Difference between revisions of "Pinebook Pro Software Release"

From PINE64
Jump to navigation Jump to search
(added manjaro logo to the right of the installer)
m (Compressed installers section. Removed "Daniel Thompson's Debian Installer" as the official debian installer is very actively developed now)
Line 181: Line 181:




=== Manjaro ARM installer ===
=== Manjaro ARM ===
[[File:Manjaro.png|right|100px]]
[[File:Manjaro.png|right|100px]]


The [https://gitlab.manjaro.org/manjaro-arm/applications/manjaro-arm-installer manjaro-arm-installer] script is intended to install Manjaro ARM directly to SD/eMMC cards without the need for images (including LXQT, Mate & CuboCore editions, as well as full disk encryption). Running on a Linux x86 computer, it can install Manjaro ARM directly to an empty eMMC using an eMMC to USB adapter. The script can also be run from SD to install an image to the eMMC.
The [https://gitlab.manjaro.org/manjaro-arm/applications/manjaro-arm-installer manjaro-arm-installer] script is intended to install Manjaro ARM directly to SD/eMMC cards without the need for images (including LXQT, Mate & CuboCore editions, as well as full disk encryption). Running on a Linux x86 computer, it can install Manjaro ARM directly to an empty eMMC using an eMMC to USB adapter. The script can also be run from SD to install an image to the eMMC.


== Debian Installer ==
=== Debian ===
[[File:debian.png|right|100px]]
[[File:debian.png|right|100px]]
=== Daniel Thompson's Debian Installer for the Pinebook Pro ===
* This is an image creator and Debian installer that runs from an existing Linux OS and installs Debian Bullseye
** Installer can configure an encrypted rootfs and provides a choice of desktops, including the default Debian desktop based on Gnome 3
** Strict adoption of upstream Debian packages (with exception of kernel and bootloaders) in order to provide a clean upgrade path as Bullseye matures
* Download at: https://github.com/daniel-thompson/pinebook-pro-debian-installer/
* Pull requests welcome but for discussion and support please use [https://forum.pine64.org/showthread.php?tid=8487 the forum topic].
For more information, see the [[Pinebook_Pro_Debian_Installer]] wiki page
=== Official Debian Installer Images ===
* Uses only the upstream kernel and firmware without special patches
* Uses only the upstream kernel and firmware without special patches
* No graphical display yet, works only through serial console
* No graphical display yet, works only through serial console
Line 210: Line 199:
The official images are '''not''' recommended yet until the display begins working and the installer properly installs the bootloader. Most users will want to see [[Pinebook Pro Debian Installer|Daniel Thompson's Debian Installer]] instead.
The official images are '''not''' recommended yet until the display begins working and the installer properly installs the bootloader. Most users will want to see [[Pinebook Pro Debian Installer|Daniel Thompson's Debian Installer]] instead.


 
=== Gentoo ===
== Gentoo Script ==
[[File:GentooLogo.png|right|100px]]
[[File:GentooLogo.png|right|100px]]


=== Gentoo Script for Pinebook Pro ===
* This is a script that prepares a Gentoo arm64 stage 3 tarball for the Pinebook Pro
* This is a script that prepares a Gentoo arm64 stage 3 tarball for the Pinebook Pro
** The script takes care of device specifics like an optimized make.conf, an overlay that provides kernel and firmware amongst others, and other miscellaneous fixes
** The script takes care of device specifics like an optimized make.conf, an overlay that provides kernel and firmware amongst others, and other miscellaneous fixes
Line 220: Line 207:
* Forum thread with instructions at https://forum.pine64.org/showthread.php?tid=8765
* Forum thread with instructions at https://forum.pine64.org/showthread.php?tid=8765


 
=== Kali Linux ===
==Kali Script==
[[File:Kali.jpeg|right|100px]]
[[File:Kali.jpeg|right|100px]]


=== Kali Linux for Pinebook Pro ===
* This is a script to create official Kali Linux OS images for the Pinebook Pro
* This is a script to create official Kali Linux OS images for the Pinebook Pro
** The script carries out the build process in entirety and is Pinebook Pro specific
** The script carries out the build process in entirety and is Pinebook Pro specific
Line 230: Line 215:
* For more information regarding building the OS image please read the README instruction at https://gitlab.com/kalilinux/build-scripts/kali-arm/blob/master/README.md
* For more information regarding building the OS image please read the README instruction at https://gitlab.com/kalilinux/build-scripts/kali-arm/blob/master/README.md


 
=== K1ss OS ===
==K1ss OS Script==
[[File:K1ss.png|right|100px]]
[[File:K1ss.png|right|100px]]


=== K1ss Linux for Pinebook Pro ===
* This is a repository containing an unofficial port of KISS Linux to aarch64. The tarball is built for generic aarch64, currently being tested on the Pinebook Pro.
* This is a repository containing an unofficial port of KISS Linux to aarch64. The tarball is built for generic aarch64, currently being tested on the Pinebook Pro.
* Please pull the latest [https://github.com/jedavies-dev/kiss-aarch64 K1ss Linux install script] from the project's GitHub.
* Please pull the latest [https://github.com/jedavies-dev/kiss-aarch64 K1ss Linux install script] from the project's GitHub.
* * You can follow the ongoing discussion about K1ss Linux on the PINE64 forum (https://forum.pine64.org/showthread.php?tid=9304)
* * You can follow the ongoing discussion about K1ss Linux on the PINE64 forum (https://forum.pine64.org/showthread.php?tid=9304)


 
=== NixOS ===
==NixOS Script==
[[File:nixos.png|right|100px]]
[[File:nixos.png|right|100px]]


=== NixOS for Pinebook Pro ===
* This is instructions to install NixOS on the Pinebook Pro: https://nixos.wiki/wiki/NixOS_on_ARM/PINE64_Pinebook_Pro
* This is instructions to install NixOS on the Pinebook Pro: https://nixos.wiki/wiki/NixOS_on_ARM/PINE64_Pinebook_Pro
* Please pull the latest [https://github.com/samueldr/wip-pinebook-pro samueldr's repository ] from the project's GitHub.
* Please pull the latest [https://github.com/samueldr/wip-pinebook-pro samueldr's repository ] from the project's GitHub.
Line 249: Line 230:
* * You can follow the ongoing discussion about NixOS on the PINE64 forum (https://forum.pine64.org/showthread.php?tid=10524)
* * You can follow the ongoing discussion about NixOS on the PINE64 forum (https://forum.pine64.org/showthread.php?tid=10524)


==SkiffOS for Pinebook Pro ==
=== SkiffOS ===
[[File:SkiffOS-Icon-1.png|right|100px]]
[[File:SkiffOS-Icon-1.png|right|100px]]


=== SkiffOS Boot Image for Pinebook Pro ===
* Instructions to build/install on the Pinebook Pro: https://github.com/skiffos/SkiffOS/tree/master/configs/pine64/book
* Instructions to build/install on the Pinebook Pro: https://github.com/skiffos/SkiffOS/tree/master/configs/pine64/book
* Please pull the latest version from the project's GitHub.
* Please pull the latest version from the project's GitHub.
Line 259: Line 239:
* Pre-built ISOs will be available with the upcoming 2021.02  
* Pre-built ISOs will be available with the upcoming 2021.02  
release.
release.
=== Skiff Core ===
* Supports multiple distros running simultaneously.
* Optionally build from scratch on device on first boot.
* Pre-built multi-arch core container images are available.
=== GentooLTO with KDE Apps ===
* GentooLTO with O3 optimized KDE Desktop configuration.
* Use <tt>SKIFF_CONFIG=pine64/book,core/pinebook_gentoo</tt>
* Default sign-in is username "core" w/ empty password.




[[Category:PineBook Pro]]
[[Category:PineBook Pro]]

Revision as of 19:24, 14 May 2021

Linux OS Image Releases

For information on how to install these images onto your device, please see the NOOB Page, which includes information on writing images to the device eMMC or an SD card

Manjaro ARM

Manjaro.png
  • The Manjaro project offers a mainline kernel with patches and modules to support PBPro hardware in two flavors. Both provide DD images and installer images (DD to SD card which will then install to eMMC when booted).
  • To learn more about Manjaro please visit Manjaro Forum
  • You can follow the ongoing discussion about Twister OS on the PINE64 forum (https://forum.pine64.org/showthread.php?tid=8207)

Manjaro ARM with KDE (X11) desktop [microSD / eMMC Boot]

Manjaro ARM with XFCE desktop [microSD / eMMC Boot]

Manjaro ARM with i3 desktop [microSD / eMMC Boot]

Manjaro ARM with Sway desktop [microSD / eMMC Boot]

Armbian

Armbian.png
  • To find out more about Armbian and available options please visit their site
  • DD image to microSD card or eMMC module and boot. Highly recommend using Etcher

Armbian Ubuntu Focal XFCE Desktop mainline kernel [microSD / eMMC Boot]

Armbian Ubuntu Focal XFCE Desktop legacy kernel [microSD / eMMC Boot]

Armbian Debian Buster XFCE Desktop legacy kernel [microSD / eMMC Boot]

Armbian Ubuntu Bionic XFCE Desktop legacy kernel [microSD / eMMC Boot]

Twister OS

Twister OS.png

Twister OS Armbian-Reforged XFCE Dsktop [microSD boot]

Fedora

Fedora1.png

Fedora 34/33/32 Gnome/KDE/Minimal Images [microSD / eMMC Boot]

Fedora 32 Cinnamon Desktop OS Image [microSD / eMMC Boot]

  • This image contains an install of Fedora with Cinnamon desktop environment.
  • To learn more about Fedora please visit the official website.
  • DD image (for 12GB microSD card / eMMC module and above)
  • login with:
    • username: root
    • password: fedora

Fedora 32 KDE Desktop OS Image [microSD / eMMC Boot]

Fedora 32 Xfce Desktop OS Image [microSD / eMMC Boot]

  • This image contains an install of Fedora with xfce desktop environment.
  • To learn more about Fedora please visit the official website.
  • DD image (for 12GB microSD card / eMMC module and above)
  • login with:
    • username: root
    • password: fedora

Fedora 32 Gnome OS Image [microSD / eMMC Boot]

  • This image contains an install of Fedora with GNOME 3 desktop environment.
  • To learn more about Fedora please visit the official website.
  • DD image (for 12GB microSD card / eMMC module and above)
  • login with:
    • username: root
    • password: fedora

Arch Linux

Archlinux-logo.png

Arch Linux ARM install image [microSD/USB Boot]

  • archiso image customized for Arch Linux ARM on the Pinebook Pro
  • DD image (for 1GB or larger microSD card/USB stick):
  • Automatic login as root
  • Make sure to thoroughly read the readme and FAQ, otherwise follow the normal Arch installation guide.

postmarketOS

PostmarketOS logo.png

Official postmarketOS build [microSD/ eMMC Boot]

  • Official postmarketOS build with the GNOME desktop for the Pinebook Pro.
  • DD image (for 8GB microSD card /16GB eMMC module and above):
  • Login with
    • username: demo
    • password: demo OR 147147

Kali Linux

Kali.jpeg

Kali Linux prebuilt OS images for Pinebook Pro [SD/eMMC boot]

Q4OS

Q4os.png

Q4OS Test Build Image [microSD / eMMC Boot]

BSD OS Image Release

NetBSD

Netbsd.png

NetBSD [microSD /eMMC Boot]

  • To learn more about NetBSD please visit NetBSD main page
  • DD image to microSD card or eMMC module. Highly recommend using Etcher
  • Console and SSH default login:
    • username: root
    • password: [none]
  • Instructions concerning enabling SSH can be found here

OpenBSD

Puffy mascot openbsd.png

OpenBSD

Linux Installer Releases

Manjaro ARM

Manjaro.png

The manjaro-arm-installer script is intended to install Manjaro ARM directly to SD/eMMC cards without the need for images (including LXQT, Mate & CuboCore editions, as well as full disk encryption). Running on a Linux x86 computer, it can install Manjaro ARM directly to an empty eMMC using an eMMC to USB adapter. The script can also be run from SD to install an image to the eMMC.

Debian

Debian.png
  • Uses only the upstream kernel and firmware without special patches
  • No graphical display yet, works only through serial console
  • Requires adding the non-free component to your /etc/apt/sources.list file and installing the "firmware-linux" package for Wi-Fi and Bluetooth support
  • Installer is loaded into RAM, can install onto the same media from which it’s booted
  • Supports automatic partitioning and full disk encryption through LVM
  • Installer currently doesn't install the bootloader, leaving the installed system in an unbootable state until it's manually added

The relevant files are built daily here and may sometimes be unavailable if the build system is having issues. The "README.concatenateable_images" file provides instructions on how to combine the partition.img.gz file with the firmware.pinebook-pro.rk3399.img.gz file in order to create a DD-able image.

The official images are not recommended yet until the display begins working and the installer properly installs the bootloader. Most users will want to see Daniel Thompson's Debian Installer instead.

Gentoo

GentooLogo.png
  • This is a script that prepares a Gentoo arm64 stage 3 tarball for the Pinebook Pro
    • The script takes care of device specifics like an optimized make.conf, an overlay that provides kernel and firmware amongst others, and other miscellaneous fixes
  • The usual tarball setup as per Gentoo Handbook is left to the user.
  • Forum thread with instructions at https://forum.pine64.org/showthread.php?tid=8765

Kali Linux

Kali.jpeg

K1ss OS

K1ss.png
  • This is a repository containing an unofficial port of KISS Linux to aarch64. The tarball is built for generic aarch64, currently being tested on the Pinebook Pro.
  • Please pull the latest K1ss Linux install script from the project's GitHub.
  • * You can follow the ongoing discussion about K1ss Linux on the PINE64 forum (https://forum.pine64.org/showthread.php?tid=9304)

NixOS

Nixos.png

SkiffOS

SkiffOS-Icon-1.png
  • Instructions to build/install on the Pinebook Pro: https://github.com/skiffos/SkiffOS/tree/master/configs/pine64/book
  • Please pull the latest version from the project's GitHub.
  • Compiling the boot image takes approximately 30 minutes.
  • Easily configure the kernel, compiler, etc with Buildroot.
  • Pre-built ISOs will be available with the upcoming 2021.02

release.