Difference between revisions of "PinePhone v1.2b"

From PINE64
Jump to navigation Jump to search
(this could be WRONG, but I think postmarketOS edition was 1.2a, manjaro 1.2b)
(added description)
 
(14 intermediate revisions by 6 users not shown)
Line 1: Line 1:
DRAFT:
The PinePhone v1.2b is a hardware revision of the [[PinePhone]] that started shipping in Q4 2020.


 
This page contains information and resources which are specific to the v1.2b revision of the PinePhone. For other revisions or for resources related to all PinePhone revisions, see [[PinePhone#Hardware revisions]].
The PinePhone v1.2b is a hardware revision of the PinePhone that started shipping in Q4 2020.
 
This page contains information and resources which are specific to the v1.2b revision of the PinePhone. For other revisions or for resources related to all PinePhone revisions, see [[PinePhone#Hardware Revisions]].  


== Schematics ==
== Schematics ==
* [https://files.pine64.org/doc/PinePhone/PinePhone%20v1.2b%20Released%20Schematic.pdf Hardware schematic v1.2a] (for the PostmarketOS Community Edition)
* [https://files.pine64.org/doc/PinePhone/PinePhone%20v1.2b%20Released%20Schematic.pdf Hardware schematic v1.2b] (for the Manjaro Community Edition)


== Changes from v1.2a ==
== Changes from v1.2a ==
* A bug was fixed, where connecting a VBUS powered device lowered the screen brightness (resistor R1318 changed to NC).
* A bug was fixed, where connecting a VBUS powered device lowered the screen brightness (resistor R1318 changed to NC).
== Changes with the Beta Edition ==
* Due to the global pandemic early 2021 and the component shortage as a result, the magnetometer in the Beta Edition had to be replaced from an LIS3MDL to an AF8133J.


== Known issues ==  
== Known issues ==  
The backlight issue of v1.2 is still present, see [[PinePhone v1.2#Backlight]].
 
* HDMI hotplug detection is not reliable due to a HW bug in level shifting circuitry for the hot plug detect (HPD) signal between HDMI bridge and A64 SoC, see [https://xnux.eu/log/#045 megi's blog post].
* It is not known if three issues of previous revisions are still present and if yes to which degree, or if they have been fixed by removing resistor R1318, see [[PinePhone v1.2#Backlight]] for some details. Please edit this page once this has been confirmed. Mind that there is currently a likely software-related bug present, which also causes the screen to flicker. The bug usually happens after abruptly shutting down the phone previously (for example by forcing it off), in contrast to powering it off.




[[Category:PinePhone]]
[[Category:PinePhone]]
[[Category:PinePhone Revisions]]

Latest revision as of 15:23, 27 February 2023

The PinePhone v1.2b is a hardware revision of the PinePhone that started shipping in Q4 2020.

This page contains information and resources which are specific to the v1.2b revision of the PinePhone. For other revisions or for resources related to all PinePhone revisions, see PinePhone#Hardware revisions.

Schematics

Changes from v1.2a

  • A bug was fixed, where connecting a VBUS powered device lowered the screen brightness (resistor R1318 changed to NC).

Changes with the Beta Edition

  • Due to the global pandemic early 2021 and the component shortage as a result, the magnetometer in the Beta Edition had to be replaced from an LIS3MDL to an AF8133J.

Known issues

  • HDMI hotplug detection is not reliable due to a HW bug in level shifting circuitry for the hot plug detect (HPD) signal between HDMI bridge and A64 SoC, see megi's blog post.
  • It is not known if three issues of previous revisions are still present and if yes to which degree, or if they have been fixed by removing resistor R1318, see PinePhone v1.2#Backlight for some details. Please edit this page once this has been confirmed. Mind that there is currently a likely software-related bug present, which also causes the screen to flicker. The bug usually happens after abruptly shutting down the phone previously (for example by forcing it off), in contrast to powering it off.