Difference between revisions of "PinePhone v1.2b"

From PINE64
Jump to navigation Jump to search
m
(fix)
(One intermediate revision by the same user not shown)
Line 10: Line 10:


== Known issues ==  
== Known issues ==  
The backlight issue of v1.2 is still present, see [[PinePhone v1.2#Backlight]].
 
* It is not known if backlight issues of previous revisions are still present and if yes to which degree, or if they have been fixed by removing resistor R1318, see [[PinePhone v1.2#Backlight]] for some details. Please edit this page once this has been confirmed. Mind that there is currently a likely software-related bug present, which also causes the screen to flicker. The bug usually happens after abruptly shutting down the phone previously (for example by forcing it off), in contrast to powering it off.




[[Category:PinePhone]]
[[Category:PinePhone]]

Revision as of 10:16, 12 April 2021

The PinePhone v1.2b is a hardware revision of the PinePhone that started shipping in Q4 2020.

This page contains information and resources which are specific to the v1.2b revision of the PinePhone. For other revisions or for resources related to all PinePhone revisions, see PinePhone#Hardware revisions.

Schematics

Changes from v1.2a

  • A bug was fixed, where connecting a VBUS powered device lowered the screen brightness (resistor R1318 changed to NC).

Known issues

  • It is not known if backlight issues of previous revisions are still present and if yes to which degree, or if they have been fixed by removing resistor R1318, see PinePhone v1.2#Backlight for some details. Please edit this page once this has been confirmed. Mind that there is currently a likely software-related bug present, which also causes the screen to flicker. The bug usually happens after abruptly shutting down the phone previously (for example by forcing it off), in contrast to powering it off.