD card!
* Not Yet Ready *
 
  
  
http://files.pine64.org/sw/pine64_installer/json/nixos.png
+
== Maemo Leste build ==
 +
<div style=float:right>[[File:maemo_leste.png|right|100px]]</div>
 +
* Works on dev kit versions 1.1 and 1.2
 +
* DD image to a micro SD (8GB+) or eMMC
 +
** [https://maedevu.maemo.org/images/pinephone-dontbeevil/ Maemo Leste test builds download]
  
 
== NixOS build ==
 
== NixOS build ==
 +
<div style=float:right>[[File:nixos.png|right|100px]]</div>
 
* Not Yet Ready *
 
* Not Yet Ready *
  
 +
== LuneOS build ==
 +
<div style=float:right>[[File:luneos.jpg|right|100px]]</div>
 +
* [https://build.webos-ports.org/luneos-testing/images/pinephone/ LuneOS test image for PinePhone and thanks to Tofe]
 +
* Tofe recommends using bmaptool ; for example "bmaptool copy https://build.webos-ports.org/luneos-testing/images/pinephone/luneos-dev-image-pinephone-testing-0-15.rootfs.wic.gz /dev/mmcblk0"
 +
 +
== Nemo Mobile build ==
 +
<div style=float:right>[[File:nemo_mobile.png|right|100px]]</div>
 +
* Not Yet Ready *
  
 
= Mali-400 64-bit Driver =
 
= Mali-400 64-bit Driver =
Line 152: Line 177:
  
 
== Quick Links to Build Sources of OS Images ==
 
== Quick Links to Build Sources of OS Images ==
 
 
* [https://linux-sunxi.org/Linux_mainlining_effort#Status_Matrix A64 mainline status matrix chart]
 
* [https://linux-sunxi.org/Linux_mainlining_effort#Status_Matrix A64 mainline status matrix chart]
  
Line 163: Line 187:
 
* [https://github.com/ayufan-pine64/linux-build/releases/latest/ ayufan Linux]
 
* [https://github.com/ayufan-pine64/linux-build/releases/latest/ ayufan Linux]
  
 +
= Errata for ver1.1 and ver1.2 board =
 +
 +
'''1. Please DON'T insert micro SIM card to dev kit board micro SIM card slot, the SIM data, VPP, and GND signal have been misplaced. A miciPCIe adapter with sim card holder 9shown as below photo) will be provide to developers to correct this mistake.'''
 +
 +
[[File:MiniPCIe_with_sim_slot_adapter.png|200px]]
  
  
 +
'''2. The PinePhone dev kit doesn't charge due to VBUS on SOPine module is not connected. Please connect R9688 solder pads with 0 ohm resistor or using thin wire bridge up the solder pads. Location shows as below:'''
 +
 +
[[File:PinePhone_VBUS_charging_small.png|200px]]
 +
 +
 +
'''3. The SOPINE's SPI NOR flash storage and the devkit's camera flash (heh) share the same GPIO pins. The flash storage may not be used.'''
 +
 +
[[File:SOPINE-SPI-Flash.png|200px]] [[File:Pinephone-1.1-flash-schematic.png|200px]]
 +
 +
 +
'''4. On the camera flash GPIO conflict, the new assignment of GPIO PB3 pin for SGM3140 FLASH_EN and GPIP PD7 for FLASH_TRIGOUT. Please note that PD7 is also LCD_ID pin which may not be used.'''
 +
 +
[[File:GPIO_PB3_location.jpg|200px]]
 +
GPIO PB3 location
 +
 +
[[File:U54_SGM3140_FLASH_EN pin location.jpg|200px]]
 +
U54 SGM3140 FLASH_EN pin location
 +
 +
[[File:Flash_GPIO_Reassigned.jpg|200px]]
 +
Flash GPIOs Reassigned wiring
  
 
= Other Resources =
 
= Other Resources =
* [http://linux-sunxi.org/Pine64#Manufacturer_images Linux Sunxi Wiki page on PINE A64]
+
* [https://linux-sunxi.org/Pine64#Manufacturer_images Linux Sunxi Wiki page on PINE A64]
 
* [https://github.com/apritzel/pine64 Linux Image created by Andre Przywara]
 
* [https://github.com/apritzel/pine64 Linux Image created by Andre Przywara]
 
* [https://github.com/longsleep/build-pine64-image PINE64 Linux build scripts, tools and instructions by Longsleep]
 
* [https://github.com/longsleep/build-pine64-image PINE64 Linux build scripts, tools and instructions by Longsleep]
 
* [https://www.stdin.xyz/downloads/people/longsleep/pine64-images/ PINE64 Linux image by Longsleep]
 
* [https://www.stdin.xyz/downloads/people/longsleep/pine64-images/ PINE64 Linux image by Longsleep]
* [http://softwarebakery.com/shrinking-images-on-linux Shrinking images on Linux by FrozenCow]
+
* [https://softwarebakery.com/shrinking-images-on-linux Shrinking images on Linux by FrozenCow]
 
* [https://osmocom.org/projects/quectel-modems/wiki/EC25/24 Quectel EC-25 LTE module open source information]
 
* [https://osmocom.org/projects/quectel-modems/wiki/EC25/24 Quectel EC-25 LTE module open source information]
 +
 +
[[Category:PinePhone]] [[Category:Allwinner A64]]

Latest revision as of 19:35, 13 June 2021

The Project "Don't be evil" - Phase 2 of PINE64 Smartphone "PinePhone" Development Kit

Project Don't be evil is an actual smartphone developer kit for the PINE64 Smartphone dubbed "PinePhone". It is used in the early stages of development as a starting point for affiliated projects. PinePhone development has been broken down into three distinct phases:

  • First phase - Project Anakin
  • Second phase - purpose-built development kit code named "Don't be evil" and introduced at FOSDEM 2019
  • Lastly, the third phase which is the PinePhone itself - scheduled to be prototype released in Q3 2019 and BTO batch released with mobile OS parents in Q4 2019 (pending on software development).

Qee3ovj.jpg Qsud2Gt.jpg Martijnpocket.jpg

Project Don't be evil, Baseboard and SOPine Module Information, and Schematics


SoC and Memory Specification

  • Based on Allwinner A64/R18
    • R18 and A64 are identical SoC but R18 committed for 10 years supply by vendor.
Allwinner A64.jpg Allwinner R18.png

CPU Architecture

  • Quad-core ARM Cortex-A53 Processor@1152Mhz
  • A power-efficient ARM v8 architecture
  • 64 and 32bit execution states for scalable high performance
  • Support NEON Advanced SIMD (Single Instruction Multiple Data) instruction for acceleration of media and signal processing function
  • Support Large Physical Address Extensions(LPAE)
  • VFPv4 Floating Point Unit
  • 32KB L1 Instruction cache and 32KB L1 Data cache
  • 512KB L2 cache

GPU Architecture

System Memory

  • RAM Memory Variants: 2GB LPDDR3.
  • Storage Memory: SPI Flash and optional eMMC module from 16GB up to 64GB


Datasheets for Components and Peripherals


Software and OS Image Downloads

Postmarket OS Early Alpha test build [microSD Boot]

Postmarketos.png

UBPorts mainline build

Ubports.png

The link above seems to be broken, if so try this: Jenkins Project rootfs-pinephone

KDE Plasma Mobile build

Plasma mobile.png
  • Not Yet Ready *

Sailfish OS build

Sailfishos.png

The Sailfish OS image is build on Gitlab CI, the latest image can be installed using our flashing script written in Bash.

The script downloads the image and bootloader from our CI, extracts everything and burns it onto the SD card.

Instructions:

1. Download the flashing script

2. Insert a microSD card in your device

3. Make the script executable: chmod +x flash-it.sh

4. Execute it: ./flash-it.sh

5. Follow the instructions. Some commands in the script require root permissions (for example: mounting and flashing the SD card).

Note: The script will format and flash the SD card, make sure that you don't have any important data on the SD card!


Maemo Leste build

Maemo leste.png

NixOS build

Nixos.png
  • Not Yet Ready *

LuneOS build

Luneos.jpg

Nemo Mobile build

Nemo mobile.png
  • Not Yet Ready *

Mali-400 64-bit Driver

Mali-400 64-bit Driver [20171220]


Quick Links to Build Sources of OS Images

Some these OS images labelled as beta or nightly builds which means they are only fit for testing purposes

These images should be used at your own risk and are not fit for normal use

Errata for ver1.1 and ver1.2 board

1. Please DON'T insert micro SIM card to dev kit board micro SIM card slot, the SIM data, VPP, and GND signal have been misplaced. A miciPCIe adapter with sim card holder 9shown as below photo) will be provide to developers to correct this mistake.

MiniPCIe with sim slot adapter.png


2. The PinePhone dev kit doesn't charge due to VBUS on SOPine module is not connected. Please connect R9688 solder pads with 0 ohm resistor or using thin wire bridge up the solder pads. Location shows as below:

PinePhone VBUS charging small.png


3. The SOPINE's SPI NOR flash storage and the devkit's camera flash (heh) share the same GPIO pins. The flash storage may not be used.

SOPINE-SPI-Flash.png Pinephone-1.1-flash-schematic.png


4. On the camera flash GPIO conflict, the new assignment of GPIO PB3 pin for SGM3140 FLASH_EN and GPIP PD7 for FLASH_TRIGOUT. Please note that PD7 is also LCD_ID pin which may not be used.

GPIO PB3 location.jpg GPIO PB3 location

U54 SGM3140 FLASH EN pin location.jpg U54 SGM3140 FLASH_EN pin location

Flash GPIO Reassigned.jpg Flash GPIOs Reassigned wiring

Other Resources