Difference between revisions of "PineTab2 Releases"

From PINE64
Jump to navigation Jump to search
(Style fix)
(Force ToC)
Line 2: Line 2:


The installation instructions can be found under [[PineTab2#Installation instructions]].
The installation instructions can be found under [[PineTab2#Installation instructions]].
__TOC__


== Linux ==
== Linux ==

Revision as of 19:33, 18 June 2023

This page contains a list of all available releases and tools for the PineTab2 in alphabetical order.

The installation instructions can be found under PineTab2#Installation instructions.

Linux

Arch Linux ARM

(Unofficial) Arch Linux ARM maintained by the DanctNIX community (GitHub: danctnix, dreemurrs-embedded). This includes uboot.

Download:

Default credentials
Default user alarm/123456

Notes:

Mobian

Debian-logo.png

An unofficial Debian build for ARM64 running with Phosh.

The current version of the base Debian system is Debian Bookworm.

Download:

  • Images (until the weekly images are built, you can download the PineTab2 image from here)
Note: U-Boot is required to be able to boot the images, see here!

You can install U-Boot to the SPI, EMMC, or an SD card.

If you are booting Mobian from an SD card, the pre-installed U-Boot from the EMMC should boot it.
Default credentials
Default user mobian/1234

Notes:

  • The development is work in progress. Mobian's support for the PineTab2 is maintained by Julian. The Mobian wiki can be found here.
  • In order to connect to the device using SSH/SCP, you need to install SSH on the device. You can do this by executing the following in a shell: "sudo apt-get install ssh", afterwards you can connect via SSH/SCP using the PineTab2's IP address on port 22.