Difference between revisions of "PinePhone Sensors and Navigation"

From PINE64
Jump to navigation Jump to search
Line 16: Line 16:
 
=== Quectel EG25G Modem / GNSS Receiver ===
 
=== Quectel EG25G Modem / GNSS Receiver ===
  
[TODO: add interfaces, constraints]
+
[TODO: add interfaces, constraints, antenna location]
  
 
=== Invensense/TDK MPU6050 IMU ===
 
=== Invensense/TDK MPU6050 IMU ===

Revision as of 14:28, 20 March 2021

DRAFT

Overview

The Pinephone contains various components that enable or aid in orientation and navigation tasks.

  • Multi-GNSS Receiver as part of the cellular modem (GPS/Galileo/Glonass/BeiDou)
  • IMU (Inertial Measurment Unit), combined Accelerometer and Gyroscope sensor (MPU6050)
  • Magnetometer (LIS3MDL or AF8133J)

...

[TODO: add block diagram]

Hardware

Quectel EG25G Modem / GNSS Receiver

[TODO: add interfaces, constraints, antenna location]

Invensense/TDK MPU6050 IMU

Key features:

  • Digital-output X-, Y-, and Z-Axis angular rate sensors (gyroscopes) with selectable range of ±250, ±500, ±1000, and ±2000°/sec
  • Digital-output triple-axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
  • 400kHz Fast Mode I2C for communicating with all registers

ST LIS3MDL

Key features:

  • ±4/±8/±12/±16 gauss selectable magnetic full scales
  • 16-bit data output
  • ...

Sensor reference frames

The sensors are mounted on the Pinephone's main board in different positions and orientations, for the purpose of orientation and navigation it is important to know the relationship between the sensor coordinate frames and the body frame of the phone...

[TODO: add sensor mounting positions/orientation in respect to body frame, introduce coordinate systems]

As a basis for software development, a common body coordinate system has to be established along with it's relation to a world coordinate system...

[TODO: explain body reference choices, north-east-down world coordinates]

Software

Drivers

OS level services

Applications

Development