Difference between revisions of "PinePhone Software Releases"

From PINE64
Jump to navigation Jump to search
(Undo revision 7321 by EnderNightLord (talk))
Tag: Undo
m (→‎Manjaro ARM: Updated forum links for Phosh and Plasma releases)
(152 intermediate revisions by 26 users not shown)
Line 1: Line 1:
This page contains a list of all available releases for the PinePhone as well as links to further resources.
This page contains a list of all available releases for the [[PinePhone]] as well as links to other resources.


See [[PinePhone Installation Instructions]] on how to install the operating systems.
See [[PinePhone Installation Instructions]] on how to install the operating systems. However, if your phone came preloaded with software, Please see [[PinePhone Updating Instructions]]


Note: Some releases may not have a good setup for the backlight at low brightness. If configured too low the backlight shuts down completely, but the screen is still displayed and usable in bright front-light.
{{Hint| Note: Some releases may not have a good setup for the backlight at low brightness. If configured too low the backlight shuts down completely, but the screen is still displayed and usable in bright front-light.}}


= Software Releases =
= Software Releases =
This is a list of OSes that specifically support the PinePhone, but as support is included in Mainline Linux, in principle any ARM Linux OS can be used, if possible required patches are included.
This is a list of OSes that specifically support the PinePhone, but as support is included in Mainline Linux, in principle any ARM Linux OS can be used, if possible required patches are included.


== postmarketOS ==
== Arch Linux ARM ==
[[File:PostmarketOS-logo.png|100px]]
<div style=float:right>[[File:Archlinux-logo.png|100px]]</div>
 
(Unofficial) Arch Linux ARM with choice of Phosh UI or barebones, currently being maintained by the [https://danctnix.org/ DanctNIX] community (GitHub [https://github.com/DanctNIX/danctnix 1] [https://github.com/dreemurrs-embedded 2]).
 
'''Download location'''
 
Get the latest image here: https://github.com/dreemurrs-embedded/Pine64-Arch/releases
 
'''username/password'''
 
alarm/123456
 
'''What works, what does not work'''
 
Most of the things now works, there are some minor issues with [[Crust]].
 
'''How to contribute and report defects'''
 
Feel free to send us [https://github.com/dreemurrs-embedded/Pine64-Arch/pulls pull requests] and report [https://github.com/dreemurrs-embedded/Pine64-Arch/issues issues] on [https://github.com/dreemurrs-embedded/Pine64-Arch GitHub].
 
== ExpidusOS ==
 
A fork of Void Linux with a custom fork of XFCE as the default desktop environment, developed by [https://midstall.com/ Midstall Software].
 
* [https://expidusos.com ExpidusOS official website]
* [https://wiki.expidusos.com/index.php/Main_Page ExpidusOS Wiki]
* [https://discord.gg/GVfBF2w Midstall Software Discord server]
 
'''Download location'''
 
Check the [https://expidusos.com/download download page] for that latest version, or the [https://build.expidusos.com/ image file list] for all versions, look for the file name that starts with "pinephone".
 
'''username/password'''
 
expidus/expidus


postmarketOS is a preconfigured version of [https://www.alpinelinux.org/ Alpine Linux] for mobile devices that offers a choice of several desktop environments including Plasma Mobile and Phosh.
'''What works, what does not work'''


* ''' Download location '''
The ExpidusOS Wiki has a page detailing [https://wiki.expidusos.com/index.php/Device:PinePhone supported features].
Rather than downloading a demo image, postmarketOS [https://wiki.postmarketos.org/wiki/Installation_guide recommends the use of their script], pmbootstrap, that can tailor build your SD card for you.


Note: pmbootstrap offers an option [https://wiki.postmarketos.org/wiki/PINE64_PinePhone_(pine64-pinephone)#Installation to install to the eMMC].
'''How to contribute and report defects'''


Demo images can be found [http://images.postmarketos.org/pinephone/ here].
GitHub: https://github.com/ExpidusOS


* ''' username/password '''
== Fedora ==
demo/147147 (for demo images only - when building an image with pmbootstrap you set your own username and password (the Phosh lock screen requires your password, but only presents a numeric keyboard, so you should use only numbers in your password).
<div style=float:right>[[File:Fedora-logo.png|100px]]</div>


* ''' What works, what does not work '''
An (unofficial) vanilla Fedora rawhide build for aarch64 with megi's kernel and [https://copr.fedorainfracloud.org/coprs/njha/mobile/packages/ some additional packages] to tie it all together. It aims to eventually be an upstream part of the Fedora project, rather than a phone-specific distribution.
See [https://wiki.postmarketos.org/wiki/PINE64_PinePhone_(pine64-pinephone) postmarketOS dedicated PinePhone wiki page]


If you install Firefox browser (or are using a demo image that already has it installed) then [https://wiki.postmarketos.org/wiki/Firefox these hints] in the pmOS wiki are recommended.
See [https://forum.pine64.org/showthread.php?tid=9347 this thread in the forum].


* ''' How to contribute and report defects '''
'''Download location'''
[https://gitlab.com/postmarketOS/postmarketos/issues/3 postmarketOS issue tracker] for PinePhone support. See [https://wiki.postmarketos.org/wiki/Contributing  postmarketOS wiki] for options to contribute.


== Ubuntu Touch by UBports ==
[https://github.com/nikhiljha/pp-fedora-sdsetup/releases/ flashable images] or [https://github.com/nikhiljha/pp-fedora-sdsetup/ build scripts]
[[File:Ubports-logo.png|100px]]


A Mobile Version of the Ubuntu Operating System made and maintained by the UBports Community.
There is also an FTP server with full a full Fedora 34 workstation build with phosh: ftp://pine.warpspeed.dk/nightly/pinephone/ (Mount this with something like Nautilus)


Ubuntu touch is a mobile version of Ubuntu developed by the UBports community. Installation instructions can be found on [https://gitlab.com/ubports/community-ports/pinephone#how-do-i-install-ubuntu-touch-on-my-pinephone the UBports PinePhone project]. There is also a [https://github.com/goddard/pinephone/ script] to download the latest image and flash to your PinePhone. In the future, Ubuntu Touch will be able to be installed onto the PinePhone with the [https://devices.ubuntu-touch.io/installer UBports installer] GUI tool.
'''username/password'''


* ''' Download location '''
pine/123456
[https://gitlab.com/ubports/community-ports/pinephone#how-do-i-install-ubuntu-touch-on-my-pinephone UBports PinePhone project]


* ''' username/password '''
'''What works, what does not work'''
Set up during boot


* ''' What works, what does not work '''
WiFi, Bluetooth, SMS, Data, Calls all work!
Scroll down to the bottom of [https://gitlab.com/ubports/community-ports/pinephone this page].


* ''' How to contribute and report defects '''
There are still a few bugs though, and [https://xnux.eu/devices/pine64-pinephone.html#toc-feature-driver-support-matrix some features don't have driver support yet] on any PinePhone distribution.  
See [https://gitlab.com/ubports/community-ports/pinephone UBports gitlab page]. See [https://ubports.com/foundation/sponsors UBports website] for how to donate.


== Mobian ==
'''How to contribute and report defects'''
[[File:Debian-logo.png]]


An unofficial Debian build for ARM64 running with the Phosh user interface (developed by Purism, Phosh uses Wayland instead of Xorg). The base system is pure Debian, with only the GUI applications and a few others (ModemManager, WiFi chip firmware) being built from modified sources (as well as the kernel and u-boot). Current version is Debian Bullseye.
Please send your bug reports to [https://github.com/nikhiljha/pp-fedora-sdsetup/issues the project's issue tracker]. Be sure to include logs if applicable! Send us merge requests on [https://github.com/nikhiljha/pp-fedora-sdsetup/ Github].


* ''' Download location '''
== Gentoo ==
[http://images.mobian-project.org/ Mobian downloadable images]
<div style=float:right>[[File:GentooLogo.png|100px]]</div>


Don't forget to extract the image before installing:  
There are unofficial Gentoo overlays with ebuilds for the PinePhone. There are no images - you'll be building it yourself, picking which kernel, bootloader and desktop environment you want to use.
$ gzip -d Downloads/mobian-pinephone-*.img.gz
You will be using the [https://wiki.gentoo.org/wiki/Project:ARM64 arm64] version of Gentoo.  


See the [https://wiki.mobian-project.org/doku.php?id=install project page] for specific installation instructions.
'''Documentation'''


* ''' username/password '''
https://stealthgun.tweakblogs.net/blog/19336/gentoo-on-a-pinephone
mobian/1234


* ''' What works, what does not work '''
https://wiki.gentoo.org/wiki/User:Dr41nU/PinePhone


See [https://gitlab.com/mobian1/mobian-recipes/-/blob/master/README.md the project's README file] or [https://wiki.mobian-project.org/doku.php?id=pinephone the wiki]for most up to date status.
https://wiki.gentoo.org/wiki/PinePhone (incomplete)


Check [https://gitlab.com/a-wai/debos-pinephone/-/issues bug tracker] for known issues. Questions? Ask on our [https://forum.pine64.org/showthread.php?tid=9016 thread].
'''Overlay locations'''


* ''' How to contribute and report defects '''
https://gitlab.com/bingch/gentoo-overlay/
It is recommended that you log your bug reports in [https://gitlab.com/mobian1/issues the project's issue tracker]. As a general rule, issues with third-party apps (even the default ones) should be reported upstream. A Mobian issue would be related to getting the hardware to work on the PinePhone, but if unsure where the issue should be reported just open a ticket or ask. Feel free to pick an open issue to work on, or send a merge request on [https://gitlab.com/mobian1 Gitlab].


* ''' Notes '''
https://github.com/stealthgun/gjdwebserver-overlay/
See [[Mobian for PinePhone]] or [https://wiki.mobian-project.org/doku.php?id=start the wiki] for additional information regarding screen resolution, USB networking, WiFi hotspot, Chatty and the repository.


== SailfishOS ==
== GloDroid ==
<!--http://files.pine64.org/sw/pine64_installer/json/sailfishos.png-->


Sailfish OS is a Linux-based operating system based on open source projects such as Mer and including a closed source UI.
{{warning|Available images are outdated and do not reflect the state of the current developments.}}


* ''' Download location '''
A fully open source port of Android to the PinePhone
The SailfishOS image is built on Gitlab CI. The latest image can be installed using the [https://raw.githubusercontent.com/sailfish-on-dontbeevil/flash-it/master/flash-it.sh flashing script].


The script downloads the image and bootloader from our CI, extracts everything and burns it onto the SD card. '''Note:''' The script will format and erase the SD card!
'''Download location'''


Instructions:
https://github.com/GloDroid/glodroid_manifest/releases
# Download the flashing script
# Insert a microSD card in your device
# Make the script executable: <code>chmod +x flash-it.sh</code>
# Verify that you have the <code>bsdtar</code> package installed
# Execute it: <code>./flash-it.sh</code>
# Follow the instructions. Some commands in the script require root permissions (for example: mounting and flashing the SD card).
* ''' username/password '''


Set PIN on initialization.
'''What works, what does not work'''


* ''' What works, what does not work '''
Works: WiFi, screen dimming, touchscreen and charging work.
NB The first run always stalls before the tutorial. Reboot and it starts from setting the security pin.
Don't work: Bluetooth, Telephony, GPS
The homescreen may be locked unless you boot with a sim card inserted.


May 4th 2020: The SFOS image is now the latest 3.3.0.16 release. This release of SF has Nextcloud integration.
== LuneOS ==


Sept 17. Calls work.....sort of. Volunteer troubleshooters required. 4G works. Nextcloud sync works. Camera still WIP.
LuneOS is a open source mobile operating system based on [https://www.webosose.org/ webOS Open Source Edition]([https://github.com/webosose GitHub], previously known as [https://github.com/openwebos Open webOS]) by LG, comes with [https://webos-ports.org/wiki/Luna_Next Luna Next] UI, currently developed by [https://www.webos-ports.org/wiki/Main_Page WebOS Ports] community.
If you're not familiar with SFOS pay attention to the tutorial - the interface works great but isn't immediately obvious. If you are familiar with SF you can skip the tutorial by touching all 4 corners starting top left. There is a limited selection of apps available from the Jolla store, the vast majority are hosted on openrepos.net. The Storeman app for openrepos is now preinstalled, and also Webcat browser as the built in browser is not working at the moment.


* ''' How to contribute and report defects '''
* [https://webos-ports.org/wiki/Pinephone_Info WebOS-Ports Pinephone Wiki page]


See the [https://sailfishos.org/wiki/Collaborative_Development#Reporting_issues SailfishOS wiki] for links to their forum as well as info required when reporting an issue. See the [https://sailfishos.org/wiki/SailfishOS SailfishOS wiki] for options to contribute
'''Download location'''


* ''' Notes '''
[http://build.webos-ports.org/luneos-testing/images/pinephone/ LuneOS test image for PinePhone]
OTA is supported: <code>zypper refresh && zypper update</code> as root (<code>devel-su</code> to get root access). Things that need reflash are bootloader specific at the moment. If improvements like crust or changes of partition layout are added then you need to reflash.


== PureOS ==
It is recommended to use <i>bmaptool</i>, which is faster than dd, and can decompress archived image files on-the-fly.
[[File:Pureos.png]]
 
Syntax is:


PureOS is a GNU/Linux distribution focusing on privacy and security, using the GNOME desktop environment. It is developed and maintained by Purism.
<code>bmaptool copy [from] [to]</code>


* ''' Download location '''
For example:
This is an unofficial/unsupported PinePhone port by ''mozzwald'' and maintained by clover that can be downloaded [https://www.ironrobin.net/pureos/droppy/#/Images here].


* ''' source code '''
<code>bmaptool copy http://build.webos-ports.org/luneos-testing/images/pinephone/luneos-dev-image-pinephone-testing-0-140.rootfs.wic.gz /dev/mmcblk0</code>
If you want to report a bug or look at what goes into the PinePhone build of PureOS, visit the Git [https://www.ironrobin.net/pureos/git/clover/pinephone/ repository].


* ''' username/password '''
.wic file can be treated as .img file when flashing. You may rename .wic file to .img when using GUI tools that require .img files.
purism/123456


* ''' Build instructions '''
== Maemo Leste ==
If you want to build it yourself you can follow the instructions posted [https://mozzwald.com/pp/pureos-pinephone-build-instructions.txt here].
<div style=float:right>[[File:Maemoleste-logo.png|100px]]</div>


== Fedora ==
[https://en.wikipedia.org/wiki/Maemo Maemo] is a trimmed-down version of Debian for mobile devices, originally a collaboration between Nokia and many open source projects (the [http://maemo.org/intro/ Maemo community]) before Nokia abandoned it. The community now takes full responsibility in developing fully open source Maemo for a variety of mobile devices.
[[File:Fedora-logo.png|100px]]


An (unofficial) vanilla Fedora rawhide build for aarch64 with megi's kernel and [https://copr.fedorainfracloud.org/coprs/njha/mobile/packages/ some additional packages] to tie it all together. It aims to eventually be an upstream part of the Fedora project, rather than a phone-specific distribution.
The new version Maemo 7 "Leste" is an ARM64 port of [https://devuan.org/ Devuan] (Debian without systemd) and runs the mainline Linux kernel. The default user interface stack is [https://en.wikipedia.org/wiki/Hildon Hildon], [https://en.wikipedia.org/wiki/X.Org_Server Xorg], [https://en.wikipedia.org/wiki/Matchbox_(window_manager) Matchbox WM], and [https://en.wikipedia.org/wiki/GTK GTK]. The current version is Devuan Ascii (Debian Stretch) and they are working on an upgrade to Devuan Beowulf (Debian Buster) as well as simultaneous support for both Devuan and Debian. In addition to the main repository, they [https://maemo-leste.github.io/maemo-leste-repositories-and-community-packages.html announced] a [https://github.com/maemo-leste-extras/bugtracker community repository]. To keep updated they use automation in their package maintenance with [https://github.com/maemo-leste/jenkins-integration jenkins] (similar to [https://www.debian.org/devel/buildd/ debian's buildd]). Porting packages to Maemo Leste is basically a simple matter of porting to arm64 version of Debian/Devuan, which benefits both projects.


See [https://forum.pine64.org/showthread.php?tid=9347 this thread in the forum].
More detailed information can be found on [https://leste.maemo.org/Main_Page the Maemo Leste wiki], or follow [https://maemo-leste.github.io/ announcements on their website], and check out [https://leste.maemo.org/Leste_FAQ Frequently Asked Questions].  


* ''' Download location '''
'''Download location'''
[https://github.com/nikhiljha/pp-fedora-sdsetup/releases/ flashable images] or [https://github.com/nikhiljha/pp-fedora-sdsetup/tree/image build scripts]


* ''' username/password '''
[http://maedevu.maemo.org/images/pinephone/ Maemo Leste test builds]. There is also an [https://github.com/maemo-leste/image-builder image builder], see their wiki for instructions on how to [https://leste.maemo.org/Image_Builder build a custom image].
pine/1111


* ''' What works, what does not work '''
'''username/password'''
WiFi, Bluetooth, SMS, Data, Calls all work! There are still a few bugs though, and [some features don't have driver support yet https://xnux.eu/devices/pine64-pinephone.html#toc-feature-driver-support-matrix] on any PinePhone distribution.


* ''' How to contribute and report defects '''
root/toor
Please send your bug reports at [https://github.com/nikhiljha/pp-fedora-sdsetup/issues the project's issue tracker]. Be sure to include logs if applicable! Send us merge requests on [https://github.com/nikhiljha/pp-fedora-sdsetup/ Github].


== Arch Linux ARM ==
You may use "sudo" directly.
[[File:Archlinux-logo.png|100px]]


(Unofficial) Arch Linux ARM with Phosh as the UI selection, it's usable on the PinePhone and currently being maintained by the DanctNIX community.
'''What works, what does not work'''


* ''' Download location '''
For current status and workarounds please read their [https://leste.maemo.org/PinePhone PinePhone wiki page], and update as necessary (make sure to notify them of new issues by leaving a report on the project's  Github page, see below).
Get the latest image here: https://github.com/dreemurrs-embedded/Pine64-Arch/releases


* ''' username/password '''
'''How to contribute and report defects'''
alarm/123456


* ''' What works, what does not work '''
Most discussion occurs at <i>#maemo-leste</i> on <i>irc.libera.chat</i>. The Maemo website also has an [https://talk.maemo.org/showthread.php?p=1565822 ongoing forum thread] for feedback.
Most of the things now works, there are some minor issues with crust.


* ''' How to contribute and report defects  '''
All other contact information is listed on the [https://leste.maemo.org/Main_Page main page] of the Maemo wiki. You should [https://github.com/maemo-leste/bugtracker/issues submit bug reports] on github. To track known issues, you may use these search terms: [https://github.com/maemo-leste/bugtracker/issues?utf8=%E2%9C%93&q=is%3Aissue+is%3Aopen+pinephone pinephone], [https://github.com/maemo-leste/bugtracker/issues?utf8=%E2%9C%93&q=is%3Aissue+is%3Aopen+pine64 pine64]. Learn about [https://leste.maemo.org/Development development], [https://leste.maemo.org/Development/Porting_Packages porting packages], [https://leste.maemo.org/Development/Building_Packages building packages], [https://leste.maemo.org/Development/Tasks todo list], and general info on [https://wiki.debian.org/HowToPackageForDebian how to package for Debian]. Some tasks have funding available.
Feel free to send us merge requests and report issues on [https://github.com/dreemurrs-embedded/Pine64-Arch/pulls GitHub].


== Manjaro ARM ==
== Manjaro ARM ==
[[File:Manjaro-logo.svg|100px]]
<div style=float:right>[[File:Manjaro-logo.svg|100px]]</div>


Manjaro is a user-friendly Linux distribution based on the independently developed Arch operating system with the Plasma Mobile desktop environment.
Manjaro is a user-friendly Linux distribution based on the independently developed Arch operating system with the Plasma Mobile desktop environment.


* ''' Download location '''
'''Download location'''
 
*Phosh: [https://github.com/manjaro-pinephone/phosh Stable] / [https://github.com/manjaro-pinephone/phosh-dev Dev]
*Plasma Mobile: [https://github.com/manjaro-pinephone/plasma-mobile Stable] / [https://github.com/manjaro-pinephone/plasma-mobile-dev Dev]
*Lomiri: [https://github.com/manjaro-pinephone/lomiri-dev Dev] (Not maintained)
 
'''username/password'''
 
manjaro/123456
 
root/root
 
'''What works, what does not work'''
 
{{Hint| Note: The Phosh image the boot will load at a TTY login prompt for multiple minutes at the first boot.}}
 
See Manjaro's release announcements on their forum.
 
Recent ones: [https://forum.manjaro.org/t/manjaro-arm-beta12-with-phosh-pinephone/73099 Phosh], [https://forum.manjaro.org/t/manjaro-arm-beta5-with-plasma-mobile-pinephone/69318 Plasma] and [https://forum.manjaro.org/t/manjaro-arm-alpha3-with-lomiri-pinephone/49923 Lomiri].
 
'''How to contribute and report defects'''
 
See the end of the [https://forum.manjaro.org/t/manjaro-arm-beta7-with-phosh-pinephone/58901 announcement].
 
== Mobian ==
<div style=float:right>[[File:Debian-logo.png]]</div>
 
An unofficial Debian build for ARM64 running with the Phosh user interface (developed by Purism, Phosh uses Wayland instead of Xorg). The base system is pure Debian, with only the GUI applications and a few others (ModemManager, WiFi chip firmware) being built from modified sources (as well as the kernel and u-boot). Current version is Debian Bullseye.
 
'''Download location'''
 
[https://images.mobian-project.org/pinephone/nightly/ Nightly] / [https://images.mobian-project.org/pinephone/installer/ Installer] / [https://images.mobian-project.org/pinephone/ Stable]


Phosh: [https://forum.manjaro.org/t/manjaro-arm-alpha2-with-phosh-pinephone/148 See Manjaro forum announcement of Alpha2 version]
Don't forget to extract the image before installing:


Plasma: [https://osdn.net/projects/manjaro-arm/storage/pinephone/plasma-mobile/alpha7/ Download link for the Alpha7 version of the Plasma Mobile release]
<code>$ gzip -d Downloads/mobian-pinephone-*.img.gz</code>


Lomiri: [https://osdn.net/projects/manjaro-arm/storage/pinephone/lomiri/ Download link for the Alpha1 version of the Lomiri release]
See the [https://wiki.mobian-project.org/doku.php?id=install project page] for specific installation instructions.


* ''' username/password '''
'''username/password'''
** manjazo/123456
** root/root


* ''' What works, what does not work '''
mobian/1234
See Manjaro's [https://forum.manjaro.org/t/manjaro-arm-alpha5-for-pinephone-testing-branch/136614 announcement]. In particular, phone calls do not yet work from the Phone application.


* ''' How to contribute and report defects '''
'''What works, what does not work'''


See the end of the [https://forum.manjaro.org/t/manjaro-arm-alpha5-for-pinephone-testing-branch/136614 announcement].
See [https://gitlab.com/mobian1/mobian-recipes/-/blob/master/README.md the project's README file] or [https://wiki.mobian-project.org/doku.php?id=pinephone the wiki]for most up to date status.


== Maemo Leste ==
Check [https://gitlab.com/groups/mobian1/-/issues bug tracker] for known issues. Questions? Ask on our [https://forum.pine64.org/showthread.php?tid=9016 thread].
<!--http://files.pine64.org/sw/pine64_installer/json/maemo_leste.png-->


[https://en.wikipedia.org/wiki/Maemo Maemo] is a trimmed-down version of Debian for mobile devices, originally a collaboration between Nokia and many open source projects (the [http://maemo.org/intro/ Maemo community]) before Nokia abandoned it. The community now takes full responsibility in developing fully open source Maemo for a variety of mobile devices.
'''How to contribute and report defects'''


The new version Maemo 7 "Leste" is an ARM64 port of [https://devuan.org/ Devuan] (Debian without systemd) and runs the mainline Linux kernel. The default user interface stack is [https://en.wikipedia.org/wiki/Hildon Hildon], [https://en.wikipedia.org/wiki/X.Org_Server Xorg], [https://en.wikipedia.org/wiki/Matchbox_(window_manager) Matchbox WM], and [https://en.wikipedia.org/wiki/GTK GTK]. The current version is Devuan Ascii (Debian Stretch) and they are working on an upgrade to Devuan Beowulf (Debian Buster) as well as simultaneous support for both Devuan and Debian. In addition to the main repository, they [https://maemo-leste.github.io/maemo-leste-repositories-and-community-packages.html announced] a [https://github.com/maemo-leste-extras/bugtracker community repository]. To keep updated they use automation in their package maintenance with [https://github.com/maemo-leste/jenkins-integration jenkins] (similar to [https://www.debian.org/devel/buildd/ debian's buildd]). Porting packages to Maemo Leste is basically a simple matter of porting to arm64 version of Debian/Devuan, which benefits both projects.
It is recommended that you log your bug reports in [https://gitlab.com/mobian1/issues the project's issue tracker]. As a general rule, issues with third-party apps (even the default ones) should be reported upstream. A Mobian issue would be related to getting the hardware to work on the PinePhone, but if unsure where the issue should be reported just open a ticket or ask. Feel free to pick an open issue to work on, or send a merge request on [https://gitlab.com/mobian1 Gitlab].


More detailed information can be found on [https://leste.maemo.org/Main_Page the Maemo Leste wiki], or follow [https://maemo-leste.github.io/ announcements on their website], and check out [https://leste.maemo.org/Leste_FAQ Frequently Asked Questions].
'''Notes'''


* ''' Download location '''
See [[Mobian for PinePhone]] or [https://wiki.mobian-project.org/doku.php?id=start the wiki] for additional information regarding screen resolution, USB networking, WiFi hotspot, Chatty and the repository.
[http://maedevu.maemo.org/images/pinephone/ Maemo Leste test builds]. There is also an [https://github.com/maemo-leste/image-builder image builder], see their wiki for instructions on how to [https://leste.maemo.org/Image_Builder build a custom image].


* ''' username/password '''
== Multi-boot demo image ==
root/toor


You may use "sudo" directly.
{{Warning| This is an demo image for testing different OSes before installing a regular image. It is highly discouraged attempting to use the image productively. The kernel is shared across the different OSes and is not being updated.}}


* ''' What works, what does not work '''
The purpose of this image is for users to easily try many of the above Linux distributions, without having to figure out how to flash them individually and juggle with many microSD cards.
For current status and work arounds please read their [https://leste.maemo.org/PinePhone PinePhone wiki page], and update as necessary (make sure to notify them of new issues by leaving a report on their github, see below).


* ''' How to contribute and report defects '''
* More information can be found at: https://xnux.eu/p-boot-demo/
Most discussion occurs at #maemo-leste on freenode IRC. The Maemo website also has an [https://talk.maemo.org/showthread.php?p=1565822 ongoing forum thread] for feedback about Maemo Leste on the PinePhone BraveHeart edition.
* Git repo: https://megous.com/git/pinephone-multi-boot/
* [https://forum.pine64.org/showthread.php?tid=11347 Discussion on the forum]


All other contact information is listed on the [https://leste.maemo.org/Main_Page main page] of the Maemo wiki. You should [https://github.com/maemo-leste/bugtracker/issues submit bug reports] on github. To track known issues, you may use these search terms: [https://github.com/maemo-leste/bugtracker/issues?utf8=%E2%9C%93&q=is%3Aissue+is%3Aopen+pinephone pinephone], [https://github.com/maemo-leste/bugtracker/issues?utf8=%E2%9C%93&q=is%3Aissue+is%3Aopen+pine64 pine64]. Learn about [https://leste.maemo.org/Development development], [https://leste.maemo.org/Development/Porting_Packages porting packages], [https://leste.maemo.org/Development/Building_Packages building packages], [https://leste.maemo.org/Development/Tasks todo list], and general info on [https://wiki.debian.org/HowToPackageForDebian how to package for Debian]. Some tasks have funding available.
==== megi 15-in-1 multi boot Image [SD Boot] [20210602] ====
* DD image to microSD card and boot.
* This is also a good build for charging depleted battery. Just boot up this build with power supply connected, keep the PinePhone charging for 3 hours at power down stage.  
* For more info on this build, please visit [https://xnux.eu/p-boot-demo/ PinePhone multi-distro demo image site]
* DD image for 16GB and above microSD card
** [https://files.pine64.org/os/PinePhone/Multi/p-boot-multi-2021-06-02.img.gz Direct download from pine64.org]
*** MD5 (GZip file): 2abdaafb01dd7519f678b5a7c6538493
*** File Size: 6.8GB


== Nemo Mobile ==
== Nemo Mobile ==
<!--http://files.pine64.org/sw/pine64_installer/json/nemo_mobile.png-->
<div style=float:right>[[File:nemo_mobile.png|right|100px]]</div>
Nemo Mobile is the open source build of Sailfish OS with a open source UI called [http://nemomobile.net/glacier-home/ Glacier] ([https://wiki.merproject.org/wiki/Nemo/Glacier Mer Wiki]), now [http://nemomobile.net/pages/Hello_manjaro/ based on Manjaro]. See their website [https://nemomobile.net/ Nemo Mobile UX team] and [https://wiki.merproject.org/wiki/Nemo Mer Wiki page].
 
You can either install Nemo on any device that already runs Sailfish, or flash a prebuilt image to SD card/emmc on the PinePhone to install.
 
'''Download location'''
 
{{Hint| Note: See their website for the newest release and installation guides.}}
 
Prebuilt images:


Nemo Mobile is the open source build of Sailfish OS, see the new website nemomobile.net.
First devel image for Manjaro (April 1, 2021):


You can install Nemo on any device that runs Sailfish, see the above website for details. Or you can flash the image to SD card/emmc on the PinePhone, download here https://yadi.sk/d/8oSZp-frGidscw (requires Yandex Disk account).
* Offical blog post: [https://nemomobile.net/pages/Hello_manjaro/ First devel image for manjaro]
* Image locations:
** devel: https://img.nemomobile.net/devel/
** ?: https://img.nemomobile.net/2021.05/
* Packages: https://img.nemomobile.net/manjaro/05.2020/stable/


* ''' Download location '''
Nemo with Glacier UX v0.8 (April 27, 2020):
Download location is [https://github.com/neochapay/nemo-device-dont_be_evil/ here on GitHub]. The latest version is not an image file and therefore not for beginners!


Alternative easy installation method: install Sailfish on your PP first (follow instructions on this page under Sailfish). Enable developer mode.
* Offical blog post: [https://nemomobile.net/pages/Nemo_For_pinephone/ Nemo for PinePhone v0.8]
In the terminal run as root (devel-su):
* rootfs image: https://yadi.sk/d/VAbtKV-Hnql60g
* 2GB sdcard image: https://yadi.sk/d/8oSZp-frGidscw


ssu ar nemo-devel-ux http://repo.merproject.org/obs/home:/neochapay:/nemo-ux/sailfish_latest_armv7hl/
Install Nemo on Sailfish:


then
Install Sailfish on your PP first (follow instructions on the [[PinePhone_Software_Releases#Sailfish_OS|Sailfish]] section on this page).
pkcon refresh


then install the nemo-specific Glacier packages:
Enable developer mode. In the terminal, run as root (`devel-su`):


pkcon install lipstick-glacier-home-qt5
<code>ssu ar nemo-devel-ux http://repo.merproject.org/obs/home:/neochapay:/nemo-ux/sailfish_latest_armv7hl/ </code>


If necessary, reboot.
then:


* ''' username/password '''
<code>pkcon refresh </code>


* ''' What works, what does not work '''
then install the nemo-specific Glacier packages:
Scroll down the page [https://github.com/neochapay/nemo-device-dont_be_evil/ here].


* ''' How to contribute and report defects '''
<code>pkcon install lipstick-glacier-home-qt5 </code>
For more info please visit [https://github.com/neochapay/nemo-device-dont_be_evil neochapay's Github page]


== KDE Neon ==
If necessary, reboot.
<!--http://files.pine64.org/sw/pine64_installer/json/plasma_mobile.png-->


Based on KDE Neon for the desktop, comes with Plasma Mobile.
'''What works, what does not work'''


* ''' Download location '''
For the newer devel image based on Manjaro, [https://twitter.com/neochapay/status/1374029467526500355 Wi-Fi and Bluetooth works].
Plasma mobile images can be found [https://images.plasma-mobile.org/pinephone/ here].


* ''' username/password '''
For the older Nemo with Glacier UX v0.8, voicecalls, sound and cameras do not work by default, see its blog post and GitHub repo readme.
phablet/1234


* ''' What works, what does not work '''
'''How to contribute and report defects'''


* ''' How to contribute and report defects '''
For the Nemo Mobile UX itself:
* GitHub issues: https://github.com/nemomobile-ux/main/issues
 
For hardware:
* GitHub issues: https://github.com/neochapay/nemo-device-dont_be_evil/issues


== NixOS ==
== NixOS ==
<!--http://files.pine64.org/sw/pine64_installer/json/nixos.png-->
<div style=float:right>[[File:nixos.png|right|100px]]</div>
NixOS support is handled through the Mobile NixOS project.


''NixOS support is handled through the Mobile NixOS project.''
* [https://mobile.nixos.org/ Project home page]


* [https://mobile.nixos.org/ Project home page]
* [https://github.com/NixOS/mobile-nixos Source code repository]
* [https://github.com/NixOS/mobile-nixos Source code repository]


There is no pre-built complete image. For now users are expected to follow the instructions in the [https://mobile.nixos.org/getting-started.html Getting Started page], and on [https://mobile.nixos.org/devices/pine64-pinephone-braveheart.html the device's page].
There is no pre-built complete image. For now users are expected to follow the instructions in the [https://mobile.nixos.org/getting-started.html Getting Started page], and on [https://mobile.nixos.org/devices/pine64-pinephone-braveheart.html the device's page].


* ''' What works, what does not work '''
'''What works, what does not work'''


This information may change, but currently it boots, it's as compatible as the Android-based devices are with Mobile NixOS. It even supports a bit more since it can use Wi-Fi.
This information may change, but currently it boots, it's as compatible as the Android-based devices are with Mobile NixOS. It even supports a bit more since it can use WiFi.


<cite>
Support for all of the hardware will be coming, this project is a breadth-first work, where the work spans multiple devices in parallel.
Support for all of the hardware will be coming, this project is a breadth-first work, where the work spans multiple devices in parallel.
</cite>


* ''' How to contribute and report defects '''
'''How to contribute and report defects'''
 
On [https://github.com/NixOS/mobile-nixos/issues the project's repository]. Please specify that you are using a PinePhone when reporting issues. Details about contributions and donations are on the [https://nixos.org/nixos/community.html NixOS website].
On [https://github.com/NixOS/mobile-nixos/issues the project's repository]. Please specify that you are using a PinePhone when reporting issues. Details about contributions and donations are on the [https://nixos.org/nixos/community.html NixOS website].


== LuneOS ==
== OpenMandriva Lx ==
<!--http://files.pine64.org/sw/pine64_installer/json/luneos.jpg-->
{{Hint| Note: This image is solely for testing purposes.}}
 
OpenMandriva Lx with Plasma Mobile as UI.
 
'''Download location'''
 
The official image can be found [https://sourceforge.net/projects/openmandriva/files/release/4.2/RC/Pinephone/ here]. See [https://www.openmandriva.org/en/news/article/openmandriva-lx-4-2-rc-available-for-testing here] for the announcement.
 
== openSUSE ==
<div style=float:right>[[Image:SLEM-OS-logo.png|100px|link=https://www.opensuse.org/]]</div>
 
Our images use the same [https://en.opensuse.org/Portal:Tumbleweed openSUSE Tumbleweed] base as our desktop images, except what needs to be changed for the PinePhone. The images include <i>zypper</i> (RPM) as the default package manager and have access to virtually the same (open source) software as our desktop repositories, thanks to the [https://en.opensuse.org/Portal:Factory Factory] ports. Using [https://en.opensuse.org/SDB:DNF dnf] is possible, if preferred.
 
'''Download links'''
 
* [https://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/PinePhone/images/openSUSE-Tumbleweed-ARM-PHOSH-pinephone.aarch64.raw.xz Phosh] / [https://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/PinePhone/images/openSUSE-Tumbleweed-ARM-PHOSH-pinephone.aarch64.raw.xz.sha256 SHA-256] / [https://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/PinePhone/images/openSUSE-Tumbleweed-ARM-PHOSH-pinephone.aarch64.raw.xz.sha256.asc SHA-256 Signature]
* [https://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/PinePhone/images/openSUSE-Tumbleweed-ARM-PLAMO-pinephone.aarch64.raw.xz Plasma Mobile] / [https://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/PinePhone/images/openSUSE-Tumbleweed-ARM-PLAMO-pinephone.aarch64.raw.xz.sha256 SHA-256] / [https://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/PinePhone/images/openSUSE-Tumbleweed-ARM-PLAMO-pinephone.aarch64.raw.xz.sha256.asc SHA-256 Signature]
 
To verify the images you need to import [https://build.opensuse.org/projects/devel:ARM:Factory:Contrib:PinePhone/public_key our GPG key]. Keep on mind that the first boot may stay on black screen for about a minute - consequent boots should be faster.
 
You can find install instructions at [https://en.opensuse.org/HCL:PinePhone#Installing_openSUSE_in_a_Pinephone this section] in the openSUSE Wiki.
 
'''Username/Password'''
 
The login credentials are pine/1234 and root/linux. Change (or disable) the root password once you are set up.
 
'''What works and what does not work'''
 
You can find all information about the releases of the project [https://gitlab.com/slem.os/slem.os/-/blob/master/CHANGELOG.md here].
Detailed information, tips and troubleshooting suggestions are also provided at [https://en.opensuse.org/HCL:PinePhone the openSUSE Wiki].
You will also find information in our wiki on how to report issues (Contributing section).
 
== postmarketOS ==
<div style=float:right>[[File:PostmarketOS-logo.png|100px]]</div>
 
postmarketOS extends [https://www.alpinelinux.org/ Alpine Linux] to run on smartphones and other mobile devices.
It offers various user interfaces (Phosh, Plasma Mobile, Sxmo, Plasma Desktop, Gnome 3, Kodi, XFCE4, ...).
 
As of writing, official images are provided with Phosh, Plasma Mobile and Sxmo. The official images come in two flavors, either as demo image to try out postmarketOS, or with the installer.
 
When using the installer images (recommended), it is possible to:
* encrypt your installation
* install from the SD card to eMMC
 
Power users may also create their own image with the distribution's install and development tool <code>pmbootstrap</code>.
 
Please read the detailed [https://wiki.postmarketos.org/wiki/PINE64_PinePhone_(pine64-pinephone)#Installation installation instructions] in the wiki.
 
'''Download location'''
 
* [https://postmarketos.org/download/ Download page]
* [https://wiki.postmarketos.org/wiki/PINE64_PinePhone_(pine64-pinephone)#Installation Flashing instructions]
 
'''Username/password'''
 
user/147147
 
This is for demo images only - when using the installer images or building an image with pmbootstrap, you set your own username and password. The Phosh and Plasma Mobile lock screens require your password, but they only present a numeric keyboard, so you should use '''only''' numbers in your password.
 
'''What works, what does not work'''
 
See the [https://gitlab.com/postmarketOS/pmaports/-/issues?label_name%5B%5D=device-pine64-pinephone issue tracker].
 
'''How to contribute and report defects'''
 
[https://gitlab.com/postmarketOS/pmaports/-/issues?label_name%5B%5D=device-pine64-pinephone postmarketOS issue tracker] for PinePhone support. See [https://wiki.postmarketos.org/wiki/Contributing postmarketOS wiki] for options to contribute.
 
== PureOS ==
<div style=float:right>[[File:Pureos.png|100px]]</div>
 
{{Warning|This project is no longer under development and has been abandoned.}}
 
{{Hint|There is no prebuilt image, you'll need a Linux environment and build the image yourself.}}
 
[https://www.pureos.net/ PureOS] is a user friendly, secure and freedom respecting GNU/Linux distribution based on Debian Buster and GNOME developed by the Purism community.
 
* [https://tracker.pureos.net/w/ PureOS Wiki], no PinePhone page there
* Mobile-optimized apps list from the [https://tracker.pureos.net/w/pureos/mobile_optimized_apps/ Software Center in PureOS] and [https://tracker.pureos.net/w/pureos/3rd-party_mobile_optimized_apps/ 3rd party repos]
* [https://github.com/rufferson/pureos-pinephone current PinePhone PureOS repo], A script to convert Librem5 PureOS to PinePhone Pure-OS
 
'''Download location'''
 
Use [https://raw.githubusercontent.com/rufferson/pureos-pinephone/master/build_image.sh the convert script] to download and build the image from u-boot, PinePhone linux kernel and Librem5 PureOS.
 
Also see:
* [https://forums.puri.sm/t/successful-installation-of-pureos-on-pinephone/8741/12 Successful installation of PureOS on PinePhone - PureOS - Purism community]
* The PureOS section of [https://www.ruff.mobi/go/mobi/pine.html PinePhone page] on ruff.mobi
* An [https://gitlab.com/a-wai/debos-pinephone archived repo] for PureOS on PinePhone
* A [https://mozzwald.com/pp/ file list] with [https://mozzwald.com/pp/pureos-pinephone-build-instructions.txt pureos pinephone build instructions] on mozzwald.com
 
== Sailfish OS ==
<div style=float:right>[[File:Sailfish_logo.png|150px]]</div>
 
[https://sailfishos.org/ Sailfish OS] is a Linux-based operating system based on open source projects such as [https://wiki.merproject.org/wiki/Main_Page Mer], and a closed source UI based on [https://sailfishos.org/wiki/Lipstick Lipstick].
 
* [https://wiki.merproject.org/wiki/Adaptations/PinePhone64 PinePhone Wiki Page] on Mer Wiki, for both Nemo Mobile and Sailfish OS.
* [https://gitlab.com/pinephone-sailfish-os/linux-kernel/ Linux kernel config repo]
* [https://gitlab.com/sailfishos-porters-ci/dont_be_evil-ci/ Sailfish OS repo]
 
'''Download location'''
 
'''Flashing script'''
 
The Sailfish OS image is built on Gitlab CI. The latest image can be installed using the [https://raw.githubusercontent.com/sailfish-on-dontbeevil/flash-it/master/flash-it.sh flashing script].
 
The script downloads the image and bootloader from the CI, extracts everything and burns it onto the SD card. Note: The script will format and erase the SD card!
 
Instructions:
# Download the flashing script
# Insert a microSD card in your device
# Make the script executable: <code>chmod +x flash-it.sh</code>
# Verify that you have the <code>bsdtar</code> package installed
# Execute it: <code>./flash-it.sh</code>
# Follow the instructions. Some commands in the script require root permissions (for example: mounting and flashing the SD card).
 
* When asked where to flash, type 'raw' and it will build the image on your computer. Otherwise define the path /dev/....  to flash to card or internal emmc.
 
 
'''username/password'''
 
Set PIN on initialization.
 
* Sometimes the first run stalls before the tutorial. Reboot and it will start from setting the security pin.
* The homescreen may be locked unless you boot with a sim card inserted. An old expired sim will do. '''If you do not have a SIM card on hands, do NOT set a security code on first boot.'''
* When a screen with a loading circle is displayed, just left/right swipe it away.
* If you're not familiar with Sailfish OS, pay attention to the tutorial - the interface works great, but is not immediately obvious. If you are familiar with it, you can skip the tutorial by touching all 4 corners starting top left.
 
'''What works, what does not work'''
 
See the [https://wiki.merproject.org/wiki/Adaptations/PinePhone64#Hardware_Support Hardware Support section] on the Mer Wiki's PinePhone Page.
 
There is a limited selection of apps available from the Jolla store, the vast majority are hosted on openrepos.net. If the Storeman app for openrepos is not preinstalled, download the RPM and click to install.
 
'''How to contribute and report defects'''
 
See the [https://wiki.merproject.org/wiki/Adaptations/PinePhone64#Installation Installation section] on the Mer Wiki's PinePhone Page for compile, build and development.
 
Git repo links are at the top of this OS section. other repos that may be helpful:


Based on WebOS by LG, comes with Luna Next desktop environment.
* [https://github.com/sailfish-on-dontbeevil GitHub project page]
* [https://github.com/sailfish-on-dontbeevil/flash-it the repo of the flash-it.sh flashing script]
* [https://build.merproject.org/project/show/nemo:devel:hw:pine:dontbeevil Mer Open Build Service page] ([https://forum.sailfishos.org/t/changes-needed-to-merge-the-project-names-to-sailfish-os/1672 Mer is being assimilated into Sailfish OS] and [https://forum.sailfishos.org/t/obs-shut-down-and-next-steps/1814 OBS is shutting down], also see [https://specs.openstack.org/openstack/fuel-specs/specs/7.0/replace-obs.html OpenStack is replacing OBS with another build system based on Jenkins], if it's related, even OBS come back under Sailfish OS, it will be different.)


* ''' Download location '''
See the [https://sailfishos.org/wiki/Collaborative_Development#Reporting_issues Sailfish OS wiki] for links to their forum, as well as info required when reporting an issue. See the [https://sailfishos.org/wiki/SailfishOS Sailfish OS wiki main page] for options to contribute to Sailfish OS.
[http://build.webos-ports.org/luneos-testing/images/pinephone/ LuneOS test image for PinePhone]
Tofe recommends using bmaptool ; for example "bmaptool copy http://build.webos-ports.org/luneos-testing/images/pinephone/luneos-dev-image-pinephone-testing-0-15.rootfs.wic.gz /dev/mmcblk0". Rename .wic file to .img for standard dd usage.  


* ''' username/password '''
'''Notes'''


* ''' What works, what does not work '''
OTA is supported: <code>zypper refresh && zypper update</code> as root (<code>devel-su</code> to get root access). Things that need reflash are bootloader specific at the moment. If improvements like [[Crust]] or changes of partition layout are added, then you need to reflash.


* ''' How to contribute and report defects '''
== SkiffOS ==
<div style=float:right>[[File:SkiffOS-Icon-1.png|100px]]</div>


== Sxmo ==
Minimal in-memory cross-compiled OS optimized for hosting multiple in parallel Docker containers.


A collection of Suckless programs to create a mobile UI. Based on Postmarket OS
Provides the reliability of firmware with the ease-of-use of package managers.


* ''' Download location '''
Upgrade over-the-air via a simple rsync script, or copying 3 files.
Sxmo images can be found [http://images.lrdu.org/pinephone/ here].


* ''' username/password '''
Uses the [http://buildroot.org Buildroot] cross-compilation tool for support for all Pine64 boards.
mo/mo


* ''' What works, what does not work '''
Use configuration packages to configure distro:
* core/pinephone_neon: KDE Neon via Ubuntu repositories
* core/pinephone_nixos: Nixos Mobile
* core/pinephone_gentoo: Gentoo with Link-time Optimization & KDE Mobile or Phosh
* core/pinephone_ubports: Ubuntu Ports for PinePhone
* core/pinephone_manjaro_kde: Manjaro for PinePhone: KDE variant
* core/pinephone_manjaro_phosh: Manjaro for PinePhone: Phosh variant
* core/pinephone_manjaro_lomiri: Manjaro for PinePhone: Lomiri variant


PinePhone's backlight turns off at 2/10 brightness.


* ''' How to contribute and report defects '''
The boot-up OS is upgraded independently from the containers.


All the contributing information is [https://git.sr.ht/~mil/sxmo-docs/tree/master/CONTRIBUTING.md here].
'''Download location'''


== openSUSE ==
The repository and instructions can be found [https://github.com/skiffos/SkiffOS/tree/master/configs/pine64/phone here].
[[File:SLEM-OS-logo.png|100px]]


openSUSE running on the PinePhone
== Sxmo ==


* ''' Download location '''
A collection of Suckless programs to create a mobile UI. Based on postmarketOS
Offical openSUSE images can be found [https://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/PinePhone/images/ here].


Nightly images [https://download.opensuse.org/repositories/home:/alefnode:/devel:/ARM:/Factory:/Contrib:/PinePhone/images/ here].
'''Download location'''


CI/CD for nightly slemos images [https://jenkins.alefnode.com/job/public/job/slemos-imagebuilder/ here].
Sxmo images can be found [https://images.postmarketos.org/bpo/ here] (in the <i>/pine64-pinephone/sxmo/</i> sections respectively).


* ''' username/password'''
'''username/password'''
pine/1234


* ''' What works, what does not work '''
user/147147
You can find all information about the progress of the project [https://gitlab.com/slem.os/slem.os/-/blob/master/CHANGELOG.md here].


== AVMultiPhone ==
'''How to contribute and report defects'''


AVMultimedia linux running on the PinePhone
All the contributing information is [https://git.sr.ht/~mil/sxmo-docs/tree/master/CONTRIBUTING.md here].


* ''' Download location '''
== Ubuntu Touch ==
<div style=float:right>[[File:Ubports-logo.png|100px]]</div>


https://de.osdn.net/projects/avmultimedia/releases/
A Mobile Version of the Ubuntu Operating System made and maintained by the UBports Community.


* ''' username/password'''
Ubuntu touch is a mobile version of Ubuntu developed by the UBports community. Installation instructions can be found on [https://gitlab.com/ubports/community-ports/pinephone#how-do-i-install-ubuntu-touch-on-my-pinephone the UBports PinePhone project]. There is also a [https://github.com/goddard/pinephone/ script] to download the latest image and flash to your PinePhone. In the future, Ubuntu Touch will be able to be installed onto the PinePhone with the [https://devices.ubuntu-touch.io/installer UBports installer] GUI tool.
archivista/1234


* ''' What works, what does not work '''
'''Download location'''


All linux applications (Firefox, LibreOffice, Gimp, Inkscape, Kodi etc.). Phone calls and SMS (text messages), primitiv acces to camera (1280x720).
[https://gitlab.com/ubports/community-ports/pinephone#how-do-i-install-ubuntu-touch-on-my-pinephone UBports PinePhone project]


AVMultiPhone offers a classic Linux desktop (Mate) on the PinePhone. The basis is PostmarketOS. In contrast to other PinePhone distributions, AVMultiPhone offers real Linux feeling without sacrificing the functionality of a smartphone.
'''username/password'''


Set up during boot


== GloDroid ==
'''What works, what does not work'''


A fully open source port of Android to the PinePhone
Scroll down to the bottom of [https://gitlab.com/ubports/community-ports/pinephone this page].


* ''' Download location '''
'''How to contribute and report defects'''


https://github.com/GloDroid/glodroid_manifest/releases
See [https://gitlab.com/ubports/community-ports/pinephone UBports gitlab page]. See [https://ubports.com/foundation/sponsors UBports website] for how to donate.


* ''' username/password'''
= Tools =
* ''' What works, what does not work '''
WiFi, screen dimming, touchscreen and charging all work. No Bluetooth support yet.


== Multi-boot image with 13 distributions ==
There are software tools, that can be booted on the PinePhone.


The purpose of this image is for users to easily try many of the above Linux distributions, without having to figure out how to flash them individually and juggle with many uSD cards.
== JumpDrive ==


More information can be found at:
JumpDrive can be used to flash the eMMC (and the microSD card), see [[PinePhone Installation Instructions#Using JumpDrive]].


https://xnux.eu/p-boot-demo/
See https://github.com/dreemurrs-embedded/Jumpdrive/releases for the latest image. Make sure to download the "PinePhone" image and to unpack the archive before flashing.


= Factory Test OS =
= Factory Test OS =
On the BraveHeart model there was a pmOS based basic factory test OS pre-installed on the eMMC. Martijn Braam from pmOS has improved the functionality of the image considerably.


Since the 20200501 version it is able to test all the hardware.  It also includes functionality to install a new OS to the eMMC when using with an test image that includes that OS image. The downloadable image just does the hardware tests.
{{Hint|'''Note:''' The magnetometer test will fail on the new Beta Edition, as the factory image wasn't updated for it yet.}}


Do not flash eMMC to test your device, just copy it to mSD and test from there. New versions are distributed as part of the pmOS distribution.
On the Braveheart model there was a postmarketOS based basic Factory Test OS pre-installed on the eMMC. The developer Martijn Braam from postmarketOS has improved the functionality of the image considerably later. Since the 20200501 version, it is able to test all the hardware. It also includes functionality to install a new OS to the eMMC when using with an test image that includes that OS image. The downloadable image just does the hardware tests. Do not flash eMMC to test your device, just dd it to microSD and test from there. New versions are distributed as part of the postmarketOS distribution.


Links:
Links:
* [https://images.postmarketos.org/pinephone/ Software Images] (download the latest one that is marked pine-pinephone-YYYYMMDD-factorytestX.img.xz)
[https://images.postmarketos.org/pinephone/ Software Images] (download the latest one that is marked pine-pinephone-YYYYMMDD-factorytestX.img.xz)
* [https://gitlab.com/MartijnBraam/factorytest Git repo]
[https://gitlab.com/MartijnBraam/factorytest Git repo]
* [https://gitlab.com/MartijnBraam/factorytest/-/blob/master/README.rst Documentation]
[https://gitlab.com/MartijnBraam/factorytest/-/blob/master/README.rst Documentation]
 
== Factory-loaded OS builds ==
 
These are different operating system builds that was preloaded in the factory with testing utility.
 
Download the build, extract the image and dd it to the microSD and then insert it into the phone. Power up the PinePhone, perform and complete the test routine, then apply the build from microSD card to eMMC.
 
dd the image on a 8 GB microSD card or larger.
 
{| class="wikitable"
! OS
! Download
! File Size
! MD5
|-
| Beta Edition
| [https://files.pine64.org/os/PinePhone/BetaEdition/pine64-pinephone-plamo-beta-factorytest.img.xz Direct download from pine64.org]
| 1.78GB
| f16bce93504a52217540ac886863a418
|-
| Mobian
| [https://files.pine64.org/os/PinePhone/Mobian/pine64-pinephone-20201207-factorytest-mobian.img.xz Direct download from pine64.org]
| 1.41GB
| 015be381ff4e650a7fca6d4eaa90d63d
|-
| KDE
| [https://files.pine64.org/os/PinePhone/KDE/pine64-pinephone-20201208-factorytest-kde.img.xz Direct download from pine64.org]
| 2.28GB
| 32979ff17b5ec4d358ce99f1aff0c77c
|-
| Manjaro
| [https://files.pine64.org/os/PinePhone/Manjaro/pine64-pinephone-20201013-manjaro-stable-20201018-factory56.img.xz Direct download from pine64.org]
| 1.04GB
| 4edfd4dceaefdd32a3417c1727161c29
|-
| postmarketOS
| [https://files.pine64.org/os/PinePhone/PostMarketOS/pine64-pinephone-20200726-phosh-v20.05-factory.img.xz Direct download from pine64.org]
| 517MB
| 244093be2f6d728fcbd1d29114607727
|-
| Ubuntu Touch
| [https://files.pine64.org/os/PinePhone/UBPorts/PinePhone-flasher-ubuntu-7b.img.gz Direct download from pine64.org]
| 1.05GB
| 2d7f5271e7a281db8f1b1219bedbe131
|}


= Installing other ARM64 distributions =
= Installing other ARM64 distributions =
'''Warning:''' Distributions not on this page may not even boot after you follow this section. In the best case, they will be barely usable. This is more for fun, or if you would like to port a new distribution to the PinePhone.


'''Note:''' This section uses megi's kernel releases, and not the official ones from PINE64. While it is possible to use the official (and in the future, mainline) kernel, megi provides binary releases, which makes it very easy.
{{Warning|Distributions not on this page may not even boot after you follow this section. In the best case, they will be barely usable. This is more for fun, or if you would like to port a new distribution to the PinePhone.}}
 
{{Hint|'''Note:''' This section uses megi's kernel releases, and not the official ones from Pine64. While it is possible to use the official (and in the future, mainline) kernel, megi provides binary releases, which makes it very easy.}}
 
If you would like to see specific commands for how to complete these steps, see:
* https://github.com/nikhiljha/pp-fedora-sdsetup (an example for Fedora) or
* https://xnux.eu/howtos/install-arch-linux-arm.html (an example for Arch Linux).


If you would like to see specific commands for how to complete these steps, see https://github.com/nikhiljha/pp-fedora-sdsetup (an example for Fedora) or https://xnux.eu/howtos/install-arch-linux-arm.html (an example for Arch Linux).
General step:


# Create a boot (from 4 MB to about 252 MB) and root (from 252 MB to the end of the card) filesystem on the SD card.
# Create a boot (from 4 MB to about 252 MB) and root (from the end of boot to the end of the card) filesystem on the SD card.
# Format the boot partition with vfat, and the root partition with f2fs.
# Format the boot partition with vfat, and the root partition with a supported filesystem like ext4 or f2fs.
# Extract the root filesystem from your distribution's ARM image into the root filesystem on the SD card. Do not copy the partition, copy the files (in archive mode: like rsync -ar).
# Extract the root filesystem from your distribution's ARM image into the root filesystem on the SD card. Do not copy the partition, copy the files (in archive mode: like <code>rsync -ar</code>).
# Edit /etc/fstab to match your partitions.
# Edit <code>/etc/fstab</code> to match your partitions.
# Grab megi's kernel from https://xff.cz/kernels/ (you probably want 5.6 or later).
# Grab megi's kernel from https://xff.cz/kernels/
# Follow the README instructions, which involves copying the kernel modules into the SD card rootfs and writing u-boot and the bootloader.
# Follow the README instructions, which involves copying the kernel modules into the SD card rootfs, and writing u-boot and the bootloader.


= Other Resources =
= Other Resources =
Line 406: Line 632:


Hardware information
Hardware information
* [[PinePhone|General PinePhone hardware info]] in this Pine64 wiki.
* [[PinePhone|General PinePhone hardware info]] in this Pine64 wiki
* [[PinePhone_v1.1_-_Braveheart|PinePhone 1.1 BraveHeart hardware details]] (details specific to the BraveHeart Edition).
* Details specific to the Braveheart Edition: [[PinePhone_v1.1_-_Braveheart|PinePhone 1.1 Braveheart hardware details]]
* [[PinePhone_v1.2|PinePhone 1.2 hardware details]] (details specific to the Community Edition).
* Details specific to the Community Edition: [[PinePhone_v1.2|PinePhone 1.2 hardware details]]
* The postmarketOS wiki has a detailed page on the PinePhone hardware [https://wiki.postmarketos.org/wiki/PINE64_PinePhone_(pine64-pinephone) here,] and the preceding devkit [https://wiki.postmarketos.org/wiki/PINE64_Don%27t_be_evil_devkit_(pine64-dontbeevil) here].
* The postmarketOS wiki has a detailed page on the PinePhone hardware [https://wiki.postmarketos.org/wiki/PINE64_PinePhone_(pine64-pinephone) here] and the preceding devkit [https://wiki.postmarketos.org/wiki/PINE64_Don%27t_be_evil_devkit_(pine64-dontbeevil) here]


Other software information
Other software information
* [https://linux-sunxi.org/Main_Page sunxi community wiki]
* [https://linux-sunxi.org/Main_Page sunxi community wiki]
* [https://xnux.eu/devices/pine64-pinephone.html megi feature/driver support matrix]
* [https://xnux.eu/devices/pine64-pinephone.html megi's feature/driver support matrix]
* [https://megous.com/dl/tmp/README.bootui megi bootUI notes (for dualbooting/multibooting)] see demonstration [https://www.youtube.com/watch?v=ZL1GREqoqx8 on YouTube,]
* [https://megous.com/dl/tmp/README.bootui megi bootUI notes (for dualbooting/multibooting)] see demonstration [https://www.youtube.com/watch?v=ZL1GREqoqx8 on YouTube]
* [https://github.com/ayufan-pine64/boot-tools ayufan boot tools]
* [https://github.com/ayufan-pine64/boot-tools ayufan boot tools]


Other
Other
* [https://store.pine64.org/?post_type=product Pine64 shop]
* [https://pine64.com/?post_type=product Pine64 shop]
* [https://www.pine64.org/2020/01/24/setting-the-record-straight-pinephone-misconceptions/ Pine64 blog on blobs]
* [https://www.pine64.org/2020/01/24/setting-the-record-straight-pinephone-misconceptions/ Pine64 blog on blobs]
* [https://tuxphones.com/yet-another-librem-5-and-pinephone-linux-smartphone-comparison/ Martijn Braam Librem 5 comparison, especially covering openness/blobs]
* [https://tuxphones.com/yet-another-librem-5-and-pinephone-linux-smartphone-comparison/ Martijn Braam Librem 5 comparison, especially covering openness/blobs]
* [https://fam-ribbers.com/2019/12/28/State-of-Linux-on-mobile-and-common-misconceptions.html Bart Ribbers blog on Linux distributions and desktop environments on mobile devices]
* [https://fam-ribbers.com/2019/12/28/State-of-Linux-on-mobile-and-common-misconceptions.html Bart Ribbers blog on Linux distributions and desktop environments on mobile devices]
* [https://www.jeffgeerling.com/blog/2019/a2-class-microsd-cards-offer-no-better-performance-raspberry-pi Jeff Geerling on testing micro SD cards]
* [https://www.jeffgeerling.com/blog/2019/a2-class-microsd-cards-offer-no-better-performance-raspberry-pi Jeff Geerling on testing microSD cards]




[[Category:PinePhone]]
[[Category:PinePhone]]

Revision as of 11:08, 19 July 2021

This page contains a list of all available releases for the PinePhone as well as links to other resources.

See PinePhone Installation Instructions on how to install the operating systems. However, if your phone came preloaded with software, Please see PinePhone Updating Instructions

Note: Some releases may not have a good setup for the backlight at low brightness. If configured too low the backlight shuts down completely, but the screen is still displayed and usable in bright front-light.

Software Releases

This is a list of OSes that specifically support the PinePhone, but as support is included in Mainline Linux, in principle any ARM Linux OS can be used, if possible required patches are included.

Arch Linux ARM

Archlinux-logo.png

(Unofficial) Arch Linux ARM with choice of Phosh UI or barebones, currently being maintained by the DanctNIX community (GitHub 1 2).

Download location

Get the latest image here: https://github.com/dreemurrs-embedded/Pine64-Arch/releases

username/password

alarm/123456

What works, what does not work

Most of the things now works, there are some minor issues with Crust.

How to contribute and report defects

Feel free to send us pull requests and report issues on GitHub.

ExpidusOS

A fork of Void Linux with a custom fork of XFCE as the default desktop environment, developed by Midstall Software.

Download location

Check the download page for that latest version, or the image file list for all versions, look for the file name that starts with "pinephone".

username/password

expidus/expidus

What works, what does not work

The ExpidusOS Wiki has a page detailing supported features.

How to contribute and report defects

GitHub: https://github.com/ExpidusOS

Fedora

Fedora-logo.png

An (unofficial) vanilla Fedora rawhide build for aarch64 with megi's kernel and some additional packages to tie it all together. It aims to eventually be an upstream part of the Fedora project, rather than a phone-specific distribution.

See this thread in the forum.

Download location

flashable images or build scripts

There is also an FTP server with full a full Fedora 34 workstation build with phosh: ftp://pine.warpspeed.dk/nightly/pinephone/ (Mount this with something like Nautilus)

username/password

pine/123456

What works, what does not work

WiFi, Bluetooth, SMS, Data, Calls all work!

There are still a few bugs though, and some features don't have driver support yet on any PinePhone distribution.

How to contribute and report defects

Please send your bug reports to the project's issue tracker. Be sure to include logs if applicable! Send us merge requests on Github.

Gentoo

GentooLogo.png

There are unofficial Gentoo overlays with ebuilds for the PinePhone. There are no images - you'll be building it yourself, picking which kernel, bootloader and desktop environment you want to use. You will be using the arm64 version of Gentoo.

Documentation

https://stealthgun.tweakblogs.net/blog/19336/gentoo-on-a-pinephone

https://wiki.gentoo.org/wiki/User:Dr41nU/PinePhone

https://wiki.gentoo.org/wiki/PinePhone (incomplete)

Overlay locations

https://gitlab.com/bingch/gentoo-overlay/

https://github.com/stealthgun/gjdwebserver-overlay/

GloDroid

Warning: Available images are outdated and do not reflect the state of the current developments.

A fully open source port of Android to the PinePhone

Download location

https://github.com/GloDroid/glodroid_manifest/releases

What works, what does not work

Works: WiFi, screen dimming, touchscreen and charging work. Don't work: Bluetooth, Telephony, GPS

LuneOS

LuneOS is a open source mobile operating system based on webOS Open Source Edition(GitHub, previously known as Open webOS) by LG, comes with Luna Next UI, currently developed by WebOS Ports community.

Download location

LuneOS test image for PinePhone

It is recommended to use bmaptool, which is faster than dd, and can decompress archived image files on-the-fly.

Syntax is:

bmaptool copy [from] [to]

For example:

bmaptool copy http://build.webos-ports.org/luneos-testing/images/pinephone/luneos-dev-image-pinephone-testing-0-140.rootfs.wic.gz /dev/mmcblk0

.wic file can be treated as .img file when flashing. You may rename .wic file to .img when using GUI tools that require .img files.

Maemo Leste

Maemoleste-logo.png

Maemo is a trimmed-down version of Debian for mobile devices, originally a collaboration between Nokia and many open source projects (the Maemo community) before Nokia abandoned it. The community now takes full responsibility in developing fully open source Maemo for a variety of mobile devices.

The new version Maemo 7 "Leste" is an ARM64 port of Devuan (Debian without systemd) and runs the mainline Linux kernel. The default user interface stack is Hildon, Xorg, Matchbox WM, and GTK. The current version is Devuan Ascii (Debian Stretch) and they are working on an upgrade to Devuan Beowulf (Debian Buster) as well as simultaneous support for both Devuan and Debian. In addition to the main repository, they announced a community repository. To keep updated they use automation in their package maintenance with jenkins (similar to debian's buildd). Porting packages to Maemo Leste is basically a simple matter of porting to arm64 version of Debian/Devuan, which benefits both projects.

More detailed information can be found on the Maemo Leste wiki, or follow announcements on their website, and check out Frequently Asked Questions.

Download location

Maemo Leste test builds. There is also an image builder, see their wiki for instructions on how to build a custom image.

username/password

root/toor

You may use "sudo" directly.

What works, what does not work

For current status and workarounds please read their PinePhone wiki page, and update as necessary (make sure to notify them of new issues by leaving a report on the project's Github page, see below).

How to contribute and report defects

Most discussion occurs at #maemo-leste on irc.libera.chat. The Maemo website also has an ongoing forum thread for feedback.

All other contact information is listed on the main page of the Maemo wiki. You should submit bug reports on github. To track known issues, you may use these search terms: pinephone, pine64. Learn about development, porting packages, building packages, todo list, and general info on how to package for Debian. Some tasks have funding available.

Manjaro ARM

Error creating thumbnail: File missing

Manjaro is a user-friendly Linux distribution based on the independently developed Arch operating system with the Plasma Mobile desktop environment.

Download location

username/password

manjaro/123456

root/root

What works, what does not work

Note: The Phosh image the boot will load at a TTY login prompt for multiple minutes at the first boot.

See Manjaro's release announcements on their forum.

Recent ones: Phosh, Plasma and Lomiri.

How to contribute and report defects

See the end of the announcement.

Mobian

Debian-logo.png

An unofficial Debian build for ARM64 running with the Phosh user interface (developed by Purism, Phosh uses Wayland instead of Xorg). The base system is pure Debian, with only the GUI applications and a few others (ModemManager, WiFi chip firmware) being built from modified sources (as well as the kernel and u-boot). Current version is Debian Bullseye.

Download location

Nightly / Installer / Stable

Don't forget to extract the image before installing:

$ gzip -d Downloads/mobian-pinephone-*.img.gz

See the project page for specific installation instructions.

username/password

mobian/1234

What works, what does not work

See the project's README file or the wikifor most up to date status.

Check bug tracker for known issues. Questions? Ask on our thread.

How to contribute and report defects

It is recommended that you log your bug reports in the project's issue tracker. As a general rule, issues with third-party apps (even the default ones) should be reported upstream. A Mobian issue would be related to getting the hardware to work on the PinePhone, but if unsure where the issue should be reported just open a ticket or ask. Feel free to pick an open issue to work on, or send a merge request on Gitlab.

Notes

See Mobian for PinePhone or the wiki for additional information regarding screen resolution, USB networking, WiFi hotspot, Chatty and the repository.

Multi-boot demo image

Warning: This is an demo image for testing different OSes before installing a regular image. It is highly discouraged attempting to use the image productively. The kernel is shared across the different OSes and is not being updated.

The purpose of this image is for users to easily try many of the above Linux distributions, without having to figure out how to flash them individually and juggle with many microSD cards.

megi 15-in-1 multi boot Image [SD Boot] [20210602]

  • DD image to microSD card and boot.
  • This is also a good build for charging depleted battery. Just boot up this build with power supply connected, keep the PinePhone charging for 3 hours at power down stage.
  • For more info on this build, please visit PinePhone multi-distro demo image site
  • DD image for 16GB and above microSD card

Nemo Mobile

Nemo mobile.png

Nemo Mobile is the open source build of Sailfish OS with a open source UI called Glacier (Mer Wiki), now based on Manjaro. See their website Nemo Mobile UX team and Mer Wiki page.

You can either install Nemo on any device that already runs Sailfish, or flash a prebuilt image to SD card/emmc on the PinePhone to install.

Download location

Note: See their website for the newest release and installation guides.

Prebuilt images:

First devel image for Manjaro (April 1, 2021):

Nemo with Glacier UX v0.8 (April 27, 2020):

Install Nemo on Sailfish:

Install Sailfish on your PP first (follow instructions on the Sailfish section on this page).

Enable developer mode. In the terminal, run as root (`devel-su`):

ssu ar nemo-devel-ux http://repo.merproject.org/obs/home:/neochapay:/nemo-ux/sailfish_latest_armv7hl/

then:

pkcon refresh

then install the nemo-specific Glacier packages:

pkcon install lipstick-glacier-home-qt5

If necessary, reboot.

What works, what does not work

For the newer devel image based on Manjaro, Wi-Fi and Bluetooth works.

For the older Nemo with Glacier UX v0.8, voicecalls, sound and cameras do not work by default, see its blog post and GitHub repo readme.

How to contribute and report defects

For the Nemo Mobile UX itself:

For hardware:

NixOS

NixOS support is handled through the Mobile NixOS project.

There is no pre-built complete image. For now users are expected to follow the instructions in the Getting Started page, and on the device's page.

What works, what does not work

This information may change, but currently it boots, it's as compatible as the Android-based devices are with Mobile NixOS. It even supports a bit more since it can use WiFi.

Support for all of the hardware will be coming, this project is a breadth-first work, where the work spans multiple devices in parallel.

How to contribute and report defects

On the project's repository. Please specify that you are using a PinePhone when reporting issues. Details about contributions and donations are on the NixOS website.

OpenMandriva Lx

Note: This image is solely for testing purposes.

OpenMandriva Lx with Plasma Mobile as UI.

Download location

The official image can be found here. See here for the announcement.

openSUSE

SLEM-OS-logo.png

Our images use the same openSUSE Tumbleweed base as our desktop images, except what needs to be changed for the PinePhone. The images include zypper (RPM) as the default package manager and have access to virtually the same (open source) software as our desktop repositories, thanks to the Factory ports. Using dnf is possible, if preferred.

Download links

To verify the images you need to import our GPG key. Keep on mind that the first boot may stay on black screen for about a minute - consequent boots should be faster.

You can find install instructions at this section in the openSUSE Wiki.

Username/Password

The login credentials are pine/1234 and root/linux. Change (or disable) the root password once you are set up.

What works and what does not work

You can find all information about the releases of the project here. Detailed information, tips and troubleshooting suggestions are also provided at the openSUSE Wiki. You will also find information in our wiki on how to report issues (Contributing section).

postmarketOS

File:PostmarketOS-logo.png

postmarketOS extends Alpine Linux to run on smartphones and other mobile devices. It offers various user interfaces (Phosh, Plasma Mobile, Sxmo, Plasma Desktop, Gnome 3, Kodi, XFCE4, ...).

As of writing, official images are provided with Phosh, Plasma Mobile and Sxmo. The official images come in two flavors, either as demo image to try out postmarketOS, or with the installer.

When using the installer images (recommended), it is possible to:

  • encrypt your installation
  • install from the SD card to eMMC

Power users may also create their own image with the distribution's install and development tool pmbootstrap.

Please read the detailed installation instructions in the wiki.

Download location

Username/password

user/147147

This is for demo images only - when using the installer images or building an image with pmbootstrap, you set your own username and password. The Phosh and Plasma Mobile lock screens require your password, but they only present a numeric keyboard, so you should use only numbers in your password.

What works, what does not work

See the issue tracker.

How to contribute and report defects

postmarketOS issue tracker for PinePhone support. See postmarketOS wiki for options to contribute.

PureOS

File:Pureos.png
Warning: This project is no longer under development and has been abandoned.
There is no prebuilt image, you'll need a Linux environment and build the image yourself.

PureOS is a user friendly, secure and freedom respecting GNU/Linux distribution based on Debian Buster and GNOME developed by the Purism community.

Download location

Use the convert script to download and build the image from u-boot, PinePhone linux kernel and Librem5 PureOS.

Also see:

Sailfish OS

File:Sailfish logo.png

Sailfish OS is a Linux-based operating system based on open source projects such as Mer, and a closed source UI based on Lipstick.

Download location

Flashing script

The Sailfish OS image is built on Gitlab CI. The latest image can be installed using the flashing script.

The script downloads the image and bootloader from the CI, extracts everything and burns it onto the SD card. Note: The script will format and erase the SD card!

Instructions:

  1. Download the flashing script
  2. Insert a microSD card in your device
  3. Make the script executable: chmod +x flash-it.sh
  4. Verify that you have the bsdtar package installed
  5. Execute it: ./flash-it.sh
  6. Follow the instructions. Some commands in the script require root permissions (for example: mounting and flashing the SD card).
  • When asked where to flash, type 'raw' and it will build the image on your computer. Otherwise define the path /dev/.... to flash to card or internal emmc.


username/password

Set PIN on initialization.

  • Sometimes the first run stalls before the tutorial. Reboot and it will start from setting the security pin.
  • The homescreen may be locked unless you boot with a sim card inserted. An old expired sim will do. If you do not have a SIM card on hands, do NOT set a security code on first boot.
  • When a screen with a loading circle is displayed, just left/right swipe it away.
  • If you're not familiar with Sailfish OS, pay attention to the tutorial - the interface works great, but is not immediately obvious. If you are familiar with it, you can skip the tutorial by touching all 4 corners starting top left.

What works, what does not work

See the Hardware Support section on the Mer Wiki's PinePhone Page.

There is a limited selection of apps available from the Jolla store, the vast majority are hosted on openrepos.net. If the Storeman app for openrepos is not preinstalled, download the RPM and click to install.

How to contribute and report defects

See the Installation section on the Mer Wiki's PinePhone Page for compile, build and development.

Git repo links are at the top of this OS section. other repos that may be helpful:

See the Sailfish OS wiki for links to their forum, as well as info required when reporting an issue. See the Sailfish OS wiki main page for options to contribute to Sailfish OS.

Notes

OTA is supported: zypper refresh && zypper update as root (devel-su to get root access). Things that need reflash are bootloader specific at the moment. If improvements like Crust or changes of partition layout are added, then you need to reflash.

SkiffOS

SkiffOS-Icon-1.png

Minimal in-memory cross-compiled OS optimized for hosting multiple in parallel Docker containers.

Provides the reliability of firmware with the ease-of-use of package managers.

Upgrade over-the-air via a simple rsync script, or copying 3 files.

Uses the Buildroot cross-compilation tool for support for all Pine64 boards.

Use configuration packages to configure distro:

  • core/pinephone_neon: KDE Neon via Ubuntu repositories
  • core/pinephone_nixos: Nixos Mobile
  • core/pinephone_gentoo: Gentoo with Link-time Optimization & KDE Mobile or Phosh
  • core/pinephone_ubports: Ubuntu Ports for PinePhone
  • core/pinephone_manjaro_kde: Manjaro for PinePhone: KDE variant
  • core/pinephone_manjaro_phosh: Manjaro for PinePhone: Phosh variant
  • core/pinephone_manjaro_lomiri: Manjaro for PinePhone: Lomiri variant


The boot-up OS is upgraded independently from the containers.

Download location

The repository and instructions can be found here.

Sxmo

A collection of Suckless programs to create a mobile UI. Based on postmarketOS

Download location

Sxmo images can be found here (in the /pine64-pinephone/sxmo/ sections respectively).

username/password

user/147147

How to contribute and report defects

All the contributing information is here.

Ubuntu Touch

Ubports-logo.png

A Mobile Version of the Ubuntu Operating System made and maintained by the UBports Community.

Ubuntu touch is a mobile version of Ubuntu developed by the UBports community. Installation instructions can be found on the UBports PinePhone project. There is also a script to download the latest image and flash to your PinePhone. In the future, Ubuntu Touch will be able to be installed onto the PinePhone with the UBports installer GUI tool.

Download location

UBports PinePhone project

username/password

Set up during boot

What works, what does not work

Scroll down to the bottom of this page.

How to contribute and report defects

See UBports gitlab page. See UBports website for how to donate.

Tools

There are software tools, that can be booted on the PinePhone.

JumpDrive

JumpDrive can be used to flash the eMMC (and the microSD card), see PinePhone Installation Instructions#Using JumpDrive.

See https://github.com/dreemurrs-embedded/Jumpdrive/releases for the latest image. Make sure to download the "PinePhone" image and to unpack the archive before flashing.

Factory Test OS

Note: The magnetometer test will fail on the new Beta Edition, as the factory image wasn't updated for it yet.

On the Braveheart model there was a postmarketOS based basic Factory Test OS pre-installed on the eMMC. The developer Martijn Braam from postmarketOS has improved the functionality of the image considerably later. Since the 20200501 version, it is able to test all the hardware. It also includes functionality to install a new OS to the eMMC when using with an test image that includes that OS image. The downloadable image just does the hardware tests. Do not flash eMMC to test your device, just dd it to microSD and test from there. New versions are distributed as part of the postmarketOS distribution.

Links: Software Images (download the latest one that is marked pine-pinephone-YYYYMMDD-factorytestX.img.xz) Git repo Documentation

Factory-loaded OS builds

These are different operating system builds that was preloaded in the factory with testing utility.

Download the build, extract the image and dd it to the microSD and then insert it into the phone. Power up the PinePhone, perform and complete the test routine, then apply the build from microSD card to eMMC.

dd the image on a 8 GB microSD card or larger.

OS Download File Size MD5
Beta Edition Direct download from pine64.org 1.78GB f16bce93504a52217540ac886863a418
Mobian Direct download from pine64.org 1.41GB 015be381ff4e650a7fca6d4eaa90d63d
KDE Direct download from pine64.org 2.28GB 32979ff17b5ec4d358ce99f1aff0c77c
Manjaro Direct download from pine64.org 1.04GB 4edfd4dceaefdd32a3417c1727161c29
postmarketOS Direct download from pine64.org 517MB 244093be2f6d728fcbd1d29114607727
Ubuntu Touch Direct download from pine64.org 1.05GB 2d7f5271e7a281db8f1b1219bedbe131

Installing other ARM64 distributions

Warning: Distributions not on this page may not even boot after you follow this section. In the best case, they will be barely usable. This is more for fun, or if you would like to port a new distribution to the PinePhone.
Note: This section uses megi's kernel releases, and not the official ones from Pine64. While it is possible to use the official (and in the future, mainline) kernel, megi provides binary releases, which makes it very easy.

If you would like to see specific commands for how to complete these steps, see:

General step:

  1. Create a boot (from 4 MB to about 252 MB) and root (from the end of boot to the end of the card) filesystem on the SD card.
  2. Format the boot partition with vfat, and the root partition with a supported filesystem like ext4 or f2fs.
  3. Extract the root filesystem from your distribution's ARM image into the root filesystem on the SD card. Do not copy the partition, copy the files (in archive mode: like rsync -ar).
  4. Edit /etc/fstab to match your partitions.
  5. Grab megi's kernel from https://xff.cz/kernels/
  6. Follow the README instructions, which involves copying the kernel modules into the SD card rootfs, and writing u-boot and the bootloader.

Other Resources

Community

Hardware information

Other software information

Other