Difference between revisions of "PineTime"

From PINE64
Jump to navigation Jump to search
Line 80: Line 80:
* Note: The color code on the PineTime's SWD probe is random color.
* Note: The color code on the PineTime's SWD probe is random color.
* Please slightly zig-zag bent the probe pins to left and right, this allows the proble has better contact with the PineTime dev kit.
* Please slightly zig-zag bent the probe pins to left and right, this allows the proble has better contact with the PineTime dev kit.
[[File:SWD_Plugin.jpg]]
[[File:PineTime_SWD_Plugin.jpg
 


== Datasheets for Components ==
== Datasheets for Components ==

Revision as of 01:57, 21 October 2019

PINE64 SmartWatch "PineTime"

The PINE64 SmartWatch, dubbed "PineTime", is a product of a community effort for an open source smartwatch in collaboration with wearable RTOS and Linux app developers/communities.

PineTime development has been broken down into two distinct phases:

  • Phase One - PineTime Dev Kit Project on October 2019
  • Phase Two - Introducing the PineTime smartwatch around Q1 2020, depending on development results in Phase 1.

PineTime Concept Photo

PineTime leaflet.jpg

PineTime Case and Charging Cradle Photos

PineTime on wrist Photo.jpg PineTime PPG Sensor Photo.jpg PineTime Charging Cradle Photo.jpg

PineTime DevKit internal Photos

PineTime Devkit-1.jpg PineTime Devkit-2.jpg PineTime Devkit-3.jpg

PineTime Devkit-4.jpg PineTime Devkit-5.jpg PineTime Devkit-6.jpg

Watch Information

  • LAUNCH:
    • Announced: Tweet on 13 September 2019
    • Devkit Release: October, 2019
    • Expected Release: Q1/Q2 2020, pending on development result
    • Availability: at least 5 years
  • BODY:
    • Dimensions: 37.5mm x 40mm x 11mm
    • Weight: 38 grams
    • Build: Zinc Alloy and Plastic
    • Environmental Rating: IP67 (waterproof to 1 meter of immersion; not applicable to devkits)
  • DISPLAY:
    • Type: IPS capacitive touchscreen, RGB 65K colors
    • Size: 1.3 inches
    • Resolution: 240x240 pixels, 1:1 ratio
  • PLATFORM:
    • OS: Various open source RTOS such as Zephyr, FreeRTOS, Mbed, Mynewt, or NuttX
    • SoC: NORDIC Semiconductor nRF52832 (final product may use nRF52840)
    • CPU: 64MHz ARM Cortex-M4F
  • MEMORY:
    • Internal: 512KB Flash, 64KB RAM (nRF52840: 1 MB flash, 256KB RAM)
    • Additional: SPI NOR 8MB Flash
  • COMMUNICATION:
    • Bluetooth 5 (including Low Energy)
  • FEATURES:
    • Sensors: Accelerometer, PPG Heart Rate Sensor
    • Actuator: Vibrator
  • BATTERY:
    • Built-in LiPo 170-180mAh battery
    • Charging: Proprietary 2pin 5V 500mA, USB type A plug
  • PRICE:
    • USD $22.99 (PineTime pebble and charging cradle, based on phone on PineTime devkit hardware configuration)
    • USD $2 and up (20mm straight generic wrist band: silicone, NATO, Milanese steel, leather, and etc)

PineTime Schematic and Certifications


PineTime DevKit SWD Probe

  • PineTime SWD probe pin defination:

PineTime SWD location.jpg

  • PineTime SWD probe usage method:
  • Note: The color code on the PineTime's SWD probe is random color.
  • Please slightly zig-zag bent the probe pins to left and right, this allows the proble has better contact with the PineTime dev kit.

[[File:PineTime_SWD_Plugin.jpg

Datasheets for Components