Difference between revisions of "Pinebook Pro Hardware Accessory Compatibility"

Jump to navigation Jump to search
(add portable monitor.)
Line 72: Line 72:
| 2280 || WD BLUE SN550 || 1TB || WDC WDS100T2B0C-00PXH0 || WARNING <br />good || WARNING mine was SATA and does NOT work!<br /> Booted successfully from NVMe (Bionic MATE) || PS 0: 3.50W<br/>PS 1: 2.70W<br/>PS 2: 1.90W<br/>APSTE Disabled by default || N/A  
| 2280 || WD BLUE SN550 || 1TB || WDC WDS100T2B0C-00PXH0 || WARNING <br />good || WARNING mine was SATA and does NOT work!<br /> Booted successfully from NVMe (Bionic MATE) || PS 0: 3.50W<br/>PS 1: 2.70W<br/>PS 2: 1.90W<br/>APSTE Disabled by default || N/A  
|-
|-
| 2280 || WD Blue SN550 || 500GB || WDC WDS500G2B0C-00PXH0 || good || || PS 0: 3.50W<br/>PS 1: 2.40W<br/>PS 2: 1.90W<br/>APSTE enabled by default with 5.9 kernel (Manjaro XFCE) || No ||
| 2280 || WD Blue SN550 || 500GB || WDC WDS500G2B0C-00PXH0 || good || || PS 0: 3.50W<br/>PS 1: 2.40W<br/>PS 2: 1.90W<br/>APSTE enabled by default with 5.9 kernel (Manjaro XFCE) || No
|-
|-
| 2280 || WD Blue SN500 || 500GB || WDS500G1B0C || fail || Works OK on power state 2 (2.5W), but hangs the system whenever there is intense IO (peak draw) on the drive || ||
| 2280 || WD Blue SN500 || 500GB || WDS500G1B0C || fail || Works OK on power state 2 (2.5W), but hangs the system whenever there is intense IO (peak draw) on the drive || ||
Line 79: Line 79:
| 2242 || WD PC SN520 || 256GB || - || fail || Power LED Flashes. Nothing else happens. || ||
| 2242 || WD PC SN520 || 256GB || - || fail || Power LED Flashes. Nothing else happens. || ||
|-
|-
| 2280 || WD PC SN730 || 512GB || SDBPNTY-512G-1032 || good || No touchpad issues. Works after latest updates. ||APST enabled by default<br/>PS 0: 5.50W<br/>PS 1: 3.50W<br/>PS 2: 3.00W<br/>PS 3: 0.0700W<br/>PS 4: 0.0025W || No ||
| 2280 || WD PC SN730 || 512GB || SDBPNTY-512G-1032 || good || No touchpad issues. Works after latest updates. ||APST enabled by default<br/>PS 0: 5.50W<br/>PS 1: 3.50W<br/>PS 2: 3.00W<br/>PS 3: 0.0700W<br/>PS 4: 0.0025W || No
|-
|-
| 2280 || WD BLACK SN750 || 250GB || WDS250G3X0C-00SJG0 || good || No touchpad issues, didn't trim NVME adapter board. || APSTE disabled by default<br/> PS 0: 5.00W<br/>PS 1: 3.50W<br/>PS 2: 3.00W||
| 2280 || WD BLACK SN750 || 250GB || WDS250G3X0C-00SJG0 || good || No touchpad issues, didn't trim NVME adapter board. || APSTE disabled by default<br/> PS 0: 5.00W<br/>PS 1: 3.50W<br/>PS 2: 3.00W||
Retrieved from "https://wiki.pine64.org/wiki/Pinebook_Pro_Hardware_Accessory_Compatibility"