Difference between revisions of "PinePhone v1.1 - Braveheart"

Jump to navigation Jump to search
(Undo revision 9428 by Dsimic (talk) Dev page)
Tag: Undo
(lang)
Line 40: Line 40:
''Resolved in v1.2 by connecting PL2 to the WiFi module's WiFi reset pin.''
''Resolved in v1.2 by connecting PL2 to the WiFi module's WiFi reset pin.''


Neither the <tt>WL-REG-ON</tt> nor <tt>WL-PMU-EN</tt> signal is connected to anything, and the WiFi module's <tt>CHIP_EN</tt> pin is connected (through the killswitch) to a regulator that cannot be turned off (easily, if at all). So while the killswitch works, there's no way to disable the WiFi module in software. This will lead to excess power consumption when WiFi is turned off.
Neither the <tt>WL-REG-ON</tt> nor <tt>WL-PMU-EN</tt> signal is connected to anything, and the WiFi module's <tt>CHIP_EN</tt> pin is connected (through the privacy switch) to a regulator that cannot be turned off (easily, if at all). So while the privacy switch works, there's no way to disable the WiFi module in software. This will lead to excess power consumption when WiFi is turned off.


=== Magnetometer's IRQ signal is routed to the wrong pin ===
=== Magnetometer's IRQ signal is routed to the wrong pin ===
Retrieved from "https://wiki.pine64.org/wiki/PinePhone_v1.1_-_Braveheart"