Difference between revisions of "Project Anakin"

From PINE64
Jump to navigation Jump to search
Line 138: Line 138:
 
*** [http://files.pine64.org/doc/datasheet/pine64/0.5FPC%20Front%20Open%20Connector%20H=1.5.pdf 0.5mm Pitch cover type FPC connector specification use in DSI port, TP port and CSI port]
 
*** [http://files.pine64.org/doc/datasheet/pine64/0.5FPC%20Front%20Open%20Connector%20H=1.5.pdf 0.5mm Pitch cover type FPC connector specification use in DSI port, TP port and CSI port]
 
** LTE module information:
 
** LTE module information:
** Note: The current Project Anakin kit deploy on using Quectel EC20_R2.1 which belong to EC25 family. Actually production will use EC25 and EG25 module pending on region.
+
*** Note: The current Project Anakin kit deploy on using Quectel EC20_R2.1 which belong to EC25 family. Actually production will use EC25 and EG25-G (still preliminary) module pending on region.
 
*** [http://files.pine64.org/doc/datasheet/project_anakin/LTE_module/Quectel_EC20_R2.1_LTE_Specification_V1.1.pdf Quectel EC20 R2.1 LTE Module Specification]
 
*** [http://files.pine64.org/doc/datasheet/project_anakin/LTE_module/Quectel_EC20_R2.1_LTE_Specification_V1.1.pdf Quectel EC20 R2.1 LTE Module Specification]
 +
*** [http://files.pine64.org/doc/datasheet/project_anakin/LTE_module/Quectel_EC25_LTE_Specification_V1.4.pdf Quectel EC25 LTE Module Specification]
 +
*** [http://files.pine64.org/doc/datasheet/project_anakin/LTE_module/Quectel_EG25-G_LTE_Specification_V1.1_Preliminary_20180522%20(002).pdf Quectel EG25-G LTE Module Specification]
 +
*** [http://files.pine64.org/doc/datasheet/project_anakin/LTE_module/Quectel_EC25&EC21_QuecCell_AT_Commands_Manual_V1.1.pdf Quectel EC25 LTE Module AT Cammands Set Manual]
 +
*** [http://files.pine64.org/doc/datasheet/project_anakin/LTE_module/Quectel_EC25_Hardware_Design_V1.3.pdf Quectel EC25 LTE Module Hardware Design Guide]
 +
*** [http://files.pine64.org/doc/datasheet/project_anakin/LTE_moduleQuectel_EC25_Reference_Design_Rev.D_20161111.pdf Quectel EC25 LTE Module Reference Design Guide]
  
 
== Other Resources ==
 
== Other Resources ==

Revision as of 22:51, 13 November 2018

Setting Up Your device - What You’ll Need to Get Started

You will need the following to get started with using your PINE A64(+), SOPine/PINE A64-LTS, Pinebook or ROCK64 board:

  • Windows / Linux PC or MAC with a SD Card Reader connected to the Internet.
  • For PINE A64(+): Power Supply (PSU) and a micro usb cable. Please make sure to use a PSU rated at +5V @2A and a micro USB cable that is at least 26 AWG thick.
  • For SOPine/PINE A64-LTS: Power Supply (PSU) with 3.5mm OD/1.5mm ID barrel DC Jack. Please make sure to use a PSU rated at +5V @2A.
  • For Pinebook and ROCK64: Power Supply (PSU) with 3.5mm OD/1.5mm ID barrel DC Jack. Please make sure to use a PSU rated at +5V @3A.
  • MicroSD card (8GB or higher capacity) rated 'class 10' or better.
  • HDMI cable (unless you wish to run headless / without a monitor). On A64 Devices Android and Remix OS support 720p and 1080p, while Linux supports a wider range of resolutions.
  • Input device(s) such as: keyboard, mouse, remote, pointer, etc.


A One-Step Solution to Flashing Your MicroSD Card

Please try our PINE64 Installer to easily select the PINE A64(+), SOPINE/PINE A64-LTS, Pinebook or ROCK64 OS of your choice and flash it to your MicroSD Card.

You can also flash an OS image manually; please follow the instructions below.

Software and OS Image Downloads

Project Anakin

Under the 'SOPINE Software and OS Image Download Section' you can find a complete list of currently supported Mainline Linux Operating System images that work with the Akakin project as well as other related software. The list includes OS images and descriptions of:



These images should be used at your own risk and are not fit for normal use


Mali-400 64-bit Driver

Mali-400 64-bit Driver [20171220]

Accessories Step-by-Step Guides

Under 'Guides for PINE A64(+) accessories' you can find instructions and guides concerning:

  • Playbox Enclosure
  • Bluetooth and WiFi module
  • 7" Touch Screen LCD Panel

SoC and Memory Specification

  • Based on Allwinner A64/R18
    • R18 and A64 are identical SoC but R18 committed for 10 years supply by vendor.

Allwinner A64.jpg Allwinner R18.png

CPU Architecture

  • Quad-core ARM Cortex-A53 Processor@1152Mhz
  • A power-efficient ARM v8 architecture
  • 64 and 32bit execution states for scalable high performance
  • Support NEON Advanced SIMD (Single Instruction Multiple Data) instruction for acceleration of media and signal processing function
  • Support Large Physical Address Extensions(LPAE)
  • VFPv4 Floating Point Unit
  • 32KB L1 Instruction cache and 32KB L1 Data cache
  • 512KB L2 cache

GPU Architecture

System Memory

  • RAM Memory Variants: 2GB LPDDR3.
  • Storage Memory: SPI Flash and optional eMMC module from 16GB up to 64GB


Project Anakin, SOPine Module and Baseboard Information, Schematics, and Certifications

Datasheets for Components and Peripherals

Other Resources