Difference between revisions of "Pinedio"
Jump to navigation
Jump to search
(→Dietpi) |
|||
Line 59: | Line 59: | ||
Armbian Official Website: https://www.armbian.com | Armbian Official Website: https://www.armbian.com | ||
'''Default Credentials''' | |||
Login: root | |||
password: 1234 | |||
After your first login you will be guided through creating your user account (create a strong password). | |||
'''Steps To Enable spidev0.0 (rakwireless concentrator/GPS device):''' | |||
Inside armbian-config -> system -> Bootenv (edit boot environment), enter the following 2 lines (to create spidev0.0): | |||
overlays=spi-spidev uart2 i2c0 | |||
param_spidev_spi_bus=0 | |||
Or you may hand edit: /boot/armbianEnv.txt to add the above overlays/param_spidev_spi_bus lines. | |||
Save. Reboot. | |||
After rebooting you should see a new device /dev/spidev0.0. This will be the concentrator device for gateway related setup. | |||
GPS will be /dev/ttyS2 and should work (after editing armbianEnv.txt + reboot). | |||
Make sure to offer GPS antenna a strong signal, preferably by a window (if indoors). | |||
====Dietpi==== | ====Dietpi==== |