Difference between revisions of "PinePhone Software Releases"

Jump to navigation Jump to search
(Alphabetical order, added OpenMandriva)
Line 8: Line 8:
This is a list of OSes that specifically support the PinePhone, but as support is included in Mainline Linux, in principle any ARM Linux OS can be used, if possible required patches are included.
This is a list of OSes that specifically support the PinePhone, but as support is included in Mainline Linux, in principle any ARM Linux OS can be used, if possible required patches are included.


== postmarketOS ==
== Arch Linux ARM ==
[[File:PostmarketOS-logo.png|100px]]
[[File:Archlinux-logo.png|100px]]


postmarketOS is a preconfigured version of [https://www.alpinelinux.org/ Alpine Linux] for mobile devices that offers a choice of several desktop environments including Plasma Mobile and Phosh.
(Unofficial) Arch Linux ARM with Phosh as the UI selection, it's usable on the PinePhone and currently being maintained by the DanctNIX community.


* ''' Download location '''
* ''' Download location '''
Rather than downloading a demo image, postmarketOS [https://wiki.postmarketos.org/wiki/Installation_guide recommends the use of their script], pmbootstrap, that can tailor build your SD card for you.
Get the latest image here: https://github.com/dreemurrs-embedded/Pine64-Arch/releases
 
Note: pmbootstrap offers an option [https://wiki.postmarketos.org/wiki/PINE64_PinePhone_(pine64-pinephone)#Installation to install to the eMMC].
 
Demo images can be found [http://images.postmarketos.org/pinephone/ here].


* ''' username/password '''
* ''' username/password '''
demo/147147 (for demo images only - when building an image with pmbootstrap you set your own username and password (the Phosh lock screen requires your password, but only presents a numeric keyboard, so you should use only numbers in your password).
alarm/123456


* ''' What works, what does not work '''
* ''' What works, what does not work '''
See [https://wiki.postmarketos.org/wiki/PINE64_PinePhone_(pine64-pinephone) postmarketOS dedicated PinePhone wiki page]
Most of the things now works, there are some minor issues with crust.


If you install Firefox browser (or are using a demo image that already has it installed) then [https://wiki.postmarketos.org/wiki/Firefox these hints] in the postmarketOS wiki are recommended.
* ''' How to contribute and report defects  '''
Feel free to send us merge requests and report issues on [https://github.com/dreemurrs-embedded/Pine64-Arch/pulls GitHub].


* ''' How to contribute and report defects '''
== Fedora ==
[https://gitlab.com/postmarketOS/postmarketos/issues/3 postmarketOS issue tracker] for PinePhone support. See [https://wiki.postmarketos.org/wiki/Contributing postmarketOS wiki] for options to contribute.
[[File:Fedora-logo.png|100px]]


== Ubuntu Touch ==
An (unofficial) vanilla Fedora rawhide build for aarch64 with megi's kernel and [https://copr.fedorainfracloud.org/coprs/njha/mobile/packages/ some additional packages] to tie it all together. It aims to eventually be an upstream part of the Fedora project, rather than a phone-specific distribution.
[[File:Ubports-logo.png|100px]]


A Mobile Version of the Ubuntu Operating System made and maintained by the UBports Community.
See [https://forum.pine64.org/showthread.php?tid=9347 this thread in the forum].
 
Ubuntu touch is a mobile version of Ubuntu developed by the UBports community. Installation instructions can be found on [https://gitlab.com/ubports/community-ports/pinephone#how-do-i-install-ubuntu-touch-on-my-pinephone the UBports PinePhone project]. There is also a [https://github.com/goddard/pinephone/ script] to download the latest image and flash to your PinePhone. In the future, Ubuntu Touch will be able to be installed onto the PinePhone with the [https://devices.ubuntu-touch.io/installer UBports installer] GUI tool.


* ''' Download location '''
* ''' Download location '''
[https://gitlab.com/ubports/community-ports/pinephone#how-do-i-install-ubuntu-touch-on-my-pinephone UBports PinePhone project]
[https://github.com/nikhiljha/pp-fedora-sdsetup/releases/ flashable images] or [https://github.com/nikhiljha/pp-fedora-sdsetup/tree/image build scripts]


* ''' username/password '''
* ''' username/password '''
Set up during boot
pine/1111


* ''' What works, what does not work '''
* ''' What works, what does not work '''
Scroll down to the bottom of [https://gitlab.com/ubports/community-ports/pinephone this page].
WiFi, Bluetooth, SMS, Data, Calls all work! There are still a few bugs though, and [some features don't have driver support yet https://xnux.eu/devices/pine64-pinephone.html#toc-feature-driver-support-matrix] on any PinePhone distribution.  


* ''' How to contribute and report defects '''
* ''' How to contribute and report defects '''
See [https://gitlab.com/ubports/community-ports/pinephone UBports gitlab page]. See [https://ubports.com/foundation/sponsors UBports website] for how to donate.
Please send your bug reports at [https://github.com/nikhiljha/pp-fedora-sdsetup/issues the project's issue tracker]. Be sure to include logs if applicable! Send us merge requests on [https://github.com/nikhiljha/pp-fedora-sdsetup/ Github].


== Gentoo ==


== Mobian ==
An unofficial Gentoo overlay with ebuilds for the PinePhone. There is no image - you'll be building it yourself, picking which kernel, bootloader and desktop environment you want to use.
[[File:Debian-logo.png]]
 
An unofficial Debian build for ARM64 running with the Phosh user interface (developed by Purism, Phosh uses Wayland instead of Xorg). The base system is pure Debian, with only the GUI applications and a few others (ModemManager, WiFi chip firmware) being built from modified sources (as well as the kernel and u-boot). Current version is Debian Bullseye.


* ''' Download location '''
* ''' Download location '''
[http://images.mobian-project.org/ Mobian downloadable images]


Don't forget to extract the image before installing:
https://gitlab.com/bingch/gentoo-overlay/-/blob/master/README.md
$ gzip -d Downloads/mobian-pinephone-*.img.gz


See the [https://wiki.mobian-project.org/doku.php?id=install project page] for specific installation instructions.
== GloDroid ==


* ''' username/password '''
{{warning|Available images are outdated and do not reflect the state of the current developments.}}
mobian/1234


* ''' What works, what does not work '''
A fully open source port of Android to the PinePhone


See [https://gitlab.com/mobian1/mobian-recipes/-/blob/master/README.md the project's README file] or [https://wiki.mobian-project.org/doku.php?id=pinephone the wiki]for most up to date status.
* ''' Download location '''


Check [https://gitlab.com/groups/mobian1/-/issues bug tracker] for known issues. Questions? Ask on our [https://forum.pine64.org/showthread.php?tid=9016 thread].
https://github.com/GloDroid/glodroid_manifest/releases


* ''' How to contribute and report defects '''
* ''' username/password'''
It is recommended that you log your bug reports in [https://gitlab.com/mobian1/issues the project's issue tracker]. As a general rule, issues with third-party apps (even the default ones) should be reported upstream. A Mobian issue would be related to getting the hardware to work on the PinePhone, but if unsure where the issue should be reported just open a ticket or ask. Feel free to pick an open issue to work on, or send a merge request on [https://gitlab.com/mobian1 Gitlab].
* ''' What works, what does not work '''
Works: WiFi, screen dimming, touchscreen and charging work.
Don't work: Bluetooth, Telephony, GPS


* ''' Notes '''
== KDE Neon ==
See [[Mobian for PinePhone]] or [https://wiki.mobian-project.org/doku.php?id=start the wiki] for additional information regarding screen resolution, USB networking, WiFi hotspot, Chatty and the repository.


== SailfishOS ==
{{Hint|It is recommended to use Manjaro with Plasma Mobile instead, as development has shifted towards Manjaro.}}
[[File:Sailfish_logo.png|150px]]


Sailfish OS is a Linux-based operating system based on open source projects such as Mer and including a closed source UI.
Based on KDE Neon for the desktop, comes with Plasma Mobile.


* ''' Download location '''
* ''' Download location '''
The SailfishOS image is built on Gitlab CI. The latest image can be installed using the [https://raw.githubusercontent.com/sailfish-on-dontbeevil/flash-it/master/flash-it.sh flashing script].
Plasma mobile images can be found [https://images.plasma-mobile.org/pinephone/ here].
 
The script downloads the image and bootloader from our CI, extracts everything and burns it onto the SD card. '''Note:''' The script will format and erase the SD card!


Instructions:
# Download the flashing script
# Insert a microSD card in your device
# Make the script executable: <code>chmod +x flash-it.sh</code>
# Verify that you have the <code>bsdtar</code> package installed
# Execute it: <code>./flash-it.sh</code>
# Follow the instructions. Some commands in the script require root permissions (for example: mounting and flashing the SD card).
* ''' username/password '''
* ''' username/password '''
 
phablet/1234
OR...when asked where to flash, type 'raw' and it will build the image on your pc/mac
 
OR....download the .img from https://gitlab.com/as400l/pp-sailfishos-images
 
Set PIN on initialization.


* ''' What works, what does not work '''
* ''' What works, what does not work '''
NB The first run sometimes stalls before the tutorial. Reboot and it starts from setting the security pin.
The homescreen may be locked unless you boot with a sim card inserted. An old expired sim will do. If you do not have a SIM card on hands, do NOT set a security code on first boot. When a screen with a loading circle is displayed, just left/right swipe it away.
May 4th 2020: 3.3.0.16 release. Nextcloud integration.
Sept 17. Calls work.....sort of. Volunteer troubleshooters required. 4G works. Nextcloud sync works. Camera is work-in-progress.
October 10. The most recent build still has call problems. The battery indicator stays at value on boot and the battery discharges very quickly. Apart from all that SFOS is still the snappiest most responsive UI, with none of the scaling and lagging problems that make phosh such a drag.
October 20. New build improves battery indicator but it's still erratic. Calls still problematic. No camera.
December 1. New image updated to 3.4.0.24. If you SSH, the user is "defaultuser" instead of "nemo".
On the pinephone the boot process still takes 2 or three attempts before getting to the enter security pin screen.
If you're not familiar with SFOS pay attention to the tutorial - the interface works great but isn't immediately obvious. If you are familiar with SF you can skip the tutorial by touching all 4 corners starting top left. There is a limited selection of apps available from the Jolla store, the vast majority are hosted on openrepos.net. The Storeman app for openrepos is now preinstalled, and also Webcat browser as the built in browser is not working at the moment.


* ''' How to contribute and report defects '''
* ''' How to contribute and report defects '''


See the [https://sailfishos.org/wiki/Collaborative_Development#Reporting_issues SailfishOS wiki] for links to their forum as well as info required when reporting an issue. See the [https://sailfishos.org/wiki/SailfishOS SailfishOS wiki] for options to contribute
== LuneOS ==
<!--http://files.pine64.org/sw/pine64_installer/json/luneos.jpg-->


* ''' Notes '''
Based on WebOS by LG, comes with Luna Next desktop environment.
OTA is supported: <code>zypper refresh && zypper update</code> as root (<code>devel-su</code> to get root access). Things that need reflash are bootloader specific at the moment. If improvements like crust or changes of partition layout are added then you need to reflash.
 
== Fedora ==
[[File:Fedora-logo.png|100px]]
 
An (unofficial) vanilla Fedora rawhide build for aarch64 with megi's kernel and [https://copr.fedorainfracloud.org/coprs/njha/mobile/packages/ some additional packages] to tie it all together. It aims to eventually be an upstream part of the Fedora project, rather than a phone-specific distribution.
 
See [https://forum.pine64.org/showthread.php?tid=9347 this thread in the forum].


* ''' Download location '''
* ''' Download location '''
[https://github.com/nikhiljha/pp-fedora-sdsetup/releases/ flashable images] or [https://github.com/nikhiljha/pp-fedora-sdsetup/tree/image build scripts]
[http://build.webos-ports.org/luneos-testing/images/pinephone/ LuneOS test image for PinePhone]
Tofe recommends using bmaptool ; for example "bmaptool copy http://build.webos-ports.org/luneos-testing/images/pinephone/luneos-dev-image-pinephone-testing-0-15.rootfs.wic.gz /dev/mmcblk0". Rename .wic file to .img for standard dd usage.


* ''' username/password '''
* ''' username/password '''
pine/1111


* ''' What works, what does not work '''
* ''' What works, what does not work '''
WiFi, Bluetooth, SMS, Data, Calls all work! There are still a few bugs though, and [some features don't have driver support yet https://xnux.eu/devices/pine64-pinephone.html#toc-feature-driver-support-matrix] on any PinePhone distribution.


* ''' How to contribute and report defects '''
* ''' How to contribute and report defects '''
Please send your bug reports at [https://github.com/nikhiljha/pp-fedora-sdsetup/issues the project's issue tracker]. Be sure to include logs if applicable! Send us merge requests on [https://github.com/nikhiljha/pp-fedora-sdsetup/ Github].


== Arch Linux ARM ==
== Maemo Leste ==
[[File:Archlinux-logo.png|100px]]
[[File:Maemoleste-logo.png|100px]]
 
[https://en.wikipedia.org/wiki/Maemo Maemo] is a trimmed-down version of Debian for mobile devices, originally a collaboration between Nokia and many open source projects (the [http://maemo.org/intro/ Maemo community]) before Nokia abandoned it. The community now takes full responsibility in developing fully open source Maemo for a variety of mobile devices.
 
The new version Maemo 7 "Leste" is an ARM64 port of [https://devuan.org/ Devuan] (Debian without systemd) and runs the mainline Linux kernel. The default user interface stack is [https://en.wikipedia.org/wiki/Hildon Hildon], [https://en.wikipedia.org/wiki/X.Org_Server Xorg], [https://en.wikipedia.org/wiki/Matchbox_(window_manager) Matchbox WM], and [https://en.wikipedia.org/wiki/GTK GTK]. The current version is Devuan Ascii (Debian Stretch) and they are working on an upgrade to Devuan Beowulf (Debian Buster) as well as simultaneous support for both Devuan and Debian. In addition to the main repository, they [https://maemo-leste.github.io/maemo-leste-repositories-and-community-packages.html announced] a [https://github.com/maemo-leste-extras/bugtracker community repository]. To keep updated they use automation in their package maintenance with [https://github.com/maemo-leste/jenkins-integration jenkins] (similar to [https://www.debian.org/devel/buildd/ debian's buildd]). Porting packages to Maemo Leste is basically a simple matter of porting to arm64 version of Debian/Devuan, which benefits both projects.


(Unofficial) Arch Linux ARM with Phosh as the UI selection, it's usable on the PinePhone and currently being maintained by the DanctNIX community.
More detailed information can be found on [https://leste.maemo.org/Main_Page the Maemo Leste wiki], or follow [https://maemo-leste.github.io/ announcements on their website], and check out [https://leste.maemo.org/Leste_FAQ Frequently Asked Questions].  


* ''' Download location '''
* ''' Download location '''
Get the latest image here: https://github.com/dreemurrs-embedded/Pine64-Arch/releases
[http://maedevu.maemo.org/images/pinephone/ Maemo Leste test builds]. There is also an [https://github.com/maemo-leste/image-builder image builder], see their wiki for instructions on how to [https://leste.maemo.org/Image_Builder build a custom image].


* ''' username/password '''
* ''' username/password '''
alarm/123456
root/toor
 
You may use "sudo" directly.


* ''' What works, what does not work '''
* ''' What works, what does not work '''
Most of the things now works, there are some minor issues with crust.
For current status and workarounds please read their [https://leste.maemo.org/PinePhone PinePhone wiki page], and update as necessary (make sure to notify them of new issues by leaving a report on their github, see below).
 
* ''' How to contribute and report defects '''
Most discussion occurs at #maemo-leste on freenode IRC. The Maemo website also has an [https://talk.maemo.org/showthread.php?p=1565822 ongoing forum thread] for feedback about Maemo Leste on the PinePhone BraveHeart edition.


* ''' How to contribute and report defects  '''
All other contact information is listed on the [https://leste.maemo.org/Main_Page main page] of the Maemo wiki. You should [https://github.com/maemo-leste/bugtracker/issues submit bug reports] on github. To track known issues, you may use these search terms: [https://github.com/maemo-leste/bugtracker/issues?utf8=%E2%9C%93&q=is%3Aissue+is%3Aopen+pinephone pinephone], [https://github.com/maemo-leste/bugtracker/issues?utf8=%E2%9C%93&q=is%3Aissue+is%3Aopen+pine64 pine64]. Learn about [https://leste.maemo.org/Development development], [https://leste.maemo.org/Development/Porting_Packages porting packages], [https://leste.maemo.org/Development/Building_Packages building packages], [https://leste.maemo.org/Development/Tasks todo list], and general info on [https://wiki.debian.org/HowToPackageForDebian how to package for Debian]. Some tasks have funding available.
Feel free to send us merge requests and report issues on [https://github.com/dreemurrs-embedded/Pine64-Arch/pulls GitHub].


== Manjaro ARM ==
== Manjaro ARM ==
Line 187: Line 147:
See the end of the [https://forum.manjaro.org/t/manjaro-arm-beta4-with-phosh-pinephone/43299 announcement].
See the end of the [https://forum.manjaro.org/t/manjaro-arm-beta4-with-phosh-pinephone/43299 announcement].


== Maemo Leste ==
== Mobian ==
[[File:Maemoleste-logo.png|100px]]
[[File:Debian-logo.png]]


[https://en.wikipedia.org/wiki/Maemo Maemo] is a trimmed-down version of Debian for mobile devices, originally a collaboration between Nokia and many open source projects (the [http://maemo.org/intro/ Maemo community]) before Nokia abandoned it. The community now takes full responsibility in developing fully open source Maemo for a variety of mobile devices.  
An unofficial Debian build for ARM64 running with the Phosh user interface (developed by Purism, Phosh uses Wayland instead of Xorg). The base system is pure Debian, with only the GUI applications and a few others (ModemManager, WiFi chip firmware) being built from modified sources (as well as the kernel and u-boot). Current version is Debian Bullseye.


The new version Maemo 7 "Leste" is an ARM64 port of [https://devuan.org/ Devuan] (Debian without systemd) and runs the mainline Linux kernel. The default user interface stack is [https://en.wikipedia.org/wiki/Hildon Hildon], [https://en.wikipedia.org/wiki/X.Org_Server Xorg], [https://en.wikipedia.org/wiki/Matchbox_(window_manager) Matchbox WM], and [https://en.wikipedia.org/wiki/GTK GTK]. The current version is Devuan Ascii (Debian Stretch) and they are working on an upgrade to Devuan Beowulf (Debian Buster) as well as simultaneous support for both Devuan and Debian. In addition to the main repository, they [https://maemo-leste.github.io/maemo-leste-repositories-and-community-packages.html announced] a [https://github.com/maemo-leste-extras/bugtracker community repository]. To keep updated they use automation in their package maintenance with [https://github.com/maemo-leste/jenkins-integration jenkins] (similar to [https://www.debian.org/devel/buildd/ debian's buildd]). Porting packages to Maemo Leste is basically a simple matter of porting to arm64 version of Debian/Devuan, which benefits both projects.
* ''' Download location '''
[http://images.mobian-project.org/ Mobian downloadable images]


More detailed information can be found on [https://leste.maemo.org/Main_Page the Maemo Leste wiki], or follow [https://maemo-leste.github.io/ announcements on their website], and check out [https://leste.maemo.org/Leste_FAQ Frequently Asked Questions].  
Don't forget to extract the image before installing:
$ gzip -d Downloads/mobian-pinephone-*.img.gz


* ''' Download location '''
See the [https://wiki.mobian-project.org/doku.php?id=install project page] for specific installation instructions.
[http://maedevu.maemo.org/images/pinephone/ Maemo Leste test builds]. There is also an [https://github.com/maemo-leste/image-builder image builder], see their wiki for instructions on how to [https://leste.maemo.org/Image_Builder build a custom image].


* ''' username/password '''
* ''' username/password '''
root/toor
mobian/1234
 
* ''' What works, what does not work '''


You may use "sudo" directly.
See [https://gitlab.com/mobian1/mobian-recipes/-/blob/master/README.md the project's README file] or [https://wiki.mobian-project.org/doku.php?id=pinephone the wiki]for most up to date status.


* ''' What works, what does not work '''
Check [https://gitlab.com/groups/mobian1/-/issues bug tracker] for known issues. Questions? Ask on our [https://forum.pine64.org/showthread.php?tid=9016 thread].
For current status and workarounds please read their [https://leste.maemo.org/PinePhone PinePhone wiki page], and update as necessary (make sure to notify them of new issues by leaving a report on their github, see below).


* ''' How to contribute and report defects '''
* ''' How to contribute and report defects '''
Most discussion occurs at #maemo-leste on freenode IRC. The Maemo website also has an [https://talk.maemo.org/showthread.php?p=1565822 ongoing forum thread] for feedback about Maemo Leste on the PinePhone BraveHeart edition.
It is recommended that you log your bug reports in [https://gitlab.com/mobian1/issues the project's issue tracker]. As a general rule, issues with third-party apps (even the default ones) should be reported upstream. A Mobian issue would be related to getting the hardware to work on the PinePhone, but if unsure where the issue should be reported just open a ticket or ask. Feel free to pick an open issue to work on, or send a merge request on [https://gitlab.com/mobian1 Gitlab].
 
* ''' Notes '''
See [[Mobian for PinePhone]] or [https://wiki.mobian-project.org/doku.php?id=start the wiki] for additional information regarding screen resolution, USB networking, WiFi hotspot, Chatty and the repository.
 
== Multi-boot image ==
 
The purpose of this image is for users to easily try many of the above Linux distributions, without having to figure out how to flash them individually and juggle with many microSD cards.


All other contact information is listed on the [https://leste.maemo.org/Main_Page main page] of the Maemo wiki. You should [https://github.com/maemo-leste/bugtracker/issues submit bug reports] on github. To track known issues, you may use these search terms: [https://github.com/maemo-leste/bugtracker/issues?utf8=%E2%9C%93&q=is%3Aissue+is%3Aopen+pinephone pinephone], [https://github.com/maemo-leste/bugtracker/issues?utf8=%E2%9C%93&q=is%3Aissue+is%3Aopen+pine64 pine64]. Learn about [https://leste.maemo.org/Development development], [https://leste.maemo.org/Development/Porting_Packages porting packages], [https://leste.maemo.org/Development/Building_Packages building packages], [https://leste.maemo.org/Development/Tasks todo list], and general info on [https://wiki.debian.org/HowToPackageForDebian how to package for Debian]. Some tasks have funding available.
More information can be found at: https://xnux.eu/p-boot-demo/


== Nemo Mobile ==
== Nemo Mobile ==
Line 243: Line 212:
* ''' How to contribute and report defects '''
* ''' How to contribute and report defects '''
For more info please visit [https://github.com/neochapay/nemo-device-dont_be_evil neochapay's Github page]
For more info please visit [https://github.com/neochapay/nemo-device-dont_be_evil neochapay's Github page]
== KDE Neon ==
{{Hint|It is recommended to use Manjaro with Plasma Mobile instead, as development has shifted towards Manjaro.}}
Based on KDE Neon for the desktop, comes with Plasma Mobile.
* ''' Download location '''
Plasma mobile images can be found [https://images.plasma-mobile.org/pinephone/ here].
* ''' username/password '''
phablet/1234
* ''' What works, what does not work '''
* ''' How to contribute and report defects '''


== NixOS ==
== NixOS ==
Line 281: Line 234:
On [https://github.com/NixOS/mobile-nixos/issues the project's repository]. Please specify that you are using a PinePhone when reporting issues. Details about contributions and donations are on the [https://nixos.org/nixos/community.html NixOS website].
On [https://github.com/NixOS/mobile-nixos/issues the project's repository]. Please specify that you are using a PinePhone when reporting issues. Details about contributions and donations are on the [https://nixos.org/nixos/community.html NixOS website].


== LuneOS ==
== OpenMandriva ==
<!--http://files.pine64.org/sw/pine64_installer/json/luneos.jpg-->
https://www.openmandriva.org/en/news/article/openmandriva-lx-4-2-rc-available-for-testing
 
https://sourceforge.net/projects/openmandriva/files/release/4.2/RC/Pinephone/
 
== openSUSE ==
[[File:SLEM-OS-logo.png|100px]]


Based on WebOS by LG, comes with Luna Next desktop environment.
openSUSE Tumbleweed running on the PinePhone.


* ''' Download location '''
* ''' Download location '''
[http://build.webos-ports.org/luneos-testing/images/pinephone/ LuneOS test image for PinePhone]
Offical openSUSE images can be found [https://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/PinePhone/images/ here].
Tofe recommends using bmaptool ; for example "bmaptool copy http://build.webos-ports.org/luneos-testing/images/pinephone/luneos-dev-image-pinephone-testing-0-15.rootfs.wic.gz /dev/mmcblk0". Rename .wic file to .img for standard dd usage.  
 
Nightly images [https://download.opensuse.org/repositories/home:/alefnode:/devel:/ARM:/Factory:/Contrib:/PinePhone/images/ here].
 
CI/CD for nightly slemos images [https://jenkins.alefnode.com/job/public/job/slemos-imagebuilder/ here].


* ''' username/password '''
* ''' username/password'''
The default login is pine/1234 but the root user does not have a password (use sudo).


* ''' What works, what does not work '''
* ''' What works, what does not work '''
You can find all information about the progress of the project [https://gitlab.com/slem.os/slem.os/-/blob/master/CHANGELOG.md here].
== postmarketOS ==
[[File:PostmarketOS-logo.png|100px]]


* ''' How to contribute and report defects '''
postmarketOS is a preconfigured version of [https://www.alpinelinux.org/ Alpine Linux] for mobile devices that offers a choice of several desktop environments including Plasma Mobile and Phosh.


== Sxmo ==
* ''' Download location '''
Rather than downloading a demo image, postmarketOS [https://wiki.postmarketos.org/wiki/Installation_guide recommends the use of their script], pmbootstrap, that can tailor build your SD card for you.


A collection of Suckless programs to create a mobile UI. Based on postmarketOS
Note: pmbootstrap offers an option [https://wiki.postmarketos.org/wiki/PINE64_PinePhone_(pine64-pinephone)#Installation to install to the eMMC].


* ''' Download location '''
Demo images can be found [http://images.postmarketos.org/pinephone/ here].
Sxmo images can be found [http://images.lrdu.org/pinephone/ here].


* ''' username/password '''
* ''' username/password '''
mo/mo
demo/147147 (for demo images only - when building an image with pmbootstrap you set your own username and password (the Phosh lock screen requires your password, but only presents a numeric keyboard, so you should use only numbers in your password).


* ''' What works, what does not work '''
* ''' What works, what does not work '''
See [https://wiki.postmarketos.org/wiki/PINE64_PinePhone_(pine64-pinephone) postmarketOS dedicated PinePhone wiki page]


PinePhone's backlight turns off at 2/10 brightness.
If you install Firefox browser (or are using a demo image that already has it installed) then [https://wiki.postmarketos.org/wiki/Firefox these hints] in the postmarketOS wiki are recommended.


* ''' How to contribute and report defects '''
* ''' How to contribute and report defects '''
[https://gitlab.com/postmarketOS/postmarketos/issues/3 postmarketOS issue tracker] for PinePhone support. See [https://wiki.postmarketos.org/wiki/Contributing postmarketOS wiki] for options to contribute.


All the contributing information is [https://git.sr.ht/~mil/sxmo-docs/tree/master/CONTRIBUTING.md here].
== SailfishOS ==
[[File:Sailfish_logo.png|150px]]
 
Sailfish OS is a Linux-based operating system based on open source projects such as Mer and including a closed source UI.


== openSUSE ==
* ''' Download location '''
[[File:SLEM-OS-logo.png|100px]]
The SailfishOS image is built on Gitlab CI. The latest image can be installed using the [https://raw.githubusercontent.com/sailfish-on-dontbeevil/flash-it/master/flash-it.sh flashing script].


openSUSE Tumbleweed running on the PinePhone.
The script downloads the image and bootloader from our CI, extracts everything and burns it onto the SD card. '''Note:''' The script will format and erase the SD card!


* ''' Download location '''
Instructions:
Offical openSUSE images can be found [https://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/PinePhone/images/ here].
# Download the flashing script
# Insert a microSD card in your device
# Make the script executable: <code>chmod +x flash-it.sh</code>
# Verify that you have the <code>bsdtar</code> package installed
# Execute it: <code>./flash-it.sh</code>
# Follow the instructions. Some commands in the script require root permissions (for example: mounting and flashing the SD card).
* ''' username/password '''


Nightly images [https://download.opensuse.org/repositories/home:/alefnode:/devel:/ARM:/Factory:/Contrib:/PinePhone/images/ here].
OR...when asked where to flash, type 'raw' and it will build the image on your pc/mac


CI/CD for nightly slemos images [https://jenkins.alefnode.com/job/public/job/slemos-imagebuilder/ here].
OR....download the .img from https://gitlab.com/as400l/pp-sailfishos-images


* ''' username/password'''
Set PIN on initialization.
The default login is pine/1234 but the root user does not have a password (use sudo).


* ''' What works, what does not work '''
* ''' What works, what does not work '''
You can find all information about the progress of the project [https://gitlab.com/slem.os/slem.os/-/blob/master/CHANGELOG.md here].
NB The first run sometimes stalls before the tutorial. Reboot and it starts from setting the security pin.
The homescreen may be locked unless you boot with a sim card inserted. An old expired sim will do. If you do not have a SIM card on hands, do NOT set a security code on first boot. When a screen with a loading circle is displayed, just left/right swipe it away.
 
May 4th 2020: 3.3.0.16 release. Nextcloud integration.
 
Sept 17. Calls work.....sort of. Volunteer troubleshooters required. 4G works. Nextcloud sync works. Camera is work-in-progress.
 
October 10. The most recent build still has call problems. The battery indicator stays at value on boot and the battery discharges very quickly. Apart from all that SFOS is still the snappiest most responsive UI, with none of the scaling and lagging problems that make phosh such a drag.
 
October 20. New build improves battery indicator but it's still erratic. Calls still problematic. No camera.
December 1. New image updated to 3.4.0.24. If you SSH, the user is "defaultuser" instead of "nemo".
On the pinephone the boot process still takes 2 or three attempts before getting to the enter security pin screen.
If you're not familiar with SFOS pay attention to the tutorial - the interface works great but isn't immediately obvious. If you are familiar with SF you can skip the tutorial by touching all 4 corners starting top left. There is a limited selection of apps available from the Jolla store, the vast majority are hosted on openrepos.net. The Storeman app for openrepos is now preinstalled, and also Webcat browser as the built in browser is not working at the moment.
 
* ''' How to contribute and report defects '''
 
See the [https://sailfishos.org/wiki/Collaborative_Development#Reporting_issues SailfishOS wiki] for links to their forum as well as info required when reporting an issue. See the [https://sailfishos.org/wiki/SailfishOS SailfishOS wiki] for options to contribute


== GloDroid ==
* ''' Notes '''
OTA is supported: <code>zypper refresh && zypper update</code> as root (<code>devel-su</code> to get root access). Things that need reflash are bootloader specific at the moment. If improvements like crust or changes of partition layout are added then you need to reflash.


{{warning|Available images are outdated and do not reflect the state of the current developments.}}
== Sxmo ==


A fully open source port of Android to the PinePhone
A collection of Suckless programs to create a mobile UI. Based on postmarketOS


* ''' Download location '''
* ''' Download location '''
Sxmo images can be found [http://images.lrdu.org/pinephone/ here].


https://github.com/GloDroid/glodroid_manifest/releases
* ''' username/password '''
mo/mo


* ''' username/password'''
* ''' What works, what does not work '''
* ''' What works, what does not work '''
Works: WiFi, screen dimming, touchscreen and charging work.
Don't work: Bluetooth, Telephony, GPS


== Multi-boot image ==
PinePhone's backlight turns off at 2/10 brightness.
 
* ''' How to contribute and report defects '''


The purpose of this image is for users to easily try many of the above Linux distributions, without having to figure out how to flash them individually and juggle with many microSD cards.
All the contributing information is [https://git.sr.ht/~mil/sxmo-docs/tree/master/CONTRIBUTING.md here].


More information can be found at: https://xnux.eu/p-boot-demo/
== Ubuntu Touch ==
[[File:Ubports-logo.png|100px]]


== Gentoo ==
A Mobile Version of the Ubuntu Operating System made and maintained by the UBports Community.


An unofficial Gentoo overlay with ebuilds for the PinePhone. There is no image - you'll be building it yourself, picking which kernel, bootloader and desktop environment you want to use.
Ubuntu touch is a mobile version of Ubuntu developed by the UBports community. Installation instructions can be found on [https://gitlab.com/ubports/community-ports/pinephone#how-do-i-install-ubuntu-touch-on-my-pinephone the UBports PinePhone project]. There is also a [https://github.com/goddard/pinephone/ script] to download the latest image and flash to your PinePhone. In the future, Ubuntu Touch will be able to be installed onto the PinePhone with the [https://devices.ubuntu-touch.io/installer UBports installer] GUI tool.


* ''' Download location '''
* ''' Download location '''
[https://gitlab.com/ubports/community-ports/pinephone#how-do-i-install-ubuntu-touch-on-my-pinephone UBports PinePhone project]
* ''' username/password '''
Set up during boot
* ''' What works, what does not work '''
Scroll down to the bottom of [https://gitlab.com/ubports/community-ports/pinephone this page].


https://gitlab.com/bingch/gentoo-overlay/-/blob/master/README.md
* ''' How to contribute and report defects '''
See [https://gitlab.com/ubports/community-ports/pinephone UBports gitlab page]. See [https://ubports.com/foundation/sponsors UBports website] for how to donate.


= Factory Test OS =
= Factory Test OS =