Difference between revisions of "PinePhone Pro"

From PINE64
Jump to navigation Jump to search
Tags: Mobile web edit Mobile edit
Line 37: Line 37:
== Press ==
== Press ==


For an overview about media of the PinePhone you can use for the news, blogs, or similar see [[PinePhone Pro Press]].
For an overview about media of the PinePhone Pro you can use for the news, blogs, or similar see [[PinePhone Pro Press]].


== PinePhone board information, schematics and certifications ==
== PinePhone board information, schematics and certifications ==

Revision as of 22:21, 15 October 2021

Rendering of the PinePhone Pro

The PinePhone Pro is PINE64's flagship smartphone announced in October 2021. It features 4GB of RAM, an 128GB eMMC and is using an Rockchip RK3399S SoC.

Introduction

Specifications

  • Dimensions: 160.8 x 76.6 x 11.1mm
  • Weight: Approx. 215g
  • SIM Card: ?Micro-SIM?
  • Display:
    • Size: 6 inches (151mm) diagonal
    • Type: 1440 x 720 in-cell IPS with Gorilla Glass 4™
    • Resolution: 1440x720, 18:9 ratio
  • System on Chip: Rockchip RK3399S 64bit SoC – 2x A72 and 4x A53 CPU cores @ 1.5GHz
  • RAM: 4GB LPDDR4 @ 800MHz
  • Internal Storage: 128GB eMMC, extendable up to 2TB via microSD, supports SDHC and SDXC
  • Back Camera: 13MP Sony IMX258 with Gorilla Glass 4™ protective layer, LED Flash
  • Front Camera: 5MP OmniVision OV5640 front-facing camera
  • Sound: Loudspeaker, 3.5mm jack & mic (jack doubles as hardware UART if hardware switch 6 is deactivated)
  • Communication:
    • Modem: Quectel EG25-G
    • LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28
    • LTE-TDD: B38, B39, B40, B41
    • WCDMA: B1, B2, B4, B5, B6, B8, B19
    • GSM: B2, B3, B5, B8 (850, 900, 1800, 1900 MHz)
    • WLAN & Bluetooth: AMPAK AP6255 WiFi 11ac + Bluetooth V4.1
    • GNSS: GPS/GLONASS/BeiDou/Galileo/QZSS, with A-GPS
  • Sensors: Accelerometer, gyroscope, proximity, ambient light, compass
  • Privacy switches: Modem, WiFi & Bluetooth, Microphone, Cameras
  • Battery: Lithium-ion, rated capacity 2800mAh (10.64Wh), typical capacity 3000mAh (11.40Wh) (nominally replaceable with any Samsung J7 form-factor battery)
  • I/O: USB Type-C, USB Host, DisplayPort Alternate Mode output, 15W 5V 3A Quick Charge, follows USB PD specification

Components

Press

For an overview about media of the PinePhone Pro you can use for the news, blogs, or similar see PinePhone Pro Press.

PinePhone board information, schematics and certifications

Datasheets for components and peripherals

Developer works

  • Megi's blog post about the device

External links